Re: [virtio-dev] [PATCH v6] Add virtio rpmb device specification

["Michael S. Tsirkin" <mst@redhat.com>]

On Wed, Oct 09, 2019 at 10:36:51AM +0800, Huang Yang wrote:
> It is a virtio based RPMB (Replay Protected Memory Block) device.
> 
> Signed-off-by: Yang Huang <yang.huang@intel.com>
> Reviewed-by: Bing Zhu <bing.zhu@intel.com>
> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
> 
> v5 -> v6:
> 1. Remove UFS reference, keep eMMC as the only one.
> 2. Update eMMC reference link to a free version.
> 3. Typo fixes.
> 4. Copy normative statements to the normative sections,
>    and rewrite text to Device Operation section.
> 5. Update conformance.

Looks reasonable at this point. Feel free to create a github
issue and request a vote as documented here:
https://github.com/oasis-tcs/virtio-spec/README.md
see section "use of github issues".

> ---
>  conformance.tex  |  24 ++++-
>  content.tex      |   1 +
>  introduction.tex |   3 +
>  virtio-rpmb.tex  | 289 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 316 insertions(+), 1 deletion(-)
>  create mode 100644 virtio-rpmb.tex
> 
> diff --git a/conformance.tex b/conformance.tex
> index 0ac58aa..50969e5 100644
> --- a/conformance.tex
> +++ b/conformance.tex
> @@ -22,7 +22,7 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
>    \begin{itemize}
>      \item Clause \ref{sec:Conformance / Device Conformance}.
>      \item One of clauses \ref{sec:Conformance / Device Conformance / PCI Device Conformance}, \ref{sec:Conformance / Device Conformance / MMIO Device Conformance} or \ref{sec:Conformance / Device Conformance / Channel I/O Device Conformance}.
> -    \item One of clauses \ref{sec:Conformance / Device Conformance / Network Device Conformance}, \ref{sec:Conformance / Device Conformance / Block Device Conformance}, \ref{sec:Conformance / Device Conformance / Console Device Conformance}, \ref{sec:Conformance / Device Conformance / Entropy Device Conformance}, \ref{sec:Conformance / Device Conformance / Traditional Memory Balloon Device Conformance}, \ref{sec:Conformance / Device Conformance / SCSI Host Device Conformance}, \ref{sec:Conformance / Device Conformance / Input Device Conformance}, \ref{sec:Conformance / Device Conformance / Crypto Device Conformance} or \ref{sec:Conformance / Device Conformance / Socket Device Conformance}.
> +    \item One of clauses \ref{sec:Conformance / Device Conformance / Network Device Conformance}, \ref{sec:Conformance / Device Conformance / Block Device Conformance}, \ref{sec:Conformance / Device Conformance / Console Device Conformance}, \ref{sec:Conformance / Device Conformance / Entropy Device Conformance}, \ref{sec:Conformance / Device Conformance / Traditional Memory Balloon Device Conformance}, \ref{sec:Conformance / Device Conformance / SCSI Host Device Conformance}, \ref{sec:Conformance / Device Conformance / Input Device Conformance}, \ref{sec:Conformance / Device Conformance / Crypto Device Conformance}, \ref{sec:Conformance / Device Conformance / Socket Device Conformance} or \ref{sec:Conformance / Device Conformance / RPMB Device Conformance}.
>      \item Clause \ref{sec:Conformance / Legacy Interface: Transitional Device and Transitional Driver Conformance}.
