From: "Michael S. Tsirkin" <mst@redhat.com>
To: Michael Dalton <mwdalton@google.com>
Cc: netdev@vger.kernel.org,
virtualization@lists.linux-foundation.org,
Eric Dumazet <edumazet@google.com>,
Ben Hutchings <bhutchings@solarflare.com>,
"David S. Miller" <davem@davemloft.net>
Subject: Re: [PATCH net-next v4 6/6] virtio-net: initial rx sysfs support, export mergeable rx buffer size
Date: Thu, 16 Jan 2014 22:25:38 +0200 [thread overview]
Message-ID: <20140116202538.GK29522@redhat.com> (raw)
In-Reply-To: <1389901950-3854-6-git-send-email-mwdalton@google.com>
On Thu, Jan 16, 2014 at 11:52:30AM -0800, Michael Dalton wrote:
> Add initial support for per-rx queue sysfs attributes to virtio-net. If
> mergeable packet buffers are enabled, adds a read-only mergeable packet
> buffer size sysfs attribute for each RX queue.
>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Michael Dalton <mwdalton@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> v3->v4: Remove seqcount due to EWMA changes in patch 5.
> Add missing Suggested-By.
>
> drivers/net/virtio_net.c | 46 ++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 42 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 3e82311..968eacd 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -604,18 +604,25 @@ static int add_recvbuf_big(struct receive_queue *rq, gfp_t gfp)
> return err;
> }
>
> -static int add_recvbuf_mergeable(struct receive_queue *rq, gfp_t gfp)
> +static unsigned int get_mergeable_buf_len(struct ewma *avg_pkt_len)
> {
> const size_t hdr_len = sizeof(struct virtio_net_hdr_mrg_rxbuf);
> + unsigned int len;
> +
> + len = hdr_len + clamp_t(unsigned int, ewma_read(avg_pkt_len),
> + GOOD_PACKET_LEN, PAGE_SIZE - hdr_len);
> + return ALIGN(len, MERGEABLE_BUFFER_ALIGN);
> +}
> +
> +static int add_recvbuf_mergeable(struct receive_queue *rq, gfp_t gfp)
> +{
> struct page_frag *alloc_frag = &rq->alloc_frag;
> char *buf;
> unsigned long ctx;
> int err;
> unsigned int len, hole;
>
> - len = hdr_len + clamp_t(unsigned int, ewma_read(&rq->mrg_avg_pkt_len),
> - GOOD_PACKET_LEN, PAGE_SIZE - hdr_len);
> - len = ALIGN(len, MERGEABLE_BUFFER_ALIGN);
> + len = get_mergeable_buf_len(&rq->mrg_avg_pkt_len);
> if (unlikely(!skb_page_frag_refill(len, alloc_frag, gfp)))
> return -ENOMEM;
>
> @@ -1594,6 +1601,33 @@ err:
> return ret;
> }
>
> +#ifdef CONFIG_SYSFS
> +static ssize_t mergeable_rx_buffer_size_show(struct netdev_rx_queue *queue,
> + struct rx_queue_attribute *attribute, char *buf)
> +{
> + struct virtnet_info *vi = netdev_priv(queue->dev);
> + unsigned int queue_index = get_netdev_rx_queue_index(queue);
> + struct ewma *avg;
> +
> + BUG_ON(queue_index >= vi->max_queue_pairs);
> + avg = &vi->rq[queue_index].mrg_avg_pkt_len;
> + return sprintf(buf, "%u\n", get_mergeable_buf_len(avg));
> +}
> +
> +static struct rx_queue_attribute mergeable_rx_buffer_size_attribute =
> + __ATTR_RO(mergeable_rx_buffer_size);
> +
> +static struct attribute *virtio_net_mrg_rx_attrs[] = {
> + &mergeable_rx_buffer_size_attribute.attr,
> + NULL
> +};
> +
> +static const struct attribute_group virtio_net_mrg_rx_group = {
> + .name = "virtio_net",
> + .attrs = virtio_net_mrg_rx_attrs
> +};
> +#endif
> +
> static int virtnet_probe(struct virtio_device *vdev)
> {
> int i, err;
> @@ -1708,6 +1742,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> if (err)
> goto free_stats;
>
> +#ifdef CONFIG_SYSFS
> + if (vi->mergeable_rx_bufs)
> + dev->sysfs_rx_queue_group = &virtio_net_mrg_rx_group;
> +#endif
> netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs);
> netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs);
>
> --
> 1.8.5.2
next prev parent reply other threads:[~2014-01-16 20:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-16 19:52 [PATCH net-next v4 1/6] net: allow > 0 order atomic page alloc in skb_page_frag_refill Michael Dalton
2014-01-16 19:52 ` [PATCH net-next v4 2/6] virtio-net: use per-receive queue page frag alloc for mergeable bufs Michael Dalton
2014-01-16 20:24 ` Michael S. Tsirkin
2014-01-16 19:52 ` [PATCH net-next v4 3/6] virtio-net: auto-tune mergeable rx buffer size for improved performance Michael Dalton
2014-01-16 19:52 ` [PATCH net-next v4 4/6] net-sysfs: add support for device-specific rx queue sysfs attributes Michael Dalton
2014-01-16 20:25 ` Michael S. Tsirkin
2014-01-16 19:52 ` [PATCH net-next v4 5/6] lib: Ensure EWMA does not store wrong intermediate values Michael Dalton
2014-01-16 20:08 ` Eric Dumazet
2014-01-16 20:25 ` Michael S. Tsirkin
2014-01-16 19:52 ` [PATCH net-next v4 6/6] virtio-net: initial rx sysfs support, export mergeable rx buffer size Michael Dalton
[not found] ` <1389901950-3854-3-git-send-email-mwdalton@google.com>
2014-01-16 20:24 ` [PATCH net-next v4 3/6] virtio-net: auto-tune mergeable rx buffer size for improved performance Michael S. Tsirkin
[not found] ` <1389901950-3854-6-git-send-email-mwdalton@google.com>
2014-01-16 20:25 ` Michael S. Tsirkin [this message]
2014-01-16 23:28 ` [PATCH net-next v4 1/6] net: allow > 0 order atomic page alloc in skb_page_frag_refill David Miller
2014-01-16 23:30 ` David Miller
[not found] ` <20140116.153020.587523865163482894.davem@davemloft.net>
2014-01-17 0:30 ` Michael Dalton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140116202538.GK29522@redhat.com \
--to=mst@redhat.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=mwdalton@google.com \
--cc=netdev@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).