[U-Boot-Users] pci problem with arm-integrator AP and linux 2.6

[U-Boot-Users] pci problem with arm-integrator AP and linux 2.6

[Thierry Matalini]

I'm having some trouble on running linux with PCI support on my ARM
integrator board.

If I do not put PCI support on the kernel configuration, the kernel
starts and everything works fine, if I just enable the PCI support the
kernel stuck somewhere.

Somebody has an idea on where is the problem ?

Thanks,
Thierry Matalini

[U-Boot-Users] Re: pci problem with arm-integrator AP and linux 2.6

[Catalin Marinas]

Thierry Matalini <thierry.matalini@gmail.com> wrote:
> I'm having some trouble on running linux with PCI support on my ARM
> integrator board.
>
> If I do not put PCI support on the kernel configuration, the kernel
> starts and everything works fine, if I just enable the PCI support the
> kernel stuck somewhere.

Is this U-Boot related? If not, you could try the ARM Linux Kernel
mailing list (and add a bit more details like the full kernel
version).

Catalin

[U-Boot-Users] pci problem with arm-integrator AP and linux 2.6

[Wolfgang Denk]

In message <db724d8f050223073931a47b08@mail.gmail.com> you wrote:
> I'm having some trouble on running linux with PCI support on my ARM
> integrator board.

And what exactly was yourt U-Boot problem?

This mailing list is for U-Boot related questions only.

Best regards,

Wolfgang Denk

-- 
See us @ Embedded World, Nuremberg, Feb 22 - 24,  Hall 10.0 Booth 310
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Leave bigotry in your quarters; there's no room for it on the bridge.
	-- Kirk, "Balance of Terror", stardate 1709.2