From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com,
Petr Matousek <pmatouse@redhat.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
stable@vger.kernel.org,
virtualization@lists.linux-foundation.org,
Jan Beulich <JBeulich@suse.com>
Subject: Re: [Xen-devel] [PATCH] x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
Date: Thu, 14 Feb 2013 17:55:44 -0500 [thread overview]
Message-ID: <20130214225544.GA8068@phenom.dumpdata.com> (raw)
In-Reply-To: <20130214215216.GA18740@kroah.com>
On Thu, Feb 14, 2013 at 01:52:16PM -0800, Greg KH wrote:
> Jan, any reason why this patch isn't in Linus's tree already, and why it
Sent out the GIT PULL this week to Linus
> wasn't marked for inclusion in a -stable kernel release?
I forgot to stick that. Do please include it in the stable tree.
>
> thanks,
>
> greg k-h
>
>
> On Thu, Jan 24, 2013 at 01:11:10PM +0000, Jan Beulich wrote:
> > This fixes CVE-2013-0228 / XSA-42
> >
> > Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user
> > in 32bit PV guest can use to crash the > guest with the panic like this:
> >
> > -------------
> > general protection fault: 0000 [#1] SMP
> > last sysfs file: /sys/devices/vbd-51712/block/xvda/dev
> > Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4
> > iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6
> > xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4
> > mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last
> > unloaded: scsi_wait_scan]
> >
> > Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1
> > EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0
> > EIP is at xen_iret+0x12/0x2b
> > EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010
> > ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0
> > DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069
> > Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000)
> > Stack:
> > 00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000
> > Call Trace:
> > Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00
> > 8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40
> > 10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02
> > EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0
> > general protection fault: 0000 [#2]
> > ---[ end trace ab0d29a492dcd330 ]---
> > Kernel panic - not syncing: Fatal exception
> > Pid: 1250, comm: r Tainted: G D ---------------
> > 2.6.32-356.el6.i686 #1
> > Call Trace:
> > [<c08476df>] ? panic+0x6e/0x122
> > [<c084b63c>] ? oops_end+0xbc/0xd0
> > [<c084b260>] ? do_general_protection+0x0/0x210
> > [<c084a9b7>] ? error_code+0x73/
> > -------------
> >
> > Petr says: "
> > I've analysed the bug and I think that xen_iret() cannot cope with
> > mangled DS, in this case zeroed out (null selector/descriptor) by either
> > xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT
> > entry was invalidated by the reproducer. "
> >
> > Jan took a look at the preliminary patch and came up a fix that solves
> > this problem:
> >
> > "This code gets called after all registers other than those handled by
> > IRET got already restored, hence a null selector in %ds or a non-null
> > one that got loaded from a code or read-only data descriptor would
> > cause a kernel mode fault (with the potential of crashing the kernel
> > as a whole, if panic_on_oops is set)."
> >
> > The way to fix this is to realize that the we can only relay on the
> > registers that IRET restores. The two that are guaranteed are the
> > %cs and %ss as they are always fixed GDT selectors. Also they are
> > inaccessible from user mode - so they cannot be altered. This is
> > the approach taken in this patch.
> >
> > Another alternative option suggested by Jan would be to relay on
> > the subtle realization that using the %ebp or %esp relative references uses
> > the %ss segment. In which case we could switch from using %eax to %ebp and
> > would not need the %ss over-rides. That would also require one extra
> > instruction to compensate for the one place where the register is used
> > as scaled index. However Andrew pointed out that is too subtle and if
> > further work was to be done in this code-path it could escape folks attention
> > and lead to accidents.
> >
> > Reviewed-by: Petr Matousek <pmatouse@redhat.com>
> > Reported-by: Petr Matousek <pmatouse@redhat.com>
> > Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
> > Signed-off-by: Jan Beulich <jbeulich@suse.com>
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > ---
> > arch/x86/xen/xen-asm_32.S | 14 +++++++-------
> > 1 file changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
> > index f9643fc..33ca6e4 100644
> > --- a/arch/x86/xen/xen-asm_32.S
> > +++ b/arch/x86/xen/xen-asm_32.S
> > @@ -89,11 +89,11 @@ ENTRY(xen_iret)
> > */
> > #ifdef CONFIG_SMP
> > GET_THREAD_INFO(%eax)
> > - movl TI_cpu(%eax), %eax
> > - movl __per_cpu_offset(,%eax,4), %eax
> > - mov xen_vcpu(%eax), %eax
> > + movl %ss:TI_cpu(%eax), %eax
> > + movl %ss:__per_cpu_offset(,%eax,4), %eax
> > + mov %ss:xen_vcpu(%eax), %eax
> > #else
> > - movl xen_vcpu, %eax
> > + movl %ss:xen_vcpu, %eax
> > #endif
> >
> > /* check IF state we're restoring */
> > @@ -106,11 +106,11 @@ ENTRY(xen_iret)
> > * resuming the code, so we don't have to be worried about
> > * being preempted to another CPU.
> > */
> > - setz XEN_vcpu_info_mask(%eax)
> > + setz %ss:XEN_vcpu_info_mask(%eax)
> > xen_iret_start_crit:
> >
> > /* check for unmasked and pending */
> > - cmpw $0x0001, XEN_vcpu_info_pending(%eax)
> > + cmpw $0x0001, %ss:XEN_vcpu_info_pending(%eax)
> >
> > /*
> > * If there's something pending, mask events again so we can
> > @@ -118,7 +118,7 @@ xen_iret_start_crit:
> > * touch XEN_vcpu_info_mask.
> > */
> > jne 1f
> > - movb $1, XEN_vcpu_info_mask(%eax)
> > + movb $1, %ss:XEN_vcpu_info_mask(%eax)
> >
> > 1: popl %eax
> >
> > --
> > 1.8.0.2
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
>
next parent reply other threads:[~2013-02-14 22:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20130214215216.GA18740@kroah.com>
2013-02-14 22:55 ` Konrad Rzeszutek Wilk [this message]
2013-02-17 19:13 ` [Xen-devel] [PATCH] x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS Ben Hutchings
2013-02-15 7:56 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130214225544.GA8068@phenom.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=JBeulich@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=gregkh@linuxfoundation.org \
--cc=jeremy@goop.org \
--cc=pmatouse@redhat.com \
--cc=stable@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).