>    \end{itemize}
>  \end{description}
> @@ -183,6 +183,14 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
>  \item \ref{drivernormative:Device Types / Socket Device / Device Operation / Device Events}
>  \end{itemize}
>  
> +\conformance{\subsection}{RPMB Driver Conformance}\label{sec:Conformance / Driver Conformance / RPMB Driver Conformance}
> +
> +A RPMB driver MUST conform to the following normative statements:
> +
> +\begin{itemize}
> +\item \ref{drivernormative:Device Types / RPMB Device / Device Operation}
> +\end{itemize}
> +
>  \conformance{\section}{Device Conformance}\label{sec:Conformance / Device Conformance}
>  
>  A device MUST conform to the following normative statements:
> @@ -338,6 +346,20 @@ \section{Conformance Targets}\label{sec:Conformance / Conformance Targets}
>  \item \ref{devicenormative:Device Types / Socket Device / Device Operation / Receive and Transmit}
>  \end{itemize}
>  
> +\conformance{\subsection}{RPMB Device Conformance}\label{sec:Conformance / Device Conformance / RPMB Device Conformance}
> +
> +An RPMB device MUST conform to the following normative statements:
> +
> +\begin{itemize}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Initialization}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Operation / Device Operation: Program Key}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Operation / Device Operation: Get Write Counter}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Operation / Device Operation: Data Write}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Operation / Device Operation: Data Read}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Operation / Device Operation: Result Read}
> +\item \ref{devicenormative:Device Types / RPMB Device / Device Operation}
> +\end{itemize}
> +
>  \conformance{\section}{Legacy Interface: Transitional Device and Transitional Driver Conformance}\label{sec:Conformance / Legacy Interface: Transitional Device and Transitional Driver Conformance}
>  A conformant implementation MUST be either transitional or
>  non-transitional, see \ref{intro:Legacy
> diff --git a/content.tex b/content.tex
> index ee0d7c9..2573bd5 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -5677,6 +5677,7 @@ \subsubsection{Legacy Interface: Framing Requirements}\label{sec:Device
>  \input{virtio-input.tex}
>  \input{virtio-crypto.tex}
>  \input{virtio-vsock.tex}
> +\input{virtio-rpmb.tex}
>  
>  \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
>  
> diff --git a/introduction.tex b/introduction.tex
> index c96acf9..3453657 100644
> --- a/introduction.tex
> +++ b/introduction.tex
> @@ -60,6 +60,9 @@ \section{Normative References}\label{sec:Normative References}
>  	\phantomsection\label{intro:SCSI MMC}\textbf{[SCSI MMC]} &
>          SCSI Multimedia Commands,
>          \newline\url{http://www.t10.org/cgi-bin/ac.pl?t=f&f=mmc6r00.pdf}\\
> +        \phantomsection\label{intro:eMMC}\textbf{[eMMC]} &
> +        eMMC Electrical Standard (5.1), JESD84-B51,
> +        \newline\url{http://www.jedec.org/sites/default/files/docs/JESD84-B51.pdf}\\
>  
>  \end{longtable}
>  
> diff --git a/virtio-rpmb.tex b/virtio-rpmb.tex
> new file mode 100644
> index 0000000..9aa8c68
> --- /dev/null
> +++ b/virtio-rpmb.tex
> @@ -0,0 +1,289 @@
> +\section{RPMB Device}\label{sec:Device Types / RPMB Device}
> +
> +virtio-rpmb is a virtio based RPMB (Replay Protected Memory Block)
> +device. It is used as a tamper-resistant and anti-replay storage.
> +The device is driven via requests including read, write, get write
> +counter and program key, which are submitted via a request queue.
> +This section relies on definitions from paragraph 6.6.22 of
> +\hyperref[intro:eMMC]{eMMC}.
> +\subsection{Device ID}\label{sec:Device Types / RPMB Device / Device ID}
> +
> +28
> +
> +\subsection{Virtqueues}\label{sec:Device Types / RPMB Device / Virtqueues}
> +
> +\begin{description}
> +\item[0] requestq
> +\end{description}
> +
> +\subsection{Feature bits}\label{sec:Device Types / RPMB Device / Feature bits}
> +
> +None.
> +
> +\subsection{Device configuration layout}\label{sec:Device Types / RPMB Device / Device configuration layout}
> +
> +All fields of this configuration are always available and read-only for the driver.
> +
> +\begin{lstlisting}
> +struct virtio_rpmb_config {
> +        u8 capacity;
> +        u8 max_wr_cnt;
> +        u8 max_rd_cnt;
> +}
> +\end{lstlisting}
> +
> +\begin{description}
> +\item[\field{capacity}] is the capacity of the device (expressed in 128KB units).
> +   The values MUST range between 0x00 and 0x80 inclusive.
> +\item[\field{max_wr_cnt and max_rd_cnt}] are the maximum numbers of RPMB
> +   block count (256B) that can be performed to device in one request. 0 implies
> +   no limitation.
> +\end{description}
> +
> +\devicenormative{\subsection}{Device Initialization}{Device Types / RPMB Device / Device Initialization}
> +
> +\begin{enumerate}
> +\item The virtqueue is initialized.
> +\item The device capacity MUST be initialized to a multiple of 128Kbytes and up to
> +   16Mbytes.
> +\end{enumerate}
> +
> +\subsection{Device Operation}\label{sec:Device Types / RPMB Device / Device Operation}
> +
> +The operation of a virtio RPMB device is driven by the requests placed on the virtqueue.
> +  The type of request can be program key (VIRTIO_RPMB_REQ_PROGRAM_KEY),
> +  get write counter (VIRTIO_RPMB_REQ_GET_WRITE_COUNTER),
> +  write (VIRTIO_RPMB_REQ_DATA_WRITE), and read (VIRTIO_RPMB_REQ_DATA_READ).
> +  A program key or write request can also combine with a
> +  result read (VIRTIO_RPMB_REQ_RESULT_READ) for a returned result.
> +
> +\begin{lstlisting}
> +/* RPMB Request Types */
> +#define VIRTIO_RPMB_REQ_PROGRAM_KEY        0x0001
> +#define VIRTIO_RPMB_REQ_GET_WRITE_COUNTER  0x0002
> +#define VIRTIO_RPMB_REQ_DATA_WRITE         0x0003
> +#define VIRTIO_RPMB_REQ_DATA_READ          0x0004
> +#define VIRTIO_RPMB_REQ_RESULT_READ        0x0005
> +
> +/* RPMB Response Types */
> +#define VIRTIO_RPMB_RESP_PROGRAM_KEY       0x0100
> +#define VIRTIO_RPMB_RESP_GET_COUNTER       0x0200
> +#define VIRTIO_RPMB_RESP_DATA_WRITE        0x0300
> +#define VIRTIO_RPMB_RESP_DATA_READ         0x0400
> +\end{lstlisting}
> +
> +\begin{description}
> +\item[\field{VIRTIO_RPMB_REQ_PROGRAM_KEY}] requests for authentication key programming.
> +  If VIRTIO_RPMB_REQ_RESULT_READ is requested, the device returns the RPMB frame with
> +  the response (VIRTIO_RPMB_RESP_PROGRAM_KEY), the calculated MAC and the result.
> +
> +\item[\field{VIRTIO_RPMB_REQ_GET_WRITE_COUNTER}] requests for reading the write counter.
> +   The device returns the RPMB frame with the response (VIRTIO_RPMB_RESP_GET_COUNTER),
> +   the writer counter, a copy of the nonce received in the request, the calculated
> +   MAC and the result.
> +
> +\item[\field{VIRTIO_RPMB_REQ_DATA_WRITE}] requests for authenticated data write.
> +   If VIRTIO_RPMB_REQ_RESULT_READ is requested, the device returns the RPMB data
> +   frame with the response (VIRTIO_RPMB_RESP_DATA_WRITE), the incremented counter value,
> +   the data address, the calculated MAC and the result.
> +
> +\item[\field{VIRTIO_RPMB_REQ_DATA_READ}] requests for authenticated data read.
> +   The device returns the RPMB frame with the response (VIRTIO_RPMB_RESP_DATA_READ),
> +   the block count, a copy of the nonce received in the request, the address,
> +   the data, the calculated MAC and the result.
> +
> +\item[\field{VIRTIO_RPMB_REQ_RESULT_READ}] requests for a returned result.
> +   It is used following with VIRTIO_RPMB_REQ_PROGRAM_KEY or VIRTIO_RPMB_REQ_DATA_WRITE
> +   request types for a returned result in one or multiple RPMB frames. If it's not
> +   requested, the device will not return result frame to the driver.
> +\end{description}
> +
> +
> +\subsubsection{Device Operation: Request Queue}\label{sec:Device Types / RPMB Device / Device Operation / Device Operation: Request Queue}
> +
> +The request information is delivered in RPMB frame.
> +The frame is in size of 512B.
> +
> +\begin{lstlisting}
> +struct virtio_rpmb_frame {
> +        u8 stuff[196];
> +        u8 key_mac[32];
> +        u8 data[256];
> +        u8 nonce[16];
> +        be32 write_counter;
> +        be16 address;
> +        be16 block_count;
> +        be16 result;
> +        be16 req_resp;
> +};
> +
> +/* RPMB Operation Results */
> +#define VIRTIO_RPMB_RES_OK                     0x0000
> +#define VIRTIO_RPMB_RES_GENERAL_FAILURE        0x0001
> +#define VIRTIO_RPMB_RES_AUTH_FAILURE           0x0002
> +#define VIRTIO_RPMB_RES_COUNT_FAILURE          0x0003
> +#define VIRTIO_RPMB_RES_ADDR_FAILURE           0x0004
> +#define VIRTIO_RPMB_RES_WRITE_FAILURE          0x0005
> +#define VIRTIO_RPMB_RES_READ_FAILURE           0x0006
> +#define VIRTIO_RPMB_RES_NO_AUTH_KEY            0x0007
> +#define VIRTIO_RPMB_RES_WRITE_COUNTER_EXPIRED  0x0080
> +\end{lstlisting}
> +
> +\begin{description}
> +\item[\field{stuff}] Padding for the frame.
> +
> +\item[\field{key_mac}] is the authentication key or the message
> +   authentication code (MAC) depending on the request/response type.
> +   If the request is VIRTIO_RPMB_REQ_PROGRAM_KEY, it's used as an
> +   authentication key. Otherwise, it's used as MAC. The MAC is calculated
> +   using HMAC SHA-256. It takes as input a key and a message. The key
> +   used for the MAC calculation is always the 256-bit RPMB authentication
> +   key. The message used as input to the MAC calculation is the
> +   concatenation of the fields in the RPMB frames excluding stuff bytes
> +   and the MAC itself.
> +
> +\item[\field{data}] is used to be written or read via authenticated
> +   read/write access. It's fixed 256B.
> +
> +\item[\field{nonce}] is a random number generated by the user for the read
> +   or get write counter requests and copied to the response by the device.
> +   It's used for anti-replay protection.
> +
> +\item[\field{writer_counter}] is the counter value for the total amount of
> +   the successful authenticated data write requests.
> +
> +\item[\field{address}] is the address of the data to be written to or read
> +   from the RPMB virtio device. It is the number of the accessed
> +   half sector (256B).
> +
> +\item[\field{block_count}] is the number of blocks (256B) requested to be
> +   read/written. It's limited by \field{max_wr_cnt} or \field{max_rd_cnt}.
> +   For RPMB read request, one virtio buffer including request command and
> +   the subsequent [\field{block_count}] virtio buffers for response data
> +   are placed in the queue.
> +   For RPMB write request, [\field{block_count}] virtio buffers including
> +   request command and data are placed in the queue.
> +
> +\item[\field{result}] includes information about the status of access made
> +   to the device. It is written by the device.
> +
> +\item[\field{req_resp}] is the type of request or response, to/from the device.
> +\end{description}
> +
> +\devicenormative{\paragraph}{Device Operation: Program Key}{Device Types / RPMB Device / Device Operation / Device Operation: Program Key}
> +
> +If VIRTIO_RPMB_REQ_RESULT_READ is requested, the device SHOULD return the
> +RPMB frame with the response, the calculated MAC and the result:
> +
> +\begin{enumerate}
> +\item If the \field{block_count} is not set to 1 then
> +   VIRTIO_RPMB_RES_GENERAL_FAILURE SHOULD be responded as \field{result}.
> +
> +\item If the programming of authentication key fails,
> +   then VIRTIO_RPMB_RES_WRITE_FAILURE SHOULD be responded as \field{result}.
> +
> +\item If some other error occurs then returned result
> +   VIRTIO_RPMB_RES_GENERAL_FAILURE SHOULD be responded as \field{result}.
> +
> +\item The \field{req_resp} value VIRTIO_RPMB_RESP_PROGRAM_KEY SHOULD be responded.
> +\end{enumerate}
> +
> +\devicenormative{\paragraph}{Device Operation: Get Write Counter}{Device Types / RPMB Device / Device Operation / Device Operation: Get Write Counter}
> +
> +If the authentication key is not yet programmed then VIRTIO_RPMB_RES_NO_AUTH_KEY
> +SHOULD be returned in \field{result}.
> +
> +If block count has not been set to 1 then VIRTIO_RPMB_RES_GENERAL_FAILURE
> +SHOULD be responded as \field{result}.
> +
> +The \field{req_resp} value VIRTIO_RPMB_RESP_GET_COUNTER SHOULD be responded.
> +
> +\devicenormative{\paragraph}{Device Operation: Data Write}{Device Types / RPMB Device / Device Operation / Device Operation: Data Write}
> +
> +If VIRTIO_RPMB_REQ_RESULT_READ is requested, the device SHOULD return the RPMB data
> +frame with the response VIRTIO_RPMB_RESP_DATA_WRITE, the incremented counter value,
> +the data address, the calculated MAC and the result:
> +
> +\begin{enumerate}
> +\item If the authentication key is not yet programmed,
> +   then VIRTIO_RPMB_RES_NO_AUTH_KEY SHOULD be returned in \field{result}.
> +
> +\item If block count is zero or greater than \field{max_wr_cnt} then
> +   VIRTIO_RPMB_RES_GENERAL_FAILURE SHOULD be responded.
> +
> +\item The device MUST check whether the write counter has expired.
> +  If the write counter is expired then the \field{result} SHOULD be set to
> +  VIRTIO_RPMB_RES_WRITE_COUNTER_EXPIRED.
> +
> +\item If there is an error in the address (out of range) then the \field{result}
> +  SHOULD be set to VIRTIO_RPMB_RES_ADDR_FAILURE.
> +
> +\item The device MUST calculate the MAC taking authentication key and frame as input,
> +  and compare this with the MAC in the request. If the two MAC’s are different
> +  then VIRTIO_RPMB_RES_AUTH_FAILURE SHOULD be returned in \field{result}.
> +
> +\item If the writer counter in the request is different from the one maintained
> +   by the device then VIRTIO_RPMB_RES_COUNT_FAILURE SHOULD  be returned in \field{result}.
> +
> +\item If the MAC and write counter comparisons are matched then the write request
> +   is considered to be authenticated. The data from the request SHOULD be written to the
> +   address indicated in the request and the write counter SHOULD be incremented by 1.
> +
> +\item If the write fails then the \field{result} SHOULD be VIRTIO_RPMB_RES_WRITE_FAILURE.
> +
> +\item If some other error occurs during the writing procedure then the \field{result}
> +   SHOULD be VIRTIO_RPMB_RES_GENERAL_FAILURE.
> +
> +\item The \field{req_resp} value VIRTIO_RPMB_RESP_DATA_WRITE SHOULD be responded.
> +\end{enumerate}
> +
> +\devicenormative{\paragraph}{Device Operation: Data Read}{Device Types / RPMB Device / Device Operation / Device Operation: Data Read}
> +
> +If the authentication key is not yet programmed then VIRTIO_RPMB_RES_NO_AUTH_KEY
> +SHOULD be returned in \field{result}.
> +
> +If block count has not been set to 1 then VIRTIO_RPMB_RES_GENERAL_FAILURE SHOULD be
> +responded as \field{result}.
> +
> +If there is an error in the address (out of range) then the \field{result} SHOULD
> +be set to VIRTIO_RPMB_RES_ADDR_FAILURE.
> +
> +If data fetch from addressed location inside the device fails then the \field{result}
> +SHOULD be VIRTIO_RPMB_RES_READ_FAILURE.
> +
> +If some other error occurs during the read procedure then the \field{result}
> +SHOULD be VIRTIO_RPMB_RES_GENERAL_FAILURE.
> +
> +The \field{req_resp} value VIRTIO_RPMB_RESP_DATA_READ SHOULD be responded.
> +
> +\devicenormative{\paragraph}{Device Operation: Result Read}{Device Types / RPMB Device / Device Operation / Device Operation: Result Read}
> +
> +If the \field{block_count} has not been set to 1 of VIRTIO_RPMB_REQ_RESULT_READ
> +request then VIRTIO_RPMB_RES_GENERAL_FAILURE SHOULD be responded as \field{result}.
> +
> +\drivernormative{\subsubsection}{Device Operation}{Device Types / RPMB Device / Device Operation}
> +
> +The RPMB frames MUST not be packed by the driver.
> +The driver MUST configure, initialize and format virtqueue for the RPMB requests received from its caller then send it to the device.
> +
> +\devicenormative{\subsubsection}{Device Operation}{Device Types / RPMB Device / Device Operation}
> +
> +The virtio-rpmb device could be backed in a number of ways. It SHOULD
> +   keep consistent behaviors with hardware as described in paragraph
> +   6.6.22 of \hyperref[intro:eMMC]{eMMC}.
> +   Some elements are maintained by the device:
> +\begin{enumerate}
> +\item The device MUST maintain a one-time programmable authentication key.
> +   It cannot be overwritten, erased or read. The key is used to
> +   authenticate the accesses when MAC is calculated. This key MUST be
> +   kept regardless of device reset or reboot.
> +\item The device MUST maintain a read-only monotonic write counter. It
> +  MUST be initialized to zero and added by one automatically along with
> +   successful write operation. The value cannot be reset. After
> +   the counter has reached its maximum value 0xFFFF FFFF, it will
> +   not be incremented anymore. This counter MUST be kept regardless
> +   of device reset or reboot.
> +\item The device MUST maintain the data for read/write via authenticated
> +   access.
> +\end{enumerate}
> +
> -- 
> 2.7.4
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org