From: Francesco Cosoleto <cosoleto@gmail.com>
To: util-linux@vger.kernel.org
Cc: Francesco Cosoleto <cosoleto@gmail.com>
Subject: [PATCH 5/5] tests: update fdisk and blkid MD tests
Date: Wed, 17 Aug 2011 00:19:06 +0200 [thread overview]
Message-ID: <1313533146-2806-5-git-send-email-cosoleto@gmail.com> (raw)
In-Reply-To: <1313533146-2806-1-git-send-email-cosoleto@gmail.com>
Signed-off-by: Francesco Cosoleto <cosoleto@gmail.com>
---
tests/expected/blkid/md-raid0-whole | 11 +++++++----
tests/expected/blkid/md-raid1-part | 11 +++++++----
tests/expected/blkid/md-raid1-whole | 13 ++++++++-----
tests/expected/fdisk/align-512-4K | 24 ++++++++++++++++--------
tests/expected/fdisk/align-512-4K-63 | 24 ++++++++++++++++--------
tests/expected/fdisk/align-512-4K-md | 24 +++++++++++++++---------
tests/expected/fdisk/align-512-512 | 24 ++++++++++++++++--------
tests/expected/fdisk/align-512-512-topology | 24 ++++++++++++++++--------
tests/functions.sh | 1 +
9 files changed, 102 insertions(+), 54 deletions(-)
diff --git a/tests/expected/blkid/md-raid0-whole b/tests/expected/blkid/md-raid0-whole
index 54e4012..83fc54e 100644
--- a/tests/expected/blkid/md-raid0-whole
+++ b/tests/expected/blkid/md-raid0-whole
@@ -3,21 +3,24 @@ Create RAID device
Create partitions on RAID device
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-204543, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-204543, default 204543):
+Last sector, +sectors or +size{K,M,G} (2048-204543, default 204543): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (22528-204543, default 22528): Using default value 22528
Last sector, +sectors or +size{K,M,G} (22528-204543, default 204543): Using default value 204543
+Partition 2 of type Linux and of size 88.9 MiB is set
Command (m for help):
Disk /dev/md8: 104 MB, 104726528 bytes
diff --git a/tests/expected/blkid/md-raid1-part b/tests/expected/blkid/md-raid1-part
index 659f896..df595b8 100644
--- a/tests/expected/blkid/md-raid1-part
+++ b/tests/expected/blkid/md-raid1-part
@@ -1,21 +1,24 @@
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-104447, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-104447, default 104447):
+Last sector, +sectors or +size{K,M,G} (2048-104447, default 104447): Partition 1 of type Linux and of size 25 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (53248-104447, default 53248): Using default value 53248
Last sector, +sectors or +size{K,M,G} (53248-104447, default 104447): Using default value 104447
+Partition 2 of type Linux and of size 25 MiB is set
Command (m for help):
Disk /dev/...: 53 MB, 53477376 bytes
diff --git a/tests/expected/blkid/md-raid1-whole b/tests/expected/blkid/md-raid1-whole
index cbdbb7b..2536a5c 100644
--- a/tests/expected/blkid/md-raid1-whole
+++ b/tests/expected/blkid/md-raid1-whole
@@ -3,21 +3,24 @@ Create RAID device
Create partitions on RAID device
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102271, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102271, default 102271):
+Last sector, +sectors or +size{K,M,G} (2048-102271, default 102271): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (22528-102271, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102271, default 102271):
+Last sector, +sectors or +size{K,M,G} (22528-102271, default 102271): Partition 2 of type Linux and of size 10 MiB is set
+
Command (m for help):
Disk /dev/md8: 52 MB, 52363264 bytes
2 heads, 4 sectors/track, 12784 cylinders, total 102272 sectors
diff --git a/tests/expected/fdisk/align-512-4K b/tests/expected/fdisk/align-512-4K
index ed1e03b..615d609 100644
--- a/tests/expected/fdisk/align-512-4K
+++ b/tests/expected/fdisk/align-512-4K
@@ -1,49 +1,57 @@
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): Partition number (1-4, default 3): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): Selected partition 4
First sector (63488-102399, default 63488): Using default value 63488
Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
+Partition 4 of type Extended and of size 19 MiB is set
Command (m for help): All primary partitions are in use
Adding logical partition 5
First sector (65536-102399, default 65536): Using default value 65536
-Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 6
First sector (77824-102399, default 77824): Using default value 77824
-Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 7
First sector (90112-102399, default 90112): Using default value 90112
Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
+Partition 7 of type Linux and of size 6 MiB is set
Command (m for help):
Disk /dev/...: 52 MB, 52428800 bytes
diff --git a/tests/expected/fdisk/align-512-4K-63 b/tests/expected/fdisk/align-512-4K-63
index 261f54c..63cef9c 100644
--- a/tests/expected/fdisk/align-512-4K-63
+++ b/tests/expected/fdisk/align-512-4K-63
@@ -1,49 +1,57 @@
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (7-102399, default 7): Using default value 7
-Last sector, +sectors or +size{K,M,G} (7-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (7-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (20487-102399, default 20487): Using default value 20487
-Last sector, +sectors or +size{K,M,G} (20487-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (20487-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): Partition number (1-4, default 3): First sector (40967-102399, default 40967): Using default value 40967
-Last sector, +sectors or +size{K,M,G} (40967-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (40967-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): Selected partition 4
First sector (61447-102399, default 61447): Using default value 61447
Last sector, +sectors or +size{K,M,G} (61447-102399, default 102399): Using default value 102399
+Partition 4 of type Extended and of size 20 MiB is set
Command (m for help): All primary partitions are in use
Adding logical partition 5
First sector (61454-102399, default 63487): Using default value 63487
-Last sector, +sectors or +size{K,M,G} (63487-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (63487-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 6
First sector (61454-102399, default 75775): Using default value 75775
-Last sector, +sectors or +size{K,M,G} (75775-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (75775-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 7
First sector (61454-102399, default 88063): Using default value 88063
Last sector, +sectors or +size{K,M,G} (88063-102399, default 102399): Using default value 102399
+Partition 7 of type Linux and of size 7 MiB is set
Command (m for help):
Disk /dev/...: 52 MB, 52428800 bytes
diff --git a/tests/expected/fdisk/align-512-4K-md b/tests/expected/fdisk/align-512-4K-md
index 7de6d2e..3a0e7d5 100644
--- a/tests/expected/fdisk/align-512-4K-md
+++ b/tests/expected/fdisk/align-512-4K-md
@@ -1,25 +1,28 @@
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 20 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (43008-102399, default 43008): Using default value 43008
Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Using default value 102399
+Partition 2 of type Linux and of size 29 MiB is set
Command (m for help):
Disk /dev/...: 52 MB, 52428800 bytes
@@ -43,25 +46,28 @@ Alignment offsets:
Create partitions (MD)
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-100095, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-100095, default 100095):
+Last sector, +sectors or +size{K,M,G} (2048-100095, default 100095): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (22528-100095, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-100095, default 100095):
+Last sector, +sectors or +size{K,M,G} (22528-100095, default 100095): Partition 2 of type Linux and of size 10 MiB is set
+
Command (m for help):
Disk /dev/md8: 51 MB, 51249152 bytes
2 heads, 4 sectors/track, 12512 cylinders, total 100096 sectors
diff --git a/tests/expected/fdisk/align-512-512 b/tests/expected/fdisk/align-512-512
index 13931d4..7f1cdb9 100644
--- a/tests/expected/fdisk/align-512-512
+++ b/tests/expected/fdisk/align-512-512
@@ -1,45 +1,53 @@
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): Partition number (1-4, default 3): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): Selected partition 4
First sector (63488-102399, default 63488): Using default value 63488
Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
+Partition 4 of type Extended and of size 19 MiB is set
Command (m for help): All primary partitions are in use
Adding logical partition 5
First sector (65536-102399, default 65536): Using default value 65536
-Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 6
First sector (77824-102399, default 77824): Using default value 77824
-Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 7
First sector (90112-102399, default 90112): Using default value 90112
Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
+Partition 7 of type Linux and of size 6 MiB is set
Command (m for help):
Disk /dev/loop0: 52 MB, 52428800 bytes
diff --git a/tests/expected/fdisk/align-512-512-topology b/tests/expected/fdisk/align-512-512-topology
index af86955..3623f0b 100644
--- a/tests/expected/fdisk/align-512-512-topology
+++ b/tests/expected/fdisk/align-512-512-topology
@@ -1,45 +1,53 @@
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
-Changes will remain in memory only, until you decide to write them.
-After that, of course, the previous content won't be recoverable.
-
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
+
+Changes will remain in memory only, until you decide to write them.
+Be careful before using the write command.
+
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (1-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): Partition number (1-4, default 3): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+
Command (m for help): Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): Selected partition 4
First sector (63488-102399, default 63488): Using default value 63488
Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
+Partition 4 of type Extended and of size 19 MiB is set
Command (m for help): All primary partitions are in use
Adding logical partition 5
First sector (65536-102399, default 65536): Using default value 65536
-Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 6
First sector (77824-102399, default 77824): Using default value 77824
-Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399):
+Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+
Command (m for help): All primary partitions are in use
Adding logical partition 7
First sector (90112-102399, default 90112): Using default value 90112
Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
+Partition 7 of type Linux and of size 6 MiB is set
Command (m for help):
Disk /dev/...: 52 MB, 52428800 bytes
diff --git a/tests/functions.sh b/tests/functions.sh
index acfbbee..71ff7da 100644
--- a/tests/functions.sh
+++ b/tests/functions.sh
@@ -398,5 +398,6 @@ function ts_fdisk_clean {
[ x"${DEVNAME}" != x"" ] && sed -i -e "s/\/dev\/${DEVNAME}/\/dev\/.../g" $TS_OUTPUT
sed -i -e 's/Disk identifier:.*//g' \
-e 's/Building a new.*//g' \
+ -e 's/Welcome to fdisk.*//g' \
$TS_OUTPUT
}
--
1.7.3.4
next prev parent reply other threads:[~2011-08-16 22:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-16 22:19 [PATCH 1/5] fdisk: print a message with size and type of created partition Francesco Cosoleto
2011-08-16 22:19 ` [PATCH 2/5] fdisk: print partition deleted message Francesco Cosoleto
2011-08-16 22:19 ` [PATCH 3/5] fdisk: print welcome message Francesco Cosoleto
2011-08-16 22:19 ` [PATCH 4/5] tests: add ts_fdisk_clean function to make fdisk output comparable Francesco Cosoleto
2011-08-16 22:19 ` Francesco Cosoleto [this message]
2011-08-17 11:21 ` [PATCH] fdisk: print a message with size and type of created partition Francesco Cosoleto
2011-08-30 9:00 ` Karel Zak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313533146-2806-5-git-send-email-cosoleto@gmail.com \
--to=cosoleto@gmail.com \
--cc=util-linux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox