From: Juergen Gross <jgross@suse.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org, hpa@zytor.com,
tglx@linutronix.de, mingo@redhat.com, jeremy@goop.org,
chrisw@sous-sol.org, akataria@vmware.com, rusty@rustcorp.com.au,
virtualization@lists.linux-foundation.org,
xen-devel@lists.xen.org, konrad.wilk@oracle.com,
david.vrabel@citrix.com, boris.ostrovsky@oracle.com
Cc: Juergen Gross <jgross@suse.com>
Subject: [PATCH] paravirt: remove paravirt ops pmd_update_defer and pte_update_defer
Date: Tue, 17 Nov 2015 15:46:43 +0100 [thread overview]
Message-ID: <1447771603-9918-1-git-send-email-jgross@suse.com> (raw)
pte_update_defer can be removed as it is always set to the same
function as pte_update. So any usage of pte_update_defer() can be
replaced by pte_update().
pmd_update_defer is always set to paravirt_nop, so it can just be
nuked.
Signed-off-by: Juergen Gross <jgross@suse.com>
---
arch/x86/include/asm/paravirt.h | 12 ------------
arch/x86/include/asm/paravirt_types.h | 4 ----
arch/x86/include/asm/pgtable.h | 9 +--------
arch/x86/kernel/paravirt.c | 2 --
arch/x86/lguest/boot.c | 1 -
arch/x86/mm/pgtable.c | 3 +--
arch/x86/xen/mmu.c | 1 -
7 files changed, 2 insertions(+), 30 deletions(-)
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 10d0596..10c39b9 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -381,18 +381,6 @@ static inline void pmd_update(struct mm_struct *mm, unsigned long addr,
PVOP_VCALL3(pv_mmu_ops.pmd_update, mm, addr, pmdp);
}
-static inline void pte_update_defer(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- PVOP_VCALL3(pv_mmu_ops.pte_update_defer, mm, addr, ptep);
-}
-
-static inline void pmd_update_defer(struct mm_struct *mm, unsigned long addr,
- pmd_t *pmdp)
-{
- PVOP_VCALL3(pv_mmu_ops.pmd_update_defer, mm, addr, pmdp);
-}
-
static inline pte_t __pte(pteval_t val)
{
pteval_t ret;
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 31247b5..274727e 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -274,12 +274,8 @@ struct pv_mmu_ops {
pmd_t *pmdp, pmd_t pmdval);
void (*pte_update)(struct mm_struct *mm, unsigned long addr,
pte_t *ptep);
- void (*pte_update_defer)(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep);
void (*pmd_update)(struct mm_struct *mm, unsigned long addr,
pmd_t *pmdp);
- void (*pmd_update_defer)(struct mm_struct *mm,
- unsigned long addr, pmd_t *pmdp);
pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
pte_t *ptep);
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 6ec0c8b..5126367 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -69,9 +69,7 @@ extern struct mm_struct *pgd_page_get_mm(struct page *page);
#define pmd_clear(pmd) native_pmd_clear(pmd)
#define pte_update(mm, addr, ptep) do { } while (0)
-#define pte_update_defer(mm, addr, ptep) do { } while (0)
#define pmd_update(mm, addr, ptep) do { } while (0)
-#define pmd_update_defer(mm, addr, ptep) do { } while (0)
#define pgd_val(x) native_pgd_val(x)
#define __pgd(x) native_make_pgd(x)
@@ -731,14 +729,9 @@ static inline void native_set_pmd_at(struct mm_struct *mm, unsigned long addr,
* updates should either be sets, clears, or set_pte_atomic for P->P
* transitions, which means this hook should only be called for user PTEs.
* This hook implies a P->P protection or access change has taken place, which
- * requires a subsequent TLB flush. The notification can optionally be delayed
- * until the TLB flush event by using the pte_update_defer form of the
- * interface, but care must be taken to assure that the flush happens while
- * still holding the same page table lock so that the shadow and primary pages
- * do not become out of sync on SMP.
+ * requires a subsequent TLB flush.
*/
#define pte_update(mm, addr, ptep) do { } while (0)
-#define pte_update_defer(mm, addr, ptep) do { } while (0)
#endif
/*
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index c2130ae..3ac7b85 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -444,9 +444,7 @@ struct pv_mmu_ops pv_mmu_ops = {
.set_pmd = native_set_pmd,
.set_pmd_at = native_set_pmd_at,
.pte_update = paravirt_nop,
- .pte_update_defer = paravirt_nop,
.pmd_update = paravirt_nop,
- .pmd_update_defer = paravirt_nop,
.ptep_modify_prot_start = __ptep_modify_prot_start,
.ptep_modify_prot_commit = __ptep_modify_prot_commit,
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a0d09f6..a1900d4 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1472,7 +1472,6 @@ __init void lguest_init(void)
pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode;
pv_mmu_ops.lazy_mode.flush = paravirt_flush_lazy_mmu;
pv_mmu_ops.pte_update = lguest_pte_update;
- pv_mmu_ops.pte_update_defer = lguest_pte_update;
#ifdef CONFIG_X86_LOCAL_APIC
/* APIC read/write intercepts */
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index fb0a9dd..3d8fc45 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -414,7 +414,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
if (changed && dirty) {
*ptep = entry;
- pte_update_defer(vma->vm_mm, address, ptep);
+ pte_update(vma->vm_mm, address, ptep);
}
return changed;
@@ -431,7 +431,6 @@ int pmdp_set_access_flags(struct vm_area_struct *vma,
if (changed && dirty) {
*pmdp = entry;
- pmd_update_defer(vma->vm_mm, address, pmdp);
/*
* We had a write-protection fault here and changed the pmd
* to to more permissive. No need to flush the TLB for that,
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index ac161db..896dc14 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2436,7 +2436,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initconst = {
.flush_tlb_others = xen_flush_tlb_others,
.pte_update = paravirt_nop,
- .pte_update_defer = paravirt_nop,
.pgd_alloc = xen_pgd_alloc,
.pgd_free = xen_pgd_free,
--
2.6.2
next reply other threads:[~2015-11-17 14:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 14:46 Juergen Gross [this message]
2015-11-17 14:47 ` [PATCH] paravirt: remove paravirt ops pmd_update_defer and pte_update_defer Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447771603-9918-1-git-send-email-jgross@suse.com \
--to=jgross@suse.com \
--cc=akataria@vmware.com \
--cc=boris.ostrovsky@oracle.com \
--cc=chrisw@sous-sol.org \
--cc=david.vrabel@citrix.com \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rusty@rustcorp.com.au \
--cc=tglx@linutronix.de \
--cc=virtualization@lists.linux-foundation.org \
--cc=x86@kernel.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox