From: "Michael S. Tsirkin" <mst@redhat.com>
To: Parav Pandit <parav@nvidia.com>
Cc: Cornelia Huck <cohuck@redhat.com>,
"virtio-comment@lists.oasis-open.org"
<virtio-comment@lists.oasis-open.org>,
"david.edmondson@oracle.com" <david.edmondson@oracle.com>,
"virtio-dev@lists.oasis-open.org"
<virtio-dev@lists.oasis-open.org>,
"sburla@marvell.com" <sburla@marvell.com>,
"jasowang@redhat.com" <jasowang@redhat.com>,
Yishai Hadas <yishaih@nvidia.com>,
Maor Gottlieb <maorg@nvidia.com>,
Shahaf Shuler <shahafs@nvidia.com>
Subject: [virtio-dev] Re: [PATCH v9 3/4] admin: Add group member legacy register access commands
Date: Thu, 6 Jul 2023 01:43:57 -0400 [thread overview]
Message-ID: <20230706013753-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <PH0PR12MB54816B8F00A8D403B9035B7BDC2FA@PH0PR12MB5481.namprd12.prod.outlook.com>
On Wed, Jul 05, 2023 at 04:34:02PM +0000, Parav Pandit wrote:
>
>
> > From: Cornelia Huck <cohuck@redhat.com>
> > Sent: Wednesday, July 5, 2023 6:24 AM
> > > +
> > > +In some systems, there is a need to support utilizing the legacy
> > > +driver with the device that do not directly support the legacy
> > > +interface. In such scenarios,
> >
> > Maybe better:
> >
> > "In some systems, there is a need to support utilizing legacy drivers with devices
> > that do not directly support the legacy interface."
> >
> > ?
> >
> Can you please explain how plural is better if it is?
> I see this a lot intermixed in the spec.
> Why cannot we describe things using single object "the driver" and "the device"?
> I prefer to describe things without plurality as done in many parts of the spec.
> Please let me know.
It's ok too, but it must be consistent: "do" goes with plural. For
singular - "does". Also this is the 1st time we mention this driver and
this device, so should be "a":
In some systems, there is a need to support utilizing a legacy driver with
a device that does not directly support the legacy interface.
> > > +a group owner device can provide the legacy interface functionality
> > > +for the group member devices. The driver of an owner device can then
> > > +access the legacy interface of a member device on behalf of the legacy
> > member device driver.
> >
> > (...)
> >
> > > +\paragraph{Legacy Driver Notification Query}\label{par:Basic
> > > +Facilities of a Virtio Device / Device groups / Group administration
> > > +commands / Legacy Interface / Legacy Driver Notifications Query}
> > > +
> > > +Even though the driver notifications can be communicated through the
> > > +administration command, if the group owner device or group member
> > > +device supports such notifications using a memory-mapped operation or
> > > +I/O operation, they are sent to the device by accessing such a
> > > +notification region using a memory or an I/O operation.
> >
> > I find this sentence confusing, probably because it is too complex... what about
> >
> > "If the group owner device or the group member device support driver
> > notifications via a memory-mapped operation or I/O operation, these
> > notifications are sent to the device via accessing such a notification region using
> > a memory or I/O operation {in addition to|instead of} communicating the
> > notifications through the admistration command."
> >
> With instead of, it reads simpler. Will change it.
>
> > (I'm not sure whether it is either or both.)
> >
> > > +
> > > +A group owner device optionally support querying driver notifications
> > > +region
> >
> > "can optionally support" ?
> >
> Ack.
>
> > > +using VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY command.
> > > +
> > > +The driver sets command \field{opcode} to
> > VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_QUERY.
> > > +This command does not use \field{command_specific_data}.
> > > +
> > > +When command completes successfully, \field{command_specific_result}
> >
> > "the command"
> >
> Ack
>
> > > +uses following structure:
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
next prev parent reply other threads:[~2023-07-06 5:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-04 23:37 [virtio-dev] [PATCH v9 0/4] admin: Access legacy registers using admin commands Parav Pandit
2023-07-04 23:37 ` [virtio-dev] [PATCH v9 1/4] admin: Split opcode table rows with a line Parav Pandit
2023-07-05 10:05 ` [virtio-dev] " Cornelia Huck
2023-07-04 23:37 ` [virtio-dev] [PATCH v9 2/4] admin: Fix section numbering Parav Pandit
2023-07-05 10:09 ` [virtio-dev] " Cornelia Huck
2023-07-05 16:29 ` Parav Pandit
2023-07-04 23:37 ` [virtio-dev] [PATCH v9 3/4] admin: Add group member legacy register access commands Parav Pandit
2023-07-05 10:24 ` [virtio-dev] " Cornelia Huck
2023-07-05 16:34 ` [virtio-dev] " Parav Pandit
2023-07-06 5:43 ` Michael S. Tsirkin [this message]
2023-07-05 11:04 ` [virtio-dev] Re: [virtio-comment] " Michael S. Tsirkin
2023-07-05 18:26 ` [virtio-dev] " Parav Pandit
2023-07-06 6:01 ` [virtio-dev] " Michael S. Tsirkin
2023-07-05 22:01 ` [virtio-dev] " Parav Pandit
2023-07-04 23:37 ` [virtio-dev] [PATCH v9 4/4] transport-pci: Introduce group legacy group member config region access Parav Pandit
2023-07-05 10:29 ` [virtio-dev] " Cornelia Huck
2023-07-05 16:36 ` [virtio-dev] " Parav Pandit
2023-07-05 10:56 ` [virtio-dev] Re: [virtio-comment] " Michael S. Tsirkin
2023-07-05 11:09 ` [virtio-dev] Re: [virtio-comment] [PATCH v9 0/4] admin: Access legacy registers using admin commands Michael S. Tsirkin
2023-07-05 13:01 ` [virtio-dev] " Parav Pandit
2023-07-05 13:42 ` Cornelia Huck
2023-07-05 14:37 ` Parav Pandit
2023-07-06 4:20 ` Parav Pandit
2023-07-06 6:10 ` [virtio-dev] " Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230706013753-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=cohuck@redhat.com \
--cc=david.edmondson@oracle.com \
--cc=jasowang@redhat.com \
--cc=maorg@nvidia.com \
--cc=parav@nvidia.com \
--cc=sburla@marvell.com \
--cc=shahafs@nvidia.com \
--cc=virtio-comment@lists.oasis-open.org \
--cc=virtio-dev@lists.oasis-open.org \
--cc=yishaih@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox