Re: [PATCH 3/3] virtio PCI device

[Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>]

On Tuesday 27 November 2007, Avi Kivity wrote:
> > :-)  Do you know if there is a hard limit on the number of devices on 
> > a PCI bus?  My concern was that it was limited by something stupid 
> > like an 8-bit identifier.
> 
> IIRC pci slots are 8-bit, but you can have multiple buses, so 
> effectively 16 bits of device address space (discounting functions which 
> are likely not hot-pluggable).

You have an 8 bit bus number and an 8 bit device/function number.
The function number is 3 bits, so if you want to use only function 0
for everything, you are limited to a little under 8192 (2^(8+5)) devices
per PCI domain. PC style hardware cannot easily address multiple PCI
domains, but I think you can have them if you assume that the guest is
using mmconfig.

For using multiple buses, the easiest way could be to have every
device/function on bus 0 be a bridge by itself, so you end up with a
flat number space for the actual devices,

$ lspci -t
 [0000:00]-+-00.0-[0000:01]--+-00.0
           |                 +-01.0
           |                 +-02.0
           |                 + ...
           |                 \-3f.0
           +-00.1-[0000:02]--+-00.0
           |                 +-01.0
           |                 +-02.0
           |                 + ...
           |                 \-3f.0
           + ...
           |
           +-3f.6-[0000:ff]--+-00.0
                             +-01.0
                             +-02.0
                             + ...
                             \-3f.0

	Arnd <><

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/