[virtio-dev] [PATCH v16 06/11] transport-mmio: Avoid referring to zero based index

[Parav Pandit <parav@nvidia.com>]

VQ range is already described in the first patch in basic virtqueue
section. Hence remove the duplicate reference to it.

Fixes: https://github.com/oasis-tcs/virtio-spec/issues/163
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>

---
changelog:
v12->v13:
- corrected number to index
v11->v12:
- remove changes related to 'vq number'
v8->v9:
- added 'by' at two places
- replaced 'queue number' with 'vq number'

v6->v7:
- remove text around first vq as it is already covered in the basic
  virtqueues facility section
---
 transport-mmio.tex | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/transport-mmio.tex b/transport-mmio.tex
index 164e640..2d24b4c 100644
--- a/transport-mmio.tex
+++ b/transport-mmio.tex
@@ -113,8 +113,7 @@ \subsection{MMIO Device Register Layout}\label{sec:Virtio Transport Options / Vi
     following operations on \field{QueueSizeMax},
     \field{QueueSize}, \field{QueueReady},
     \field{QueueDescLow}, \field{QueueDescHigh}, \field{QueueDriverlLow}, \field{QueueDriverHigh},
-    \field{QueueDeviceLow}, \field{QueueDeviceHigh} and \field{QueueReset} apply to. The index
-    number of the first queue is zero (0x0).
+    \field{QueueDeviceLow}, \field{QueueDeviceHigh} and \field{QueueReset} apply to.
   }
   \hline
   \mmioreg{QueueSizeMax}{Maximum virtual queue size}{0x034}{R}{%
@@ -363,8 +362,7 @@ \subsubsection{Virtqueue Configuration}\label{sec:Virtio Transport Options / Vir
 The driver will typically initialize the virtual queue in the following way:
 
 \begin{enumerate}
-\item Select the queue writing its index (first queue is 0) to
-   \field{QueueSel}.
+\item Select the queue by writing its index to \field{QueueSel}.
 
 \item Check if the queue is not already in use: read \field{QueueReady},
    and expect a returned value of zero (0x0).
@@ -474,9 +472,7 @@ \subsection{Legacy interface}\label{sec:Virtio Transport Options / Virtio Over M
     Writing to this register selects the virtual queue that the
     following operations on the \field{QueueSizeMax},
     \field{QueueSize}, \field{QueueAlign}
-    and \field{QueuePFN} registers apply to. The index
-    number of the first queue is zero (0x0).
-.
+    and \field{QueuePFN} registers apply to.
   }
   \hline
   \mmioreg{QueueSizeMax}{Maximum virtual queue size}{0x034}{R}{%
@@ -550,8 +546,7 @@ \subsection{Legacy interface}\label{sec:Virtio Transport Options / Virtio Over M
 
 The virtual queue is configured as follows:
 \begin{enumerate}
-\item Select the queue writing its index (first queue is 0) to
-   \field{QueueSel}.
+\item Select the queue by writing its index to \field{QueueSel}.
 
 \item Check if the queue is not already in use: read \field{QueuePFN},
    expecting a returned value of zero (0x0).
-- 
2.26.2


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org