[virtio-dev] [PATCH v2 3/7] transport-mmio: Refer to the vq by its number

[Parav Pandit <parav@nvidia.com>]

Currently specification uses virtqueue index and
number interchangeably to refer to the virtqueue.

Instead refer to it by its number.

Fixes: https://github.com/oasis-tcs/virtio-spec/issues/163
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
---
 transport-mmio.tex | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/transport-mmio.tex b/transport-mmio.tex
index 3047633..f9b3a34 100644
--- a/transport-mmio.tex
+++ b/transport-mmio.tex
@@ -108,7 +108,7 @@ \subsection{MMIO Device Register Layout}\label{sec:Virtio Transport Options / Vi
     bits accessible by writing to \field{DriverFeatures}.
   }
   \hline
-  \mmioreg{QueueSel}{Virtual queue index}{0x030}{W}{%
+  \mmioreg{QueueSel}{Virtual queue number}{0x030}{W}{%
     Writing to this register selects the virtual queue that the
     following operations on \field{QueueSizeMax},
     \field{QueueSize}, \field{QueueReady},
@@ -149,7 +149,7 @@ \subsection{MMIO Device Register Layout}\label{sec:Virtio Transport Options / Vi
     there are new buffers to process in a queue.
 
     When VIRTIO_F_NOTIFICATION_DATA has not been negotiated,
-    the value written is the queue index.
+    the value written is the queue number.
 
     When VIRTIO_F_NOTIFICATION_DATA has been negotiated,
     the \field{Notification data} value has the following format:
@@ -363,8 +363,7 @@ \subsubsection{Virtqueue Configuration}\label{sec:Virtio Transport Options / Vir
 The driver will typically initialize the virtual queue in the following way:
 
 \begin{enumerate}
-\item Select the queue writing its index (first queue is 0) to
-   \field{QueueSel}.
+\item Select the queue writing its number to \field{QueueSel}.
 
 \item Check if the queue is not already in use: read \field{QueueReady},
    and expect a returned value of zero (0x0).
@@ -392,7 +391,7 @@ \subsubsection{Available Buffer Notifications}\label{sec:Virtio Transport Option
 
 When VIRTIO_F_NOTIFICATION_DATA has not been negotiated,
 the driver sends an available buffer notification to the device by writing
-the 16-bit virtqueue index
+the 16-bit virtqueue number
 of the queue to be notified to \field{QueueNotify}.
 
 When VIRTIO_F_NOTIFICATION_DATA has been negotiated,
@@ -470,7 +469,7 @@ \subsection{Legacy interface}\label{sec:Virtio Transport Options / Virtio Over M
     (see QueuePFN).
   }
   \hline
-  \mmioreg{QueueSel}{Virtual queue index}{0x030}{W}{%
+  \mmioreg{QueueSel}{Virtual queue number}{0x030}{W}{%
     Writing to this register selects the virtual queue that the
     following operations on the \field{QueueSizeMax},
     \field{QueueSize}, \field{QueueAlign}
@@ -550,8 +549,7 @@ \subsection{Legacy interface}\label{sec:Virtio Transport Options / Virtio Over M
 
 The virtual queue is configured as follows:
 \begin{enumerate}
-\item Select the queue writing its index (first queue is 0) to
-   \field{QueueSel}.
+\item Select the queue writing its number to \field{QueueSel}.
 
 \item Check if the queue is not already in use: read \field{QueuePFN},
    expecting a returned value of zero (0x0).
-- 
2.26.2


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org