Discussion of the implementations of VIRTIO specification
 help / color / mirror / Atom feed
From: Tiwei Bie <tiwei.bie@intel.com>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: cohuck@redhat.com, stefanha@redhat.com, pbonzini@redhat.com,
	virtio-dev@lists.oasis-open.org, dan.daly@intel.com,
	alexander.h.duyck@intel.com, mark.d.rustad@intel.com,
	cunming.liang@intel.com, zhihong.wang@intel.com
Subject: Re: [virtio-dev] [PATCH v3] content: support SR-IOV
Date: Thu, 24 May 2018 08:06:41 +0800	[thread overview]
Message-ID: <20180524000641.GA23755@debian> (raw)
In-Reply-To: <20180523223204-mutt-send-email-mst@kernel.org>

On Wed, May 23, 2018 at 10:34:29PM +0300, Michael S. Tsirkin wrote:
> On Wed, May 23, 2018 at 08:54:47PM +0300, Michael S. Tsirkin wrote:
> > On Tue, May 22, 2018 at 06:26:15PM +0800, Tiwei Bie wrote:
> > > Allocate a feature bit for virtio devices which support SR-IOV.
> > > 
> > > Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> > > Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> > > Fixes: https://github.com/oasis-tcs/virtio-spec/issues/11
> > > ---
> > > More details can be found from this thread:
> > > https://patchwork.kernel.org/patch/10285541/
> > > 
> > > This patch needs below patch applied first:
> > > https://github.com/oasis-tcs/virtio-spec/issues/10
> > > https://lists.oasis-open.org/archives/virtio-dev/201805/msg00046.html
> > > 
> > > v2 -> v3:
> > > - Improve the wording (Cornelia);
> > > 
> > > v1 -> v2:
> > > - s/Reserve/Allocate/ (MST);
> > > - Add a Fixes tag (MST);
> > > - Be more explicit in driver requirement (MST);
> > > - Remove the "device MAY fail" description (MST);
> > > - Rebase on IO_BARRIER patch;
> > > 
> > > RFC -> v1:
> > > - Mention PCI in the description (Cornelia);
> > > 
> > >  content.tex | 15 +++++++++++++--
> > >  1 file changed, 13 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/content.tex b/content.tex
> > > index 95c243f..e9e6f9a 100644
> > > --- a/content.tex
> > > +++ b/content.tex
> > > @@ -95,10 +95,10 @@ Feature bits are allocated as follows:
> > >  \begin{description}
> > >  \item[0 to 23] Feature bits for the specific device type
> > >  
> > > -\item[24 to 36] Feature bits reserved for extensions to the queue and
> > > +\item[24 to 37] Feature bits reserved for extensions to the queue and
> > >    feature negotiation mechanisms
> > >  
> > > -\item[37 and above] Feature bits reserved for future extensions.
> > > +\item[38 and above] Feature bits reserved for future extensions.
> > >  \end{description}
> > >  
> > >  \begin{note}
> > > @@ -5357,6 +5357,9 @@ Descriptors} and \ref{sec:Packed Virtqueues / Indirect Flag: Scatter-Gather Supp
> > >    better performance.  This feature indicates whether
> > >    a stronger form of barrier suitable for hardware
> > >    devices is necessary.
> > > +  \item[VIRTIO_F_SR_IOV(37)] This feature indicates that
> > > +  the device supports Single Root I/O Virtualization.
> > > +  Currently only PCI devices support this feature.
> > 
> > I guess the assumption is that all VFs and the PF are of the same type?
> > 
> > I feel it might be handy down the road to support mixing
> > types. For this reason, to avoid binding a wrong driver
> > to a VF, I propose that all VFs have this bit too,
> > and require that drivers ignore VFs without this bit.
> > 
> > What do you think?
> 
> Thinking more about it, I can see how this might
> interfere with passing VFs through to legacy nested guests.
> How about reversing it then?
> 
> Require that drivers MUST NOT negotiate VIRTIO_F_SR_IOV
> if device does not have an SRIOV capability or
> is not a PCI device, in particular a VF.

I think driver can accept this feature as long as it's
able to handle the SR-IOV capability and there is no
need for it to check whether the device has the SR-IOV
capability. And device should make sure that it won't
offer this feature if it doesn't present this capability.

How about changing the driver requirement to:

A driver SHOULD accept VIRTIO_F_SR_IOV if it is offered.
If VIRTIO_F_SR_IOV has been negotiated, a driver can
enable virtual functions through the device's PCI SR-IOV
capability structure.  A driver MUST negotiate VIRTIO_F_SR_IOV
and complete the feature negotiation (including setting
the DRIVER_OK \field{status} bit) before enabling virtual
functions through the device's PCI SR-IOV capability
structure.


> 
> And say a device without SRIOV cap SHOULD NOT expose this bit.
> 

No problem. How about:

A device SHOULD offer VIRTIO_F_SR_IOV if it presents a
PCI SR-IOV capability structure.  A device SHOULD NOT
offer VIRTIO_F_SR_IOV if it doesn't presents a PCI SR-IOV
capability structure.

> 
> 
> > >  \end{description}
> > >  
> > >  \drivernormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
> > > @@ -5376,6 +5379,11 @@ A driver SHOULD accept VIRTIO_F_IO_BARRIER if it is offered.
> > >  If VIRTIO_F_IO_BARRIER has been negotiated, a driver MUST use
> > >  the barriers suitable for hardware devices.
> > >  
> > > +A driver SHOULD accept VIRTIO_F_SR_IOV if it is offered.
> > > +If VIRTIO_F_SR_IOV has been negotiated, a driver can
> > > +enable virtual functions through the device's PCI SR-IOV
> > > +capability structure.
> > 
> > I feel the last sentence isn't clear enough.  How about
> > 
> > a driver MUST negotiate VIRTIO_F_SR_IOV and complete the feature
> > negotiation (including setting the DRIVER_OK \field{status} bit) before
> > enabling virtual functions through the device's PCI SR-IOV capability
> > structure.
> > 
> > > +
> > >  \devicenormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
> > >  
> > >  A device MUST offer VIRTIO_F_VERSION_1.  A device MAY fail to operate further
> > > @@ -5392,6 +5400,9 @@ buffers in the same order in which they have been available.
> > >  A device MAY fail to operate further if VIRTIO_F_IO_BARRIER
> > >  is not accepted.
> > >  
> > > +A device SHOULD offer VIRTIO_F_SR_IOV if it presents a PCI
> > > +SR-IOV capability structure.
> > > +
> > >  \section{Legacy Interface: Reserved Feature Bits}\label{sec:Reserved Feature Bits / Legacy Interface: Reserved Feature Bits}
> > >  
> > >  Transitional devices MAY offer the following:
> > 
> > 
> > 
> > > -- 
> > > 2.17.0
> > > 
> > > 
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org


  reply	other threads:[~2018-05-24  0:06 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-22 10:26 [virtio-dev] [PATCH v3] content: support SR-IOV Tiwei Bie
2018-05-22 11:03 ` [virtio-dev] " Cornelia Huck
2018-05-23 17:54 ` [virtio-dev] " Michael S. Tsirkin
2018-05-23 19:34   ` Michael S. Tsirkin
2018-05-24  0:06     ` Tiwei Bie [this message]
2018-05-24 13:44       ` Michael S. Tsirkin
2018-05-24 15:15         ` Tiwei Bie
2018-05-24 15:20           ` Michael S. Tsirkin
2018-05-24 15:27             ` Tiwei Bie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180524000641.GA23755@debian \
    --to=tiwei.bie@intel.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=cohuck@redhat.com \
    --cc=cunming.liang@intel.com \
    --cc=dan.daly@intel.com \
    --cc=mark.d.rustad@intel.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=stefanha@redhat.com \
    --cc=virtio-dev@lists.oasis-open.org \
    --cc=zhihong.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox