[PATCH] virtio-gpu: support blob alignment information

[Sergio Lopez <slp@redhat.com>]

Allow the device to require certain alignment constrains for blob
resources by extending the device configuration with the field
"blob_alignment" and introducing the VIRTIO_GPU_F_BLOB_ALIGNMENT
feature.

Signed-off-by: Sergio Lopez <slp@redhat.com>
---
 device-types/gpu/description.tex | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/device-types/gpu/description.tex b/device-types/gpu/description.tex
index 4435248..8e5258d 100644
--- a/device-types/gpu/description.tex
+++ b/device-types/gpu/description.tex
@@ -37,6 +37,8 @@ \subsection{Feature bits}\label{sec:Device Types / GPU Device / Feature bits}
   resources is supported.
 \item[VIRTIO_GPU_F_CONTEXT_INIT (4)] multiple context types and
   synchronization timelines supported.  Requires VIRTIO_GPU_F_VIRGL.
+\item[VIRTIO_GPU_F_BLOB_ALIGNMENT (5)] configuration field
+  \field{blob_alignment} is valid. Requires VIRTIO_GPU_F_RESOURCE_BLOB.
 \end{description}
 
 \subsection{Device configuration layout}\label{sec:Device Types / GPU Device / Device configuration layout}
@@ -52,6 +54,7 @@ \subsection{Device configuration layout}\label{sec:Device Types / GPU Device / D
         le32 events_clear;
         le32 num_scanouts;
         le32 num_capsets;
+        le32 blob_alignment;
 };
 \end{lstlisting}
 
@@ -67,6 +70,8 @@ \subsubsection{Device configuration fields}
   supported by the device.  Minimum value is 1, maximum value is 16.
 \item[\field{num_capsets}] specifies the maximum number of capability
   sets supported by the device.  The minimum value is zero.
+\item[\field{blob_alignment}] specifies the byte alignment required by
+  the device for resource blobs.
 \end{description}
 
 \subsubsection{Events}
@@ -672,6 +677,9 @@ \subsubsection{Device Operation: controlq}\label{sec:Device Types / GPU Device /
 resource. There is no restriction on the image/buffer view the driver
 has on the blob resource.
 
+If VIRTIO_GPU_F_BLOB_ALIGNMENT is set, \field{size} must be aligned to
+\field{blob_alignment} as defined in the device configuration.
+
 \item[VIRTIO_GPU_CMD_SET_SCANOUT_BLOB] sets scanout parameters for a
    blob resource. Request data is
   \field{struct virtio_gpu_set_scanout_blob}. Response type is
@@ -776,6 +784,10 @@ \subsubsection{Device Operation: controlq (3d)}\label{sec:Device Types / GPU Dev
 };
 \end{lstlisting}
 
+If VIRTIO_GPU_F_BLOB_ALIGNMENT is set, \field{padding} and \field{offset}
+must be aligned to \field{blob_alignment} as defined in the device
+configuration.
+
 \item[VIRTIO_GPU_CMD_RESOURCE_UNMAP_BLOB] unmaps a
   host-only blob resource from the host visible memory region. Request data
   is \field{struct virtio_gpu_resource_unmap_blob}.  Response type is
-- 
2.49.0