From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jens Osterkamp Subject: implementation of IEEE 802.1Qbg in lldpad Date: Mon, 8 Nov 2010 17:11:51 +0100 Message-ID: <1289232720-27443-1-git-send-email-jens@linux.vnet.ibm.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: virtualization-bounces@lists.linux-foundation.org Errors-To: virtualization-bounces@lists.linux-foundation.org To: e1000-eedc@lists.sourceforge.net, virtualization@lists.linux-foundation.org, evb@yahoogroups.com Cc: chrisw@redhat.com List-Id: virtualization@lists.linuxfoundation.org Hi, this set of patches contains the initial implementation of the IEEE 802.1Qbg standard: code for the exchange of EVB TLVs in LLDP frames to negotiate VSI capabalities as well as VDP VSI TLVs between a host with virtual machines and an adjacent switch. It supports setting the parameters of the TLV exchange from the command line using lldptool. VDP profiles consisting of mode,mgrid,typeid,typeidversion,instanceid,mac,vlan can be given to lldpad with lldptool or sent to lldpad via netlink messages from the kernel or another program, e.g. libvirt. VDP profiles are processed through the VDP/VSI and ECP state machines and sent out in ECP frames. ACK frames are received and processed through ECP and VDP/VSI state machines. It implements a VDP bridge role for a port together with a lldptool command to switch a port to the bridge role. These patches apply against lldpad 0.9.38. Protocol debug messages are now logged to syslog via LLDPAD_* macros and no longer to console. If you want to see them, configure your syslog daemon to collect debug messages and start lldpad with -V 7. Changes since last posting: - fix to prevent parsing of TLVs across frame boundary - fixed two minor memleaks in lldp_vdp_cmds.c and event_iface.c - fixed typo For more information about lldpad take a look at http://sourceforge.net/projects/e1000/files/DCB%20Tools/lldpad/ Please review and comment. Thanks ! Jens