From: Harald Mommer <hmo@opensynergy.com>
To: Vincent Mailhol <vincent.mailhol@gmail.com>,
Harald Mommer <Harald.Mommer@opensynergy.com>
Cc: virtio-dev@lists.oasis-open.org, linux-can@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Dariusz Stojaczyk <Dariusz.Stojaczyk@opensynergy.com>
Subject: [virtio-dev] Re: [RFC PATCH v2 2/2] can: virtio: Add virtio_can to MAINTAINERS file.
Date: Tue, 8 Nov 2022 20:22:25 +0100 [thread overview]
Message-ID: <bcf9fd32-1078-2c7f-0c2a-5848ac6571e8@opensynergy.com> (raw)
In-Reply-To: <9008244e-10ea-7983-50da-4716e213d119@opensynergy.com>
Hello Vincent,
sorry, my mistake, got it. I was absolutely convinced that commit 1 only
contained the code changes and commit 2 only contained the maintainers
file. But this is not the case, there was a last minute change and then
I did it wrong in git.
Regards
Harald
On 08.11.22 20:13, Harald Mommer wrote:
> Hello Vincent,
>
> what I see here are places from v1 which should be now obsolete and of
> no further interest. There was a patch v1, this has been reworked and
> now comes v2 which supersedes v1. Squashing is something I could do if
> I had 2 commits which should be joined together but here is probably
> not meant to squash the virtio_can.[ch] code file commit with the
> MAINTAINERS file commit.
>
> Could be that I misunderstood the way how is worked with patches on
> the mailing lists, don't know. I do absolutely not understand what you
> mean here.
>
> Regards
> Harald
>
> On 05.11.22 11:14, Vincent Mailhol wrote:
>> On Sat. 5 Nov. 2022 at 02:29, Harald Mommer
>> <Harald.Mommer@opensynergy.com> wrote:
>>> From: Harald Mommer <harald.mommer@opensynergy.com>
>>>
>>> Signed-off-by: Harald Mommer <Harald.Mommer@opensynergy.com>
>>> ---
>>> MAINTAINERS | 7 +++++++
>>> drivers/net/can/virtio_can.c | 6 ++----
>>> 2 files changed, 9 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 379945f82a64..01b2738b7c16 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -21692,6 +21692,13 @@ F: drivers/vhost/scsi.c
>>> F: include/uapi/linux/virtio_blk.h
>>> F: include/uapi/linux/virtio_scsi.h
>>>
>>> +VIRTIO CAN DRIVER
>>> +M: "Harald Mommer" <harald.mommer@opensynergy.com>
>>> +L: linux-can@vger.kernel.org
>>> +S: Maintained
>>> +F: drivers/net/can/virtio_can.c
>>> +F: include/uapi/linux/virtio_can.h
>>> +
>>> VIRTIO CONSOLE DRIVER
>>> M: Amit Shah <amit@kernel.org>
>>> L: virtualization@lists.linux-foundation.org
>>> diff --git a/drivers/net/can/virtio_can.c
>>> b/drivers/net/can/virtio_can.c
>>> index 43cf1c9e4afd..0e87172bbddf 100644
>>> --- a/drivers/net/can/virtio_can.c
>>> +++ b/drivers/net/can/virtio_can.c
>>> @@ -1,7 +1,7 @@
>>> -// SPDX-License-Identifier: GPL-2.0+
>>> +// SPDX-License-Identifier: GPL-2.0-only
>> Please squash this in the previous patch.
>>
>>> /*
>>> * CAN bus driver for the Virtio CAN controller
>>> - * Copyright (C) 2021 OpenSynergy GmbH
>>> + * Copyright (C) 2021-2022 OpenSynergy GmbH
>> Same.
>>
>>> */
>>>
>>> #include <linux/atomic.h>
>>> @@ -793,8 +793,6 @@ static void virtio_can_populate_vqs(struct
>>> virtio_device *vdev)
>>> unsigned int idx;
>>> int ret;
>>>
>>> - // TODO: Think again a moment if here locks already may be
>>> needed!
>> Same.
>>
>>> /* Fill RX queue */
>>> vq = priv->vqs[VIRTIO_CAN_QUEUE_RX];
>>> for (idx = 0u; idx < ARRAY_SIZE(priv->rpkt); idx++) {
>>> --
>>> 2.17.1
>>>
--
Dipl.-Ing. Harald Mommer
Senior Software Engineer
OpenSynergy GmbH
Rotherstr. 20, 10245 Berlin
Phone: +49 (30) 60 98 540-0 <== Zentrale
Fax: +49 (30) 60 98 540-99
E-Mail: harald.mommer@opensynergy.com
www.opensynergy.com
Handelsregister: Amtsgericht Charlottenburg, HRB 108616B
Geschäftsführer/Managing Director: Regis Adjamah
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
prev parent reply other threads:[~2022-11-08 19:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-04 17:24 [virtio-dev] [RFC PATCH v2 0/2] can: virtio: virtio-can driver Harald Mommer
2022-11-04 17:24 ` [virtio-dev] [RFC PATCH v2 1/2] can: virtio: Initial virtio CAN driver Harald Mommer
[not found] ` <4782632.31r3eYUQgx@steina-w>
[not found] ` <CAMZ6RqLALOYFWQJ4C4HTaRw7y-waUbqOX0WzrWVNiQG51QexHw@mail.gmail.com>
2023-05-17 11:43 ` [virtio-dev] " Harald Mommer
2022-11-04 17:24 ` [virtio-dev] [RFC PATCH v2 2/2] can: virtio: Add virtio_can to MAINTAINERS file Harald Mommer
[not found] ` <CAMZ6RqLUCs0W8ZP2jAUsFMUXgHTjce649Gu+jnz_S1x_0ER6YQ@mail.gmail.com>
2022-11-08 19:13 ` [virtio-dev] " Harald Mommer
2022-11-08 19:22 ` Harald Mommer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bcf9fd32-1078-2c7f-0c2a-5848ac6571e8@opensynergy.com \
--to=hmo@opensynergy.com \
--cc=Dariusz.Stojaczyk@opensynergy.com \
--cc=Harald.Mommer@opensynergy.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vincent.mailhol@gmail.com \
--cc=virtio-dev@lists.oasis-open.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox