[virtio-dev] Re: [PATCH v16 11/11] virtio-net: Update vqn to vq_index for cvq cmds

[David Edmondson <david.edmondson@oracle.com>]

Parav Pandit <parav@nvidia.com> writes:

> Replace field name vqn to vq_index for recent virtqueue level commands.
>
> Fixes: https://github.com/oasis-tcs/virtio-spec/issues/163
> Signed-off-by: Parav Pandit <parav@nvidia.com>
>

Reviewed-by: David Edmondson <david.edmondson@oracle.com>

> ---
> changelog:
> v12->v13:
> - new patch
> ---
>  device-types/net/description.tex | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/device-types/net/description.tex b/device-types/net/description.tex
> index 83bdaef..3030222 100644
> --- a/device-types/net/description.tex
> +++ b/device-types/net/description.tex
> @@ -1560,7 +1560,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  };
>  
>  struct virtio_net_ctrl_coal_vq {
> -    le16 vqn;
> +    le16 vq_index;
>      le16 reserved;
>      struct virtio_net_ctrl_coal coal;
>  };
> @@ -1574,7 +1574,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  
>  Coalescing parameters:
>  \begin{itemize}
> -\item \field{vqn}: The virtqueue number of an enabled transmit or receive virtqueue.
> +\item \field{vq_index}: The virtqueue index of an enabled transmit or receive virtqueue.
>  \item \field{max_usecs} for RX: Maximum number of microseconds to delay a RX notification.
>  \item \field{max_usecs} for TX: Maximum number of microseconds to delay a TX notification.
>  \item \field{max_packets} for RX: Maximum number of packets to receive before a RX notification.
> @@ -1587,7 +1587,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  \begin{itemize}
>  \item For commands VIRTIO_NET_CTRL_NOTF_COAL_TX_SET and VIRTIO_NET_CTRL_NOTF_COAL_RX_SET, the structure virtio_net_ctrl_coal is write-only for the driver.
>  \item For the command VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET, the structure virtio_net_ctrl_coal_vq is write-only for the driver.
> -\item For the command VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET, \field{vqn} and \field{reserved} are write-only
> +\item For the command VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET, \field{vq_index} and \field{reserved} are write-only
>        for the driver, and the structure virtio_net_ctrl_coal is read-only for the driver.
>  \end{itemize}
>  
> @@ -1596,9 +1596,9 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  \item VIRTIO_NET_CTRL_NOTF_COAL_TX_SET: use the structure virtio_net_ctrl_coal to set the \field{max_usecs} and \field{max_packets} parameters for all transmit virtqueues.
>  \item VIRTIO_NET_CTRL_NOTF_COAL_RX_SET: use the structure virtio_net_ctrl_coal to set the \field{max_usecs} and \field{max_packets} parameters for all receive virtqueues.
>  \item VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET: use the structure virtio_net_ctrl_coal_vq to set the \field{max_usecs} and \field{max_packets} parameters
> -                                        for an enabled transmit/receive virtqueue whose number is \field{vqn}.
> +                                        for an enabled transmit/receive virtqueue whose index is \field{vq_index}.
>  \item VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET: use the structure virtio_net_ctrl_coal_vq to get the \field{max_usecs} and \field{max_packets} parameters
> -                                        for an enabled transmit/receive virtqueue whose number is \field{vqn}.
> +                                        for an enabled transmit/receive virtqueue whose index is \field{vq_index}.
>  \end{enumerate}
>  
>  The device may generate notifications more or less frequently than specified by set commands of the VIRTIO_NET_CTRL_NOTF_COAL class.
> @@ -1608,12 +1608,12 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  with two pairs of virtqueues as an example:
>  Each of the following commands sets \field{max_usecs} and \field{max_packets} parameters for virtqueues.
>  \begin{itemize}
> -\item Command1: VIRTIO_NET_CTRL_NOTF_COAL_RX_SET sets coalescing parameters for virtqueues having vqn 0 and vqn 2. Virtqueues having vqn 1 and vqn 3 retain their previous parameters.
> -\item Command2: VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET with \field{vqn} = 0 sets coalescing parameters for virtqueue having vqn 0. Virtqueue having vqn 2 retains the parameters from command1.
> -\item Command3: VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET with \field{vqn} = 0, the device responds with coalescing parameters of vqn 0 set by command2.
> -\item Command4: VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET with \field{vqn} = 1 sets coalescing parameters for virtqueue having vqn 1. Virtqueue having vqn 3 retains its previous parameters.
> -\item Command5: VIRTIO_NET_CTRL_NOTF_COAL_TX_SET sets coalescing parameters for virtqueues having vqn 1 and vqn 3, and overrides the parameters set by command4.
> -\item Command6: VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET with \field{vqn} = 1, the device responds with coalescing parameters of vqn 1 set by command5.
> +\item Command1: VIRTIO_NET_CTRL_NOTF_COAL_RX_SET sets coalescing parameters for virtqueues having index 0 and index 2. Virtqueues having index 1 and index 3 retain their previous parameters.
> +\item Command2: VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET with \field{vq_index} = 0 sets coalescing parameters for virtqueue having index 0. Virtqueue having index 2 retains the parameters from command1.
> +\item Command3: VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET with \field{vq_index} = 0, the device responds with coalescing parameters of vq_index 0 set by command2.
> +\item Command4: VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET with \field{vq_index} = 1 sets coalescing parameters for virtqueue having index 1. Virtqueue having index 3 retains its previous parameters.
> +\item Command5: VIRTIO_NET_CTRL_NOTF_COAL_TX_SET sets coalescing parameters for virtqueues having index 1 and index 3, and overrides the parameters set by command4.
> +\item Command6: VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET with \field{vq_index} = 1, the device responds with coalescing parameters of index 1 set by command5.
>  \end{itemize}
>  
>  \subparagraph{Operation}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Notifications Coalescing / Operation}
> @@ -1663,7 +1663,7 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi
>  
>  \drivernormative{\subparagraph}{Notifications Coalescing}{Device Types / Network Device / Device Operation / Control Virtqueue / Notifications Coalescing}
>  
> -The driver MUST set \field{vqn} to the virtqueue number of an enabled transmit or receive virtqueue.
> +The driver MUST set \field{vq_index} to the virtqueue index of an enabled transmit or receive virtqueue.
>  
>  The driver MUST have negotiated the VIRTIO_NET_F_NOTF_COAL feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_TX_SET and VIRTIO_NET_CTRL_NOTF_COAL_RX_SET.
>  
> -- 
> 2.26.2
-- 
"Can I take you out to the pictures, Joan?"

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org