[virtio-dev] Fwd: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[virtio-dev] Fwd: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Enrico Granata]

Sending as a forward because my mailer has issues with virtio-dev@

---------- Forwarded message ---------
From: Enrico Granata <egranata@google.com>
Date: Tue, Apr 20, 2021 at 10:25 AM
Subject: [PATCH] Provide detailed specification of virtio-blk lifetime metrics
To: <virtio-dev@lists.oasis-open.org>
Cc: <egranata@google.com>, <hch@infradead.org>, <mst@redhat.com>,
<linux-block@vger.kernel.org>,
<virtualization@lists.linux-foundation.org>


In the course of review, some concerns were surfaced about the
original virtio-blk lifetime proposal, as it depends on the eMMC
spec which is not open

Add a more detailed description of the meaning of the fields
added by that proposal to the virtio-blk specification, as to
make it feasible to understand and implement the new lifetime
metrics feature without needing to refer to JEDEC's specification

This patch does not change the meaning of those fields nor add
any new fields, but it is intended to provide an open and more
clear description of the meaning associated with those fields.

Signed-off-by: Enrico Granata <egranata@google.com>
---
 content.tex | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/content.tex b/content.tex
index 9232d5c..7e14ccc 100644
--- a/content.tex
+++ b/content.tex
@@ -4669,13 +4669,32 @@ \subsection{Device Operation}\label{sec:Device
Types / Block Device / Device Ope
 \end{lstlisting}

 The device lifetime metrics \field{pre_eol_info}, \field{device_lifetime_est_a}
-and \field{device_lifetime_est_b} have the semantics described by the
JESD84-B50
-specification for the extended CSD register fields \field{PRE_EOL_INFO}
-\field{DEVICE_LIFETIME_EST_TYP_A} and \field{DEVICE_LIFETIME_EST_TYP_B}
-respectively.
+and \field{device_lifetime_est_b} are discussed in the JESD84-B50
specification.

-JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
-pursuant to JEDEC's licensing terms and conditions.
+The complete JESD84-B50 is available at the JEDEC website
(https://www.jedec.org)
+pursuant to JEDEC's licensing terms and conditions. For the purposes of this
+specification, these fields are defined as follows.
+
+The \field{pre_eol_info} will have one of these values:
+
+\begin{lstlisting}
+// Value not available
+#define PRE_EOL_INFO_UNDEFINED    0
+// < 80% of blocks are consumed
+#define PRE_EOL_INFO_NORMAL       1
+// 80% of blocks are consumed
+#define PRE_EOL_INFO_WARNING      2
+// 90% of blocks are consumed
+#define PRE_EOL_INFO_URGENT       3
+// All others values are reserved
+\end{lstlisting}
+
+The \field{device_lifetime_est_typ_a} refers to wear of SLC cells and
is provided in
+increments of 10%, with 0 meaning undefined, 1 meaning up-to 10% of
lifetime used, and so on,
+thru to 11 meaning estimated lifetime exceeded. All values above 11
are reserved.
+
+The \field{device_lifetime_est_typ_b} refers to wear of MLC cells and
is provided with
+the same semantics as \field{device_lifetime_est_typ_a}.

 The final \field{status} byte is written by the device: either
 VIRTIO_BLK_S_OK for success, VIRTIO_BLK_S_IOERR for device or driver
@@ -4812,7 +4831,8 @@ \subsection{Device Operation}\label{sec:Device
Types / Block Device / Device Ope
 or UFS persistent storage), the device SHOULD offer the VIRTIO_BLK_F_LIFETIME
 flag. The flag MUST NOT be offered if the device is backed by storage for which
 the lifetime metrics described in this document cannot be obtained or for which
-such metrics have no useful meaning.
+such metrics have no useful meaning. If the metrics are offered, the
device MUST NOT
+send any reserved values, as defined in this specification.

 \subsubsection{Legacy Interface: Device Operation}\label{sec:Device
Types / Block Device / Device Operation / Legacy Interface: Device
Operation}
 When using the legacy interface, transitional devices and drivers
--
2.31.1.368.gbe11c130af-goog

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Michael S. Tsirkin]

On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> In the course of review, some concerns were surfaced about the
> original virtio-blk lifetime proposal, as it depends on the eMMC
> spec which is not open
> 
> Add a more detailed description of the meaning of the fields
> added by that proposal to the virtio-blk specification, as to
> make it feasible to understand and implement the new lifetime
> metrics feature without needing to refer to JEDEC's specification
> 
> This patch does not change the meaning of those fields nor add
> any new fields, but it is intended to provide an open and more
> clear description of the meaning associated with those fields.
> 
> Signed-off-by: Enrico Granata <egranata@google.com>

Enrico it's great that you are reaching out to the
wider storage community before making spec changes.

Christoph could you please comment on whether this addresses
your concerns with the lifetime feature.
You wrote "it really needs to stand a lone and be properly documented"
and this seems to be the direction this patch is going in.


> ---
>  content.tex | 34 +++++++++++++++++++++++++++-------
>  1 file changed, 27 insertions(+), 7 deletions(-)
> 
> diff --git a/content.tex b/content.tex
> index 9232d5c..7e14ccc 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -4669,13 +4669,32 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
>  \end{lstlisting}
>  
>  The device lifetime metrics \field{pre_eol_info}, \field{device_lifetime_est_a}
> -and \field{device_lifetime_est_b} have the semantics described by the JESD84-B50
> -specification for the extended CSD register fields \field{PRE_EOL_INFO}
> -\field{DEVICE_LIFETIME_EST_TYP_A} and \field{DEVICE_LIFETIME_EST_TYP_B}
> -respectively.
> +and \field{device_lifetime_est_b} are discussed in the JESD84-B50 specification.
>  
> -JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> -pursuant to JEDEC's licensing terms and conditions.
> +The complete JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> +pursuant to JEDEC's licensing terms and conditions.

These links really belong in either normative or non-normative
references section.

> For the purposes of this
> +specification, these fields are defined as follows.

All this seems kind of vague. What does one need that spec for?
Is it just a note for pass-through developers?

How about "to simplify pass-through
from eMMC devices the format of fields 
  pre_eol_info, device_lifetime_est_typ_a and device_lifetime_est_typ_b
matches PRE_EOL_INFO, DEVICE_LIFETIME_EST_TYP_A and DEVICE_LIFETIME_EST_TYP_B
in the 
\hyperref[intro:PCI]{[PCI]}.



Also, now that I mention it, what about NVMe pass-through? Arguably
nvme is getting more popular. Will we be able to support that use-case
as well? Or is more data needed? What is the plan there?

> +
> +The \field{pre_eol_info} will have one of these values:
> +
> +\begin{lstlisting}
> +// Value not available
> +#define PRE_EOL_INFO_UNDEFINED    0
> +// < 80% of blocks are consumed
> +#define PRE_EOL_INFO_NORMAL       1
> +// 80% of blocks are consumed
> +#define PRE_EOL_INFO_WARNING      2
> +// 90% of blocks are consumed
> +#define PRE_EOL_INFO_URGENT       3
> +// All others values are reserved


Block comments /* */ should be used as these are documented
in the introduction.

> +\end{lstlisting}
> +
> +The \field{device_lifetime_est_typ_a} refers to wear of SLC cells and is provided in
> +increments of 10%, with 0 meaning undefined, 1 meaning up-to 10% of lifetime used, and so on,
> +thru to 11 meaning estimated lifetime exceeded. All values above 11 are reserved.
> +
> +The \field{device_lifetime_est_typ_b} refers to wear of MLC cells and is provided with
> +the same semantics as \field{device_lifetime_est_typ_a}.
>  
>  The final \field{status} byte is written by the device: either
>  VIRTIO_BLK_S_OK for success, VIRTIO_BLK_S_IOERR for device or driver
> @@ -4812,7 +4831,8 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
>  or UFS persistent storage), the device SHOULD offer the VIRTIO_BLK_F_LIFETIME
>  flag. The flag MUST NOT be offered if the device is backed by storage for which
>  the lifetime metrics described in this document cannot be obtained or for which
> -such metrics have no useful meaning.
> +such metrics have no useful meaning. If the metrics are offered, the device MUST NOT
> +send any reserved values, as defined in this specification.
>  
>  \subsubsection{Legacy Interface: Device Operation}\label{sec:Device Types / Block Device / Device Operation / Legacy Interface: Device Operation}
>  When using the legacy interface, transitional devices and drivers
> -- 
> 2.31.1.368.gbe11c130af-goog
> 


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Michael S. Tsirkin]

On Sun, May 02, 2021 at 05:12:14AM -0400, Michael S. Tsirkin wrote:
> On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> > In the course of review, some concerns were surfaced about the
> > original virtio-blk lifetime proposal, as it depends on the eMMC
> > spec which is not open
> > 
> > Add a more detailed description of the meaning of the fields
> > added by that proposal to the virtio-blk specification, as to
> > make it feasible to understand and implement the new lifetime
> > metrics feature without needing to refer to JEDEC's specification
> > 
> > This patch does not change the meaning of those fields nor add
> > any new fields, but it is intended to provide an open and more
> > clear description of the meaning associated with those fields.
> > 
> > Signed-off-by: Enrico Granata <egranata@google.com>
> 
> Enrico it's great that you are reaching out to the
> wider storage community before making spec changes.
> 
> Christoph could you please comment on whether this addresses
> your concerns with the lifetime feature.
> You wrote "it really needs to stand a lone and be properly documented"
> and this seems to be the direction this patch is going in.
> 
> 
> > ---
> >  content.tex | 34 +++++++++++++++++++++++++++-------
> >  1 file changed, 27 insertions(+), 7 deletions(-)
> > 
> > diff --git a/content.tex b/content.tex
> > index 9232d5c..7e14ccc 100644
> > --- a/content.tex
> > +++ b/content.tex
> > @@ -4669,13 +4669,32 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> >  \end{lstlisting}
> >  
> >  The device lifetime metrics \field{pre_eol_info}, \field{device_lifetime_est_a}
> > -and \field{device_lifetime_est_b} have the semantics described by the JESD84-B50
> > -specification for the extended CSD register fields \field{PRE_EOL_INFO}
> > -\field{DEVICE_LIFETIME_EST_TYP_A} and \field{DEVICE_LIFETIME_EST_TYP_B}
> > -respectively.
> > +and \field{device_lifetime_est_b} are discussed in the JESD84-B50 specification.
> >  
> > -JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> > -pursuant to JEDEC's licensing terms and conditions.
> > +The complete JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> > +pursuant to JEDEC's licensing terms and conditions.
> 
> These links really belong in either normative or non-normative
> references section.
> 
> > For the purposes of this
> > +specification, these fields are defined as follows.
> 
> All this seems kind of vague. What does one need that spec for?
> Is it just a note for pass-through developers?
> 
> How about "to simplify pass-through
> from eMMC devices the format of fields 
>   pre_eol_info, device_lifetime_est_typ_a and device_lifetime_est_typ_b
> matches PRE_EOL_INFO, DEVICE_LIFETIME_EST_TYP_A and DEVICE_LIFETIME_EST_TYP_B
> in the 
> \hyperref[intro:PCI]{[PCI]}.
> 
> 
> 
> Also, now that I mention it, what about NVMe pass-through? Arguably
> nvme is getting more popular. Will we be able to support that use-case
> as well? Or is more data needed? What is the plan there?
> 
> > +
> > +The \field{pre_eol_info} will have one of these values:

Besides specifying the values what does it mean exactly?
E.g. what are blocks?

E.g. "pre_eol_info specifies the percentage of blocks consumed
on the device" and explain what blocks are here.

> > +
> > +\begin{lstlisting}
> > +// Value not available
> > +#define PRE_EOL_INFO_UNDEFINED    0
> > +// < 80% of blocks are consumed
> > +#define PRE_EOL_INFO_NORMAL       1
> > +// 80% of blocks are consumed
> > +#define PRE_EOL_INFO_WARNING      2
> > +// 90% of blocks are consumed
> > +#define PRE_EOL_INFO_URGENT       3
> > +// All others values are reserved


Also please prefix with VIRTIO_BLK_ for consistency.

> 
> 
> Block comments /* */ should be used as these are documented
> in the introduction.
> 
> > +\end{lstlisting}
> > +
> > +The \field{device_lifetime_est_typ_a} refers to wear of SLC cells and is provided in
> > +increments of 10%, with 0 meaning undefined, 1 meaning up-to 10% of lifetime used, and so on,
> > +thru to 11 meaning estimated lifetime exceeded. All values above 11 are reserved.
> > +
> > +The \field{device_lifetime_est_typ_b} refers to wear of MLC cells and is provided with
> > +the same semantics as \field{device_lifetime_est_typ_a}.
> >  
> >  The final \field{status} byte is written by the device: either
> >  VIRTIO_BLK_S_OK for success, VIRTIO_BLK_S_IOERR for device or driver
> > @@ -4812,7 +4831,8 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> >  or UFS persistent storage), the device SHOULD offer the VIRTIO_BLK_F_LIFETIME
> >  flag. The flag MUST NOT be offered if the device is backed by storage for which
> >  the lifetime metrics described in this document cannot be obtained or for which
> > -such metrics have no useful meaning.
> > +such metrics have no useful meaning. If the metrics are offered, the device MUST NOT
> > +send any reserved values, as defined in this specification.
> >  
> >  \subsubsection{Legacy Interface: Device Operation}\label{sec:Device Types / Block Device / Device Operation / Legacy Interface: Device Operation}
> >  When using the legacy interface, transitional devices and drivers
> > -- 
> > 2.31.1.368.gbe11c130af-goog
> > 


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Enrico Granata]

Thanks everyone for the feedback thus far; I just sent out a v2 patch
based on everyone's comments
I am happy to see the discussion moving forward here and I look
forward to your continued input

On Wed, May 5, 2021 at 4:34 AM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Sun, May 02, 2021 at 05:12:14AM -0400, Michael S. Tsirkin wrote:
> > On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> > > In the course of review, some concerns were surfaced about the
> > > original virtio-blk lifetime proposal, as it depends on the eMMC
> > > spec which is not open
> > >
> > > Add a more detailed description of the meaning of the fields
> > > added by that proposal to the virtio-blk specification, as to
> > > make it feasible to understand and implement the new lifetime
> > > metrics feature without needing to refer to JEDEC's specification
> > >
> > > This patch does not change the meaning of those fields nor add
> > > any new fields, but it is intended to provide an open and more
> > > clear description of the meaning associated with those fields.
> > >
> > > Signed-off-by: Enrico Granata <egranata@google.com>
> >
> > Enrico it's great that you are reaching out to the
> > wider storage community before making spec changes.
> >
> > Christoph could you please comment on whether this addresses
> > your concerns with the lifetime feature.
> > You wrote "it really needs to stand a lone and be properly documented"
> > and this seems to be the direction this patch is going in.
> >
> >
> > > ---
> > >  content.tex | 34 +++++++++++++++++++++++++++-------
> > >  1 file changed, 27 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/content.tex b/content.tex
> > > index 9232d5c..7e14ccc 100644
> > > --- a/content.tex
> > > +++ b/content.tex
> > > @@ -4669,13 +4669,32 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> > >  \end{lstlisting}
> > >
> > >  The device lifetime metrics \field{pre_eol_info}, \field{device_lifetime_est_a}
> > > -and \field{device_lifetime_est_b} have the semantics described by the JESD84-B50
> > > -specification for the extended CSD register fields \field{PRE_EOL_INFO}
> > > -\field{DEVICE_LIFETIME_EST_TYP_A} and \field{DEVICE_LIFETIME_EST_TYP_B}
> > > -respectively.
> > > +and \field{device_lifetime_est_b} are discussed in the JESD84-B50 specification.
> > >
> > > -JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> > > -pursuant to JEDEC's licensing terms and conditions.
> > > +The complete JESD84-B50 is available at the JEDEC website (https://www.jedec.org)
> > > +pursuant to JEDEC's licensing terms and conditions.
> >
> > These links really belong in either normative or non-normative
> > references section.
> >
> > > For the purposes of this
> > > +specification, these fields are defined as follows.
> >
> > All this seems kind of vague. What does one need that spec for?
> > Is it just a note for pass-through developers?
> >

Moved these comments and clarified intent in patch v2

> > How about "to simplify pass-through
> > from eMMC devices the format of fields
> >   pre_eol_info, device_lifetime_est_typ_a and device_lifetime_est_typ_b
> > matches PRE_EOL_INFO, DEVICE_LIFETIME_EST_TYP_A and DEVICE_LIFETIME_EST_TYP_B
> > in the
> > \hyperref[intro:PCI]{[PCI]}.
> >
> >
> >
> > Also, now that I mention it, what about NVMe pass-through? Arguably
> > nvme is getting more popular. Will we be able to support that use-case
> > as well? Or is more data needed? What is the plan there?
> >

Given my use case and expertise I have not looked into NMVe at the moment.
I see a possible option, i.e. rename the F_LIFETIME flag to
F_EMMC_LIFETIME, and leave everything else as-is
When someone (myself or others) wants to add NMVe support, add a F_NMVE_LIFETIME
Then T_LIFETIME could return either the existing eMMC data structures,
or the new NMVe data structures depending on which
feature flag is exposed.
The only issue here would be that you could not support both at the
same time, but I am personally not convinced that this would be a
major issue, as I imagine most implementations would be passthroughs
of what the underlying host hardware is offering, and so you
would provide NMVe info on NMVe hardware and eMMC info on eMMC hardware.
What do you think?

> > > +
> > > +The \field{pre_eol_info} will have one of these values:
>
> Besides specifying the values what does it mean exactly?
> E.g. what are blocks?
>
> E.g. "pre_eol_info specifies the percentage of blocks consumed
> on the device" and explain what blocks are here.
>

Specified in v2 patch

> > > +
> > > +\begin{lstlisting}
> > > +// Value not available
> > > +#define PRE_EOL_INFO_UNDEFINED    0
> > > +// < 80% of blocks are consumed
> > > +#define PRE_EOL_INFO_NORMAL       1
> > > +// 80% of blocks are consumed
> > > +#define PRE_EOL_INFO_WARNING      2
> > > +// 90% of blocks are consumed
> > > +#define PRE_EOL_INFO_URGENT       3
> > > +// All others values are reserved
>
>
> Also please prefix with VIRTIO_BLK_ for consistency.
>
> >
> >
> > Block comments /* */ should be used as these are documented
> > in the introduction.
> >

Both addressed in v2 patch

> > > +\end{lstlisting}
> > > +
> > > +The \field{device_lifetime_est_typ_a} refers to wear of SLC cells and is provided in
> > > +increments of 10%, with 0 meaning undefined, 1 meaning up-to 10% of lifetime used, and so on,
> > > +thru to 11 meaning estimated lifetime exceeded. All values above 11 are reserved.
> > > +
> > > +The \field{device_lifetime_est_typ_b} refers to wear of MLC cells and is provided with
> > > +the same semantics as \field{device_lifetime_est_typ_a}.
> > >
> > >  The final \field{status} byte is written by the device: either
> > >  VIRTIO_BLK_S_OK for success, VIRTIO_BLK_S_IOERR for device or driver
> > > @@ -4812,7 +4831,8 @@ \subsection{Device Operation}\label{sec:Device Types / Block Device / Device Ope
> > >  or UFS persistent storage), the device SHOULD offer the VIRTIO_BLK_F_LIFETIME
> > >  flag. The flag MUST NOT be offered if the device is backed by storage for which
> > >  the lifetime metrics described in this document cannot be obtained or for which
> > > -such metrics have no useful meaning.
> > > +such metrics have no useful meaning. If the metrics are offered, the device MUST NOT
> > > +send any reserved values, as defined in this specification.
> > >
> > >  \subsubsection{Legacy Interface: Device Operation}\label{sec:Device Types / Block Device / Device Operation / Legacy Interface: Device Operation}
> > >  When using the legacy interface, transitional devices and drivers
> > > --
> > > 2.31.1.368.gbe11c130af-goog
> > >
>

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Christoph Hellwig]

On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> In the course of review, some concerns were surfaced about the
> original virtio-blk lifetime proposal, as it depends on the eMMC
> spec which is not open
> 
> Add a more detailed description of the meaning of the fields
> added by that proposal to the virtio-blk specification, as to
> make it feasible to understand and implement the new lifetime
> metrics feature without needing to refer to JEDEC's specification
> 
> This patch does not change the meaning of those fields nor add
> any new fields, but it is intended to provide an open and more
> clear description of the meaning associated with those fields.
> 
> Signed-off-by: Enrico Granata <egranata@google.com>

Still not a fan of the encoding, but at least it is properly documented
now:

Acked-by: Christoph Hellwig <hch@lst.de>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Michael S. Tsirkin]

On Wed, May 05, 2021 at 06:43:14AM +0100, Christoph Hellwig wrote:
> On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> > In the course of review, some concerns were surfaced about the
> > original virtio-blk lifetime proposal, as it depends on the eMMC
> > spec which is not open
> > 
> > Add a more detailed description of the meaning of the fields
> > added by that proposal to the virtio-blk specification, as to
> > make it feasible to understand and implement the new lifetime
> > metrics feature without needing to refer to JEDEC's specification
> > 
> > This patch does not change the meaning of those fields nor add
> > any new fields, but it is intended to provide an open and more
> > clear description of the meaning associated with those fields.
> > 
> > Signed-off-by: Enrico Granata <egranata@google.com>
> 
> Still not a fan of the encoding, but at least it is properly documented
> now:
> 
> Acked-by: Christoph Hellwig <hch@lst.de>

With that, would you like to ack the virtip-blk patch too?
The format didn't actually change ...

-- 
MST


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

Re: [virtio-dev] Re: [PATCH] Provide detailed specification of virtio-blk lifetime metrics

[Enrico Granata]

FWIW, that patch needs a few updates, so I will be sending out an
updated version (ETA within next week is the plan), but I do agree
that Ack: would be good since there were some strong philosophical
objections in the beginning & it might make sense to let the wider
community know those are being addressed

Thanks,
- Enrico

On Wed, May 5, 2021 at 2:11 PM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Wed, May 05, 2021 at 06:43:14AM +0100, Christoph Hellwig wrote:
> > On Tue, Apr 20, 2021 at 04:25:56PM +0000, Enrico Granata wrote:
> > > In the course of review, some concerns were surfaced about the
> > > original virtio-blk lifetime proposal, as it depends on the eMMC
> > > spec which is not open
> > >
> > > Add a more detailed description of the meaning of the fields
> > > added by that proposal to the virtio-blk specification, as to
> > > make it feasible to understand and implement the new lifetime
> > > metrics feature without needing to refer to JEDEC's specification
> > >
> > > This patch does not change the meaning of those fields nor add
> > > any new fields, but it is intended to provide an open and more
> > > clear description of the meaning associated with those fields.
> > >
> > > Signed-off-by: Enrico Granata <egranata@google.com>
> >
> > Still not a fan of the encoding, but at least it is properly documented
> > now:
> >
> > Acked-by: Christoph Hellwig <hch@lst.de>
>
> With that, would you like to ack the virtip-blk patch too?
> The format didn't actually change ...
>
> --
> MST
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
>

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org