From: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
To: Shannon Nelson <shannon.nelson@amd.com>
Cc: brett.creeley@amd.com, mst@redhat.com, netdev@vger.kernel.org,
virtualization@lists.linux-foundation.org, drivers@pensando.io
Subject: Re: [PATCH v4 virtio 01/10] virtio: allow caller to override device id and DMA mask
Date: Wed, 26 Apr 2023 10:09:57 +0800 [thread overview]
Message-ID: <1682474997.6771185-1-xuanzhuo@linux.alibaba.com> (raw)
In-Reply-To: <20230425212602.1157-2-shannon.nelson@amd.com>
On Tue, 25 Apr 2023 14:25:53 -0700, Shannon Nelson <shannon.nelson@amd.com> wrote:
> To add a bit of flexibility with various virtio based devices, allow
> the caller to specify a different device id and DMA mask. This adds
> fields to struct virtio_pci_modern_device to specify an override device
> id check and a DMA mask.
>
> int (*device_id_check)(struct pci_dev *pdev);
> If defined by the driver, this function will be called to check
> that the PCI device is the vendor's expected device, and will
> return the found device id to be stored in mdev->id.device.
> This allows vendors with alternative vendor device ids to use
> this library on their own device BAR.
>
> u64 dma_mask;
> If defined by the driver, this mask will be used in a call to
> dma_set_mask_and_coherent() instead of the traditional
> DMA_BIT_MASK(64). This allows limiting the DMA space on
> vendor devices with address limitations.
>
> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
> ---
> drivers/virtio/virtio_pci_modern_dev.c | 37 +++++++++++++++++---------
> include/linux/virtio_pci_modern.h | 6 +++++
> 2 files changed, 31 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/virtio/virtio_pci_modern_dev.c b/drivers/virtio/virtio_pci_modern_dev.c
> index 869cb46bef96..1f2db76e8f91 100644
> --- a/drivers/virtio/virtio_pci_modern_dev.c
> +++ b/drivers/virtio/virtio_pci_modern_dev.c
> @@ -218,21 +218,29 @@ int vp_modern_probe(struct virtio_pci_modern_device *mdev)
> int err, common, isr, notify, device;
> u32 notify_length;
> u32 notify_offset;
> + int devid;
>
> check_offsets();
>
> - /* We only own devices >= 0x1000 and <= 0x107f: leave the rest. */
> - if (pci_dev->device < 0x1000 || pci_dev->device > 0x107f)
> - return -ENODEV;
> -
> - if (pci_dev->device < 0x1040) {
> - /* Transitional devices: use the PCI subsystem device id as
> - * virtio device id, same as legacy driver always did.
> - */
> - mdev->id.device = pci_dev->subsystem_device;
> + if (mdev->device_id_check) {
> + devid = mdev->device_id_check(pci_dev);
> + if (devid < 0)
> + return devid;
I would want to know is there any other reason to return the errno?
How about return -ENODEV directly?
Thanks.
> + mdev->id.device = devid;
> } else {
> - /* Modern devices: simply use PCI device id, but start from 0x1040. */
> - mdev->id.device = pci_dev->device - 0x1040;
> + /* We only own devices >= 0x1000 and <= 0x107f: leave the rest. */
> + if (pci_dev->device < 0x1000 || pci_dev->device > 0x107f)
> + return -ENODEV;
> +
> + if (pci_dev->device < 0x1040) {
> + /* Transitional devices: use the PCI subsystem device id as
> + * virtio device id, same as legacy driver always did.
> + */
> + mdev->id.device = pci_dev->subsystem_device;
> + } else {
> + /* Modern devices: simply use PCI device id, but start from 0x1040. */
> + mdev->id.device = pci_dev->device - 0x1040;
> + }
> }
> mdev->id.vendor = pci_dev->subsystem_vendor;
>
> @@ -260,7 +268,12 @@ int vp_modern_probe(struct virtio_pci_modern_device *mdev)
> return -EINVAL;
> }
>
> - err = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64));
> + if (mdev->dma_mask)
> + err = dma_set_mask_and_coherent(&pci_dev->dev,
> + mdev->dma_mask);
> + else
> + err = dma_set_mask_and_coherent(&pci_dev->dev,
> + DMA_BIT_MASK(64));
> if (err)
> err = dma_set_mask_and_coherent(&pci_dev->dev,
> DMA_BIT_MASK(32));
> diff --git a/include/linux/virtio_pci_modern.h b/include/linux/virtio_pci_modern.h
> index c4eeb79b0139..067ac1d789bc 100644
> --- a/include/linux/virtio_pci_modern.h
> +++ b/include/linux/virtio_pci_modern.h
> @@ -38,6 +38,12 @@ struct virtio_pci_modern_device {
> int modern_bars;
>
> struct virtio_device_id id;
> +
> + /* optional check for vendor virtio device, returns dev_id or -ERRNO */
> + int (*device_id_check)(struct pci_dev *pdev);
> +
> + /* optional mask for devices with limited DMA space */
> + u64 dma_mask;
> };
>
> /*
> --
> 2.17.1
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
next prev parent reply other threads:[~2023-04-26 2:12 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-25 21:25 [PATCH v4 virtio 00/10] pds_vdpa driver Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 01/10] virtio: allow caller to override device id and DMA mask Shannon Nelson via Virtualization
2023-04-26 2:09 ` Xuan Zhuo [this message]
2023-04-26 2:41 ` Shannon Nelson via Virtualization
[not found] ` <ZE/QS0lnUvxFacjf@corigine.com>
2023-05-03 14:21 ` Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 02/10] pds_vdpa: Add new vDPA driver for AMD/Pensando DSC Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 03/10] pds_vdpa: move enum from common to adminq header Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 04/10] pds_vdpa: new adminq entries Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 05/10] pds_vdpa: get vdpa management info Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 06/10] pds_vdpa: virtio bar setup for vdpa Shannon Nelson via Virtualization
2023-04-25 21:25 ` [PATCH v4 virtio 07/10] pds_vdpa: add vdpa config client commands Shannon Nelson via Virtualization
2023-04-25 21:26 ` [PATCH v4 virtio 08/10] pds_vdpa: add support for vdpa and vdpamgmt interfaces Shannon Nelson via Virtualization
2023-04-25 21:26 ` [PATCH v4 virtio 09/10] pds_vdpa: subscribe to the pds_core events Shannon Nelson via Virtualization
2023-04-25 21:26 ` [PATCH v4 virtio 10/10] pds_vdpa: pds_vdps.rst and Kconfig Shannon Nelson via Virtualization
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1682474997.6771185-1-xuanzhuo@linux.alibaba.com \
--to=xuanzhuo@linux.alibaba.com \
--cc=brett.creeley@amd.com \
--cc=drivers@pensando.io \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=shannon.nelson@amd.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox