* [U-Boot] espressobin u-boot firmware
@ 2017-11-12 10:36 Matwey V. Kornilov
2017-11-12 11:07 ` Matwey V. Kornilov
0 siblings, 1 reply; 3+ messages in thread
From: Matwey V. Kornilov @ 2017-11-12 10:36 UTC (permalink / raw)
To: u-boot
Hello,
I am trying to follow this thread:
https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot
espressobin from SATA device.
Currently, the only thing what I see when try to boot is the following:
TIM-1.0
After some time, I see > from UART bootloader.
How could I figure out what I did wrong?
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] espressobin u-boot firmware
2017-11-12 10:36 [U-Boot] espressobin u-boot firmware Matwey V. Kornilov
@ 2017-11-12 11:07 ` Matwey V. Kornilov
2017-11-13 15:49 ` Matwey V. Kornilov
0 siblings, 1 reply; 3+ messages in thread
From: Matwey V. Kornilov @ 2017-11-12 11:07 UTC (permalink / raw)
To: u-boot
SATA image from here:
http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive
doesn't even print "TIM-1.0" for me
12.11.2017 13:36, Matwey V. Kornilov пишет:
> Hello,
>
> I am trying to follow this thread:
> https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot
> espressobin from SATA device.
>
> Currently, the only thing what I see when try to boot is the following:
>
> TIM-1.0
>
> After some time, I see > from UART bootloader.
>
> How could I figure out what I did wrong?
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] espressobin u-boot firmware
2017-11-12 11:07 ` Matwey V. Kornilov
@ 2017-11-13 15:49 ` Matwey V. Kornilov
0 siblings, 0 replies; 3+ messages in thread
From: Matwey V. Kornilov @ 2017-11-13 15:49 UTC (permalink / raw)
To: u-boot
When I use ATF tools from armada-17.08 release everything builds and
boots fine. armaba-17.10 seems to be broken(?)
12.11.2017 14:07, Matwey V. Kornilov пишет:
>
> SATA image from here:
>
> http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive
>
> doesn't even print "TIM-1.0" for me
>
> 12.11.2017 13:36, Matwey V. Kornilov пишет:
>> Hello,
>>
>> I am trying to follow this thread:
>> https://www.mail-archive.com/u-boot at lists.denx.de/msg257116.html to boot
>> espressobin from SATA device.
>>
>> Currently, the only thing what I see when try to boot is the following:
>>
>> TIM-1.0
>>
>> After some time, I see > from UART bootloader.
>>
>> How could I figure out what I did wrong?
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://lists.denx.de/listinfo/u-boot
>>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-11-13 15:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-12 10:36 [U-Boot] espressobin u-boot firmware Matwey V. Kornilov
2017-11-12 11:07 ` Matwey V. Kornilov
2017-11-13 15:49 ` Matwey V. Kornilov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox