* [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family [not found] <1479802223-121104-1-git-send-email-arei.gonglei@huawei.com> @ 2016-11-22 8:10 ` Gonglei 2016-11-22 8:10 ` [PATCH v2 2/2] crypto: add virtio-crypto driver Gonglei ` (3 subsequent siblings) 4 siblings, 0 replies; 13+ messages in thread From: Gonglei @ 2016-11-22 8:10 UTC (permalink / raw) To: linux-kernel, qemu-devel, virtio-dev, virtualization, linux-crypto Cc: weidong.huang, claudio.fontana, mst, luonengjun, hanweidong, xuquan8, salvatore.benedetto, Gonglei, stefanha, jianjay.zhou, longpeng2, arei.gonglei, davem, wu.wubin, herbert Virtio modern devices are always little edian, let's introduce the LE functions for read/write configuration space for virtio modern devices, which avoid complaint by Sparse when we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. Signed-off-by: Gonglei <arei.gonglei@huawei.com> --- include/linux/virtio_config.h | 45 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 26c155b..de05707 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct virtio_device *vdev, _r; \ }) +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, + unsigned int offset) +{ + __le16 ret; + + vdev->config->get(vdev, offset, &ret, sizeof(ret)); + return ret; +} + +static inline void virtio_cwrite16_le(struct virtio_device *vdev, + unsigned int offset, __le16 val) +{ + vdev->config->set(vdev, offset, &val, sizeof(val)); +} + +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, + unsigned int offset) +{ + __le32 ret; + + vdev->config->get(vdev, offset, &ret, sizeof(ret)); + return ret; +} + +static inline void virtio_cwrite32_le(struct virtio_device *vdev, + unsigned int offset, __le32 val) +{ + vdev->config->set(vdev, offset, &val, sizeof(val)); +} + +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, + unsigned int offset) +{ + __le64 ret; + + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); + return ret; +} + +static inline void virtio_cwrite64_le(struct virtio_device *vdev, + unsigned int offset, __le64 val) +{ + vdev->config->set(vdev, offset, &val, sizeof(val)); +} + #endif /* _LINUX_VIRTIO_CONFIG_H */ -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2 2/2] crypto: add virtio-crypto driver [not found] <1479802223-121104-1-git-send-email-arei.gonglei@huawei.com> 2016-11-22 8:10 ` [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family Gonglei @ 2016-11-22 8:10 ` Gonglei 2016-11-26 9:38 ` [PATCH v2 0/2] virtio-crypto: add Linux driver Gonglei (Arei) ` (2 subsequent siblings) 4 siblings, 0 replies; 13+ messages in thread From: Gonglei @ 2016-11-22 8:10 UTC (permalink / raw) To: linux-kernel, qemu-devel, virtio-dev, virtualization, linux-crypto Cc: weidong.huang, claudio.fontana, mst, luonengjun, hanweidong, xuquan8, salvatore.benedetto, Gonglei, stefanha, jianjay.zhou, longpeng2, arei.gonglei, davem, wu.wubin, herbert This patch introduces virtio-crypto driver for Linux Kernel. The virtio crypto device is a virtual cryptography device as well as a kind of virtual hardware accelerator for virtual machines. The encryption anddecryption requests are placed in the data queue and are ultimately handled by thebackend crypto accelerators. The second queue is the control queue used to create or destroy sessions for symmetric algorithms and will control some advanced features in the future. The virtio crypto device provides the following cryptoservices: CIPHER, MAC, HASH, and AEAD. For more information about virtio-crypto device, please see: http://qemu-project.org/Features/VirtioCrypto CC: Michael S. Tsirkin <mst@redhat.com> CC: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Halil Pasic <pasic@linux.vnet.ibm.com> CC: David S. Miller <davem@davemloft.net> CC: Zeng Xin <xin.zeng@intel.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> --- MAINTAINERS | 8 + drivers/crypto/Kconfig | 2 + drivers/crypto/Makefile | 1 + drivers/crypto/virtio/Kconfig | 10 + drivers/crypto/virtio/Makefile | 5 + drivers/crypto/virtio/virtio_crypto.c | 444 +++++++++++++++++++++++ drivers/crypto/virtio/virtio_crypto_algs.c | 524 +++++++++++++++++++++++++++ drivers/crypto/virtio/virtio_crypto_common.h | 124 +++++++ drivers/crypto/virtio/virtio_crypto_mgr.c | 258 +++++++++++++ include/uapi/linux/Kbuild | 1 + include/uapi/linux/virtio_crypto.h | 435 ++++++++++++++++++++++ include/uapi/linux/virtio_ids.h | 1 + 12 files changed, 1813 insertions(+) create mode 100644 drivers/crypto/virtio/Kconfig create mode 100644 drivers/crypto/virtio/Makefile create mode 100644 drivers/crypto/virtio/virtio_crypto.c create mode 100644 drivers/crypto/virtio/virtio_crypto_algs.c create mode 100644 drivers/crypto/virtio/virtio_crypto_common.h create mode 100644 drivers/crypto/virtio/virtio_crypto_mgr.c create mode 100644 include/uapi/linux/virtio_crypto.h diff --git a/MAINTAINERS b/MAINTAINERS index 411e3b8..d6b18bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12844,6 +12844,14 @@ S: Maintained F: drivers/virtio/virtio_input.c F: include/uapi/linux/virtio_input.h +VIRTIO CRYPTO DRIVER +M: Gonglei <arei.gonglei@huawei.com> +L: virtualization@lists.linux-foundation.org +L: linux-crypto@vger.kernel.org +S: Maintained +F: drivers/crypto/virtio/ +F: include/uapi/linux/virtio_crypto.h + VIA RHINE NETWORK DRIVER S: Orphan F: drivers/net/ethernet/via/via-rhine.c diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 4d2b81f..7956478 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -555,4 +555,6 @@ config CRYPTO_DEV_ROCKCHIP source "drivers/crypto/chelsio/Kconfig" +source "drivers/crypto/virtio/Kconfig" + endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index ad7250f..bc53cb8 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/ obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/ obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/ +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/ diff --git a/drivers/crypto/virtio/Kconfig b/drivers/crypto/virtio/Kconfig new file mode 100644 index 0000000..ceae88c --- /dev/null +++ b/drivers/crypto/virtio/Kconfig @@ -0,0 +1,10 @@ +config CRYPTO_DEV_VIRTIO + tristate "VirtIO crypto driver" + depends on VIRTIO + select CRYPTO_AEAD + select CRYPTO_AUTHENC + select CRYPTO_BLKCIPHER + default m + help + This driver provides support for virtio crypto device. If you + choose 'M' here, this module will be called virtio-crypto. diff --git a/drivers/crypto/virtio/Makefile b/drivers/crypto/virtio/Makefile new file mode 100644 index 0000000..a316e92 --- /dev/null +++ b/drivers/crypto/virtio/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio-crypto.o +virtio-crypto-objs := \ + virtio_crypto_algs.o \ + virtio_crypto_mgr.o \ + virtio_crypto.o diff --git a/drivers/crypto/virtio/virtio_crypto.c b/drivers/crypto/virtio/virtio_crypto.c new file mode 100644 index 0000000..56fdfed --- /dev/null +++ b/drivers/crypto/virtio/virtio_crypto.c @@ -0,0 +1,444 @@ + /* Driver for Virtio crypto device. + * + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/virtio_config.h> +#include <linux/cpu.h> + +#include <uapi/linux/virtio_crypto.h> +#include "virtio_crypto_common.h" + + +static void virtcrypto_dataq_callback(struct virtqueue *vq) +{ + struct virtio_crypto *vcrypto = vq->vdev->priv; + struct virtio_crypto_request *vc_req; + unsigned long flags; + unsigned int len; + struct ablkcipher_request *ablk_req; + int error; + + spin_lock_irqsave(&vcrypto->lock, flags); + do { + virtqueue_disable_cb(vq); + while ((vc_req = virtqueue_get_buf(vq, &len)) != NULL) { + if (vc_req->type == VIRTIO_CRYPTO_SYM_OP_CIPHER) { + switch (vc_req->status) { + case VIRTIO_CRYPTO_OK: + error = 0; + break; + case VIRTIO_CRYPTO_INVSESS: + case VIRTIO_CRYPTO_ERR: + error = -EINVAL; + break; + case VIRTIO_CRYPTO_BADMSG: + error = -EBADMSG; + break; + default: + error = -EIO; + break; + } + ablk_req = vc_req->ablkcipher_req; + /* Finish the encrypt or decrypt process */ + ablk_req->base.complete(&ablk_req->base, error); + } + + kfree(vc_req->req_data); + kfree(vc_req->sgs); + } + } while (!virtqueue_enable_cb(vq)); + spin_unlock_irqrestore(&vcrypto->lock, flags); +} + +static int virtcrypto_find_vqs(struct virtio_crypto *vi) +{ + vq_callback_t **callbacks; + struct virtqueue **vqs; + int ret = -ENOMEM; + int i, total_vqs; + const char **names; + + /* We expect 1 data virtqueue, followed by + * possible N-1 data queues used in multiqueue mode, followed by + * control vq. + */ + total_vqs = vi->max_data_queues + 1; + + /* Allocate space for find_vqs parameters */ + vqs = kcalloc(total_vqs, sizeof(*vqs), GFP_KERNEL); + if (!vqs) + goto err_vq; + callbacks = kcalloc(total_vqs, sizeof(*callbacks), GFP_KERNEL); + if (!callbacks) + goto err_callback; + names = kcalloc(total_vqs, sizeof(*names), GFP_KERNEL); + if (!names) + goto err_names; + + /* Parameters for control virtqueue */ + callbacks[total_vqs - 1] = NULL; + names[total_vqs - 1] = "controlq"; + + /* Allocate/initialize parameters for data virtqueues */ + for (i = 0; i < vi->max_data_queues; i++) { + callbacks[i] = virtcrypto_dataq_callback; + snprintf(vi->data_vq[i].name, sizeof(vi->data_vq[i].name), + "dataq.%d", i); + names[i] = vi->data_vq[i].name; + } + + ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks, + names); + if (ret) + goto err_find; + + vi->ctrl_vq = vqs[total_vqs - 1]; + + for (i = 0; i < vi->max_data_queues; i++) + vi->data_vq[i].vq = vqs[i]; + + kfree(names); + kfree(callbacks); + kfree(vqs); + + return 0; + +err_find: + kfree(names); +err_names: + kfree(callbacks); +err_callback: + kfree(vqs); +err_vq: + return ret; +} + +static int virtcrypto_alloc_queues(struct virtio_crypto *vi) +{ + vi->data_vq = kcalloc(vi->max_data_queues, sizeof(*vi->data_vq), + GFP_KERNEL); + if (!vi->data_vq) + return -ENOMEM; + + return 0; +} + +static void virtcrypto_clean_affinity(struct virtio_crypto *vi, long hcpu) +{ + int i; + + if (vi->affinity_hint_set) { + for (i = 0; i < vi->max_data_queues; i++) + virtqueue_set_affinity(vi->data_vq[i].vq, -1); + + vi->affinity_hint_set = false; + } +} + +static void virtcrypto_set_affinity(struct virtio_crypto *vi) +{ + int i; + int cpu; + + /* + * In multiqueue mode, when the number of cpu is equal to the number + * of queue, we let the queue to be private to one cpu by + * setting the affinity hint to eliminate the contention. + */ + if (vi->curr_queue == 1 || + vi->max_data_queues != num_online_cpus()) { + virtcrypto_clean_affinity(vi, -1); + return; + } + + i = 0; + for_each_online_cpu(cpu) { + virtqueue_set_affinity(vi->data_vq[i].vq, cpu); + i++; + } + + vi->affinity_hint_set = true; +} + +static void virtcrypto_free_queues(struct virtio_crypto *vi) +{ + kfree(vi->data_vq); +} + +static int virtcrypto_init_vqs(struct virtio_crypto *vi) +{ + int ret; + + /* Allocate send & receive queues */ + ret = virtcrypto_alloc_queues(vi); + if (ret) + goto err; + + ret = virtcrypto_find_vqs(vi); + if (ret) + goto err_free; + + get_online_cpus(); + virtcrypto_set_affinity(vi); + put_online_cpus(); + + return 0; + +err_free: + virtcrypto_free_queues(vi); +err: + return ret; +} + +static int virtcrypto_update_status(struct virtio_crypto *vcrypto) +{ + __le32 status_le; + u32 status; + int err; + + status_le = virtio_cread32_le(vcrypto->vdev, + offsetof(struct virtio_crypto_config, status)); + status = le32_to_cpu(status_le); + + /* Ignore unknown (future) status bits */ + status &= VIRTIO_CRYPTO_S_HW_READY; + + if (vcrypto->status == status) + return 0; + + vcrypto->status = status; + + if (vcrypto->status & VIRTIO_CRYPTO_S_HW_READY) { + err = virtcrypto_dev_start(vcrypto); + if (err) { + dev_err(&vcrypto->vdev->dev, + "Failed to start virtio crypto device.\n"); + virtcrypto_dev_stop(vcrypto); + return -1; + } + dev_info(&vcrypto->vdev->dev, "Accelerator is ready\n"); + } else { + virtcrypto_dev_stop(vcrypto); + dev_info(&vcrypto->vdev->dev, "Accelerator is not ready\n"); + } + + return 0; +} + +static void virtcrypto_del_vqs(struct virtio_crypto *vcrypto) +{ + struct virtio_device *vdev = vcrypto->vdev; + + virtcrypto_clean_affinity(vcrypto, -1); + + vdev->config->del_vqs(vdev); + + virtcrypto_free_queues(vcrypto); +} + +static int virtcrypto_probe(struct virtio_device *vdev) +{ + int err = -EFAULT; + struct virtio_crypto *vcrypto; + __le32 max_data_queues_le = 0, max_cipher_key_len_le = 0; + __le32 max_auth_key_len_le = 0; + __le64 max_size_le = 0; + + if (!vdev->config->get) { + dev_err(&vdev->dev, "%s failure: config access disabled\n", + __func__); + return -EINVAL; + } + + if (num_possible_nodes() > 1 && dev_to_node(&vdev->dev) < 0) { + /* + * If the accelerator is connected to a node with no memory + * there is no point in using the accelerator since the remote + * memory transaction will be very slow. + */ + dev_err(&vdev->dev, "Invalid NUMA configuration.\n"); + return -EINVAL; + } + + vcrypto = kzalloc_node(sizeof(*vcrypto), GFP_KERNEL, + dev_to_node(&vdev->dev)); + if (!vcrypto) + return -ENOMEM; + + max_data_queues_le = virtio_cread32_le(vdev, + offsetof(struct virtio_crypto_config, max_dataqueues)); + vcrypto->max_data_queues = le32_to_cpu(max_data_queues_le); + if (vcrypto->max_data_queues < 1) + vcrypto->max_data_queues = 1; + + dev_info(&vdev->dev, "max_queues: %u\n", vcrypto->max_data_queues); + + max_cipher_key_len_le = virtio_cread32_le(vdev, + offsetof(struct virtio_crypto_config, max_cipher_key_len)); + max_auth_key_len_le = virtio_cread32_le(vdev, + offsetof(struct virtio_crypto_config, max_auth_key_len)); + max_size_le = virtio_cread64_le(vdev, + offsetof(struct virtio_crypto_config, max_size)); + + /* Add virtio crypto device to global table */ + err = virtcrypto_devmgr_add_dev(vcrypto); + if (err) { + dev_err(&vdev->dev, "Failed to add new virtio crypto device.\n"); + goto free; + } + vcrypto->owner = THIS_MODULE; + vcrypto = vdev->priv = vcrypto; + vcrypto->vdev = vdev; + spin_lock_init(&vcrypto->lock); + spin_lock_init(&vcrypto->ctrl_lock); + + /* Use sigle data queue as default */ + vcrypto->curr_queue = 1; + vcrypto->max_cipher_key_len = le32_to_cpu(max_cipher_key_len_le); + vcrypto->max_auth_key_len = le32_to_cpu(max_auth_key_len_le); + vcrypto->max_size = le64_to_cpu(max_size_le); + + err = virtcrypto_init_vqs(vcrypto); + if (err) { + dev_err(&vdev->dev, "Failed to initialize vqs.\n"); + goto free_dev; + } + virtio_device_ready(vdev); + + err = virtcrypto_update_status(vcrypto); + if (err) { + err = -EFAULT; + goto free_vqs; + } + + return 0; + +free_vqs: + virtcrypto_del_vqs(vcrypto); +free_dev: + virtcrypto_devmgr_rm_dev(vcrypto); +free: + kfree(vcrypto); + return err; +} + +static void virtcrypto_free_unused_reqs(struct virtio_crypto *vcrypto) +{ + struct virtio_crypto_request *vc_req; + int i; + struct virtqueue *vq; + + for (i = 0; i < vcrypto->max_data_queues; i++) { + vq = vcrypto->data_vq[i].vq; + while ((vc_req = virtqueue_detach_unused_buf(vq)) != NULL) { + kfree(vc_req->req_data); + kfree(vc_req->sgs); + } + } +} + +static void virtcrypto_remove(struct virtio_device *vdev) +{ + struct virtio_crypto *vcrypto = vdev->priv; + + dev_info(&vdev->dev, "Start virtcrypto_remove.\n"); + + if (virtcrypto_dev_started(vcrypto)) + virtcrypto_dev_stop(vcrypto); + vdev->config->reset(vdev); + virtcrypto_free_unused_reqs(vcrypto); + virtcrypto_del_vqs(vcrypto); + virtcrypto_devmgr_rm_dev(vcrypto); + kfree(vcrypto); +} + +static void virtcrypto_config_changed(struct virtio_device *vdev) +{ + struct virtio_crypto *vcrypto = vdev->priv; + + virtcrypto_update_status(vcrypto); +} + +#ifdef CONFIG_PM_SLEEP +static int virtcrypto_freeze(struct virtio_device *vdev) +{ + struct virtio_crypto *vcrypto = vdev->priv; + unsigned long flags; + + virtcrypto_free_unused_reqs(vcrypto); + spin_lock_irqsave(&vcrypto->lock, flags); + if (virtcrypto_dev_started(vcrypto)) + virtcrypto_dev_stop(vcrypto); + spin_unlock_irqrestore(&vcrypto->lock, flags); + + virtcrypto_del_vqs(vcrypto); + return 0; +} + +static int virtcrypto_restore(struct virtio_device *vdev) +{ + struct virtio_crypto *vcrypto = vdev->priv; + int err; + + err = virtcrypto_init_vqs(vcrypto); + if (err) + return err; + + virtio_device_ready(vdev); + err = virtcrypto_dev_start(vcrypto); + if (err) { + dev_err(&vdev->dev, "Failed to start virtio crypto device.\n"); + return -EFAULT; + } + + return 0; +} +#endif + + +static unsigned int features[] = { + /* none */ +}; + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_CRYPTO, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_crypto_driver = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .feature_table = features, + .feature_table_size = ARRAY_SIZE(features), + .id_table = id_table, + .probe = virtcrypto_probe, + .remove = virtcrypto_remove, + .config_changed = virtcrypto_config_changed, +#ifdef CONFIG_PM_SLEEP + .freeze = virtcrypto_freeze, + .restore = virtcrypto_restore, +#endif +}; + +module_virtio_driver(virtio_crypto_driver); + +MODULE_DEVICE_TABLE(virtio, id_table); +MODULE_DESCRIPTION("virtio crypto device driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Gonglei <arei.gonglei@huawei.com>"); diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c new file mode 100644 index 0000000..7b57584 --- /dev/null +++ b/drivers/crypto/virtio/virtio_crypto_algs.c @@ -0,0 +1,524 @@ + /* Algorithms supported by virtio crypto device + * + * Authors: Gonglei <arei.gonglei@huawei.com> + * + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/scatterlist.h> +#include <crypto/algapi.h> +#include <linux/err.h> +#include <crypto/scatterwalk.h> +#include <linux/atomic.h> + +#include <uapi/linux/virtio_crypto.h> +#include "virtio_crypto_common.h" + +static DEFINE_MUTEX(algs_lock); +static unsigned int virtio_crypto_active_devs; + +static u64 virtio_crypto_alg_sg_nents_length(struct scatterlist *sg) +{ + u64 total = 0; + + for (total = 0; sg; sg = sg_next(sg)) + total += sg->length; + + return total; +} + +static int virtio_crypto_alg_validate_key(int key_len, int *alg) +{ + switch (key_len) { + case AES_KEYSIZE_128: + case AES_KEYSIZE_192: + case AES_KEYSIZE_256: + *alg = VIRTIO_CRYPTO_CIPHER_AES_CBC; + break; + default: + return -EINVAL; + } + return 0; +} + +static int virtio_crypto_alg_ablkcipher_init_session( + struct virtio_crypto_ablkcipher_ctx *ctx, + int alg, const uint8_t *key, + unsigned int keylen, + int encrypt) +{ + struct scatterlist outhdr, key_sg, inhdr, *sgs[3]; + unsigned int tmp; + struct virtio_crypto *vcrypto = ctx->vcrypto; + int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : VIRTIO_CRYPTO_OP_DECRYPT; + int err; + unsigned int num_out = 0, num_in = 0; + + /* + * Avoid to do DMA from the stack, switch to using + * dynamically-allocated for the key + */ + uint8_t *cipher_key = kmalloc(keylen, GFP_ATOMIC); + + if (!cipher_key) + return -ENOMEM; + + memcpy(cipher_key, key, keylen); + + spin_lock(&vcrypto->ctrl_lock); + /* Pad ctrl header */ + vcrypto->ctrl.header.opcode = + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); + vcrypto->ctrl.header.algo = cpu_to_le32((uint32_t)alg); + /* Set the default dataqueue id to 0 */ + vcrypto->ctrl.header.queue_id = 0; + + vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); + /* Pad cipher's parameters */ + vcrypto->ctrl.u.sym_create_session.op_type = + cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); + vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = + vcrypto->ctrl.header.algo; + vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = + cpu_to_le32(keylen); + vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = + cpu_to_le32(op); + + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sgs[num_out++] = &outhdr; + + /* Set key */ + sg_init_one(&key_sg, cipher_key, keylen); + sgs[num_out++] = &key_sg; + + /* Return status and session id back */ + sg_init_one(&inhdr, &vcrypto->input, sizeof(vcrypto->input)); + sgs[num_out + num_in++] = &inhdr; + + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, + num_in, vcrypto, GFP_ATOMIC); + if (err < 0) { + spin_unlock(&vcrypto->ctrl_lock); + kfree(cipher_key); + return err; + } + virtqueue_kick(vcrypto->ctrl_vq); + + /* + * Spin for a response, the kick causes an ioport write, trapping + * into the hypervisor, so the request should be handled immediately. + */ + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && + !virtqueue_is_broken(vcrypto->ctrl_vq)) + cpu_relax(); + + if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { + spin_unlock(&vcrypto->ctrl_lock); + pr_err("virtio_crypto: Create session failed status: %u\n", + le32_to_cpu(vcrypto->input.status)); + kfree(cipher_key); + return -EINVAL; + } + spin_unlock(&vcrypto->ctrl_lock); + + spin_lock(&ctx->lock); + if (encrypt) + ctx->enc_sess_info.session_id = + le64_to_cpu(vcrypto->input.session_id); + else + ctx->dec_sess_info.session_id = + le64_to_cpu(vcrypto->input.session_id); + spin_unlock(&ctx->lock); + + kfree(cipher_key); + return 0; +} + +static int virtio_crypto_alg_ablkcipher_close_session( + struct virtio_crypto_ablkcipher_ctx *ctx, + int encrypt) +{ + struct scatterlist outhdr, status_sg, *sgs[2]; + unsigned int tmp; + struct virtio_crypto_destroy_session_req *destroy_session; + struct virtio_crypto *vcrypto = ctx->vcrypto; + int err; + unsigned int num_out = 0, num_in = 0; + + spin_lock(&vcrypto->ctrl_lock); + vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; + /* Pad ctrl header */ + vcrypto->ctrl.header.opcode = + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); + /* Set the default virtqueue id to 0 */ + vcrypto->ctrl.header.queue_id = 0; + + destroy_session = &vcrypto->ctrl.u.destroy_session; + + if (encrypt) + destroy_session->session_id = + cpu_to_le64(ctx->enc_sess_info.session_id); + else + destroy_session->session_id = + cpu_to_le64(ctx->dec_sess_info.session_id); + + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sgs[num_out++] = &outhdr; + + /* Return status and session id back */ + sg_init_one(&status_sg, &vcrypto->ctrl_status.status, + sizeof(vcrypto->ctrl_status.status)); + sgs[num_out + num_in++] = &status_sg; + + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, + num_in, vcrypto, GFP_ATOMIC); + if (err < 0) { + spin_unlock(&vcrypto->ctrl_lock); + return err; + } + virtqueue_kick(vcrypto->ctrl_vq); + + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && + !virtqueue_is_broken(vcrypto->ctrl_vq)) + cpu_relax(); + + if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { + spin_unlock(&vcrypto->ctrl_lock); + pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", + vcrypto->ctrl_status.status, + destroy_session->session_id); + + return -EINVAL; + } + spin_unlock(&vcrypto->ctrl_lock); + + return 0; +} + +static int virtio_crypto_alg_ablkcipher_init_sessions( + struct virtio_crypto_ablkcipher_ctx *ctx, + const uint8_t *key, unsigned int keylen) +{ + int alg; + int ret; + struct virtio_crypto *vcrypto = ctx->vcrypto; + + if (keylen > vcrypto->max_cipher_key_len) { + pr_err("virtio_crypto: the key is too long\n"); + goto bad_key; + } + + if (virtio_crypto_alg_validate_key(keylen, &alg)) + goto bad_key; + + /* Create encryption session */ + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, + alg, key, keylen, 1); + if (ret) + return ret; + /* Create decryption session */ + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, + alg, key, keylen, 0); + if (ret) { + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); + return ret; + } + return 0; + +bad_key: + crypto_tfm_set_flags(ctx->tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; +} + +/* Note: kernel crypto API realization */ +static int virtio_crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm, + const uint8_t *key, + unsigned int keylen) +{ + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(tfm); + int ret; + + spin_lock(&ctx->lock); + + if (!ctx->vcrypto) { + /* New key */ + int node = virtio_crypto_get_current_node(); + struct virtio_crypto *vcrypto = + virtcrypto_get_dev_node(node); + if (!vcrypto) { + vcrypto = virtcrypto_devmgr_get_first(); + if (!vcrypto) { + pr_err("virtio_crypto: Could not find a virtio device in the system"); + spin_unlock(&ctx->lock); + return -ENODEV; + } + } + + ctx->vcrypto = vcrypto; + } + spin_unlock(&ctx->lock); + + ret = virtio_crypto_alg_ablkcipher_init_sessions(ctx, key, keylen); + if (ret) { + virtcrypto_dev_put(ctx->vcrypto); + ctx->vcrypto = NULL; + + return ret; + } + + return 0; +} + +static int +__virtio_crypto_ablkcipher_do_req(struct virtio_crypto_request *vc_req, + struct ablkcipher_request *req, + struct data_queue *data_vq, + __u8 op) +{ + struct virtio_crypto_ablkcipher_ctx *ctx = vc_req->ablkcipher_ctx; + struct virtio_crypto *vcrypto = ctx->vcrypto; + struct virtio_crypto_op_data_req *req_data; + int src_nents, dst_nents; + int err; + unsigned long flags; + struct scatterlist outhdr, iv_sg, status_sg, **sgs; + int i; + u64 dst_len; + unsigned int num_out = 0, num_in = 0; + int sg_total; + + src_nents = sg_nents_for_len(req->src, req->nbytes); + dst_nents = sg_nents(req->dst); + + pr_debug("virtio_crypto: Number of sgs (src_nents: %d, dst_nents: %d)\n", + src_nents, dst_nents); + + /* Why 3? outhdr + iv + inhdr */ + sg_total = src_nents + dst_nents + 3; + sgs = kzalloc_node(sg_total * sizeof(*sgs), GFP_ATOMIC, + dev_to_node(&vcrypto->vdev->dev)); + if (!sgs) + return -ENOMEM; + + req_data = kzalloc_node(sizeof(*req_data), GFP_ATOMIC, + dev_to_node(&vcrypto->vdev->dev)); + if (!req_data) { + kfree(sgs); + return -ENOMEM; + } + + vc_req->req_data = req_data; + vc_req->type = VIRTIO_CRYPTO_SYM_OP_CIPHER; + /* Head of operation */ + if (op) { + req_data->header.session_id = + cpu_to_le64(ctx->enc_sess_info.session_id); + req_data->header.opcode = + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_ENCRYPT); + } else { + req_data->header.session_id = + cpu_to_le64(ctx->dec_sess_info.session_id); + req_data->header.opcode = + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DECRYPT); + } + req_data->u.sym_req.op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); + req_data->u.sym_req.u.cipher.para.iv_len = cpu_to_le32(AES_BLOCK_SIZE); + req_data->u.sym_req.u.cipher.para.src_data_len = + cpu_to_le32(req->nbytes); + + dst_len = virtio_crypto_alg_sg_nents_length(req->dst); + if (unlikely(dst_len > U32_MAX)) { + pr_err("virtio_crypto: The dst_len is beyond U32_MAX\n"); + err = -EINVAL; + goto free; + } + + pr_debug("virtio_crypto: src_len: %u, dst_len: %llu\n", + req->nbytes, dst_len); + + if (unlikely(req->nbytes + dst_len + AES_BLOCK_SIZE + + sizeof(vc_req->status) > vcrypto->max_size)) { + pr_err("virtio_crypto: The length is too big\n"); + err = -EINVAL; + goto free; + } + + req_data->u.sym_req.u.cipher.para.dst_data_len = + cpu_to_le32((uint32_t)dst_len); + + /* Outhdr */ + sg_init_one(&outhdr, req_data, sizeof(*req_data)); + sgs[num_out++] = &outhdr; + + /* IV */ + sg_init_one(&iv_sg, req->info, AES_BLOCK_SIZE); + sgs[num_out++] = &iv_sg; + + /* Source data */ + for (i = 0; i < src_nents; i++) + sgs[num_out++] = &req->src[i]; + + /* Destination data */ + for (i = 0; i < dst_nents; i++) + sgs[num_out + num_in++] = &req->dst[i]; + + /* Status */ + sg_init_one(&status_sg, &vc_req->status, sizeof(vc_req->status)); + sgs[num_out + num_in++] = &status_sg; + + vc_req->sgs = sgs; + + spin_lock_irqsave(&vcrypto->lock, flags); + err = virtqueue_add_sgs(data_vq->vq, sgs, num_out, + num_in, vc_req, GFP_ATOMIC); + spin_unlock_irqrestore(&vcrypto->lock, flags); + if (unlikely(err < 0)) + goto free; + + return 0; + +free: + kfree(req_data); + kfree(sgs); + return err; +} + +static int virtio_crypto_ablkcipher_encrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); + struct virtio_crypto *vcrypto = ctx->vcrypto; + int ret; + /* Use the first data virtqueue as default */ + struct data_queue *data_vq = &vcrypto->data_vq[0]; + + vc_req->ablkcipher_ctx = ctx; + vc_req->ablkcipher_req = req; + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 1); + if (ret < 0) { + pr_err("virtio_crypto: Encryption failed!\n"); + return ret; + } + virtqueue_kick(data_vq->vq); + + return -EINPROGRESS; +} + +static int virtio_crypto_ablkcipher_decrypt(struct ablkcipher_request *req) +{ + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); + struct virtio_crypto *vcrypto = ctx->vcrypto; + int ret; + /* Use the first data virtqueue as default */ + struct data_queue *data_vq = &vcrypto->data_vq[0]; + + vc_req->ablkcipher_ctx = ctx; + vc_req->ablkcipher_req = req; + + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 0); + if (ret < 0) { + pr_err("virtio_crypto: Decryption failed!\n"); + return ret; + } + virtqueue_kick(data_vq->vq); + + return -EINPROGRESS; +} + +static int virtio_crypto_ablkcipher_init(struct crypto_tfm *tfm) +{ + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); + + spin_lock_init(&ctx->lock); + tfm->crt_ablkcipher.reqsize = sizeof(struct virtio_crypto_request); + ctx->tfm = tfm; + + return 0; +} + +static void virtio_crypto_ablkcipher_exit(struct crypto_tfm *tfm) +{ + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); + + if (!ctx->vcrypto) + return; + + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); + virtio_crypto_alg_ablkcipher_close_session(ctx, 0); + virtcrypto_dev_put(ctx->vcrypto); + ctx->vcrypto = NULL; +} + +static struct crypto_alg virtio_crypto_algs[] = { { + .cra_name = "cbc(aes)", + .cra_driver_name = "virtio_crypto_aes_cbc", + .cra_priority = 4001, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct virtio_crypto_ablkcipher_ctx), + .cra_alignmask = 0, + .cra_module = THIS_MODULE, + .cra_type = &crypto_ablkcipher_type, + .cra_init = virtio_crypto_ablkcipher_init, + .cra_exit = virtio_crypto_ablkcipher_exit, + .cra_u = { + .ablkcipher = { + .setkey = virtio_crypto_ablkcipher_setkey, + .decrypt = virtio_crypto_ablkcipher_decrypt, + .encrypt = virtio_crypto_ablkcipher_encrypt, + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + }, + }, +} }; + +int virtio_crypto_algs_register(void) +{ + int ret = 0, i; + + mutex_lock(&algs_lock); + if (++virtio_crypto_active_devs != 1) + goto unlock; + + for (i = 0; i < ARRAY_SIZE(virtio_crypto_algs); i++) { + virtio_crypto_algs[i].cra_flags = + CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC; + } + + ret = crypto_register_algs(virtio_crypto_algs, + ARRAY_SIZE(virtio_crypto_algs)); + +unlock: + mutex_unlock(&algs_lock); + return ret; +} + +void virtio_crypto_algs_unregister(void) +{ + mutex_lock(&algs_lock); + if (--virtio_crypto_active_devs != 0) + goto unlock; + + crypto_unregister_algs(virtio_crypto_algs, + ARRAY_SIZE(virtio_crypto_algs)); + +unlock: + mutex_unlock(&algs_lock); +} diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h new file mode 100644 index 0000000..a599733 --- /dev/null +++ b/drivers/crypto/virtio/virtio_crypto_common.h @@ -0,0 +1,124 @@ +/* Common header for Virtio crypto device. + * + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _VIRITO_CRYPTO_COMMON_H +#define _VIRITO_CRYPTO_COMMON_H + +#include <linux/virtio.h> +#include <linux/crypto.h> +#include <linux/spinlock.h> +#include <crypto/aead.h> +#include <crypto/aes.h> +#include <crypto/authenc.h> + + +/* Internal representation of a data virtqueue */ +struct data_queue { + /* Virtqueue associated with this send _queue */ + struct virtqueue *vq; + + /* Name of the tx queue: dataq.$index */ + char name[32]; +}; + +struct virtio_crypto { + struct virtio_device *vdev; + struct virtqueue *ctrl_vq; + struct data_queue *data_vq; + + /* To protect the vq operations for the dataq */ + spinlock_t lock; + + /* To protect the vq operations for the controlq */ + spinlock_t ctrl_lock; + + /* Maximum of data queues supported by the device */ + u32 max_data_queues; + + /* Number of queue currently used by the driver */ + u32 curr_queue; + + /* Maximum length of cipher key */ + u32 max_cipher_key_len; + /* Maximum length of authenticated key */ + u32 max_auth_key_len; + /* Maximum size of per request */ + u64 max_size; + + /* Control VQ buffers: protected by the ctrl_lock */ + struct virtio_crypto_op_ctrl_req ctrl; + struct virtio_crypto_session_input input; + struct virtio_crypto_inhdr ctrl_status; + + unsigned long status; + atomic_t ref_count; + struct list_head list; + struct module *owner; + uint8_t dev_id; + + /* Does the affinity hint is set for virtqueues? */ + bool affinity_hint_set; +}; + +struct virtio_crypto_sym_session_info { + /* Backend session id, which come from the host side */ + __u64 session_id; +}; + +struct virtio_crypto_ablkcipher_ctx { + struct virtio_crypto *vcrypto; + struct crypto_tfm *tfm; + + struct virtio_crypto_sym_session_info enc_sess_info; + struct virtio_crypto_sym_session_info dec_sess_info; + + /* Protects virtio_crypto_ablkcipher_ctx struct */ + spinlock_t lock; +}; + +struct virtio_crypto_request { + /* Cipher or aead */ + uint32_t type; + uint8_t status; + struct virtio_crypto_ablkcipher_ctx *ablkcipher_ctx; + struct ablkcipher_request *ablkcipher_req; + struct virtio_crypto_op_data_req *req_data; + struct scatterlist **sgs; +}; + +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev); +struct list_head *virtcrypto_devmgr_get_head(void); +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev); +struct virtio_crypto *virtcrypto_devmgr_get_first(void); +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev); +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev); +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev); +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev); +struct virtio_crypto *virtcrypto_get_dev_node(int node); +int virtcrypto_dev_start(struct virtio_crypto *vcrypto); +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto); + +static inline int virtio_crypto_get_current_node(void) +{ + return topology_physical_package_id(smp_processor_id()); +} + +int virtio_crypto_algs_register(void); +void virtio_crypto_algs_unregister(void); + +#endif /* _VIRITO_CRYPTO_COMMON_H */ diff --git a/drivers/crypto/virtio/virtio_crypto_mgr.c b/drivers/crypto/virtio/virtio_crypto_mgr.c new file mode 100644 index 0000000..5b7260c --- /dev/null +++ b/drivers/crypto/virtio/virtio_crypto_mgr.c @@ -0,0 +1,258 @@ + /* Management for virtio crypto devices (refer to adf_dev_mgr.c) + * + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/module.h> + +#include <uapi/linux/virtio_crypto.h> +#include "virtio_crypto_common.h" + +static LIST_HEAD(virtio_crypto_table); +static DEFINE_MUTEX(table_lock); +static uint32_t num_devices; + +#define VIRTIO_CRYPTO_MAX_DEVICES 32 + + +/* + * virtcrypto_devmgr_add_dev() - Add vcrypto_dev to the acceleration + * framework. + * @vcrypto_dev: Pointer to virtio crypto device. + * + * Function adds virtio crypto device to the global list. + * To be used by virtio crypto device specific drivers. + * + * Return: 0 on success, error code othewise. + */ +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev) +{ + struct list_head *itr; + + if (num_devices == VIRTIO_CRYPTO_MAX_DEVICES) { + pr_info("virtio_crypto: only support up to %d devices\n", + VIRTIO_CRYPTO_MAX_DEVICES); + return -EFAULT; + } + + mutex_lock(&table_lock); + list_for_each(itr, &virtio_crypto_table) { + struct virtio_crypto *ptr = + list_entry(itr, struct virtio_crypto, list); + + if (ptr == vcrypto_dev) { + mutex_unlock(&table_lock); + return -EEXIST; + } + } + atomic_set(&vcrypto_dev->ref_count, 0); + list_add_tail(&vcrypto_dev->list, &virtio_crypto_table); + vcrypto_dev->dev_id = num_devices++; + mutex_unlock(&table_lock); + return 0; +} + +struct list_head *virtcrypto_devmgr_get_head(void) +{ + return &virtio_crypto_table; +} + +/* + * virtcrypto_devmgr_rm_dev() - Remove vcrypto_dev from the acceleration + * framework. + * @vcrypto_dev: Pointer to virtio crypto device. + * + * Function removes virtio crypto device from the acceleration framework. + * To be used by virtio crypto device specific drivers. + * + * Return: void + */ +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev) +{ + mutex_lock(&table_lock); + list_del(&vcrypto_dev->list); + num_devices--; + mutex_unlock(&table_lock); +} + +/* + * virtcrypto_devmgr_get_first() + * + * Function returns the first virtio crypto device from the acceleration + * framework. + * + * To be used by virtio crypto device specific drivers. + * + * Return: pointer to vcrypto_dev or NULL if not found. + */ +struct virtio_crypto *virtcrypto_devmgr_get_first(void) +{ + struct virtio_crypto *dev = NULL; + + if (!list_empty(&virtio_crypto_table)) + dev = list_first_entry(&virtio_crypto_table, + struct virtio_crypto, + list); + return dev; +} + +/* + * virtcrypto_dev_in_use() - Check whether vcrypto_dev is currently in use + * @vcrypto_dev: Pointer to virtio crypto device. + * + * To be used by virtio crypto device specific drivers. + * + * Return: 1 when device is in use, 0 otherwise. + */ +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev) +{ + return atomic_read(&vcrypto_dev->ref_count) != 0; +} + +/* + * virtcrypto_dev_get() - Increment vcrypto_dev reference count + * @vcrypto_dev: Pointer to virtio crypto device. + * + * Increment the vcrypto_dev refcount and if this is the first time + * incrementing it during this period the vcrypto_dev is in use, + * increment the module refcount too. + * To be used by virtio crypto device specific drivers. + * + * Return: 0 when successful, EFAULT when fail to bump module refcount + */ +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev) +{ + if (atomic_add_return(1, &vcrypto_dev->ref_count) == 1) + if (!try_module_get(vcrypto_dev->owner)) + return -EFAULT; + return 0; +} + +/* + * virtcrypto_dev_put() - Decrement vcrypto_dev reference count + * @vcrypto_dev: Pointer to virtio crypto device. + * + * Decrement the vcrypto_dev refcount and if this is the last time + * decrementing it during this period the vcrypto_dev is in use, + * decrement the module refcount too. + * To be used by virtio crypto device specific drivers. + * + * Return: void + */ +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev) +{ + if (atomic_sub_return(1, &vcrypto_dev->ref_count) == 0) + module_put(vcrypto_dev->owner); +} + +/* + * virtcrypto_dev_started() - Check whether device has started + * @vcrypto_dev: Pointer to virtio crypto device. + * + * To be used by virtio crypto device specific drivers. + * + * Return: 1 when the device has started, 0 otherwise + */ +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev) +{ + return (vcrypto_dev->status & VIRTIO_CRYPTO_S_HW_READY); +} + +/* + * virtcrypto_get_dev_node() - Get vcrypto_dev on the node. + * @node: Node id the driver works. + * + * Function returns the virtio crypto device used fewest on the node. + * + * To be used by virtio crypto device specific drivers. + * + * Return: pointer to vcrypto_dev or NULL if not found. + */ +struct virtio_crypto *virtcrypto_get_dev_node(int node) +{ + struct virtio_crypto *vcrypto_dev = NULL, *tmp_dev; + unsigned long best = ~0; + unsigned long ctr; + + list_for_each_entry(tmp_dev, virtcrypto_devmgr_get_head(), list) { + + if ((node == dev_to_node(&tmp_dev->vdev->dev) || + dev_to_node(&tmp_dev->vdev->dev) < 0) && + virtcrypto_dev_started(tmp_dev)) { + ctr = atomic_read(&tmp_dev->ref_count); + if (best > ctr) { + vcrypto_dev = tmp_dev; + best = ctr; + } + } + } + + if (!vcrypto_dev) { + pr_info("virtio_crypto: Could not find a device on node %d\n", + node); + /* Get any started device */ + list_for_each_entry(tmp_dev, + virtcrypto_devmgr_get_head(), list) { + if (virtcrypto_dev_started(tmp_dev)) { + vcrypto_dev = tmp_dev; + break; + } + } + } + + if (!vcrypto_dev) + return NULL; + + virtcrypto_dev_get(vcrypto_dev); + return vcrypto_dev; +} + +/* + * virtcrypto_dev_start() - Start virtio crypto device + * @vcrypto: Pointer to virtio crypto device. + * + * Function notifies all the registered services that the virtio crypto device + * is ready to be used. + * To be used by virtio crypto device specific drivers. + * + * Return: 0 on success, EFAULT when fail to register algorithms + */ +int virtcrypto_dev_start(struct virtio_crypto *vcrypto) +{ + if (virtio_crypto_algs_register()) { + pr_err("virtio_crypto: Failed to register crypto algs\n"); + return -EFAULT; + } + + return 0; +} + +/* + * virtcrypto_dev_stop() - Stop virtio crypto device + * @vcrypto: Pointer to virtio crypto device. + * + * Function notifies all the registered services that the virtio crypto device + * is ready to be used. + * To be used by virtio crypto device specific drivers. + * + * Return: void + */ +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto) +{ + virtio_crypto_algs_unregister(); +} diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index cd2be1c..4bdb84c 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -460,6 +460,7 @@ header-y += virtio_rng.h header-y += virtio_scsi.h header-y += virtio_types.h header-y += virtio_vsock.h +header-y += virtio_crypto.h header-y += vm_sockets.h header-y += vt.h header-y += vtpm_proxy.h diff --git a/include/uapi/linux/virtio_crypto.h b/include/uapi/linux/virtio_crypto.h new file mode 100644 index 0000000..abc2cf5 --- /dev/null +++ b/include/uapi/linux/virtio_crypto.h @@ -0,0 +1,435 @@ +#ifndef _VIRTIO_CRYPTO_H +#define _VIRTIO_CRYPTO_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ +#include <linux/types.h> +#include <linux/virtio_types.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_config.h> + + +#define VIRTIO_CRYPTO_SERVICE_CIPHER 0 +#define VIRTIO_CRYPTO_SERVICE_HASH 1 +#define VIRTIO_CRYPTO_SERVICE_MAC 2 +#define VIRTIO_CRYPTO_SERVICE_AEAD 3 + +#define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op)) + +struct virtio_crypto_ctrl_header { +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02) +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03) +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02) +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03) +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02) +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03) +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) + __le32 opcode; + __le32 algo; + __le32 flag; + /* data virtqueue id */ + __le32 queue_id; +}; + +struct virtio_crypto_cipher_session_para { +#define VIRTIO_CRYPTO_NO_CIPHER 0 +#define VIRTIO_CRYPTO_CIPHER_ARC4 1 +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2 +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3 +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4 +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5 +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6 +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7 +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8 +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9 +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10 +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11 +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12 +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13 +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14 + __le32 algo; + /* length of key */ + __le32 keylen; + +#define VIRTIO_CRYPTO_OP_ENCRYPT 1 +#define VIRTIO_CRYPTO_OP_DECRYPT 2 + /* encrypt or decrypt */ + __le32 op; + __le32 padding; +}; + +struct virtio_crypto_session_input { + /* Device-writable part */ + __le64 session_id; + __le32 status; + __le32 padding; +}; + +struct virtio_crypto_cipher_session_req { + struct virtio_crypto_cipher_session_para para; +}; + +struct virtio_crypto_hash_session_para { +#define VIRTIO_CRYPTO_NO_HASH 0 +#define VIRTIO_CRYPTO_HASH_MD5 1 +#define VIRTIO_CRYPTO_HASH_SHA1 2 +#define VIRTIO_CRYPTO_HASH_SHA_224 3 +#define VIRTIO_CRYPTO_HASH_SHA_256 4 +#define VIRTIO_CRYPTO_HASH_SHA_384 5 +#define VIRTIO_CRYPTO_HASH_SHA_512 6 +#define VIRTIO_CRYPTO_HASH_SHA3_224 7 +#define VIRTIO_CRYPTO_HASH_SHA3_256 8 +#define VIRTIO_CRYPTO_HASH_SHA3_384 9 +#define VIRTIO_CRYPTO_HASH_SHA3_512 10 +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11 +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12 + __le32 algo; + /* hash result length */ + __le32 hash_result_len; +}; + +struct virtio_crypto_hash_create_session_req { + struct virtio_crypto_hash_session_para para; +}; + +struct virtio_crypto_mac_session_para { +#define VIRTIO_CRYPTO_NO_MAC 0 +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1 +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2 +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3 +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4 +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5 +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6 +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25 +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26 +#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27 +#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28 +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41 +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42 +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49 +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50 +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53 + __le32 algo; + /* hash result length */ + __le32 hash_result_len; + /* length of authenticated key */ + __le32 auth_key_len; + __le32 padding; +}; + +struct virtio_crypto_mac_create_session_req { + struct virtio_crypto_mac_session_para para; +}; + +struct virtio_crypto_aead_session_para { +#define VIRTIO_CRYPTO_NO_AEAD 0 +#define VIRTIO_CRYPTO_AEAD_GCM 1 +#define VIRTIO_CRYPTO_AEAD_CCM 2 +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3 + __le32 algo; + /* length of key */ + __le32 key_len; + /* hash result length */ + __le32 hash_result_len; + /* length of the additional authenticated data (AAD) in bytes */ + __le32 aad_len; + /* encrypt or decrypt, See above VIRTIO_CRYPTO_OP_* */ + __le32 op; + __le32 padding; +}; + +struct virtio_crypto_aead_create_session_req { + struct virtio_crypto_aead_session_para para; +}; + +struct virtio_crypto_alg_chain_session_para { +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1 +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2 + __le32 alg_chain_order; +/* Plain hash */ +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1 +/* Authenticated hash (mac) */ +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2 +/* Nested hash */ +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3 + __le32 hash_mode; + struct virtio_crypto_cipher_session_para cipher_param; + union { + struct virtio_crypto_hash_session_para hash_param; + struct virtio_crypto_mac_session_para mac_param; + } u; + /* length of the additional authenticated data (AAD) in bytes */ + __le32 aad_len; + __le32 padding; +}; + +struct virtio_crypto_alg_chain_session_req { + struct virtio_crypto_alg_chain_session_para para; +}; + +struct virtio_crypto_sym_create_session_req { + union { + struct virtio_crypto_cipher_session_req cipher; + struct virtio_crypto_alg_chain_session_req chain; + } u; + + /* Device-readable part */ + +/* No operation */ +#define VIRTIO_CRYPTO_SYM_OP_NONE 0 +/* Cipher only operation on the data */ +#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1 +/* + * Chain any cipher with any hash or mac operation. The order + * depends on the value of alg_chain_order param + */ +#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2 + __le32 op_type; + __le32 padding; +}; + +struct virtio_crypto_destroy_session_req { + /* Device-readable part */ + __le64 session_id; +}; + +/* The request of the control viritqueue's packet */ +struct virtio_crypto_op_ctrl_req { + struct virtio_crypto_ctrl_header header; + + union { + struct virtio_crypto_sym_create_session_req + sym_create_session; + struct virtio_crypto_hash_create_session_req + hash_create_session; + struct virtio_crypto_mac_create_session_req + mac_create_session; + struct virtio_crypto_aead_create_session_req + aead_create_session; + struct virtio_crypto_destroy_session_req + destroy_session; + } u; +}; + +struct virtio_crypto_op_header { +#define VIRTIO_CRYPTO_CIPHER_ENCRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00) +#define VIRTIO_CRYPTO_CIPHER_DECRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01) +#define VIRTIO_CRYPTO_HASH \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00) +#define VIRTIO_CRYPTO_MAC \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00) +#define VIRTIO_CRYPTO_AEAD_ENCRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) +#define VIRTIO_CRYPTO_AEAD_DECRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) + __le32 opcode; + /* algo should be service-specific algorithms */ + __le32 algo; + /* session_id should be service-specific algorithms */ + __le64 session_id; + /* control flag to control the request */ + __le32 flag; + __le32 padding; +}; + +struct virtio_crypto_cipher_para { + /* + * Byte Length of valid IV/Counter + * + * For block ciphers in CBC or F8 mode, or for Kasumi in F8 mode, or for + * SNOW3G in UEA2 mode, this is the length of the IV (which + * must be the same as the block length of the cipher). + * For block ciphers in CTR mode, this is the length of the counter + * (which must be the same as the block length of the cipher). + * For AES-XTS, this is the 128bit tweak, i, from IEEE Std 1619-2007. + * + * The IV/Counter will be updated after every partial cryptographic + * operation. + */ + __le32 iv_len; + /* length of source data */ + __le32 src_data_len; + /* length of dst data */ + __le32 dst_data_len; + __le32 padding; +}; + +struct virtio_crypto_hash_para { + /* length of source data */ + __le32 src_data_len; + /* hash result length */ + __le32 hash_result_len; +}; + +struct virtio_crypto_mac_para { + struct virtio_crypto_hash_para hash; +}; + +struct virtio_crypto_aead_para { + /* + * Byte Length of valid IV data pointed to by the below iv_addr + * parameter. + * + * For GCM mode, this is either 12 (for 96-bit IVs) or 16, in which + * case iv_addr points to J0. + * For CCM mode, this is the length of the nonce, which can be in the + * range 7 to 13 inclusive. + */ + __le32 iv_len; + /* length of additional auth data */ + __le32 aad_len; + /* length of source data */ + __le32 src_data_len; + /* length of dst data */ + __le32 dst_data_len; +}; + +struct virtio_crypto_cipher_data_req { + /* Device-readable part */ + struct virtio_crypto_cipher_para para; +}; + +struct virtio_crypto_hash_data_req { + /* Device-readable part */ + struct virtio_crypto_hash_para para; +}; + +struct virtio_crypto_mac_data_req { + /* Device-readable part */ + struct virtio_crypto_mac_para para; +}; + +struct virtio_crypto_alg_chain_data_para { + __le32 iv_len; + /* Length of source data */ + __le32 src_data_len; + /* Length of destination data */ + __le32 dst_data_len; + /* Starting point for cipher processing in source data */ + __le32 cipher_start_src_offset; + /* Length of the source data that the cipher will be computed on */ + __le32 len_to_cipher; + /* Starting point for hash processing in source data */ + __le32 hash_start_src_offset; + /* Length of the source data that the hash will be computed on */ + __le32 len_to_hash; + /* Length of the additional auth data */ + __le32 aad_len; + /* Length of the hash result */ + __le32 hash_result_len; + __le32 reserved; +}; + +struct virtio_crypto_alg_chain_data_req { + /* Device-readable part */ + struct virtio_crypto_alg_chain_data_para para; +}; + +struct virtio_crypto_sym_data_req { + union { + struct virtio_crypto_cipher_data_req cipher; + struct virtio_crypto_alg_chain_data_req chain; + } u; + + /* See above VIRTIO_CRYPTO_SYM_OP_* */ + __le32 op_type; + __le32 padding; +}; + +struct virtio_crypto_aead_data_req { + /* Device-readable part */ + struct virtio_crypto_aead_para para; +}; + +/* The request of the data viritqueue's packet */ +struct virtio_crypto_op_data_req { + struct virtio_crypto_op_header header; + + union { + struct virtio_crypto_sym_data_req sym_req; + struct virtio_crypto_hash_data_req hash_req; + struct virtio_crypto_mac_data_req mac_req; + struct virtio_crypto_aead_data_req aead_req; + } u; +}; + +#define VIRTIO_CRYPTO_OK 0 +#define VIRTIO_CRYPTO_ERR 1 +#define VIRTIO_CRYPTO_BADMSG 2 +#define VIRTIO_CRYPTO_NOTSUPP 3 +#define VIRTIO_CRYPTO_INVSESS 4 /* Invaild session id */ + +/* The accelerator hardware is ready */ +#define VIRTIO_CRYPTO_S_HW_READY (1 << 0) + +struct virtio_crypto_config { + /* See VIRTIO_CRYPTO_OP_* above */ + __le32 status; + + /* + * Maximum number of data queue legal values are between 1 and 0x8000 + */ + __le32 max_dataqueues; + + /* + * Specifies the services mask which the devcie support, + * see VIRTIO_CRYPTO_SERVICE_* above + */ + __le32 crypto_services; + + /* Detailed algorithms mask */ + __le32 cipher_algo_l; + __le32 cipher_algo_h; + __le32 hash_algo; + __le32 mac_algo_l; + __le32 mac_algo_h; + __le32 aead_algo; + /* Maximum length of cipher key */ + __le32 max_cipher_key_len; + /* Maximum length of authenticated key */ + __le32 max_auth_key_len; + __le32 reserve; + /* Maximum size of each crypto request's content */ + __le64 max_size; +}; + +struct virtio_crypto_inhdr { + /* See VIRTIO_CRYPTO_* above */ + __u8 status; +}; +#endif diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index 3228d58..6d5c3b2 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -42,5 +42,6 @@ #define VIRTIO_ID_GPU 16 /* virtio GPU */ #define VIRTIO_ID_INPUT 18 /* virtio input */ #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ +#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ #endif /* _LINUX_VIRTIO_IDS_H */ -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* RE: [PATCH v2 0/2] virtio-crypto: add Linux driver [not found] <1479802223-121104-1-git-send-email-arei.gonglei@huawei.com> 2016-11-22 8:10 ` [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family Gonglei 2016-11-22 8:10 ` [PATCH v2 2/2] crypto: add virtio-crypto driver Gonglei @ 2016-11-26 9:38 ` Gonglei (Arei) [not found] ` <1479802223-121104-3-git-send-email-arei.gonglei@huawei.com> [not found] ` <1479802223-121104-2-git-send-email-arei.gonglei@huawei.com> 4 siblings, 0 replies; 13+ messages in thread From: Gonglei (Arei) @ 2016-11-26 9:38 UTC (permalink / raw) To: Gonglei (Arei), linux-kernel@vger.kernel.org, qemu-devel@nongnu.org, virtio-dev@lists.oasis-open.org, virtualization@lists.linux-foundation.org, linux-crypto@vger.kernel.org Cc: Huangweidong (C), Claudio Fontana, mst@redhat.com, Luonengjun, Hanweidong (Randy), Xuquan (Quan Xu), salvatore.benedetto@intel.com, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H), herbert@gondor.apana.org.au Hi, > -----Original Message----- > From: Gonglei (Arei) > Sent: Tuesday, November 22, 2016 4:10 PM > To: linux-kernel@vger.kernel.org; qemu-devel@nongnu.org; > virtio-dev@lists.oasis-open.org; virtualization@lists.linux-foundation.org; > linux-crypto@vger.kernel.org > Subject: [PATCH v2 0/2] virtio-crypto: add Linux driver > > The virtio crypto device is a virtual cryptography device > as well as a kind of virtual hardware accelerator for > virtual machines. The encryption anddecryption requests > are placed in the data queue and are ultimately handled by > thebackend crypto accelerators. The second queue is the > control queue used to create or destroy sessions for > symmetric algorithms and will control some advanced features > in the future. The virtio crypto device provides the following > cryptoservices: CIPHER, MAC, HASH, and AEAD. > > For more information about virtio-crypto device, please see: > http://qemu-project.org/Features/VirtioCrypto > > For better reviewing: > > Patch 1 introduces the little edian functions for VIRTIO_1 > devices. > > Patch 2 mainly includes five files: > 1) virtio_crypto.h is the header file for virtio-crypto device, > which is based on the virtio-crypto specification. > 2) virtio_crypto.c is the entry of the driver module, > which is similar with other virtio devices, such as virtio-net, > virtio-input etc. > 3) virtio_crypto_mgr.c is used to manage the virtio > crypto devices in the system. We support up to 32 virtio-crypto > devices currently. I use a global list to store the virtio crypto > devices which refer to Intel QAT driver. Meanwhile, the file > includs the functions of add/del/search/start/stop for virtio > crypto devices. > 4) virtio_crypto_common.h is a private header file for virtio > crypto driver, includes structure definations, and function declarations. > 5) virtio_crypto_algs.c is the realization of algs based on Linux Crypto > Framwork, > which can register different crypto algorithms. Currently it's only support > AES-CBC. > The Crypto guys can mainly focus to this file. > > Actually I have no idea the virtio-crypto driver should be gone in whose > tree, Michael's or Herbert's? > > Would you give me a feedback? Thanks a lot! > Ping? Any ideas? Thanks. Regards, -Gonglei > > v2: > - stop doing DMA from the stack, CONFIG_VMAP_STACK=y [Salvatore] > - convert __virtio32/64 to __le32/64 in virtio_crypto.h > - remove VIRTIO_CRYPTO_S_STARTED based on the lastest virtio crypto spec. > - introduces the little edian functions for VIRTIO_1 devices in patch 1. > > Gonglei (2): > virtio: introduce little edian functions for virtio_cread/write# > family > crypto: add virtio-crypto driver > > MAINTAINERS | 8 + > drivers/crypto/Kconfig | 2 + > drivers/crypto/Makefile | 1 + > drivers/crypto/virtio/Kconfig | 10 + > drivers/crypto/virtio/Makefile | 5 + > drivers/crypto/virtio/virtio_crypto.c | 444 > +++++++++++++++++++++++ > drivers/crypto/virtio/virtio_crypto_algs.c | 524 > +++++++++++++++++++++++++++ > drivers/crypto/virtio/virtio_crypto_common.h | 124 +++++++ > drivers/crypto/virtio/virtio_crypto_mgr.c | 258 +++++++++++++ > include/linux/virtio_config.h | 45 +++ > include/uapi/linux/Kbuild | 1 + > include/uapi/linux/virtio_crypto.h | 435 > ++++++++++++++++++++++ > include/uapi/linux/virtio_ids.h | 1 + > 13 files changed, 1858 insertions(+) > create mode 100644 drivers/crypto/virtio/Kconfig > create mode 100644 drivers/crypto/virtio/Makefile > create mode 100644 drivers/crypto/virtio/virtio_crypto.c > create mode 100644 drivers/crypto/virtio/virtio_crypto_algs.c > create mode 100644 drivers/crypto/virtio/virtio_crypto_common.h > create mode 100644 drivers/crypto/virtio/virtio_crypto_mgr.c > create mode 100644 include/uapi/linux/virtio_crypto.h > > -- > 1.8.3.1 > ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <1479802223-121104-3-git-send-email-arei.gonglei@huawei.com>]
* Re: [PATCH v2 2/2] crypto: add virtio-crypto driver [not found] ` <1479802223-121104-3-git-send-email-arei.gonglei@huawei.com> @ 2016-11-27 3:27 ` Michael S. Tsirkin [not found] ` <20161127045532-mutt-send-email-mst@kernel.org> 1 sibling, 0 replies; 13+ messages in thread From: Michael S. Tsirkin @ 2016-11-27 3:27 UTC (permalink / raw) To: Gonglei Cc: virtio-dev, weidong.huang, claudio.fontana, hanweidong, qemu-devel, luonengjun, linux-kernel, virtualization, salvatore.benedetto, xuquan8, linux-crypto, stefanha, jianjay.zhou, longpeng2, arei.gonglei, davem, wu.wubin, herbert On Tue, Nov 22, 2016 at 04:10:23PM +0800, Gonglei wrote: > This patch introduces virtio-crypto driver for Linux Kernel. > > The virtio crypto device is a virtual cryptography device > as well as a kind of virtual hardware accelerator for > virtual machines. The encryption anddecryption requests > are placed in the data queue and are ultimately handled by > thebackend crypto accelerators. The second queue is the > control queue used to create or destroy sessions for > symmetric algorithms and will control some advanced features > in the future. The virtio crypto device provides the following > cryptoservices: CIPHER, MAC, HASH, and AEAD. > > For more information about virtio-crypto device, please see: > http://qemu-project.org/Features/VirtioCrypto > > CC: Michael S. Tsirkin <mst@redhat.com> > CC: Cornelia Huck <cornelia.huck@de.ibm.com> > CC: Stefan Hajnoczi <stefanha@redhat.com> > CC: Herbert Xu <herbert@gondor.apana.org.au> > CC: Halil Pasic <pasic@linux.vnet.ibm.com> > CC: David S. Miller <davem@davemloft.net> > CC: Zeng Xin <xin.zeng@intel.com> > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > --- > MAINTAINERS | 8 + > drivers/crypto/Kconfig | 2 + > drivers/crypto/Makefile | 1 + > drivers/crypto/virtio/Kconfig | 10 + > drivers/crypto/virtio/Makefile | 5 + > drivers/crypto/virtio/virtio_crypto.c | 444 +++++++++++++++++++++++ > drivers/crypto/virtio/virtio_crypto_algs.c | 524 +++++++++++++++++++++++++++ > drivers/crypto/virtio/virtio_crypto_common.h | 124 +++++++ > drivers/crypto/virtio/virtio_crypto_mgr.c | 258 +++++++++++++ > include/uapi/linux/Kbuild | 1 + > include/uapi/linux/virtio_crypto.h | 435 ++++++++++++++++++++++ > include/uapi/linux/virtio_ids.h | 1 + > 12 files changed, 1813 insertions(+) > create mode 100644 drivers/crypto/virtio/Kconfig > create mode 100644 drivers/crypto/virtio/Makefile > create mode 100644 drivers/crypto/virtio/virtio_crypto.c > create mode 100644 drivers/crypto/virtio/virtio_crypto_algs.c > create mode 100644 drivers/crypto/virtio/virtio_crypto_common.h > create mode 100644 drivers/crypto/virtio/virtio_crypto_mgr.c > create mode 100644 include/uapi/linux/virtio_crypto.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 411e3b8..d6b18bb 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -12844,6 +12844,14 @@ S: Maintained > F: drivers/virtio/virtio_input.c > F: include/uapi/linux/virtio_input.h > > +VIRTIO CRYPTO DRIVER > +M: Gonglei <arei.gonglei@huawei.com> > +L: virtualization@lists.linux-foundation.org > +L: linux-crypto@vger.kernel.org > +S: Maintained > +F: drivers/crypto/virtio/ > +F: include/uapi/linux/virtio_crypto.h > + > VIA RHINE NETWORK DRIVER > S: Orphan > F: drivers/net/ethernet/via/via-rhine.c > diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig > index 4d2b81f..7956478 100644 > --- a/drivers/crypto/Kconfig > +++ b/drivers/crypto/Kconfig > @@ -555,4 +555,6 @@ config CRYPTO_DEV_ROCKCHIP > > source "drivers/crypto/chelsio/Kconfig" > > +source "drivers/crypto/virtio/Kconfig" > + > endif # CRYPTO_HW > diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile > index ad7250f..bc53cb8 100644 > --- a/drivers/crypto/Makefile > +++ b/drivers/crypto/Makefile > @@ -32,3 +32,4 @@ obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ > obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/ > obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/ > obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/ > +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/ > diff --git a/drivers/crypto/virtio/Kconfig b/drivers/crypto/virtio/Kconfig > new file mode 100644 > index 0000000..ceae88c > --- /dev/null > +++ b/drivers/crypto/virtio/Kconfig > @@ -0,0 +1,10 @@ > +config CRYPTO_DEV_VIRTIO > + tristate "VirtIO crypto driver" > + depends on VIRTIO > + select CRYPTO_AEAD > + select CRYPTO_AUTHENC > + select CRYPTO_BLKCIPHER > + default m > + help > + This driver provides support for virtio crypto device. If you > + choose 'M' here, this module will be called virtio-crypto. > diff --git a/drivers/crypto/virtio/Makefile b/drivers/crypto/virtio/Makefile > new file mode 100644 > index 0000000..a316e92 > --- /dev/null > +++ b/drivers/crypto/virtio/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio-crypto.o > +virtio-crypto-objs := \ > + virtio_crypto_algs.o \ > + virtio_crypto_mgr.o \ > + virtio_crypto.o > diff --git a/drivers/crypto/virtio/virtio_crypto.c b/drivers/crypto/virtio/virtio_crypto.c > new file mode 100644 > index 0000000..56fdfed > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto.c > @@ -0,0 +1,444 @@ > + /* Driver for Virtio crypto device. > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/virtio_config.h> > +#include <linux/cpu.h> > + > +#include <uapi/linux/virtio_crypto.h> > +#include "virtio_crypto_common.h" > + > + > +static void virtcrypto_dataq_callback(struct virtqueue *vq) > +{ > + struct virtio_crypto *vcrypto = vq->vdev->priv; > + struct virtio_crypto_request *vc_req; > + unsigned long flags; > + unsigned int len; > + struct ablkcipher_request *ablk_req; > + int error; > + > + spin_lock_irqsave(&vcrypto->lock, flags); > + do { > + virtqueue_disable_cb(vq); > + while ((vc_req = virtqueue_get_buf(vq, &len)) != NULL) { > + if (vc_req->type == VIRTIO_CRYPTO_SYM_OP_CIPHER) { > + switch (vc_req->status) { > + case VIRTIO_CRYPTO_OK: > + error = 0; > + break; > + case VIRTIO_CRYPTO_INVSESS: > + case VIRTIO_CRYPTO_ERR: > + error = -EINVAL; > + break; > + case VIRTIO_CRYPTO_BADMSG: > + error = -EBADMSG; > + break; > + default: > + error = -EIO; > + break; > + } > + ablk_req = vc_req->ablkcipher_req; > + /* Finish the encrypt or decrypt process */ > + ablk_req->base.complete(&ablk_req->base, error); > + } > + > + kfree(vc_req->req_data); > + kfree(vc_req->sgs); > + } > + } while (!virtqueue_enable_cb(vq)); > + spin_unlock_irqrestore(&vcrypto->lock, flags); > +} > + > +static int virtcrypto_find_vqs(struct virtio_crypto *vi) > +{ > + vq_callback_t **callbacks; > + struct virtqueue **vqs; > + int ret = -ENOMEM; > + int i, total_vqs; > + const char **names; > + > + /* We expect 1 data virtqueue, followed by > + * possible N-1 data queues used in multiqueue mode, followed by > + * control vq. > + */ > + total_vqs = vi->max_data_queues + 1; > + > + /* Allocate space for find_vqs parameters */ > + vqs = kcalloc(total_vqs, sizeof(*vqs), GFP_KERNEL); > + if (!vqs) > + goto err_vq; > + callbacks = kcalloc(total_vqs, sizeof(*callbacks), GFP_KERNEL); > + if (!callbacks) > + goto err_callback; > + names = kcalloc(total_vqs, sizeof(*names), GFP_KERNEL); > + if (!names) > + goto err_names; > + > + /* Parameters for control virtqueue */ > + callbacks[total_vqs - 1] = NULL; > + names[total_vqs - 1] = "controlq"; > + > + /* Allocate/initialize parameters for data virtqueues */ > + for (i = 0; i < vi->max_data_queues; i++) { > + callbacks[i] = virtcrypto_dataq_callback; > + snprintf(vi->data_vq[i].name, sizeof(vi->data_vq[i].name), > + "dataq.%d", i); > + names[i] = vi->data_vq[i].name; > + } > + > + ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks, > + names); > + if (ret) > + goto err_find; > + > + vi->ctrl_vq = vqs[total_vqs - 1]; > + > + for (i = 0; i < vi->max_data_queues; i++) > + vi->data_vq[i].vq = vqs[i]; > + > + kfree(names); > + kfree(callbacks); > + kfree(vqs); > + > + return 0; > + > +err_find: > + kfree(names); > +err_names: > + kfree(callbacks); > +err_callback: > + kfree(vqs); > +err_vq: > + return ret; > +} > + > +static int virtcrypto_alloc_queues(struct virtio_crypto *vi) > +{ > + vi->data_vq = kcalloc(vi->max_data_queues, sizeof(*vi->data_vq), > + GFP_KERNEL); > + if (!vi->data_vq) > + return -ENOMEM; > + > + return 0; > +} > + > +static void virtcrypto_clean_affinity(struct virtio_crypto *vi, long hcpu) > +{ > + int i; > + > + if (vi->affinity_hint_set) { > + for (i = 0; i < vi->max_data_queues; i++) > + virtqueue_set_affinity(vi->data_vq[i].vq, -1); > + > + vi->affinity_hint_set = false; > + } > +} > + > +static void virtcrypto_set_affinity(struct virtio_crypto *vi) > +{ > + int i; > + int cpu; > + > + /* > + * In multiqueue mode, when the number of cpu is equal to the number > + * of queue, we let the queue to be private to one cpu by > + * setting the affinity hint to eliminate the contention. > + */ > + if (vi->curr_queue == 1 || > + vi->max_data_queues != num_online_cpus()) { > + virtcrypto_clean_affinity(vi, -1); > + return; > + } > + So how can you handle cpu hotplug then? I would imagine making max_data_queues > num_online_cpus and initializing just the required number would be a saner way. > + i = 0; > + for_each_online_cpu(cpu) { > + virtqueue_set_affinity(vi->data_vq[i].vq, cpu); > + i++; > + } > + > + vi->affinity_hint_set = true; > +} > + Above is racy in prsence of cpu hotplug. Is there a userspace interface to fix up affinity after hotplug? If not you need to get notified after hotplug and fix it up yourself. > +static void virtcrypto_free_queues(struct virtio_crypto *vi) > +{ > + kfree(vi->data_vq); > +} > + > +static int virtcrypto_init_vqs(struct virtio_crypto *vi) > +{ > + int ret; > + > + /* Allocate send & receive queues */ > + ret = virtcrypto_alloc_queues(vi); > + if (ret) > + goto err; > + > + ret = virtcrypto_find_vqs(vi); > + if (ret) > + goto err_free; > + > + get_online_cpus(); > + virtcrypto_set_affinity(vi); > + put_online_cpus(); > + > + return 0; > + > +err_free: > + virtcrypto_free_queues(vi); > +err: > + return ret; > +} > + > +static int virtcrypto_update_status(struct virtio_crypto *vcrypto) > +{ > + __le32 status_le; > + u32 status; > + int err; > + > + status_le = virtio_cread32_le(vcrypto->vdev, > + offsetof(struct virtio_crypto_config, status)); > + status = le32_to_cpu(status_le); > + > + /* Ignore unknown (future) status bits */ > + status &= VIRTIO_CRYPTO_S_HW_READY; > + > + if (vcrypto->status == status) > + return 0; > + > + vcrypto->status = status; > + > + if (vcrypto->status & VIRTIO_CRYPTO_S_HW_READY) { > + err = virtcrypto_dev_start(vcrypto); > + if (err) { > + dev_err(&vcrypto->vdev->dev, > + "Failed to start virtio crypto device.\n"); > + virtcrypto_dev_stop(vcrypto); > + return -1; > + } > + dev_info(&vcrypto->vdev->dev, "Accelerator is ready\n"); > + } else { > + virtcrypto_dev_stop(vcrypto); > + dev_info(&vcrypto->vdev->dev, "Accelerator is not ready\n"); > + } > + > + return 0; > +} > + > +static void virtcrypto_del_vqs(struct virtio_crypto *vcrypto) > +{ > + struct virtio_device *vdev = vcrypto->vdev; > + > + virtcrypto_clean_affinity(vcrypto, -1); > + > + vdev->config->del_vqs(vdev); > + > + virtcrypto_free_queues(vcrypto); > +} > + > +static int virtcrypto_probe(struct virtio_device *vdev) > +{ > + int err = -EFAULT; > + struct virtio_crypto *vcrypto; > + __le32 max_data_queues_le = 0, max_cipher_key_len_le = 0; > + __le32 max_auth_key_len_le = 0; > + __le64 max_size_le = 0; > + Pls validate that it's a modern device (has VERSION_1 set). We should find a way to do it in a central place, but we don't have that now. > + if (!vdev->config->get) { > + dev_err(&vdev->dev, "%s failure: config access disabled\n", > + __func__); > + return -EINVAL; > + } > + > + if (num_possible_nodes() > 1 && dev_to_node(&vdev->dev) < 0) { > + /* > + * If the accelerator is connected to a node with no memory > + * there is no point in using the accelerator since the remote > + * memory transaction will be very slow. > + */ > + dev_err(&vdev->dev, "Invalid NUMA configuration.\n"); > + return -EINVAL; > + } > + > + vcrypto = kzalloc_node(sizeof(*vcrypto), GFP_KERNEL, > + dev_to_node(&vdev->dev)); > + if (!vcrypto) > + return -ENOMEM; > + > + max_data_queues_le = virtio_cread32_le(vdev, > + offsetof(struct virtio_crypto_config, max_dataqueues)); > + vcrypto->max_data_queues = le32_to_cpu(max_data_queues_le); > + if (vcrypto->max_data_queues < 1) > + vcrypto->max_data_queues = 1; > + > + dev_info(&vdev->dev, "max_queues: %u\n", vcrypto->max_data_queues); > + > + max_cipher_key_len_le = virtio_cread32_le(vdev, > + offsetof(struct virtio_crypto_config, max_cipher_key_len)); > + max_auth_key_len_le = virtio_cread32_le(vdev, > + offsetof(struct virtio_crypto_config, max_auth_key_len)); > + max_size_le = virtio_cread64_le(vdev, > + offsetof(struct virtio_crypto_config, max_size)); > + > + /* Add virtio crypto device to global table */ > + err = virtcrypto_devmgr_add_dev(vcrypto); > + if (err) { > + dev_err(&vdev->dev, "Failed to add new virtio crypto device.\n"); > + goto free; > + } > + vcrypto->owner = THIS_MODULE; > + vcrypto = vdev->priv = vcrypto; > + vcrypto->vdev = vdev; > + spin_lock_init(&vcrypto->lock); > + spin_lock_init(&vcrypto->ctrl_lock); > + > + /* Use sigle data queue as default */ > + vcrypto->curr_queue = 1; > + vcrypto->max_cipher_key_len = le32_to_cpu(max_cipher_key_len_le); > + vcrypto->max_auth_key_len = le32_to_cpu(max_auth_key_len_le); > + vcrypto->max_size = le64_to_cpu(max_size_le); > + > + err = virtcrypto_init_vqs(vcrypto); > + if (err) { > + dev_err(&vdev->dev, "Failed to initialize vqs.\n"); > + goto free_dev; > + } > + virtio_device_ready(vdev); > + > + err = virtcrypto_update_status(vcrypto); > + if (err) { > + err = -EFAULT; Why EFAULT? > + goto free_vqs; > + } > + > + return 0; > + > +free_vqs: > + virtcrypto_del_vqs(vcrypto); as you called virtio_device_ready this is likely unsafe unless you first reset device or make sure there are no interrupts in some other way. > +free_dev: > + virtcrypto_devmgr_rm_dev(vcrypto); > +free: > + kfree(vcrypto); > + return err; > +} > + > +static void virtcrypto_free_unused_reqs(struct virtio_crypto *vcrypto) > +{ > + struct virtio_crypto_request *vc_req; > + int i; > + struct virtqueue *vq; > + > + for (i = 0; i < vcrypto->max_data_queues; i++) { > + vq = vcrypto->data_vq[i].vq; > + while ((vc_req = virtqueue_detach_unused_buf(vq)) != NULL) { > + kfree(vc_req->req_data); > + kfree(vc_req->sgs); > + } > + } > +} > + > +static void virtcrypto_remove(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + > + dev_info(&vdev->dev, "Start virtcrypto_remove.\n"); > + > + if (virtcrypto_dev_started(vcrypto)) > + virtcrypto_dev_stop(vcrypto); > + vdev->config->reset(vdev); > + virtcrypto_free_unused_reqs(vcrypto); > + virtcrypto_del_vqs(vcrypto); > + virtcrypto_devmgr_rm_dev(vcrypto); > + kfree(vcrypto); > +} > + > +static void virtcrypto_config_changed(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + > + virtcrypto_update_status(vcrypto); > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int virtcrypto_freeze(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + unsigned long flags; > + > + virtcrypto_free_unused_reqs(vcrypto); > + spin_lock_irqsave(&vcrypto->lock, flags); > + if (virtcrypto_dev_started(vcrypto)) > + virtcrypto_dev_stop(vcrypto); This is taking mutex locks under a spinlock. Highly unlikely to work. Try this with lockdep enabled. > + spin_unlock_irqrestore(&vcrypto->lock, flags); > + > + virtcrypto_del_vqs(vcrypto); > + return 0; > +} > + > +static int virtcrypto_restore(struct virtio_device *vdev) > +{ > + struct virtio_crypto *vcrypto = vdev->priv; > + int err; > + > + err = virtcrypto_init_vqs(vcrypto); > + if (err) > + return err; > + > + virtio_device_ready(vdev); > + err = virtcrypto_dev_start(vcrypto); > + if (err) { > + dev_err(&vdev->dev, "Failed to start virtio crypto device.\n"); > + return -EFAULT; > + } > + > + return 0; > +} > +#endif > + > + > +static unsigned int features[] = { > + /* none */ > +}; > + > +static struct virtio_device_id id_table[] = { > + { VIRTIO_ID_CRYPTO, VIRTIO_DEV_ANY_ID }, > + { 0 }, > +}; > + > +static struct virtio_driver virtio_crypto_driver = { > + .driver.name = KBUILD_MODNAME, > + .driver.owner = THIS_MODULE, > + .feature_table = features, > + .feature_table_size = ARRAY_SIZE(features), > + .id_table = id_table, > + .probe = virtcrypto_probe, > + .remove = virtcrypto_remove, > + .config_changed = virtcrypto_config_changed, > +#ifdef CONFIG_PM_SLEEP > + .freeze = virtcrypto_freeze, > + .restore = virtcrypto_restore, > +#endif > +}; > + > +module_virtio_driver(virtio_crypto_driver); > + > +MODULE_DEVICE_TABLE(virtio, id_table); > +MODULE_DESCRIPTION("virtio crypto device driver"); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Gonglei <arei.gonglei@huawei.com>"); > diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c > new file mode 100644 > index 0000000..7b57584 > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_algs.c > @@ -0,0 +1,524 @@ > + /* Algorithms supported by virtio crypto device > + * > + * Authors: Gonglei <arei.gonglei@huawei.com> > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/scatterlist.h> > +#include <crypto/algapi.h> > +#include <linux/err.h> > +#include <crypto/scatterwalk.h> > +#include <linux/atomic.h> > + > +#include <uapi/linux/virtio_crypto.h> > +#include "virtio_crypto_common.h" > + > +static DEFINE_MUTEX(algs_lock); > +static unsigned int virtio_crypto_active_devs; > + > +static u64 virtio_crypto_alg_sg_nents_length(struct scatterlist *sg) > +{ > + u64 total = 0; > + > + for (total = 0; sg; sg = sg_next(sg)) > + total += sg->length; > + > + return total; > +} > + > +static int virtio_crypto_alg_validate_key(int key_len, int *alg) > +{ > + switch (key_len) { > + case AES_KEYSIZE_128: > + case AES_KEYSIZE_192: > + case AES_KEYSIZE_256: > + *alg = VIRTIO_CRYPTO_CIPHER_AES_CBC; > + break; > + default: > + return -EINVAL; > + } > + return 0; > +} > + > +static int virtio_crypto_alg_ablkcipher_init_session( > + struct virtio_crypto_ablkcipher_ctx *ctx, > + int alg, const uint8_t *key, > + unsigned int keylen, > + int encrypt) > +{ > + struct scatterlist outhdr, key_sg, inhdr, *sgs[3]; > + unsigned int tmp; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : VIRTIO_CRYPTO_OP_DECRYPT; > + int err; > + unsigned int num_out = 0, num_in = 0; > + > + /* > + * Avoid to do DMA from the stack, switch to using > + * dynamically-allocated for the key > + */ > + uint8_t *cipher_key = kmalloc(keylen, GFP_ATOMIC); Is all crypto using GFP_ATOMIC like this? Is there code that recovers if this fails? > + > + if (!cipher_key) > + return -ENOMEM; > + > + memcpy(cipher_key, key, keylen); > + > + spin_lock(&vcrypto->ctrl_lock); > + /* Pad ctrl header */ > + vcrypto->ctrl.header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); > + vcrypto->ctrl.header.algo = cpu_to_le32((uint32_t)alg); why cast here? > + /* Set the default dataqueue id to 0 */ > + vcrypto->ctrl.header.queue_id = 0; > + > + vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); > + /* Pad cipher's parameters */ > + vcrypto->ctrl.u.sym_create_session.op_type = > + cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = > + vcrypto->ctrl.header.algo; > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = > + cpu_to_le32(keylen); > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = > + cpu_to_le32(op); > + > + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sgs[num_out++] = &outhdr; > + > + /* Set key */ > + sg_init_one(&key_sg, cipher_key, keylen); > + sgs[num_out++] = &key_sg; > + > + /* Return status and session id back */ > + sg_init_one(&inhdr, &vcrypto->input, sizeof(vcrypto->input)); > + sgs[num_out + num_in++] = &inhdr; > + > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > + num_in, vcrypto, GFP_ATOMIC); > + if (err < 0) { > + spin_unlock(&vcrypto->ctrl_lock); > + kfree(cipher_key); > + return err; > + } > + virtqueue_kick(vcrypto->ctrl_vq); > + > + /* > + * Spin for a response, the kick causes an ioport write, trapping > + * into the hypervisor, so the request should be handled immediately. > + */ > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > + cpu_relax(); > + > + if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { > + spin_unlock(&vcrypto->ctrl_lock); > + pr_err("virtio_crypto: Create session failed status: %u\n", > + le32_to_cpu(vcrypto->input.status)); > + kfree(cipher_key); > + return -EINVAL; > + } > + spin_unlock(&vcrypto->ctrl_lock); > + > + spin_lock(&ctx->lock); > + if (encrypt) > + ctx->enc_sess_info.session_id = > + le64_to_cpu(vcrypto->input.session_id); > + else > + ctx->dec_sess_info.session_id = > + le64_to_cpu(vcrypto->input.session_id); > + spin_unlock(&ctx->lock); > + > + kfree(cipher_key); > + return 0; > +} > + > +static int virtio_crypto_alg_ablkcipher_close_session( > + struct virtio_crypto_ablkcipher_ctx *ctx, > + int encrypt) > +{ > + struct scatterlist outhdr, status_sg, *sgs[2]; > + unsigned int tmp; > + struct virtio_crypto_destroy_session_req *destroy_session; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int err; > + unsigned int num_out = 0, num_in = 0; > + > + spin_lock(&vcrypto->ctrl_lock); > + vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; > + /* Pad ctrl header */ > + vcrypto->ctrl.header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); > + /* Set the default virtqueue id to 0 */ > + vcrypto->ctrl.header.queue_id = 0; > + > + destroy_session = &vcrypto->ctrl.u.destroy_session; > + > + if (encrypt) > + destroy_session->session_id = > + cpu_to_le64(ctx->enc_sess_info.session_id); > + else > + destroy_session->session_id = > + cpu_to_le64(ctx->dec_sess_info.session_id); > + > + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > + sgs[num_out++] = &outhdr; > + > + /* Return status and session id back */ > + sg_init_one(&status_sg, &vcrypto->ctrl_status.status, > + sizeof(vcrypto->ctrl_status.status)); > + sgs[num_out + num_in++] = &status_sg; > + > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > + num_in, vcrypto, GFP_ATOMIC); > + if (err < 0) { > + spin_unlock(&vcrypto->ctrl_lock); > + return err; > + } > + virtqueue_kick(vcrypto->ctrl_vq); > + > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > + cpu_relax(); > + > + if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { > + spin_unlock(&vcrypto->ctrl_lock); > + pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", > + vcrypto->ctrl_status.status, > + destroy_session->session_id); > + > + return -EINVAL; > + } > + spin_unlock(&vcrypto->ctrl_lock); > + > + return 0; > +} > + > +static int virtio_crypto_alg_ablkcipher_init_sessions( > + struct virtio_crypto_ablkcipher_ctx *ctx, > + const uint8_t *key, unsigned int keylen) > +{ > + int alg; > + int ret; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + > + if (keylen > vcrypto->max_cipher_key_len) { > + pr_err("virtio_crypto: the key is too long\n"); > + goto bad_key; > + } > + > + if (virtio_crypto_alg_validate_key(keylen, &alg)) > + goto bad_key; > + > + /* Create encryption session */ > + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, > + alg, key, keylen, 1); > + if (ret) > + return ret; > + /* Create decryption session */ > + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, > + alg, key, keylen, 0); > + if (ret) { > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > + return ret; > + } > + return 0; > + > +bad_key: > + crypto_tfm_set_flags(ctx->tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); > + return -EINVAL; > +} > + > +/* Note: kernel crypto API realization */ > +static int virtio_crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm, > + const uint8_t *key, > + unsigned int keylen) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(tfm); > + int ret; > + > + spin_lock(&ctx->lock); > + > + if (!ctx->vcrypto) { > + /* New key */ > + int node = virtio_crypto_get_current_node(); > + struct virtio_crypto *vcrypto = > + virtcrypto_get_dev_node(node); > + if (!vcrypto) { > + vcrypto = virtcrypto_devmgr_get_first(); > + if (!vcrypto) { > + pr_err("virtio_crypto: Could not find a virtio device in the system"); > + spin_unlock(&ctx->lock); > + return -ENODEV; > + } > + } > + > + ctx->vcrypto = vcrypto; > + } > + spin_unlock(&ctx->lock); > + > + ret = virtio_crypto_alg_ablkcipher_init_sessions(ctx, key, keylen); > + if (ret) { > + virtcrypto_dev_put(ctx->vcrypto); > + ctx->vcrypto = NULL; > + > + return ret; > + } > + > + return 0; > +} > + > +static int > +__virtio_crypto_ablkcipher_do_req(struct virtio_crypto_request *vc_req, > + struct ablkcipher_request *req, > + struct data_queue *data_vq, > + __u8 op) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = vc_req->ablkcipher_ctx; > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + struct virtio_crypto_op_data_req *req_data; > + int src_nents, dst_nents; > + int err; > + unsigned long flags; > + struct scatterlist outhdr, iv_sg, status_sg, **sgs; > + int i; > + u64 dst_len; > + unsigned int num_out = 0, num_in = 0; > + int sg_total; > + > + src_nents = sg_nents_for_len(req->src, req->nbytes); > + dst_nents = sg_nents(req->dst); > + > + pr_debug("virtio_crypto: Number of sgs (src_nents: %d, dst_nents: %d)\n", > + src_nents, dst_nents); > + > + /* Why 3? outhdr + iv + inhdr */ > + sg_total = src_nents + dst_nents + 3; > + sgs = kzalloc_node(sg_total * sizeof(*sgs), GFP_ATOMIC, > + dev_to_node(&vcrypto->vdev->dev)); > + if (!sgs) > + return -ENOMEM; > + > + req_data = kzalloc_node(sizeof(*req_data), GFP_ATOMIC, > + dev_to_node(&vcrypto->vdev->dev)); > + if (!req_data) { > + kfree(sgs); > + return -ENOMEM; > + } > + > + vc_req->req_data = req_data; > + vc_req->type = VIRTIO_CRYPTO_SYM_OP_CIPHER; > + /* Head of operation */ > + if (op) { > + req_data->header.session_id = > + cpu_to_le64(ctx->enc_sess_info.session_id); > + req_data->header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_ENCRYPT); > + } else { > + req_data->header.session_id = > + cpu_to_le64(ctx->dec_sess_info.session_id); > + req_data->header.opcode = > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DECRYPT); > + } > + req_data->u.sym_req.op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > + req_data->u.sym_req.u.cipher.para.iv_len = cpu_to_le32(AES_BLOCK_SIZE); > + req_data->u.sym_req.u.cipher.para.src_data_len = > + cpu_to_le32(req->nbytes); > + > + dst_len = virtio_crypto_alg_sg_nents_length(req->dst); > + if (unlikely(dst_len > U32_MAX)) { > + pr_err("virtio_crypto: The dst_len is beyond U32_MAX\n"); > + err = -EINVAL; > + goto free; > + } > + > + pr_debug("virtio_crypto: src_len: %u, dst_len: %llu\n", > + req->nbytes, dst_len); > + > + if (unlikely(req->nbytes + dst_len + AES_BLOCK_SIZE + > + sizeof(vc_req->status) > vcrypto->max_size)) { > + pr_err("virtio_crypto: The length is too big\n"); > + err = -EINVAL; > + goto free; > + } > + > + req_data->u.sym_req.u.cipher.para.dst_data_len = > + cpu_to_le32((uint32_t)dst_len); > + > + /* Outhdr */ > + sg_init_one(&outhdr, req_data, sizeof(*req_data)); > + sgs[num_out++] = &outhdr; > + > + /* IV */ > + sg_init_one(&iv_sg, req->info, AES_BLOCK_SIZE); > + sgs[num_out++] = &iv_sg; > + > + /* Source data */ > + for (i = 0; i < src_nents; i++) > + sgs[num_out++] = &req->src[i]; > + > + /* Destination data */ > + for (i = 0; i < dst_nents; i++) > + sgs[num_out + num_in++] = &req->dst[i]; > + > + /* Status */ > + sg_init_one(&status_sg, &vc_req->status, sizeof(vc_req->status)); > + sgs[num_out + num_in++] = &status_sg; > + > + vc_req->sgs = sgs; > + > + spin_lock_irqsave(&vcrypto->lock, flags); > + err = virtqueue_add_sgs(data_vq->vq, sgs, num_out, > + num_in, vc_req, GFP_ATOMIC); > + spin_unlock_irqrestore(&vcrypto->lock, flags); > + if (unlikely(err < 0)) > + goto free; > + > + return 0; > + > +free: > + kfree(req_data); > + kfree(sgs); > + return err; > +} > + > +static int virtio_crypto_ablkcipher_encrypt(struct ablkcipher_request *req) > +{ > + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); > + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int ret; > + /* Use the first data virtqueue as default */ > + struct data_queue *data_vq = &vcrypto->data_vq[0]; > + > + vc_req->ablkcipher_ctx = ctx; > + vc_req->ablkcipher_req = req; > + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 1); > + if (ret < 0) { > + pr_err("virtio_crypto: Encryption failed!\n"); > + return ret; > + } > + virtqueue_kick(data_vq->vq); > + > + return -EINPROGRESS; > +} > + > +static int virtio_crypto_ablkcipher_decrypt(struct ablkcipher_request *req) > +{ > + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); > + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); > + struct virtio_crypto *vcrypto = ctx->vcrypto; > + int ret; > + /* Use the first data virtqueue as default */ > + struct data_queue *data_vq = &vcrypto->data_vq[0]; > + > + vc_req->ablkcipher_ctx = ctx; > + vc_req->ablkcipher_req = req; > + > + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 0); > + if (ret < 0) { > + pr_err("virtio_crypto: Decryption failed!\n"); > + return ret; > + } > + virtqueue_kick(data_vq->vq); > + > + return -EINPROGRESS; > +} > + > +static int virtio_crypto_ablkcipher_init(struct crypto_tfm *tfm) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); > + > + spin_lock_init(&ctx->lock); > + tfm->crt_ablkcipher.reqsize = sizeof(struct virtio_crypto_request); > + ctx->tfm = tfm; > + > + return 0; > +} > + > +static void virtio_crypto_ablkcipher_exit(struct crypto_tfm *tfm) > +{ > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); > + > + if (!ctx->vcrypto) > + return; > + > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > + virtio_crypto_alg_ablkcipher_close_session(ctx, 0); > + virtcrypto_dev_put(ctx->vcrypto); > + ctx->vcrypto = NULL; > +} > + > +static struct crypto_alg virtio_crypto_algs[] = { { > + .cra_name = "cbc(aes)", > + .cra_driver_name = "virtio_crypto_aes_cbc", > + .cra_priority = 4001, > + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, > + .cra_blocksize = AES_BLOCK_SIZE, > + .cra_ctxsize = sizeof(struct virtio_crypto_ablkcipher_ctx), > + .cra_alignmask = 0, > + .cra_module = THIS_MODULE, > + .cra_type = &crypto_ablkcipher_type, > + .cra_init = virtio_crypto_ablkcipher_init, > + .cra_exit = virtio_crypto_ablkcipher_exit, > + .cra_u = { > + .ablkcipher = { > + .setkey = virtio_crypto_ablkcipher_setkey, > + .decrypt = virtio_crypto_ablkcipher_decrypt, > + .encrypt = virtio_crypto_ablkcipher_encrypt, > + .min_keysize = AES_MIN_KEY_SIZE, > + .max_keysize = AES_MAX_KEY_SIZE, > + .ivsize = AES_BLOCK_SIZE, > + }, > + }, > +} }; > + > +int virtio_crypto_algs_register(void) > +{ > + int ret = 0, i; > + > + mutex_lock(&algs_lock); > + if (++virtio_crypto_active_devs != 1) > + goto unlock; > + > + for (i = 0; i < ARRAY_SIZE(virtio_crypto_algs); i++) { > + virtio_crypto_algs[i].cra_flags = > + CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC; > + } > + > + ret = crypto_register_algs(virtio_crypto_algs, > + ARRAY_SIZE(virtio_crypto_algs)); > + > +unlock: > + mutex_unlock(&algs_lock); > + return ret; > +} > + > +void virtio_crypto_algs_unregister(void) > +{ > + mutex_lock(&algs_lock); > + if (--virtio_crypto_active_devs != 0) > + goto unlock; > + > + crypto_unregister_algs(virtio_crypto_algs, > + ARRAY_SIZE(virtio_crypto_algs)); > + > +unlock: > + mutex_unlock(&algs_lock); > +} > diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h > new file mode 100644 > index 0000000..a599733 > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_common.h > @@ -0,0 +1,124 @@ > +/* Common header for Virtio crypto device. > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef _VIRITO_CRYPTO_COMMON_H > +#define _VIRITO_CRYPTO_COMMON_H > + > +#include <linux/virtio.h> > +#include <linux/crypto.h> > +#include <linux/spinlock.h> > +#include <crypto/aead.h> > +#include <crypto/aes.h> > +#include <crypto/authenc.h> > + > + > +/* Internal representation of a data virtqueue */ > +struct data_queue { > + /* Virtqueue associated with this send _queue */ > + struct virtqueue *vq; > + > + /* Name of the tx queue: dataq.$index */ > + char name[32]; > +}; > + > +struct virtio_crypto { > + struct virtio_device *vdev; > + struct virtqueue *ctrl_vq; > + struct data_queue *data_vq; > + > + /* To protect the vq operations for the dataq */ > + spinlock_t lock; > + > + /* To protect the vq operations for the controlq */ > + spinlock_t ctrl_lock; > + > + /* Maximum of data queues supported by the device */ > + u32 max_data_queues; > + > + /* Number of queue currently used by the driver */ > + u32 curr_queue; > + > + /* Maximum length of cipher key */ > + u32 max_cipher_key_len; > + /* Maximum length of authenticated key */ > + u32 max_auth_key_len; > + /* Maximum size of per request */ > + u64 max_size; > + > + /* Control VQ buffers: protected by the ctrl_lock */ > + struct virtio_crypto_op_ctrl_req ctrl; > + struct virtio_crypto_session_input input; > + struct virtio_crypto_inhdr ctrl_status; > + > + unsigned long status; > + atomic_t ref_count; > + struct list_head list; > + struct module *owner; > + uint8_t dev_id; > + > + /* Does the affinity hint is set for virtqueues? */ > + bool affinity_hint_set; > +}; > + > +struct virtio_crypto_sym_session_info { > + /* Backend session id, which come from the host side */ > + __u64 session_id; > +}; > + > +struct virtio_crypto_ablkcipher_ctx { > + struct virtio_crypto *vcrypto; > + struct crypto_tfm *tfm; > + > + struct virtio_crypto_sym_session_info enc_sess_info; > + struct virtio_crypto_sym_session_info dec_sess_info; > + > + /* Protects virtio_crypto_ablkcipher_ctx struct */ > + spinlock_t lock; > +}; > + > +struct virtio_crypto_request { > + /* Cipher or aead */ > + uint32_t type; > + uint8_t status; > + struct virtio_crypto_ablkcipher_ctx *ablkcipher_ctx; > + struct ablkcipher_request *ablkcipher_req; > + struct virtio_crypto_op_data_req *req_data; > + struct scatterlist **sgs; > +}; > + > +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev); > +struct list_head *virtcrypto_devmgr_get_head(void); > +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev); > +struct virtio_crypto *virtcrypto_devmgr_get_first(void); > +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev); > +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev); > +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev); > +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev); > +struct virtio_crypto *virtcrypto_get_dev_node(int node); > +int virtcrypto_dev_start(struct virtio_crypto *vcrypto); > +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto); > + > +static inline int virtio_crypto_get_current_node(void) > +{ > + return topology_physical_package_id(smp_processor_id()); > +} > + > +int virtio_crypto_algs_register(void); > +void virtio_crypto_algs_unregister(void); > + > +#endif /* _VIRITO_CRYPTO_COMMON_H */ > diff --git a/drivers/crypto/virtio/virtio_crypto_mgr.c b/drivers/crypto/virtio/virtio_crypto_mgr.c > new file mode 100644 > index 0000000..5b7260c > --- /dev/null > +++ b/drivers/crypto/virtio/virtio_crypto_mgr.c > @@ -0,0 +1,258 @@ > + /* Management for virtio crypto devices (refer to adf_dev_mgr.c) > + * > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/mutex.h> > +#include <linux/list.h> > +#include <linux/module.h> > + > +#include <uapi/linux/virtio_crypto.h> > +#include "virtio_crypto_common.h" > + > +static LIST_HEAD(virtio_crypto_table); > +static DEFINE_MUTEX(table_lock); > +static uint32_t num_devices; > + > +#define VIRTIO_CRYPTO_MAX_DEVICES 32 > + > + > +/* > + * virtcrypto_devmgr_add_dev() - Add vcrypto_dev to the acceleration > + * framework. > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Function adds virtio crypto device to the global list. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 0 on success, error code othewise. > + */ > +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev) > +{ > + struct list_head *itr; > + > + if (num_devices == VIRTIO_CRYPTO_MAX_DEVICES) { > + pr_info("virtio_crypto: only support up to %d devices\n", > + VIRTIO_CRYPTO_MAX_DEVICES); > + return -EFAULT; > + } > + > + mutex_lock(&table_lock); > + list_for_each(itr, &virtio_crypto_table) { > + struct virtio_crypto *ptr = > + list_entry(itr, struct virtio_crypto, list); > + > + if (ptr == vcrypto_dev) { > + mutex_unlock(&table_lock); > + return -EEXIST; > + } > + } > + atomic_set(&vcrypto_dev->ref_count, 0); > + list_add_tail(&vcrypto_dev->list, &virtio_crypto_table); > + vcrypto_dev->dev_id = num_devices++; > + mutex_unlock(&table_lock); > + return 0; > +} > + > +struct list_head *virtcrypto_devmgr_get_head(void) > +{ > + return &virtio_crypto_table; > +} > + > +/* > + * virtcrypto_devmgr_rm_dev() - Remove vcrypto_dev from the acceleration > + * framework. > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Function removes virtio crypto device from the acceleration framework. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: void > + */ > +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev) > +{ > + mutex_lock(&table_lock); > + list_del(&vcrypto_dev->list); > + num_devices--; > + mutex_unlock(&table_lock); > +} > + > +/* > + * virtcrypto_devmgr_get_first() > + * > + * Function returns the first virtio crypto device from the acceleration > + * framework. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: pointer to vcrypto_dev or NULL if not found. > + */ > +struct virtio_crypto *virtcrypto_devmgr_get_first(void) > +{ > + struct virtio_crypto *dev = NULL; > + > + if (!list_empty(&virtio_crypto_table)) > + dev = list_first_entry(&virtio_crypto_table, > + struct virtio_crypto, > + list); > + return dev; > +} > + > +/* > + * virtcrypto_dev_in_use() - Check whether vcrypto_dev is currently in use > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 1 when device is in use, 0 otherwise. > + */ > +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev) > +{ > + return atomic_read(&vcrypto_dev->ref_count) != 0; > +} > + > +/* > + * virtcrypto_dev_get() - Increment vcrypto_dev reference count > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Increment the vcrypto_dev refcount and if this is the first time > + * incrementing it during this period the vcrypto_dev is in use, > + * increment the module refcount too. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 0 when successful, EFAULT when fail to bump module refcount > + */ > +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev) > +{ > + if (atomic_add_return(1, &vcrypto_dev->ref_count) == 1) > + if (!try_module_get(vcrypto_dev->owner)) > + return -EFAULT; > + return 0; > +} > + > +/* > + * virtcrypto_dev_put() - Decrement vcrypto_dev reference count > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * Decrement the vcrypto_dev refcount and if this is the last time > + * decrementing it during this period the vcrypto_dev is in use, > + * decrement the module refcount too. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: void > + */ > +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev) > +{ > + if (atomic_sub_return(1, &vcrypto_dev->ref_count) == 0) > + module_put(vcrypto_dev->owner); > +} > + > +/* > + * virtcrypto_dev_started() - Check whether device has started > + * @vcrypto_dev: Pointer to virtio crypto device. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 1 when the device has started, 0 otherwise > + */ > +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev) > +{ > + return (vcrypto_dev->status & VIRTIO_CRYPTO_S_HW_READY); > +} > + > +/* > + * virtcrypto_get_dev_node() - Get vcrypto_dev on the node. > + * @node: Node id the driver works. > + * > + * Function returns the virtio crypto device used fewest on the node. > + * > + * To be used by virtio crypto device specific drivers. > + * > + * Return: pointer to vcrypto_dev or NULL if not found. > + */ > +struct virtio_crypto *virtcrypto_get_dev_node(int node) > +{ > + struct virtio_crypto *vcrypto_dev = NULL, *tmp_dev; > + unsigned long best = ~0; > + unsigned long ctr; > + > + list_for_each_entry(tmp_dev, virtcrypto_devmgr_get_head(), list) { > + > + if ((node == dev_to_node(&tmp_dev->vdev->dev) || > + dev_to_node(&tmp_dev->vdev->dev) < 0) && > + virtcrypto_dev_started(tmp_dev)) { > + ctr = atomic_read(&tmp_dev->ref_count); > + if (best > ctr) { > + vcrypto_dev = tmp_dev; > + best = ctr; > + } > + } > + } > + > + if (!vcrypto_dev) { > + pr_info("virtio_crypto: Could not find a device on node %d\n", > + node); > + /* Get any started device */ > + list_for_each_entry(tmp_dev, > + virtcrypto_devmgr_get_head(), list) { > + if (virtcrypto_dev_started(tmp_dev)) { > + vcrypto_dev = tmp_dev; > + break; > + } > + } > + } > + > + if (!vcrypto_dev) > + return NULL; > + > + virtcrypto_dev_get(vcrypto_dev); > + return vcrypto_dev; > +} > + > +/* > + * virtcrypto_dev_start() - Start virtio crypto device > + * @vcrypto: Pointer to virtio crypto device. > + * > + * Function notifies all the registered services that the virtio crypto device > + * is ready to be used. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: 0 on success, EFAULT when fail to register algorithms > + */ > +int virtcrypto_dev_start(struct virtio_crypto *vcrypto) > +{ > + if (virtio_crypto_algs_register()) { > + pr_err("virtio_crypto: Failed to register crypto algs\n"); > + return -EFAULT; > + } > + > + return 0; > +} > + > +/* > + * virtcrypto_dev_stop() - Stop virtio crypto device > + * @vcrypto: Pointer to virtio crypto device. > + * > + * Function notifies all the registered services that the virtio crypto device > + * is ready to be used. > + * To be used by virtio crypto device specific drivers. > + * > + * Return: void > + */ > +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto) > +{ > + virtio_crypto_algs_unregister(); > +} > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild > index cd2be1c..4bdb84c 100644 > --- a/include/uapi/linux/Kbuild > +++ b/include/uapi/linux/Kbuild > @@ -460,6 +460,7 @@ header-y += virtio_rng.h > header-y += virtio_scsi.h > header-y += virtio_types.h > header-y += virtio_vsock.h > +header-y += virtio_crypto.h > header-y += vm_sockets.h > header-y += vt.h > header-y += vtpm_proxy.h > diff --git a/include/uapi/linux/virtio_crypto.h b/include/uapi/linux/virtio_crypto.h > new file mode 100644 > index 0000000..abc2cf5 > --- /dev/null > +++ b/include/uapi/linux/virtio_crypto.h > @@ -0,0 +1,435 @@ > +#ifndef _VIRTIO_CRYPTO_H > +#define _VIRTIO_CRYPTO_H > +/* This header is BSD licensed so anyone can use the definitions to implement > + * compatible drivers/servers. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions > + * are met: > + * 1. Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * 2. Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in the > + * documentation and/or other materials provided with the distribution. > + * 3. Neither the name of IBM nor the names of its contributors > + * may be used to endorse or promote products derived from this software > + * without specific prior written permission. > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS > + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR > + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND > + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, > + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT > + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF > + * SUCH DAMAGE. > + */ > +#include <linux/types.h> > +#include <linux/virtio_types.h> > +#include <linux/virtio_ids.h> > +#include <linux/virtio_config.h> > + > + > +#define VIRTIO_CRYPTO_SERVICE_CIPHER 0 > +#define VIRTIO_CRYPTO_SERVICE_HASH 1 > +#define VIRTIO_CRYPTO_SERVICE_MAC 2 > +#define VIRTIO_CRYPTO_SERVICE_AEAD 3 > + > +#define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op)) > + > +struct virtio_crypto_ctrl_header { > +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02) > +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03) > +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02) > +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03) > +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02) > +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03) > +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) > +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) > + __le32 opcode; > + __le32 algo; > + __le32 flag; > + /* data virtqueue id */ > + __le32 queue_id; > +}; > + > +struct virtio_crypto_cipher_session_para { > +#define VIRTIO_CRYPTO_NO_CIPHER 0 > +#define VIRTIO_CRYPTO_CIPHER_ARC4 1 > +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2 > +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3 > +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4 > +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5 > +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6 > +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7 > +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8 > +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9 > +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10 > +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11 > +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12 > +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13 > +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14 > + __le32 algo; > + /* length of key */ > + __le32 keylen; > + > +#define VIRTIO_CRYPTO_OP_ENCRYPT 1 > +#define VIRTIO_CRYPTO_OP_DECRYPT 2 > + /* encrypt or decrypt */ > + __le32 op; > + __le32 padding; > +}; > + > +struct virtio_crypto_session_input { > + /* Device-writable part */ > + __le64 session_id; > + __le32 status; > + __le32 padding; > +}; > + > +struct virtio_crypto_cipher_session_req { > + struct virtio_crypto_cipher_session_para para; > +}; > + > +struct virtio_crypto_hash_session_para { > +#define VIRTIO_CRYPTO_NO_HASH 0 > +#define VIRTIO_CRYPTO_HASH_MD5 1 > +#define VIRTIO_CRYPTO_HASH_SHA1 2 > +#define VIRTIO_CRYPTO_HASH_SHA_224 3 > +#define VIRTIO_CRYPTO_HASH_SHA_256 4 > +#define VIRTIO_CRYPTO_HASH_SHA_384 5 > +#define VIRTIO_CRYPTO_HASH_SHA_512 6 > +#define VIRTIO_CRYPTO_HASH_SHA3_224 7 > +#define VIRTIO_CRYPTO_HASH_SHA3_256 8 > +#define VIRTIO_CRYPTO_HASH_SHA3_384 9 > +#define VIRTIO_CRYPTO_HASH_SHA3_512 10 > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11 > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12 > + __le32 algo; > + /* hash result length */ > + __le32 hash_result_len; > +}; > + > +struct virtio_crypto_hash_create_session_req { > + struct virtio_crypto_hash_session_para para; > +}; > + > +struct virtio_crypto_mac_session_para { > +#define VIRTIO_CRYPTO_NO_MAC 0 > +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5 > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6 > +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25 > +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26 > +#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27 > +#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28 > +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41 > +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42 > +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49 > +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50 > +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53 > + __le32 algo; > + /* hash result length */ > + __le32 hash_result_len; > + /* length of authenticated key */ > + __le32 auth_key_len; > + __le32 padding; > +}; > + > +struct virtio_crypto_mac_create_session_req { > + struct virtio_crypto_mac_session_para para; > +}; > + > +struct virtio_crypto_aead_session_para { > +#define VIRTIO_CRYPTO_NO_AEAD 0 > +#define VIRTIO_CRYPTO_AEAD_GCM 1 > +#define VIRTIO_CRYPTO_AEAD_CCM 2 > +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3 > + __le32 algo; > + /* length of key */ > + __le32 key_len; > + /* hash result length */ > + __le32 hash_result_len; > + /* length of the additional authenticated data (AAD) in bytes */ > + __le32 aad_len; > + /* encrypt or decrypt, See above VIRTIO_CRYPTO_OP_* */ > + __le32 op; > + __le32 padding; > +}; > + > +struct virtio_crypto_aead_create_session_req { > + struct virtio_crypto_aead_session_para para; > +}; > + > +struct virtio_crypto_alg_chain_session_para { > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1 > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2 > + __le32 alg_chain_order; > +/* Plain hash */ > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1 > +/* Authenticated hash (mac) */ > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2 > +/* Nested hash */ > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3 > + __le32 hash_mode; > + struct virtio_crypto_cipher_session_para cipher_param; > + union { > + struct virtio_crypto_hash_session_para hash_param; > + struct virtio_crypto_mac_session_para mac_param; > + } u; I personally dislike the use of unions of different size in these structures. For example, using hash_param, there's no way to initialize the trailing part of the structure. Also, the size of the structure is hard to figure out. I would like to see padding of all structures to be same size, and adding a union member that's just padding. Same applies to other unions. > + /* length of the additional authenticated data (AAD) in bytes */ > + __le32 aad_len; > + __le32 padding; > +}; > + > +struct virtio_crypto_alg_chain_session_req { > + struct virtio_crypto_alg_chain_session_para para; > +}; > + > +struct virtio_crypto_sym_create_session_req { > + union { > + struct virtio_crypto_cipher_session_req cipher; > + struct virtio_crypto_alg_chain_session_req chain; > + } u; > + > + /* Device-readable part */ > + > +/* No operation */ > +#define VIRTIO_CRYPTO_SYM_OP_NONE 0 > +/* Cipher only operation on the data */ > +#define VIRTIO_CRYPTO_SYM_OP_CIPHER 1 > +/* > + * Chain any cipher with any hash or mac operation. The order > + * depends on the value of alg_chain_order param > + */ > +#define VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING 2 > + __le32 op_type; > + __le32 padding; > +}; > + > +struct virtio_crypto_destroy_session_req { > + /* Device-readable part */ > + __le64 session_id; > +}; > + > +/* The request of the control viritqueue's packet */ > +struct virtio_crypto_op_ctrl_req { > + struct virtio_crypto_ctrl_header header; > + > + union { > + struct virtio_crypto_sym_create_session_req > + sym_create_session; > + struct virtio_crypto_hash_create_session_req > + hash_create_session; > + struct virtio_crypto_mac_create_session_req > + mac_create_session; > + struct virtio_crypto_aead_create_session_req > + aead_create_session; > + struct virtio_crypto_destroy_session_req > + destroy_session; > + } u; > +}; > + > +struct virtio_crypto_op_header { > +#define VIRTIO_CRYPTO_CIPHER_ENCRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x00) > +#define VIRTIO_CRYPTO_CIPHER_DECRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x01) > +#define VIRTIO_CRYPTO_HASH \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x00) > +#define VIRTIO_CRYPTO_MAC \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x00) > +#define VIRTIO_CRYPTO_AEAD_ENCRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) > +#define VIRTIO_CRYPTO_AEAD_DECRYPT \ > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) > + __le32 opcode; > + /* algo should be service-specific algorithms */ > + __le32 algo; > + /* session_id should be service-specific algorithms */ > + __le64 session_id; > + /* control flag to control the request */ > + __le32 flag; > + __le32 padding; > +}; > + > +struct virtio_crypto_cipher_para { > + /* > + * Byte Length of valid IV/Counter > + * > + * For block ciphers in CBC or F8 mode, or for Kasumi in F8 mode, or for > + * SNOW3G in UEA2 mode, this is the length of the IV (which > + * must be the same as the block length of the cipher). > + * For block ciphers in CTR mode, this is the length of the counter > + * (which must be the same as the block length of the cipher). > + * For AES-XTS, this is the 128bit tweak, i, from IEEE Std 1619-2007. > + * > + * The IV/Counter will be updated after every partial cryptographic > + * operation. > + */ > + __le32 iv_len; > + /* length of source data */ > + __le32 src_data_len; > + /* length of dst data */ > + __le32 dst_data_len; > + __le32 padding; > +}; > + > +struct virtio_crypto_hash_para { > + /* length of source data */ > + __le32 src_data_len; > + /* hash result length */ > + __le32 hash_result_len; > +}; > + > +struct virtio_crypto_mac_para { > + struct virtio_crypto_hash_para hash; > +}; > + > +struct virtio_crypto_aead_para { > + /* > + * Byte Length of valid IV data pointed to by the below iv_addr > + * parameter. > + * > + * For GCM mode, this is either 12 (for 96-bit IVs) or 16, in which > + * case iv_addr points to J0. > + * For CCM mode, this is the length of the nonce, which can be in the > + * range 7 to 13 inclusive. > + */ > + __le32 iv_len; > + /* length of additional auth data */ > + __le32 aad_len; > + /* length of source data */ > + __le32 src_data_len; > + /* length of dst data */ > + __le32 dst_data_len; > +}; > + > +struct virtio_crypto_cipher_data_req { > + /* Device-readable part */ > + struct virtio_crypto_cipher_para para; > +}; > + > +struct virtio_crypto_hash_data_req { > + /* Device-readable part */ > + struct virtio_crypto_hash_para para; > +}; > + > +struct virtio_crypto_mac_data_req { > + /* Device-readable part */ > + struct virtio_crypto_mac_para para; > +}; > + > +struct virtio_crypto_alg_chain_data_para { > + __le32 iv_len; > + /* Length of source data */ > + __le32 src_data_len; > + /* Length of destination data */ > + __le32 dst_data_len; > + /* Starting point for cipher processing in source data */ > + __le32 cipher_start_src_offset; > + /* Length of the source data that the cipher will be computed on */ > + __le32 len_to_cipher; > + /* Starting point for hash processing in source data */ > + __le32 hash_start_src_offset; > + /* Length of the source data that the hash will be computed on */ > + __le32 len_to_hash; > + /* Length of the additional auth data */ > + __le32 aad_len; > + /* Length of the hash result */ > + __le32 hash_result_len; > + __le32 reserved; > +}; > + > +struct virtio_crypto_alg_chain_data_req { > + /* Device-readable part */ > + struct virtio_crypto_alg_chain_data_para para; > +}; > + > +struct virtio_crypto_sym_data_req { > + union { > + struct virtio_crypto_cipher_data_req cipher; > + struct virtio_crypto_alg_chain_data_req chain; > + } u; > + > + /* See above VIRTIO_CRYPTO_SYM_OP_* */ > + __le32 op_type; > + __le32 padding; > +}; > + > +struct virtio_crypto_aead_data_req { > + /* Device-readable part */ > + struct virtio_crypto_aead_para para; > +}; > + > +/* The request of the data viritqueue's packet */ > +struct virtio_crypto_op_data_req { > + struct virtio_crypto_op_header header; > + > + union { > + struct virtio_crypto_sym_data_req sym_req; > + struct virtio_crypto_hash_data_req hash_req; > + struct virtio_crypto_mac_data_req mac_req; > + struct virtio_crypto_aead_data_req aead_req; > + } u; > +}; > + > +#define VIRTIO_CRYPTO_OK 0 > +#define VIRTIO_CRYPTO_ERR 1 > +#define VIRTIO_CRYPTO_BADMSG 2 > +#define VIRTIO_CRYPTO_NOTSUPP 3 > +#define VIRTIO_CRYPTO_INVSESS 4 /* Invaild session id */ > + > +/* The accelerator hardware is ready */ > +#define VIRTIO_CRYPTO_S_HW_READY (1 << 0) > + > +struct virtio_crypto_config { > + /* See VIRTIO_CRYPTO_OP_* above */ > + __le32 status; > + > + /* > + * Maximum number of data queue legal values are between 1 and 0x8000 > + */ > + __le32 max_dataqueues; > + > + /* > + * Specifies the services mask which the devcie support, > + * see VIRTIO_CRYPTO_SERVICE_* above > + */ > + __le32 crypto_services; > + > + /* Detailed algorithms mask */ > + __le32 cipher_algo_l; > + __le32 cipher_algo_h; > + __le32 hash_algo; > + __le32 mac_algo_l; > + __le32 mac_algo_h; > + __le32 aead_algo; > + /* Maximum length of cipher key */ > + __le32 max_cipher_key_len; > + /* Maximum length of authenticated key */ > + __le32 max_auth_key_len; > + __le32 reserve; > + /* Maximum size of each crypto request's content */ > + __le64 max_size; > +}; > + > +struct virtio_crypto_inhdr { > + /* See VIRTIO_CRYPTO_* above */ > + __u8 status; > +}; > +#endif > diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h > index 3228d58..6d5c3b2 100644 > --- a/include/uapi/linux/virtio_ids.h > +++ b/include/uapi/linux/virtio_ids.h > @@ -42,5 +42,6 @@ > #define VIRTIO_ID_GPU 16 /* virtio GPU */ > #define VIRTIO_ID_INPUT 18 /* virtio input */ > #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */ > +#define VIRTIO_ID_CRYPTO 20 /* virtio crypto */ > > #endif /* _LINUX_VIRTIO_IDS_H */ > -- > 1.8.3.1 > ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20161127045532-mutt-send-email-mst@kernel.org>]
* RE: [virtio-dev] Re: [PATCH v2 2/2] crypto: add virtio-crypto driver [not found] ` <20161127045532-mutt-send-email-mst@kernel.org> @ 2016-11-28 4:47 ` Gonglei (Arei) [not found] ` <33183CC9F5247A488A2544077AF19020D97A10EC@SZXEMA503-MBS.china.huawei.com> 1 sibling, 0 replies; 13+ messages in thread From: Gonglei (Arei) @ 2016-11-28 4:47 UTC (permalink / raw) To: Michael S. Tsirkin Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) Hi Michael, > > Subject: [virtio-dev] Re: [PATCH v2 2/2] crypto: add virtio-crypto driver > > On Tue, Nov 22, 2016 at 04:10:23PM +0800, Gonglei wrote: > > This patch introduces virtio-crypto driver for Linux Kernel. > > > > The virtio crypto device is a virtual cryptography device > > as well as a kind of virtual hardware accelerator for > > virtual machines. The encryption anddecryption requests > > are placed in the data queue and are ultimately handled by > > thebackend crypto accelerators. The second queue is the > > control queue used to create or destroy sessions for > > symmetric algorithms and will control some advanced features > > in the future. The virtio crypto device provides the following > > cryptoservices: CIPHER, MAC, HASH, and AEAD. > > > > For more information about virtio-crypto device, please see: > > http://qemu-project.org/Features/VirtioCrypto > > > > CC: Michael S. Tsirkin <mst@redhat.com> > > CC: Cornelia Huck <cornelia.huck@de.ibm.com> > > CC: Stefan Hajnoczi <stefanha@redhat.com> > > CC: Herbert Xu <herbert@gondor.apana.org.au> > > CC: Halil Pasic <pasic@linux.vnet.ibm.com> > > CC: David S. Miller <davem@davemloft.net> > > CC: Zeng Xin <xin.zeng@intel.com> > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > > --- > > MAINTAINERS | 8 + > > drivers/crypto/Kconfig | 2 + > > drivers/crypto/Makefile | 1 + > > drivers/crypto/virtio/Kconfig | 10 + > > drivers/crypto/virtio/Makefile | 5 + > > drivers/crypto/virtio/virtio_crypto.c | 444 > +++++++++++++++++++++++ > > drivers/crypto/virtio/virtio_crypto_algs.c | 524 > +++++++++++++++++++++++++++ > > drivers/crypto/virtio/virtio_crypto_common.h | 124 +++++++ > > drivers/crypto/virtio/virtio_crypto_mgr.c | 258 +++++++++++++ > > include/uapi/linux/Kbuild | 1 + > > include/uapi/linux/virtio_crypto.h | 435 > ++++++++++++++++++++++ > > include/uapi/linux/virtio_ids.h | 1 + > > 12 files changed, 1813 insertions(+) > > create mode 100644 drivers/crypto/virtio/Kconfig > > create mode 100644 drivers/crypto/virtio/Makefile > > create mode 100644 drivers/crypto/virtio/virtio_crypto.c > > create mode 100644 drivers/crypto/virtio/virtio_crypto_algs.c > > create mode 100644 drivers/crypto/virtio/virtio_crypto_common.h > > create mode 100644 drivers/crypto/virtio/virtio_crypto_mgr.c > > create mode 100644 include/uapi/linux/virtio_crypto.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 411e3b8..d6b18bb 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -12844,6 +12844,14 @@ S: Maintained > > F: drivers/virtio/virtio_input.c > > F: include/uapi/linux/virtio_input.h > > > > +VIRTIO CRYPTO DRIVER > > +M: Gonglei <arei.gonglei@huawei.com> > > +L: virtualization@lists.linux-foundation.org > > +L: linux-crypto@vger.kernel.org > > +S: Maintained > > +F: drivers/crypto/virtio/ > > +F: include/uapi/linux/virtio_crypto.h > > + > > VIA RHINE NETWORK DRIVER > > S: Orphan > > F: drivers/net/ethernet/via/via-rhine.c > > diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig > > index 4d2b81f..7956478 100644 > > --- a/drivers/crypto/Kconfig > > +++ b/drivers/crypto/Kconfig > > @@ -555,4 +555,6 @@ config CRYPTO_DEV_ROCKCHIP > > > > source "drivers/crypto/chelsio/Kconfig" > > > > +source "drivers/crypto/virtio/Kconfig" > > + > > endif # CRYPTO_HW > > diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile > > index ad7250f..bc53cb8 100644 > > --- a/drivers/crypto/Makefile > > +++ b/drivers/crypto/Makefile > > @@ -32,3 +32,4 @@ obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/ > > obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/ > > obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/ > > obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/ > > +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/ > > diff --git a/drivers/crypto/virtio/Kconfig b/drivers/crypto/virtio/Kconfig > > new file mode 100644 > > index 0000000..ceae88c > > --- /dev/null > > +++ b/drivers/crypto/virtio/Kconfig > > @@ -0,0 +1,10 @@ > > +config CRYPTO_DEV_VIRTIO > > + tristate "VirtIO crypto driver" > > + depends on VIRTIO > > + select CRYPTO_AEAD > > + select CRYPTO_AUTHENC > > + select CRYPTO_BLKCIPHER > > + default m > > + help > > + This driver provides support for virtio crypto device. If you > > + choose 'M' here, this module will be called virtio-crypto. > > diff --git a/drivers/crypto/virtio/Makefile b/drivers/crypto/virtio/Makefile > > new file mode 100644 > > index 0000000..a316e92 > > --- /dev/null > > +++ b/drivers/crypto/virtio/Makefile > > @@ -0,0 +1,5 @@ > > +obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio-crypto.o > > +virtio-crypto-objs := \ > > + virtio_crypto_algs.o \ > > + virtio_crypto_mgr.o \ > > + virtio_crypto.o > > diff --git a/drivers/crypto/virtio/virtio_crypto.c > b/drivers/crypto/virtio/virtio_crypto.c > > new file mode 100644 > > index 0000000..56fdfed > > --- /dev/null > > +++ b/drivers/crypto/virtio/virtio_crypto.c > > @@ -0,0 +1,444 @@ > > + /* Driver for Virtio crypto device. > > + * > > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > > + */ > > + > > +#include <linux/err.h> > > +#include <linux/module.h> > > +#include <linux/virtio_config.h> > > +#include <linux/cpu.h> > > + > > +#include <uapi/linux/virtio_crypto.h> > > +#include "virtio_crypto_common.h" > > + > > + > > +static void virtcrypto_dataq_callback(struct virtqueue *vq) > > +{ > > + struct virtio_crypto *vcrypto = vq->vdev->priv; > > + struct virtio_crypto_request *vc_req; > > + unsigned long flags; > > + unsigned int len; > > + struct ablkcipher_request *ablk_req; > > + int error; > > + > > + spin_lock_irqsave(&vcrypto->lock, flags); > > + do { > > + virtqueue_disable_cb(vq); > > + while ((vc_req = virtqueue_get_buf(vq, &len)) != NULL) { > > + if (vc_req->type == VIRTIO_CRYPTO_SYM_OP_CIPHER) { > > + switch (vc_req->status) { > > + case VIRTIO_CRYPTO_OK: > > + error = 0; > > + break; > > + case VIRTIO_CRYPTO_INVSESS: > > + case VIRTIO_CRYPTO_ERR: > > + error = -EINVAL; > > + break; > > + case VIRTIO_CRYPTO_BADMSG: > > + error = -EBADMSG; > > + break; > > + default: > > + error = -EIO; > > + break; > > + } > > + ablk_req = vc_req->ablkcipher_req; > > + /* Finish the encrypt or decrypt process */ > > + ablk_req->base.complete(&ablk_req->base, error); > > + } > > + > > + kfree(vc_req->req_data); > > + kfree(vc_req->sgs); > > + } > > + } while (!virtqueue_enable_cb(vq)); > > + spin_unlock_irqrestore(&vcrypto->lock, flags); > > +} > > + > > +static int virtcrypto_find_vqs(struct virtio_crypto *vi) > > +{ > > + vq_callback_t **callbacks; > > + struct virtqueue **vqs; > > + int ret = -ENOMEM; > > + int i, total_vqs; > > + const char **names; > > + > > + /* We expect 1 data virtqueue, followed by > > + * possible N-1 data queues used in multiqueue mode, followed by > > + * control vq. > > + */ > > + total_vqs = vi->max_data_queues + 1; > > + > > + /* Allocate space for find_vqs parameters */ > > + vqs = kcalloc(total_vqs, sizeof(*vqs), GFP_KERNEL); > > + if (!vqs) > > + goto err_vq; > > + callbacks = kcalloc(total_vqs, sizeof(*callbacks), GFP_KERNEL); > > + if (!callbacks) > > + goto err_callback; > > + names = kcalloc(total_vqs, sizeof(*names), GFP_KERNEL); > > + if (!names) > > + goto err_names; > > + > > + /* Parameters for control virtqueue */ > > + callbacks[total_vqs - 1] = NULL; > > + names[total_vqs - 1] = "controlq"; > > + > > + /* Allocate/initialize parameters for data virtqueues */ > > + for (i = 0; i < vi->max_data_queues; i++) { > > + callbacks[i] = virtcrypto_dataq_callback; > > + snprintf(vi->data_vq[i].name, sizeof(vi->data_vq[i].name), > > + "dataq.%d", i); > > + names[i] = vi->data_vq[i].name; > > + } > > + > > + ret = vi->vdev->config->find_vqs(vi->vdev, total_vqs, vqs, callbacks, > > + names); > > + if (ret) > > + goto err_find; > > + > > + vi->ctrl_vq = vqs[total_vqs - 1]; > > + > > + for (i = 0; i < vi->max_data_queues; i++) > > + vi->data_vq[i].vq = vqs[i]; > > + > > + kfree(names); > > + kfree(callbacks); > > + kfree(vqs); > > + > > + return 0; > > + > > +err_find: > > + kfree(names); > > +err_names: > > + kfree(callbacks); > > +err_callback: > > + kfree(vqs); > > +err_vq: > > + return ret; > > +} > > + > > +static int virtcrypto_alloc_queues(struct virtio_crypto *vi) > > +{ > > + vi->data_vq = kcalloc(vi->max_data_queues, sizeof(*vi->data_vq), > > + GFP_KERNEL); > > + if (!vi->data_vq) > > + return -ENOMEM; > > + > > + return 0; > > +} > > + > > +static void virtcrypto_clean_affinity(struct virtio_crypto *vi, long hcpu) > > +{ > > + int i; > > + > > + if (vi->affinity_hint_set) { > > + for (i = 0; i < vi->max_data_queues; i++) > > + virtqueue_set_affinity(vi->data_vq[i].vq, -1); > > + > > + vi->affinity_hint_set = false; > > + } > > +} > > + > > +static void virtcrypto_set_affinity(struct virtio_crypto *vi) > > +{ > > + int i; > > + int cpu; > > + > > + /* > > + * In multiqueue mode, when the number of cpu is equal to the number > > + * of queue, we let the queue to be private to one cpu by > > + * setting the affinity hint to eliminate the contention. > > + */ > > + if (vi->curr_queue == 1 || > > + vi->max_data_queues != num_online_cpus()) { > > + virtcrypto_clean_affinity(vi, -1); > > + return; > > + } > > + > > So how can you handle cpu hotplug then? > I would imagine making max_data_queues > num_online_cpus > and initializing just the required number would be > a saner way. > It makes sense. > > + i = 0; > > + for_each_online_cpu(cpu) { > > + virtqueue_set_affinity(vi->data_vq[i].vq, cpu); > > + i++; > > + } > > + > > + vi->affinity_hint_set = true; > > +} > > + > > Above is racy in prsence of cpu hotplug. Is there a userspace > interface to fix up affinity after hotplug? Not yet. > If not you need to get notified after hotplug and > fix it up yourself. > I'll inspect it. > > +static void virtcrypto_free_queues(struct virtio_crypto *vi) > > +{ > > + kfree(vi->data_vq); > > +} > > + > > +static int virtcrypto_init_vqs(struct virtio_crypto *vi) > > +{ > > + int ret; > > + > > + /* Allocate send & receive queues */ > > + ret = virtcrypto_alloc_queues(vi); > > + if (ret) > > + goto err; > > + > > + ret = virtcrypto_find_vqs(vi); > > + if (ret) > > + goto err_free; > > + > > + get_online_cpus(); > > + virtcrypto_set_affinity(vi); > > + put_online_cpus(); > > + > > + return 0; > > + > > +err_free: > > + virtcrypto_free_queues(vi); > > +err: > > + return ret; > > +} > > + > > +static int virtcrypto_update_status(struct virtio_crypto *vcrypto) > > +{ > > + __le32 status_le; > > + u32 status; > > + int err; > > + > > + status_le = virtio_cread32_le(vcrypto->vdev, > > + offsetof(struct virtio_crypto_config, status)); > > + status = le32_to_cpu(status_le); > > + > > + /* Ignore unknown (future) status bits */ > > + status &= VIRTIO_CRYPTO_S_HW_READY; > > + > > + if (vcrypto->status == status) > > + return 0; > > + > > + vcrypto->status = status; > > + > > + if (vcrypto->status & VIRTIO_CRYPTO_S_HW_READY) { > > + err = virtcrypto_dev_start(vcrypto); > > + if (err) { > > + dev_err(&vcrypto->vdev->dev, > > + "Failed to start virtio crypto device.\n"); > > + virtcrypto_dev_stop(vcrypto); > > + return -1; > > + } > > + dev_info(&vcrypto->vdev->dev, "Accelerator is ready\n"); > > + } else { > > + virtcrypto_dev_stop(vcrypto); > > + dev_info(&vcrypto->vdev->dev, "Accelerator is not ready\n"); > > + } > > + > > + return 0; > > +} > > + > > +static void virtcrypto_del_vqs(struct virtio_crypto *vcrypto) > > +{ > > + struct virtio_device *vdev = vcrypto->vdev; > > + > > + virtcrypto_clean_affinity(vcrypto, -1); > > + > > + vdev->config->del_vqs(vdev); > > + > > + virtcrypto_free_queues(vcrypto); > > +} > > + > > +static int virtcrypto_probe(struct virtio_device *vdev) > > +{ > > + int err = -EFAULT; > > + struct virtio_crypto *vcrypto; > > + __le32 max_data_queues_le = 0, max_cipher_key_len_le = 0; > > + __le32 max_auth_key_len_le = 0; > > + __le64 max_size_le = 0; > > + > > Pls validate that it's a modern device (has VERSION_1 set). > We should find a way to do it in a central place, > but we don't have that now. > So what I will do is add a VERSION_1 feature bit checking at the beginning of the probe function: if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) return -ENODEV; > > + if (!vdev->config->get) { > > + dev_err(&vdev->dev, "%s failure: config access disabled\n", > > + __func__); > > + return -EINVAL; > > + } > > + > > + if (num_possible_nodes() > 1 && dev_to_node(&vdev->dev) < 0) { > > + /* > > + * If the accelerator is connected to a node with no memory > > + * there is no point in using the accelerator since the remote > > + * memory transaction will be very slow. > > + */ > > + dev_err(&vdev->dev, "Invalid NUMA configuration.\n"); > > + return -EINVAL; > > + } > > + > > + vcrypto = kzalloc_node(sizeof(*vcrypto), GFP_KERNEL, > > + dev_to_node(&vdev->dev)); > > + if (!vcrypto) > > + return -ENOMEM; > > + > > + max_data_queues_le = virtio_cread32_le(vdev, > > + offsetof(struct virtio_crypto_config, max_dataqueues)); > > + vcrypto->max_data_queues = le32_to_cpu(max_data_queues_le); > > + if (vcrypto->max_data_queues < 1) > > + vcrypto->max_data_queues = 1; > > + > > + dev_info(&vdev->dev, "max_queues: %u\n", vcrypto->max_data_queues); > > + > > + max_cipher_key_len_le = virtio_cread32_le(vdev, > > + offsetof(struct virtio_crypto_config, max_cipher_key_len)); > > + max_auth_key_len_le = virtio_cread32_le(vdev, > > + offsetof(struct virtio_crypto_config, max_auth_key_len)); > > + max_size_le = virtio_cread64_le(vdev, > > + offsetof(struct virtio_crypto_config, max_size)); > > + > > + /* Add virtio crypto device to global table */ > > + err = virtcrypto_devmgr_add_dev(vcrypto); > > + if (err) { > > + dev_err(&vdev->dev, "Failed to add new virtio crypto device.\n"); > > + goto free; > > + } > > + vcrypto->owner = THIS_MODULE; > > + vcrypto = vdev->priv = vcrypto; > > + vcrypto->vdev = vdev; > > + spin_lock_init(&vcrypto->lock); > > + spin_lock_init(&vcrypto->ctrl_lock); > > + > > + /* Use sigle data queue as default */ > > + vcrypto->curr_queue = 1; > > + vcrypto->max_cipher_key_len = le32_to_cpu(max_cipher_key_len_le); > > + vcrypto->max_auth_key_len = le32_to_cpu(max_auth_key_len_le); > > + vcrypto->max_size = le64_to_cpu(max_size_le); > > + > > + err = virtcrypto_init_vqs(vcrypto); > > + if (err) { > > + dev_err(&vdev->dev, "Failed to initialize vqs.\n"); > > + goto free_dev; > > + } > > + virtio_device_ready(vdev); > > + > > + err = virtcrypto_update_status(vcrypto); > > + if (err) { > > + err = -EFAULT; > > Why EFAULT? > I wanted to keep the same with err's initial value. Maybe I shouldn't change the err here but directly assign value in virtcrypto_update_status(). EPERM is better. > > + goto free_vqs; > > + } > > + > > + return 0; > > + > > +free_vqs: > > + virtcrypto_del_vqs(vcrypto); > > as you called virtio_device_ready this is likely unsafe > unless you first reset device or make sure there are > no interrupts in some other way. > Good catch. Will add reset operations. > > +free_dev: > > + virtcrypto_devmgr_rm_dev(vcrypto); > > +free: > > + kfree(vcrypto); > > + return err; > > +} > > + > > +static void virtcrypto_free_unused_reqs(struct virtio_crypto *vcrypto) > > +{ > > + struct virtio_crypto_request *vc_req; > > + int i; > > + struct virtqueue *vq; > > + > > + for (i = 0; i < vcrypto->max_data_queues; i++) { > > + vq = vcrypto->data_vq[i].vq; > > + while ((vc_req = virtqueue_detach_unused_buf(vq)) != NULL) { > > + kfree(vc_req->req_data); > > + kfree(vc_req->sgs); > > + } > > + } > > +} > > + > > +static void virtcrypto_remove(struct virtio_device *vdev) > > +{ > > + struct virtio_crypto *vcrypto = vdev->priv; > > + > > + dev_info(&vdev->dev, "Start virtcrypto_remove.\n"); > > + > > + if (virtcrypto_dev_started(vcrypto)) > > + virtcrypto_dev_stop(vcrypto); > > + vdev->config->reset(vdev); > > + virtcrypto_free_unused_reqs(vcrypto); > > + virtcrypto_del_vqs(vcrypto); > > + virtcrypto_devmgr_rm_dev(vcrypto); > > + kfree(vcrypto); > > +} > > + > > +static void virtcrypto_config_changed(struct virtio_device *vdev) > > +{ > > + struct virtio_crypto *vcrypto = vdev->priv; > > + > > + virtcrypto_update_status(vcrypto); > > +} > > + > > +#ifdef CONFIG_PM_SLEEP > > +static int virtcrypto_freeze(struct virtio_device *vdev) > > +{ > > + struct virtio_crypto *vcrypto = vdev->priv; > > + unsigned long flags; > > + > > + virtcrypto_free_unused_reqs(vcrypto); > > + spin_lock_irqsave(&vcrypto->lock, flags); > > + if (virtcrypto_dev_started(vcrypto)) > > + virtcrypto_dev_stop(vcrypto); > > This is taking mutex locks under a spinlock. > Highly unlikely to work. Try this with lockdep > enabled. > Good catch, will do and inspect the necessity of the spin_lock here as well. > > > + spin_unlock_irqrestore(&vcrypto->lock, flags); > > + > > + virtcrypto_del_vqs(vcrypto); > > + return 0; > > +} > > + > > +static int virtcrypto_restore(struct virtio_device *vdev) > > +{ > > + struct virtio_crypto *vcrypto = vdev->priv; > > + int err; > > + > > + err = virtcrypto_init_vqs(vcrypto); > > + if (err) > > + return err; > > + > > + virtio_device_ready(vdev); > > + err = virtcrypto_dev_start(vcrypto); > > + if (err) { > > + dev_err(&vdev->dev, "Failed to start virtio crypto device.\n"); > > + return -EFAULT; > > + } > > + > > + return 0; > > +} > > +#endif > > + > > + > > +static unsigned int features[] = { > > + /* none */ > > +}; > > + > > +static struct virtio_device_id id_table[] = { > > + { VIRTIO_ID_CRYPTO, VIRTIO_DEV_ANY_ID }, > > + { 0 }, > > +}; > > + > > +static struct virtio_driver virtio_crypto_driver = { > > + .driver.name = KBUILD_MODNAME, > > + .driver.owner = THIS_MODULE, > > + .feature_table = features, > > + .feature_table_size = ARRAY_SIZE(features), > > + .id_table = id_table, > > + .probe = virtcrypto_probe, > > + .remove = virtcrypto_remove, > > + .config_changed = virtcrypto_config_changed, > > +#ifdef CONFIG_PM_SLEEP > > + .freeze = virtcrypto_freeze, > > + .restore = virtcrypto_restore, > > +#endif > > +}; > > + > > +module_virtio_driver(virtio_crypto_driver); > > + > > +MODULE_DEVICE_TABLE(virtio, id_table); > > +MODULE_DESCRIPTION("virtio crypto device driver"); > > +MODULE_LICENSE("GPL"); > > +MODULE_AUTHOR("Gonglei <arei.gonglei@huawei.com>"); > > diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c > b/drivers/crypto/virtio/virtio_crypto_algs.c > > new file mode 100644 > > index 0000000..7b57584 > > --- /dev/null > > +++ b/drivers/crypto/virtio/virtio_crypto_algs.c > > @@ -0,0 +1,524 @@ > > + /* Algorithms supported by virtio crypto device > > + * > > + * Authors: Gonglei <arei.gonglei@huawei.com> > > + * > > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > > + */ > > + > > +#include <linux/scatterlist.h> > > +#include <crypto/algapi.h> > > +#include <linux/err.h> > > +#include <crypto/scatterwalk.h> > > +#include <linux/atomic.h> > > + > > +#include <uapi/linux/virtio_crypto.h> > > +#include "virtio_crypto_common.h" > > + > > +static DEFINE_MUTEX(algs_lock); > > +static unsigned int virtio_crypto_active_devs; > > + > > +static u64 virtio_crypto_alg_sg_nents_length(struct scatterlist *sg) > > +{ > > + u64 total = 0; > > + > > + for (total = 0; sg; sg = sg_next(sg)) > > + total += sg->length; > > + > > + return total; > > +} > > + > > +static int virtio_crypto_alg_validate_key(int key_len, int *alg) > > +{ > > + switch (key_len) { > > + case AES_KEYSIZE_128: > > + case AES_KEYSIZE_192: > > + case AES_KEYSIZE_256: > > + *alg = VIRTIO_CRYPTO_CIPHER_AES_CBC; > > + break; > > + default: > > + return -EINVAL; > > + } > > + return 0; > > +} > > + > > +static int virtio_crypto_alg_ablkcipher_init_session( > > + struct virtio_crypto_ablkcipher_ctx *ctx, > > + int alg, const uint8_t *key, > > + unsigned int keylen, > > + int encrypt) > > +{ > > + struct scatterlist outhdr, key_sg, inhdr, *sgs[3]; > > + unsigned int tmp; > > + struct virtio_crypto *vcrypto = ctx->vcrypto; > > + int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : > VIRTIO_CRYPTO_OP_DECRYPT; > > + int err; > > + unsigned int num_out = 0, num_in = 0; > > + > > + /* > > + * Avoid to do DMA from the stack, switch to using > > + * dynamically-allocated for the key > > + */ > > + uint8_t *cipher_key = kmalloc(keylen, GFP_ATOMIC); > > Is all crypto using GFP_ATOMIC like this? > Is there code that recovers if this fails? > The crypto subsystem has a flag named CRYPTO_TFM_REQ_MAY_SLEEP to decide to use GFP_KERENL or GFP_ATOMIC. We don't set the flag for virtio-crypto device, so I use GFP_ATOMIC likes qat_alg.c > > > + > > + if (!cipher_key) > > + return -ENOMEM; > > + > > + memcpy(cipher_key, key, keylen); > > + > > + spin_lock(&vcrypto->ctrl_lock); > > + /* Pad ctrl header */ > > + vcrypto->ctrl.header.opcode = > > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); > > + vcrypto->ctrl.header.algo = cpu_to_le32((uint32_t)alg); > > why cast here? > Will change the type of alg at the beginning of definition, remove the cast as well. > > + /* Set the default dataqueue id to 0 */ > > + vcrypto->ctrl.header.queue_id = 0; > > + > > + vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); > > + /* Pad cipher's parameters */ > > + vcrypto->ctrl.u.sym_create_session.op_type = > > + cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = > > + vcrypto->ctrl.header.algo; > > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = > > + cpu_to_le32(keylen); > > + vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = > > + cpu_to_le32(op); > > + > > + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > > + sgs[num_out++] = &outhdr; > > + > > + /* Set key */ > > + sg_init_one(&key_sg, cipher_key, keylen); > > + sgs[num_out++] = &key_sg; > > + > > + /* Return status and session id back */ > > + sg_init_one(&inhdr, &vcrypto->input, sizeof(vcrypto->input)); > > + sgs[num_out + num_in++] = &inhdr; > > + > > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > > + num_in, vcrypto, GFP_ATOMIC); > > + if (err < 0) { > > + spin_unlock(&vcrypto->ctrl_lock); > > + kfree(cipher_key); > > + return err; > > + } > > + virtqueue_kick(vcrypto->ctrl_vq); > > + > > + /* > > + * Spin for a response, the kick causes an ioport write, trapping > > + * into the hypervisor, so the request should be handled immediately. > > + */ > > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > > + cpu_relax(); > > + > > + if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { > > + spin_unlock(&vcrypto->ctrl_lock); > > + pr_err("virtio_crypto: Create session failed status: %u\n", > > + le32_to_cpu(vcrypto->input.status)); > > + kfree(cipher_key); > > + return -EINVAL; > > + } > > + spin_unlock(&vcrypto->ctrl_lock); > > + > > + spin_lock(&ctx->lock); > > + if (encrypt) > > + ctx->enc_sess_info.session_id = > > + le64_to_cpu(vcrypto->input.session_id); > > + else > > + ctx->dec_sess_info.session_id = > > + le64_to_cpu(vcrypto->input.session_id); > > + spin_unlock(&ctx->lock); > > + > > + kfree(cipher_key); > > + return 0; > > +} > > + > > +static int virtio_crypto_alg_ablkcipher_close_session( > > + struct virtio_crypto_ablkcipher_ctx *ctx, > > + int encrypt) > > +{ > > + struct scatterlist outhdr, status_sg, *sgs[2]; > > + unsigned int tmp; > > + struct virtio_crypto_destroy_session_req *destroy_session; > > + struct virtio_crypto *vcrypto = ctx->vcrypto; > > + int err; > > + unsigned int num_out = 0, num_in = 0; > > + > > + spin_lock(&vcrypto->ctrl_lock); > > + vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; > > + /* Pad ctrl header */ > > + vcrypto->ctrl.header.opcode = > > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); > > + /* Set the default virtqueue id to 0 */ > > + vcrypto->ctrl.header.queue_id = 0; > > + > > + destroy_session = &vcrypto->ctrl.u.destroy_session; > > + > > + if (encrypt) > > + destroy_session->session_id = > > + cpu_to_le64(ctx->enc_sess_info.session_id); > > + else > > + destroy_session->session_id = > > + cpu_to_le64(ctx->dec_sess_info.session_id); > > + > > + sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); > > + sgs[num_out++] = &outhdr; > > + > > + /* Return status and session id back */ > > + sg_init_one(&status_sg, &vcrypto->ctrl_status.status, > > + sizeof(vcrypto->ctrl_status.status)); > > + sgs[num_out + num_in++] = &status_sg; > > + > > + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, > > + num_in, vcrypto, GFP_ATOMIC); > > + if (err < 0) { > > + spin_unlock(&vcrypto->ctrl_lock); > > + return err; > > + } > > + virtqueue_kick(vcrypto->ctrl_vq); > > + > > + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && > > + !virtqueue_is_broken(vcrypto->ctrl_vq)) > > + cpu_relax(); > > + > > + if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { > > + spin_unlock(&vcrypto->ctrl_lock); > > + pr_err("virtio_crypto: Close session failed status: %u, session_id: > 0x%llx\n", > > + vcrypto->ctrl_status.status, > > + destroy_session->session_id); > > + > > + return -EINVAL; > > + } > > + spin_unlock(&vcrypto->ctrl_lock); > > + > > + return 0; > > +} > > + > > +static int virtio_crypto_alg_ablkcipher_init_sessions( > > + struct virtio_crypto_ablkcipher_ctx *ctx, > > + const uint8_t *key, unsigned int keylen) > > +{ > > + int alg; > > + int ret; > > + struct virtio_crypto *vcrypto = ctx->vcrypto; > > + > > + if (keylen > vcrypto->max_cipher_key_len) { > > + pr_err("virtio_crypto: the key is too long\n"); > > + goto bad_key; > > + } > > + > > + if (virtio_crypto_alg_validate_key(keylen, &alg)) > > + goto bad_key; > > + > > + /* Create encryption session */ > > + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, > > + alg, key, keylen, 1); > > + if (ret) > > + return ret; > > + /* Create decryption session */ > > + ret = virtio_crypto_alg_ablkcipher_init_session(ctx, > > + alg, key, keylen, 0); > > + if (ret) { > > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > > + return ret; > > + } > > + return 0; > > + > > +bad_key: > > + crypto_tfm_set_flags(ctx->tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); > > + return -EINVAL; > > +} > > + > > +/* Note: kernel crypto API realization */ > > +static int virtio_crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm, > > + const uint8_t *key, > > + unsigned int keylen) > > +{ > > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(tfm); > > + int ret; > > + > > + spin_lock(&ctx->lock); > > + > > + if (!ctx->vcrypto) { > > + /* New key */ > > + int node = virtio_crypto_get_current_node(); > > + struct virtio_crypto *vcrypto = > > + virtcrypto_get_dev_node(node); > > + if (!vcrypto) { > > + vcrypto = virtcrypto_devmgr_get_first(); > > + if (!vcrypto) { > > + pr_err("virtio_crypto: Could not find a virtio device in the > system"); > > + spin_unlock(&ctx->lock); > > + return -ENODEV; > > + } > > + } > > + > > + ctx->vcrypto = vcrypto; > > + } > > + spin_unlock(&ctx->lock); > > + > > + ret = virtio_crypto_alg_ablkcipher_init_sessions(ctx, key, keylen); > > + if (ret) { > > + virtcrypto_dev_put(ctx->vcrypto); > > + ctx->vcrypto = NULL; > > + > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int > > +__virtio_crypto_ablkcipher_do_req(struct virtio_crypto_request *vc_req, > > + struct ablkcipher_request *req, > > + struct data_queue *data_vq, > > + __u8 op) > > +{ > > + struct virtio_crypto_ablkcipher_ctx *ctx = vc_req->ablkcipher_ctx; > > + struct virtio_crypto *vcrypto = ctx->vcrypto; > > + struct virtio_crypto_op_data_req *req_data; > > + int src_nents, dst_nents; > > + int err; > > + unsigned long flags; > > + struct scatterlist outhdr, iv_sg, status_sg, **sgs; > > + int i; > > + u64 dst_len; > > + unsigned int num_out = 0, num_in = 0; > > + int sg_total; > > + > > + src_nents = sg_nents_for_len(req->src, req->nbytes); > > + dst_nents = sg_nents(req->dst); > > + > > + pr_debug("virtio_crypto: Number of sgs (src_nents: %d, > dst_nents: %d)\n", > > + src_nents, dst_nents); > > + > > + /* Why 3? outhdr + iv + inhdr */ > > + sg_total = src_nents + dst_nents + 3; > > + sgs = kzalloc_node(sg_total * sizeof(*sgs), GFP_ATOMIC, > > + dev_to_node(&vcrypto->vdev->dev)); > > + if (!sgs) > > + return -ENOMEM; > > + > > + req_data = kzalloc_node(sizeof(*req_data), GFP_ATOMIC, > > + dev_to_node(&vcrypto->vdev->dev)); > > + if (!req_data) { > > + kfree(sgs); > > + return -ENOMEM; > > + } > > + > > + vc_req->req_data = req_data; > > + vc_req->type = VIRTIO_CRYPTO_SYM_OP_CIPHER; > > + /* Head of operation */ > > + if (op) { > > + req_data->header.session_id = > > + cpu_to_le64(ctx->enc_sess_info.session_id); > > + req_data->header.opcode = > > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_ENCRYPT); > > + } else { > > + req_data->header.session_id = > > + cpu_to_le64(ctx->dec_sess_info.session_id); > > + req_data->header.opcode = > > + cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DECRYPT); > > + } > > + req_data->u.sym_req.op_type = > cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); > > + req_data->u.sym_req.u.cipher.para.iv_len = > cpu_to_le32(AES_BLOCK_SIZE); > > + req_data->u.sym_req.u.cipher.para.src_data_len = > > + cpu_to_le32(req->nbytes); > > + > > + dst_len = virtio_crypto_alg_sg_nents_length(req->dst); > > + if (unlikely(dst_len > U32_MAX)) { > > + pr_err("virtio_crypto: The dst_len is beyond U32_MAX\n"); > > + err = -EINVAL; > > + goto free; > > + } > > + > > + pr_debug("virtio_crypto: src_len: %u, dst_len: %llu\n", > > + req->nbytes, dst_len); > > + > > + if (unlikely(req->nbytes + dst_len + AES_BLOCK_SIZE + > > + sizeof(vc_req->status) > vcrypto->max_size)) { > > + pr_err("virtio_crypto: The length is too big\n"); > > + err = -EINVAL; > > + goto free; > > + } > > + > > + req_data->u.sym_req.u.cipher.para.dst_data_len = > > + cpu_to_le32((uint32_t)dst_len); > > + > > + /* Outhdr */ > > + sg_init_one(&outhdr, req_data, sizeof(*req_data)); > > + sgs[num_out++] = &outhdr; > > + > > + /* IV */ > > + sg_init_one(&iv_sg, req->info, AES_BLOCK_SIZE); > > + sgs[num_out++] = &iv_sg; > > + > > + /* Source data */ > > + for (i = 0; i < src_nents; i++) > > + sgs[num_out++] = &req->src[i]; > > + > > + /* Destination data */ > > + for (i = 0; i < dst_nents; i++) > > + sgs[num_out + num_in++] = &req->dst[i]; > > + > > + /* Status */ > > + sg_init_one(&status_sg, &vc_req->status, sizeof(vc_req->status)); > > + sgs[num_out + num_in++] = &status_sg; > > + > > + vc_req->sgs = sgs; > > + > > + spin_lock_irqsave(&vcrypto->lock, flags); > > + err = virtqueue_add_sgs(data_vq->vq, sgs, num_out, > > + num_in, vc_req, GFP_ATOMIC); > > + spin_unlock_irqrestore(&vcrypto->lock, flags); > > + if (unlikely(err < 0)) > > + goto free; > > + > > + return 0; > > + > > +free: > > + kfree(req_data); > > + kfree(sgs); > > + return err; > > +} > > + > > +static int virtio_crypto_ablkcipher_encrypt(struct ablkcipher_request *req) > > +{ > > + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); > > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); > > + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); > > + struct virtio_crypto *vcrypto = ctx->vcrypto; > > + int ret; > > + /* Use the first data virtqueue as default */ > > + struct data_queue *data_vq = &vcrypto->data_vq[0]; > > + > > + vc_req->ablkcipher_ctx = ctx; > > + vc_req->ablkcipher_req = req; > > + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 1); > > + if (ret < 0) { > > + pr_err("virtio_crypto: Encryption failed!\n"); > > + return ret; > > + } > > + virtqueue_kick(data_vq->vq); > > + > > + return -EINPROGRESS; > > +} > > + > > +static int virtio_crypto_ablkcipher_decrypt(struct ablkcipher_request *req) > > +{ > > + struct crypto_ablkcipher *atfm = crypto_ablkcipher_reqtfm(req); > > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_ablkcipher_ctx(atfm); > > + struct virtio_crypto_request *vc_req = ablkcipher_request_ctx(req); > > + struct virtio_crypto *vcrypto = ctx->vcrypto; > > + int ret; > > + /* Use the first data virtqueue as default */ > > + struct data_queue *data_vq = &vcrypto->data_vq[0]; > > + > > + vc_req->ablkcipher_ctx = ctx; > > + vc_req->ablkcipher_req = req; > > + > > + ret = __virtio_crypto_ablkcipher_do_req(vc_req, req, data_vq, 0); > > + if (ret < 0) { > > + pr_err("virtio_crypto: Decryption failed!\n"); > > + return ret; > > + } > > + virtqueue_kick(data_vq->vq); > > + > > + return -EINPROGRESS; > > +} > > + > > +static int virtio_crypto_ablkcipher_init(struct crypto_tfm *tfm) > > +{ > > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); > > + > > + spin_lock_init(&ctx->lock); > > + tfm->crt_ablkcipher.reqsize = sizeof(struct virtio_crypto_request); > > + ctx->tfm = tfm; > > + > > + return 0; > > +} > > + > > +static void virtio_crypto_ablkcipher_exit(struct crypto_tfm *tfm) > > +{ > > + struct virtio_crypto_ablkcipher_ctx *ctx = crypto_tfm_ctx(tfm); > > + > > + if (!ctx->vcrypto) > > + return; > > + > > + virtio_crypto_alg_ablkcipher_close_session(ctx, 1); > > + virtio_crypto_alg_ablkcipher_close_session(ctx, 0); > > + virtcrypto_dev_put(ctx->vcrypto); > > + ctx->vcrypto = NULL; > > +} > > + > > +static struct crypto_alg virtio_crypto_algs[] = { { > > + .cra_name = "cbc(aes)", > > + .cra_driver_name = "virtio_crypto_aes_cbc", > > + .cra_priority = 4001, > > + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC, > > + .cra_blocksize = AES_BLOCK_SIZE, > > + .cra_ctxsize = sizeof(struct virtio_crypto_ablkcipher_ctx), > > + .cra_alignmask = 0, > > + .cra_module = THIS_MODULE, > > + .cra_type = &crypto_ablkcipher_type, > > + .cra_init = virtio_crypto_ablkcipher_init, > > + .cra_exit = virtio_crypto_ablkcipher_exit, > > + .cra_u = { > > + .ablkcipher = { > > + .setkey = virtio_crypto_ablkcipher_setkey, > > + .decrypt = virtio_crypto_ablkcipher_decrypt, > > + .encrypt = virtio_crypto_ablkcipher_encrypt, > > + .min_keysize = AES_MIN_KEY_SIZE, > > + .max_keysize = AES_MAX_KEY_SIZE, > > + .ivsize = AES_BLOCK_SIZE, > > + }, > > + }, > > +} }; > > + > > +int virtio_crypto_algs_register(void) > > +{ > > + int ret = 0, i; > > + > > + mutex_lock(&algs_lock); > > + if (++virtio_crypto_active_devs != 1) > > + goto unlock; > > + > > + for (i = 0; i < ARRAY_SIZE(virtio_crypto_algs); i++) { > > + virtio_crypto_algs[i].cra_flags = > > + CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC; > > + } > > + > > + ret = crypto_register_algs(virtio_crypto_algs, > > + ARRAY_SIZE(virtio_crypto_algs)); > > + > > +unlock: > > + mutex_unlock(&algs_lock); > > + return ret; > > +} > > + > > +void virtio_crypto_algs_unregister(void) > > +{ > > + mutex_lock(&algs_lock); > > + if (--virtio_crypto_active_devs != 0) > > + goto unlock; > > + > > + crypto_unregister_algs(virtio_crypto_algs, > > + ARRAY_SIZE(virtio_crypto_algs)); > > + > > +unlock: > > + mutex_unlock(&algs_lock); > > +} > > diff --git a/drivers/crypto/virtio/virtio_crypto_common.h > b/drivers/crypto/virtio/virtio_crypto_common.h > > new file mode 100644 > > index 0000000..a599733 > > --- /dev/null > > +++ b/drivers/crypto/virtio/virtio_crypto_common.h > > @@ -0,0 +1,124 @@ > > +/* Common header for Virtio crypto device. > > + * > > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > > + */ > > + > > +#ifndef _VIRITO_CRYPTO_COMMON_H > > +#define _VIRITO_CRYPTO_COMMON_H > > + > > +#include <linux/virtio.h> > > +#include <linux/crypto.h> > > +#include <linux/spinlock.h> > > +#include <crypto/aead.h> > > +#include <crypto/aes.h> > > +#include <crypto/authenc.h> > > + > > + > > +/* Internal representation of a data virtqueue */ > > +struct data_queue { > > + /* Virtqueue associated with this send _queue */ > > + struct virtqueue *vq; > > + > > + /* Name of the tx queue: dataq.$index */ > > + char name[32]; > > +}; > > + > > +struct virtio_crypto { > > + struct virtio_device *vdev; > > + struct virtqueue *ctrl_vq; > > + struct data_queue *data_vq; > > + > > + /* To protect the vq operations for the dataq */ > > + spinlock_t lock; > > + > > + /* To protect the vq operations for the controlq */ > > + spinlock_t ctrl_lock; > > + > > + /* Maximum of data queues supported by the device */ > > + u32 max_data_queues; > > + > > + /* Number of queue currently used by the driver */ > > + u32 curr_queue; > > + > > + /* Maximum length of cipher key */ > > + u32 max_cipher_key_len; > > + /* Maximum length of authenticated key */ > > + u32 max_auth_key_len; > > + /* Maximum size of per request */ > > + u64 max_size; > > + > > + /* Control VQ buffers: protected by the ctrl_lock */ > > + struct virtio_crypto_op_ctrl_req ctrl; > > + struct virtio_crypto_session_input input; > > + struct virtio_crypto_inhdr ctrl_status; > > + > > + unsigned long status; > > + atomic_t ref_count; > > + struct list_head list; > > + struct module *owner; > > + uint8_t dev_id; > > + > > + /* Does the affinity hint is set for virtqueues? */ > > + bool affinity_hint_set; > > +}; > > + > > +struct virtio_crypto_sym_session_info { > > + /* Backend session id, which come from the host side */ > > + __u64 session_id; > > +}; > > + > > +struct virtio_crypto_ablkcipher_ctx { > > + struct virtio_crypto *vcrypto; > > + struct crypto_tfm *tfm; > > + > > + struct virtio_crypto_sym_session_info enc_sess_info; > > + struct virtio_crypto_sym_session_info dec_sess_info; > > + > > + /* Protects virtio_crypto_ablkcipher_ctx struct */ > > + spinlock_t lock; > > +}; > > + > > +struct virtio_crypto_request { > > + /* Cipher or aead */ > > + uint32_t type; > > + uint8_t status; > > + struct virtio_crypto_ablkcipher_ctx *ablkcipher_ctx; > > + struct ablkcipher_request *ablkcipher_req; > > + struct virtio_crypto_op_data_req *req_data; > > + struct scatterlist **sgs; > > +}; > > + > > +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev); > > +struct list_head *virtcrypto_devmgr_get_head(void); > > +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev); > > +struct virtio_crypto *virtcrypto_devmgr_get_first(void); > > +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev); > > +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev); > > +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev); > > +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev); > > +struct virtio_crypto *virtcrypto_get_dev_node(int node); > > +int virtcrypto_dev_start(struct virtio_crypto *vcrypto); > > +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto); > > + > > +static inline int virtio_crypto_get_current_node(void) > > +{ > > + return topology_physical_package_id(smp_processor_id()); > > +} > > + > > +int virtio_crypto_algs_register(void); > > +void virtio_crypto_algs_unregister(void); > > + > > +#endif /* _VIRITO_CRYPTO_COMMON_H */ > > diff --git a/drivers/crypto/virtio/virtio_crypto_mgr.c > b/drivers/crypto/virtio/virtio_crypto_mgr.c > > new file mode 100644 > > index 0000000..5b7260c > > --- /dev/null > > +++ b/drivers/crypto/virtio/virtio_crypto_mgr.c > > @@ -0,0 +1,258 @@ > > + /* Management for virtio crypto devices (refer to adf_dev_mgr.c) > > + * > > + * Copyright 2016 HUAWEI TECHNOLOGIES CO., LTD. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, see <http://www.gnu.org/licenses/>. > > + */ > > + > > +#include <linux/mutex.h> > > +#include <linux/list.h> > > +#include <linux/module.h> > > + > > +#include <uapi/linux/virtio_crypto.h> > > +#include "virtio_crypto_common.h" > > + > > +static LIST_HEAD(virtio_crypto_table); > > +static DEFINE_MUTEX(table_lock); > > +static uint32_t num_devices; > > + > > +#define VIRTIO_CRYPTO_MAX_DEVICES 32 > > + > > + > > +/* > > + * virtcrypto_devmgr_add_dev() - Add vcrypto_dev to the acceleration > > + * framework. > > + * @vcrypto_dev: Pointer to virtio crypto device. > > + * > > + * Function adds virtio crypto device to the global list. > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: 0 on success, error code othewise. > > + */ > > +int virtcrypto_devmgr_add_dev(struct virtio_crypto *vcrypto_dev) > > +{ > > + struct list_head *itr; > > + > > + if (num_devices == VIRTIO_CRYPTO_MAX_DEVICES) { > > + pr_info("virtio_crypto: only support up to %d devices\n", > > + VIRTIO_CRYPTO_MAX_DEVICES); > > + return -EFAULT; > > + } > > + > > + mutex_lock(&table_lock); > > + list_for_each(itr, &virtio_crypto_table) { > > + struct virtio_crypto *ptr = > > + list_entry(itr, struct virtio_crypto, list); > > + > > + if (ptr == vcrypto_dev) { > > + mutex_unlock(&table_lock); > > + return -EEXIST; > > + } > > + } > > + atomic_set(&vcrypto_dev->ref_count, 0); > > + list_add_tail(&vcrypto_dev->list, &virtio_crypto_table); > > + vcrypto_dev->dev_id = num_devices++; > > + mutex_unlock(&table_lock); > > + return 0; > > +} > > + > > +struct list_head *virtcrypto_devmgr_get_head(void) > > +{ > > + return &virtio_crypto_table; > > +} > > + > > +/* > > + * virtcrypto_devmgr_rm_dev() - Remove vcrypto_dev from the acceleration > > + * framework. > > + * @vcrypto_dev: Pointer to virtio crypto device. > > + * > > + * Function removes virtio crypto device from the acceleration framework. > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: void > > + */ > > +void virtcrypto_devmgr_rm_dev(struct virtio_crypto *vcrypto_dev) > > +{ > > + mutex_lock(&table_lock); > > + list_del(&vcrypto_dev->list); > > + num_devices--; > > + mutex_unlock(&table_lock); > > +} > > + > > +/* > > + * virtcrypto_devmgr_get_first() > > + * > > + * Function returns the first virtio crypto device from the acceleration > > + * framework. > > + * > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: pointer to vcrypto_dev or NULL if not found. > > + */ > > +struct virtio_crypto *virtcrypto_devmgr_get_first(void) > > +{ > > + struct virtio_crypto *dev = NULL; > > + > > + if (!list_empty(&virtio_crypto_table)) > > + dev = list_first_entry(&virtio_crypto_table, > > + struct virtio_crypto, > > + list); > > + return dev; > > +} > > + > > +/* > > + * virtcrypto_dev_in_use() - Check whether vcrypto_dev is currently in use > > + * @vcrypto_dev: Pointer to virtio crypto device. > > + * > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: 1 when device is in use, 0 otherwise. > > + */ > > +int virtcrypto_dev_in_use(struct virtio_crypto *vcrypto_dev) > > +{ > > + return atomic_read(&vcrypto_dev->ref_count) != 0; > > +} > > + > > +/* > > + * virtcrypto_dev_get() - Increment vcrypto_dev reference count > > + * @vcrypto_dev: Pointer to virtio crypto device. > > + * > > + * Increment the vcrypto_dev refcount and if this is the first time > > + * incrementing it during this period the vcrypto_dev is in use, > > + * increment the module refcount too. > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: 0 when successful, EFAULT when fail to bump module refcount > > + */ > > +int virtcrypto_dev_get(struct virtio_crypto *vcrypto_dev) > > +{ > > + if (atomic_add_return(1, &vcrypto_dev->ref_count) == 1) > > + if (!try_module_get(vcrypto_dev->owner)) > > + return -EFAULT; > > + return 0; > > +} > > + > > +/* > > + * virtcrypto_dev_put() - Decrement vcrypto_dev reference count > > + * @vcrypto_dev: Pointer to virtio crypto device. > > + * > > + * Decrement the vcrypto_dev refcount and if this is the last time > > + * decrementing it during this period the vcrypto_dev is in use, > > + * decrement the module refcount too. > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: void > > + */ > > +void virtcrypto_dev_put(struct virtio_crypto *vcrypto_dev) > > +{ > > + if (atomic_sub_return(1, &vcrypto_dev->ref_count) == 0) > > + module_put(vcrypto_dev->owner); > > +} > > + > > +/* > > + * virtcrypto_dev_started() - Check whether device has started > > + * @vcrypto_dev: Pointer to virtio crypto device. > > + * > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: 1 when the device has started, 0 otherwise > > + */ > > +int virtcrypto_dev_started(struct virtio_crypto *vcrypto_dev) > > +{ > > + return (vcrypto_dev->status & VIRTIO_CRYPTO_S_HW_READY); > > +} > > + > > +/* > > + * virtcrypto_get_dev_node() - Get vcrypto_dev on the node. > > + * @node: Node id the driver works. > > + * > > + * Function returns the virtio crypto device used fewest on the node. > > + * > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: pointer to vcrypto_dev or NULL if not found. > > + */ > > +struct virtio_crypto *virtcrypto_get_dev_node(int node) > > +{ > > + struct virtio_crypto *vcrypto_dev = NULL, *tmp_dev; > > + unsigned long best = ~0; > > + unsigned long ctr; > > + > > + list_for_each_entry(tmp_dev, virtcrypto_devmgr_get_head(), list) { > > + > > + if ((node == dev_to_node(&tmp_dev->vdev->dev) || > > + dev_to_node(&tmp_dev->vdev->dev) < 0) && > > + virtcrypto_dev_started(tmp_dev)) { > > + ctr = atomic_read(&tmp_dev->ref_count); > > + if (best > ctr) { > > + vcrypto_dev = tmp_dev; > > + best = ctr; > > + } > > + } > > + } > > + > > + if (!vcrypto_dev) { > > + pr_info("virtio_crypto: Could not find a device on node %d\n", > > + node); > > + /* Get any started device */ > > + list_for_each_entry(tmp_dev, > > + virtcrypto_devmgr_get_head(), list) { > > + if (virtcrypto_dev_started(tmp_dev)) { > > + vcrypto_dev = tmp_dev; > > + break; > > + } > > + } > > + } > > + > > + if (!vcrypto_dev) > > + return NULL; > > + > > + virtcrypto_dev_get(vcrypto_dev); > > + return vcrypto_dev; > > +} > > + > > +/* > > + * virtcrypto_dev_start() - Start virtio crypto device > > + * @vcrypto: Pointer to virtio crypto device. > > + * > > + * Function notifies all the registered services that the virtio crypto device > > + * is ready to be used. > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: 0 on success, EFAULT when fail to register algorithms > > + */ > > +int virtcrypto_dev_start(struct virtio_crypto *vcrypto) > > +{ > > + if (virtio_crypto_algs_register()) { > > + pr_err("virtio_crypto: Failed to register crypto algs\n"); > > + return -EFAULT; > > + } > > + > > + return 0; > > +} > > + > > +/* > > + * virtcrypto_dev_stop() - Stop virtio crypto device > > + * @vcrypto: Pointer to virtio crypto device. > > + * > > + * Function notifies all the registered services that the virtio crypto device > > + * is ready to be used. > > + * To be used by virtio crypto device specific drivers. > > + * > > + * Return: void > > + */ > > +void virtcrypto_dev_stop(struct virtio_crypto *vcrypto) > > +{ > > + virtio_crypto_algs_unregister(); > > +} > > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild > > index cd2be1c..4bdb84c 100644 > > --- a/include/uapi/linux/Kbuild > > +++ b/include/uapi/linux/Kbuild > > @@ -460,6 +460,7 @@ header-y += virtio_rng.h > > header-y += virtio_scsi.h > > header-y += virtio_types.h > > header-y += virtio_vsock.h > > +header-y += virtio_crypto.h > > header-y += vm_sockets.h > > header-y += vt.h > > header-y += vtpm_proxy.h > > diff --git a/include/uapi/linux/virtio_crypto.h > b/include/uapi/linux/virtio_crypto.h > > new file mode 100644 > > index 0000000..abc2cf5 > > --- /dev/null > > +++ b/include/uapi/linux/virtio_crypto.h > > @@ -0,0 +1,435 @@ > > +#ifndef _VIRTIO_CRYPTO_H > > +#define _VIRTIO_CRYPTO_H > > +/* This header is BSD licensed so anyone can use the definitions to > implement > > + * compatible drivers/servers. > > + * > > + * Redistribution and use in source and binary forms, with or without > > + * modification, are permitted provided that the following conditions > > + * are met: > > + * 1. Redistributions of source code must retain the above copyright > > + * notice, this list of conditions and the following disclaimer. > > + * 2. Redistributions in binary form must reproduce the above copyright > > + * notice, this list of conditions and the following disclaimer in the > > + * documentation and/or other materials provided with the distribution. > > + * 3. Neither the name of IBM nor the names of its contributors > > + * may be used to endorse or promote products derived from this > software > > + * without specific prior written permission. > > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND > CONTRIBUTORS > > + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT > NOT > > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND > FITNESS > > + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL > IBM OR > > + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > NOT > > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS > OF > > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER > CAUSED AND > > + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT > LIABILITY, > > + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY > WAY OUT > > + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF > > + * SUCH DAMAGE. > > + */ > > +#include <linux/types.h> > > +#include <linux/virtio_types.h> > > +#include <linux/virtio_ids.h> > > +#include <linux/virtio_config.h> > > + > > + > > +#define VIRTIO_CRYPTO_SERVICE_CIPHER 0 > > +#define VIRTIO_CRYPTO_SERVICE_HASH 1 > > +#define VIRTIO_CRYPTO_SERVICE_MAC 2 > > +#define VIRTIO_CRYPTO_SERVICE_AEAD 3 > > + > > +#define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op)) > > + > > +struct virtio_crypto_ctrl_header { > > +#define VIRTIO_CRYPTO_CIPHER_CREATE_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x02) > > +#define VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_CIPHER, 0x03) > > +#define VIRTIO_CRYPTO_HASH_CREATE_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x02) > > +#define VIRTIO_CRYPTO_HASH_DESTROY_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_HASH, 0x03) > > +#define VIRTIO_CRYPTO_MAC_CREATE_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x02) > > +#define VIRTIO_CRYPTO_MAC_DESTROY_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_MAC, 0x03) > > +#define VIRTIO_CRYPTO_AEAD_CREATE_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) > > +#define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ > > + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) > > + __le32 opcode; > > + __le32 algo; > > + __le32 flag; > > + /* data virtqueue id */ > > + __le32 queue_id; > > +}; > > + > > +struct virtio_crypto_cipher_session_para { > > +#define VIRTIO_CRYPTO_NO_CIPHER 0 > > +#define VIRTIO_CRYPTO_CIPHER_ARC4 1 > > +#define VIRTIO_CRYPTO_CIPHER_AES_ECB 2 > > +#define VIRTIO_CRYPTO_CIPHER_AES_CBC 3 > > +#define VIRTIO_CRYPTO_CIPHER_AES_CTR 4 > > +#define VIRTIO_CRYPTO_CIPHER_DES_ECB 5 > > +#define VIRTIO_CRYPTO_CIPHER_DES_CBC 6 > > +#define VIRTIO_CRYPTO_CIPHER_3DES_ECB 7 > > +#define VIRTIO_CRYPTO_CIPHER_3DES_CBC 8 > > +#define VIRTIO_CRYPTO_CIPHER_3DES_CTR 9 > > +#define VIRTIO_CRYPTO_CIPHER_KASUMI_F8 10 > > +#define VIRTIO_CRYPTO_CIPHER_SNOW3G_UEA2 11 > > +#define VIRTIO_CRYPTO_CIPHER_AES_F8 12 > > +#define VIRTIO_CRYPTO_CIPHER_AES_XTS 13 > > +#define VIRTIO_CRYPTO_CIPHER_ZUC_EEA3 14 > > + __le32 algo; > > + /* length of key */ > > + __le32 keylen; > > + > > +#define VIRTIO_CRYPTO_OP_ENCRYPT 1 > > +#define VIRTIO_CRYPTO_OP_DECRYPT 2 > > + /* encrypt or decrypt */ > > + __le32 op; > > + __le32 padding; > > +}; > > + > > +struct virtio_crypto_session_input { > > + /* Device-writable part */ > > + __le64 session_id; > > + __le32 status; > > + __le32 padding; > > +}; > > + > > +struct virtio_crypto_cipher_session_req { > > + struct virtio_crypto_cipher_session_para para; > > +}; > > + > > +struct virtio_crypto_hash_session_para { > > +#define VIRTIO_CRYPTO_NO_HASH 0 > > +#define VIRTIO_CRYPTO_HASH_MD5 1 > > +#define VIRTIO_CRYPTO_HASH_SHA1 2 > > +#define VIRTIO_CRYPTO_HASH_SHA_224 3 > > +#define VIRTIO_CRYPTO_HASH_SHA_256 4 > > +#define VIRTIO_CRYPTO_HASH_SHA_384 5 > > +#define VIRTIO_CRYPTO_HASH_SHA_512 6 > > +#define VIRTIO_CRYPTO_HASH_SHA3_224 7 > > +#define VIRTIO_CRYPTO_HASH_SHA3_256 8 > > +#define VIRTIO_CRYPTO_HASH_SHA3_384 9 > > +#define VIRTIO_CRYPTO_HASH_SHA3_512 10 > > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE128 11 > > +#define VIRTIO_CRYPTO_HASH_SHA3_SHAKE256 12 > > + __le32 algo; > > + /* hash result length */ > > + __le32 hash_result_len; > > +}; > > + > > +struct virtio_crypto_hash_create_session_req { > > + struct virtio_crypto_hash_session_para para; > > +}; > > + > > +struct virtio_crypto_mac_session_para { > > +#define VIRTIO_CRYPTO_NO_MAC 0 > > +#define VIRTIO_CRYPTO_MAC_HMAC_MD5 1 > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA1 2 > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_224 3 > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_256 4 > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_384 5 > > +#define VIRTIO_CRYPTO_MAC_HMAC_SHA_512 6 > > +#define VIRTIO_CRYPTO_MAC_CMAC_3DES 25 > > +#define VIRTIO_CRYPTO_MAC_CMAC_AES 26 > > +#define VIRTIO_CRYPTO_MAC_KASUMI_F9 27 > > +#define VIRTIO_CRYPTO_MAC_SNOW3G_UIA2 28 > > +#define VIRTIO_CRYPTO_MAC_GMAC_AES 41 > > +#define VIRTIO_CRYPTO_MAC_GMAC_TWOFISH 42 > > +#define VIRTIO_CRYPTO_MAC_CBCMAC_AES 49 > > +#define VIRTIO_CRYPTO_MAC_CBCMAC_KASUMI_F9 50 > > +#define VIRTIO_CRYPTO_MAC_XCBC_AES 53 > > + __le32 algo; > > + /* hash result length */ > > + __le32 hash_result_len; > > + /* length of authenticated key */ > > + __le32 auth_key_len; > > + __le32 padding; > > +}; > > + > > +struct virtio_crypto_mac_create_session_req { > > + struct virtio_crypto_mac_session_para para; > > +}; > > + > > +struct virtio_crypto_aead_session_para { > > +#define VIRTIO_CRYPTO_NO_AEAD 0 > > +#define VIRTIO_CRYPTO_AEAD_GCM 1 > > +#define VIRTIO_CRYPTO_AEAD_CCM 2 > > +#define VIRTIO_CRYPTO_AEAD_CHACHA20_POLY1305 3 > > + __le32 algo; > > + /* length of key */ > > + __le32 key_len; > > + /* hash result length */ > > + __le32 hash_result_len; > > + /* length of the additional authenticated data (AAD) in bytes */ > > + __le32 aad_len; > > + /* encrypt or decrypt, See above VIRTIO_CRYPTO_OP_* */ > > + __le32 op; > > + __le32 padding; > > +}; > > + > > +struct virtio_crypto_aead_create_session_req { > > + struct virtio_crypto_aead_session_para para; > > +}; > > + > > +struct virtio_crypto_alg_chain_session_para { > > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER > 1 > > +#define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH > 2 > > + __le32 alg_chain_order; > > +/* Plain hash */ > > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN 1 > > +/* Authenticated hash (mac) */ > > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH 2 > > +/* Nested hash */ > > +#define VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED 3 > > + __le32 hash_mode; > > + struct virtio_crypto_cipher_session_para cipher_param; > > + union { > > + struct virtio_crypto_hash_session_para hash_param; > > + struct virtio_crypto_mac_session_para mac_param; > > + } u; > > I personally dislike the use of unions of different size > in these structures. For example, using hash_param, > there's no way to initialize the trailing part of the > structure. Also, the size of the structure is hard to > figure out. I would like to see padding of all structures > to be same size, and adding a union member that's just padding. > > Same applies to other unions. > Good suggestion :) Let me rework them. Michael, I'd like to add virtio-crypto stuff to your maintaining part likes the virtio-net/blk parts so that the corresponding patches can be CC'ed to you too because the virtio-crypto doesn't lay in driver/virtio directory. Will you? Thanks! -Gonglei ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <33183CC9F5247A488A2544077AF19020D97A10EC@SZXEMA503-MBS.china.huawei.com>]
* Re: [virtio-dev] Re: [PATCH v2 2/2] crypto: add virtio-crypto driver [not found] ` <33183CC9F5247A488A2544077AF19020D97A10EC@SZXEMA503-MBS.china.huawei.com> @ 2016-11-28 5:09 ` Michael S. Tsirkin [not found] ` <20161128070829-mutt-send-email-mst@kernel.org> 1 sibling, 0 replies; 13+ messages in thread From: Michael S. Tsirkin @ 2016-11-28 5:09 UTC (permalink / raw) To: Gonglei (Arei) Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) On Mon, Nov 28, 2016 at 04:47:21AM +0000, Gonglei (Arei) wrote: > Michael, I'd like to add virtio-crypto stuff to your maintaining part likes > the virtio-net/blk parts so that the corresponding patches > can be CC'ed to you too because the virtio-crypto doesn't lay in > driver/virtio directory. Will you? > > Thanks! > -Gonglei Sure, that's fine. -- MST ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20161128070829-mutt-send-email-mst@kernel.org>]
* RE: [virtio-dev] Re: [PATCH v2 2/2] crypto: add virtio-crypto driver [not found] ` <20161128070829-mutt-send-email-mst@kernel.org> @ 2016-11-28 5:38 ` Gonglei (Arei) 0 siblings, 0 replies; 13+ messages in thread From: Gonglei (Arei) @ 2016-11-28 5:38 UTC (permalink / raw) To: Michael S. Tsirkin Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) > > From: Michael S. Tsirkin [mailto:mst@redhat.com] > Sent: Monday, November 28, 2016 1:09 PM > To: Gonglei (Arei) > Subject: Re: [virtio-dev] Re: [PATCH v2 2/2] crypto: add virtio-crypto driver > > On Mon, Nov 28, 2016 at 04:47:21AM +0000, Gonglei (Arei) wrote: > > Michael, I'd like to add virtio-crypto stuff to your maintaining part likes > > the virtio-net/blk parts so that the corresponding patches > > can be CC'ed to you too because the virtio-crypto doesn't lay in > > driver/virtio directory. Will you? > > > > Thanks! > > -Gonglei > > Sure, that's fine. > Will do in the next version. :) Thanks, -Gonglei ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <1479802223-121104-2-git-send-email-arei.gonglei@huawei.com>]
* Re: [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family [not found] ` <1479802223-121104-2-git-send-email-arei.gonglei@huawei.com> @ 2016-11-27 3:32 ` Michael S. Tsirkin 2016-11-28 1:56 ` [virtio-dev] " Gonglei (Arei) [not found] ` <33183CC9F5247A488A2544077AF19020D97A103C@SZXEMA503-MBS.china.huawei.com> 0 siblings, 2 replies; 13+ messages in thread From: Michael S. Tsirkin @ 2016-11-27 3:32 UTC (permalink / raw) To: Gonglei Cc: virtio-dev, weidong.huang, claudio.fontana, hanweidong, qemu-devel, luonengjun, linux-kernel, virtualization, salvatore.benedetto, xuquan8, linux-crypto, stefanha, jianjay.zhou, longpeng2, arei.gonglei, davem, wu.wubin, herbert On Tue, Nov 22, 2016 at 04:10:22PM +0800, Gonglei wrote: > Virtio modern devices are always little edian, let's introduce > the LE functions for read/write configuration space for > virtio modern devices, which avoid complaint by Sparse when > we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > --- > include/linux/virtio_config.h | 45 +++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h > index 26c155b..de05707 100644 > --- a/include/linux/virtio_config.h > +++ b/include/linux/virtio_config.h > @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct virtio_device *vdev, > _r; \ > }) > > +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, > + unsigned int offset) > +{ > + __le16 ret; > + > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > + return ret; > +} > + > +static inline void virtio_cwrite16_le(struct virtio_device *vdev, > + unsigned int offset, __le16 val) > +{ > + vdev->config->set(vdev, offset, &val, sizeof(val)); > +} > + > +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, > + unsigned int offset) > +{ > + __le32 ret; > + > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > + return ret; > +} > + > +static inline void virtio_cwrite32_le(struct virtio_device *vdev, > + unsigned int offset, __le32 val) > +{ > + vdev->config->set(vdev, offset, &val, sizeof(val)); > +} > + > +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, > + unsigned int offset) > +{ > + __le64 ret; > + > + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); > + return ret; > +} > + > +static inline void virtio_cwrite64_le(struct virtio_device *vdev, > + unsigned int offset, __le64 val) > +{ > + vdev->config->set(vdev, offset, &val, sizeof(val)); > +} > + > #endif /* _LINUX_VIRTIO_CONFIG_H */ Could you please better explain what is the issue you are facing? virtio_cwrite/virtio_cread all accept and return native types. If you want it in LE format, swap it! > -- > 1.8.3.1 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family 2016-11-27 3:32 ` [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family Michael S. Tsirkin @ 2016-11-28 1:56 ` Gonglei (Arei) [not found] ` <33183CC9F5247A488A2544077AF19020D97A103C@SZXEMA503-MBS.china.huawei.com> 1 sibling, 0 replies; 13+ messages in thread From: Gonglei (Arei) @ 2016-11-28 1:56 UTC (permalink / raw) To: Michael S. Tsirkin Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) Hi Michael, Thanks for your feedback firstly! > -----Original Message----- > From: virtio-dev@lists.oasis-open.org [mailto:virtio-dev@lists.oasis-open.org] > On Behalf Of Michael S. Tsirkin > Sent: Sunday, November 27, 2016 11:33 AM > To: Gonglei (Arei) > Subject: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for > virtio_cread/write# family > > On Tue, Nov 22, 2016 at 04:10:22PM +0800, Gonglei wrote: > > Virtio modern devices are always little edian, let's introduce > > the LE functions for read/write configuration space for > > virtio modern devices, which avoid complaint by Sparse when > > we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. > > > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > > --- > > include/linux/virtio_config.h | 45 > +++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > > > diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h > > index 26c155b..de05707 100644 > > --- a/include/linux/virtio_config.h > > +++ b/include/linux/virtio_config.h > > @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct virtio_device > *vdev, > > _r; \ > > }) > > > > +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, > > + unsigned int offset) > > +{ > > + __le16 ret; > > + > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > + return ret; > > +} > > + > > +static inline void virtio_cwrite16_le(struct virtio_device *vdev, > > + unsigned int offset, __le16 val) > > +{ > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > +} > > + > > +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, > > + unsigned int offset) > > +{ > > + __le32 ret; > > + > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > + return ret; > > +} > > + > > +static inline void virtio_cwrite32_le(struct virtio_device *vdev, > > + unsigned int offset, __le32 val) > > +{ > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > +} > > + > > +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, > > + unsigned int offset) > > +{ > > + __le64 ret; > > + > > + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); > > + return ret; > > +} > > + > > +static inline void virtio_cwrite64_le(struct virtio_device *vdev, > > + unsigned int offset, __le64 val) > > +{ > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > +} > > + > > #endif /* _LINUX_VIRTIO_CONFIG_H */ > > Could you please better explain what is the issue you are facing? > virtio_cwrite/virtio_cread all accept and return native types. > virtio_cwrite/virtio_cread are used to write/read configuration space for virtio devices. For virtio-crypto device, I used __le32/64 directly in struct virtio_crypto_config. The sparse reports warnings if I use virtio_cread() for virtio-crypto device. Furthermore, it means the warnings exist for all VIRTIO_1 devices because they are definitely LE, which it's not necessary to use virtio_to_cpu/cpu_to_virtio. PS: I googled a discussion about this topic for virtio-input device, pls see: http://linux.kernel.narkive.com/3argfbWz/patch-1-1-add-virtio-input-driver Regards, -Gonglei > If you want it in LE format, swap it! > > > > > -- > > 1.8.3.1 > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <33183CC9F5247A488A2544077AF19020D97A103C@SZXEMA503-MBS.china.huawei.com>]
* Re: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family [not found] ` <33183CC9F5247A488A2544077AF19020D97A103C@SZXEMA503-MBS.china.huawei.com> @ 2016-11-28 2:34 ` Michael S. Tsirkin [not found] ` <20161128042142-mutt-send-email-mst@kernel.org> 1 sibling, 0 replies; 13+ messages in thread From: Michael S. Tsirkin @ 2016-11-28 2:34 UTC (permalink / raw) To: Gonglei (Arei) Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) On Mon, Nov 28, 2016 at 01:56:04AM +0000, Gonglei (Arei) wrote: > Hi Michael, > > Thanks for your feedback firstly! > > > -----Original Message----- > > From: virtio-dev@lists.oasis-open.org [mailto:virtio-dev@lists.oasis-open.org] > > On Behalf Of Michael S. Tsirkin > > Sent: Sunday, November 27, 2016 11:33 AM > > To: Gonglei (Arei) > > Subject: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for > > virtio_cread/write# family > > > > On Tue, Nov 22, 2016 at 04:10:22PM +0800, Gonglei wrote: > > > Virtio modern devices are always little edian, let's introduce > > > the LE functions for read/write configuration space for > > > virtio modern devices, which avoid complaint by Sparse when > > > we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. > > > > > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > > > --- > > > include/linux/virtio_config.h | 45 > > +++++++++++++++++++++++++++++++++++++++++++ > > > 1 file changed, 45 insertions(+) > > > > > > diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h > > > index 26c155b..de05707 100644 > > > --- a/include/linux/virtio_config.h > > > +++ b/include/linux/virtio_config.h > > > @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct virtio_device > > *vdev, > > > _r; \ > > > }) > > > > > > +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, > > > + unsigned int offset) > > > +{ > > > + __le16 ret; > > > + > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > + return ret; > > > +} > > > + > > > +static inline void virtio_cwrite16_le(struct virtio_device *vdev, > > > + unsigned int offset, __le16 val) > > > +{ > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > +} > > > + > > > +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, > > > + unsigned int offset) > > > +{ > > > + __le32 ret; > > > + > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > + return ret; > > > +} > > > + > > > +static inline void virtio_cwrite32_le(struct virtio_device *vdev, > > > + unsigned int offset, __le32 val) > > > +{ > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > +} > > > + > > > +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, > > > + unsigned int offset) > > > +{ > > > + __le64 ret; > > > + > > > + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); > > > + return ret; > > > +} > > > + > > > +static inline void virtio_cwrite64_le(struct virtio_device *vdev, > > > + unsigned int offset, __le64 val) > > > +{ > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > +} > > > + > > > #endif /* _LINUX_VIRTIO_CONFIG_H */ > > > > Could you please better explain what is the issue you are facing? > > virtio_cwrite/virtio_cread all accept and return native types. > > > virtio_cwrite/virtio_cread are used to write/read configuration > space for virtio devices. For virtio-crypto device, I used __le32/64 directly > in struct virtio_crypto_config. The sparse reports warnings if I use virtio_cread() > for virtio-crypto device. I suspect that's because you are doing cread into an le32 variable. > Furthermore, it means the warnings exist for all VIRTIO_1 devices because > they are definitely LE, which it's not necessary to use virtio_to_cpu/cpu_to_virtio. > > > PS: I googled a discussion about this topic for virtio-input device, pls see: > http://linux.kernel.narkive.com/3argfbWz/patch-1-1-add-virtio-input-driver > > Regards, > -Gonglei Looks like we changed the macros since - at least ATM virtio_console_config uses __u16 fields (which is probably a bug - I'll look into fixing it up) and they do not seem to trigger warnings. > > If you want it in LE format, swap it! > > > > > > > > > -- > > > 1.8.3.1 > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20161128042142-mutt-send-email-mst@kernel.org>]
* RE: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family [not found] ` <20161128042142-mutt-send-email-mst@kernel.org> @ 2016-11-28 2:53 ` Gonglei (Arei) 2016-11-28 2:54 ` Michael S. Tsirkin [not found] ` <20161128044845-mutt-send-email-mst@kernel.org> 2 siblings, 0 replies; 13+ messages in thread From: Gonglei (Arei) @ 2016-11-28 2:53 UTC (permalink / raw) To: Michael S. Tsirkin Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) > > Subject: Re: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian > functions for virtio_cread/write# family > > On Mon, Nov 28, 2016 at 01:56:04AM +0000, Gonglei (Arei) wrote: > > Hi Michael, > > > > Thanks for your feedback firstly! > > > > > -----Original Message----- > > > From: virtio-dev@lists.oasis-open.org > [mailto:virtio-dev@lists.oasis-open.org] > > > On Behalf Of Michael S. Tsirkin > > > Sent: Sunday, November 27, 2016 11:33 AM > > > To: Gonglei (Arei) > > > Subject: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions > for > > > virtio_cread/write# family > > > > > > On Tue, Nov 22, 2016 at 04:10:22PM +0800, Gonglei wrote: > > > > Virtio modern devices are always little edian, let's introduce > > > > the LE functions for read/write configuration space for > > > > virtio modern devices, which avoid complaint by Sparse when > > > > we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. > > > > > > > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > > > > --- > > > > include/linux/virtio_config.h | 45 > > > +++++++++++++++++++++++++++++++++++++++++++ > > > > 1 file changed, 45 insertions(+) > > > > > > > > diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h > > > > index 26c155b..de05707 100644 > > > > --- a/include/linux/virtio_config.h > > > > +++ b/include/linux/virtio_config.h > > > > @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct > virtio_device > > > *vdev, > > > > _r; \ > > > > }) > > > > > > > > +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, > > > > + unsigned int offset) > > > > +{ > > > > + __le16 ret; > > > > + > > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > > + return ret; > > > > +} > > > > + > > > > +static inline void virtio_cwrite16_le(struct virtio_device *vdev, > > > > + unsigned int offset, __le16 val) > > > > +{ > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > +} > > > > + > > > > +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, > > > > + unsigned int offset) > > > > +{ > > > > + __le32 ret; > > > > + > > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > > + return ret; > > > > +} > > > > + > > > > +static inline void virtio_cwrite32_le(struct virtio_device *vdev, > > > > + unsigned int offset, __le32 val) > > > > +{ > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > +} > > > > + > > > > +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, > > > > + unsigned int offset) > > > > +{ > > > > + __le64 ret; > > > > + > > > > + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); > > > > + return ret; > > > > +} > > > > + > > > > +static inline void virtio_cwrite64_le(struct virtio_device *vdev, > > > > + unsigned int offset, __le64 val) > > > > +{ > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > +} > > > > + > > > > #endif /* _LINUX_VIRTIO_CONFIG_H */ > > > > > > Could you please better explain what is the issue you are facing? > > > virtio_cwrite/virtio_cread all accept and return native types. > > > > > virtio_cwrite/virtio_cread are used to write/read configuration > > space for virtio devices. For virtio-crypto device, I used __le32/64 directly > > in struct virtio_crypto_config. The sparse reports warnings if I use > virtio_cread() > > for virtio-crypto device. > > I suspect that's because you are doing cread into an le32 variable. > > Yes. > > > Furthermore, it means the warnings exist for all VIRTIO_1 devices because > > they are definitely LE, which it's not necessary to use > virtio_to_cpu/cpu_to_virtio. > > > > > > PS: I googled a discussion about this topic for virtio-input device, pls see: > > http://linux.kernel.narkive.com/3argfbWz/patch-1-1-add-virtio-input-driver > > > > Regards, > > -Gonglei > > Looks like we changed the macros since - at least ATM > virtio_console_config uses __u16 fields (which is probably a bug - > I'll look into fixing it up) and they > do not seem to trigger warnings. > Cool. __u16/32/64 are fine, but __le16/32/64 will trigger warnings. Regards, -Gonglei > > > > If you want it in LE format, swap it! > > > > > > > > > > > > > -- > > > > 1.8.3.1 > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family [not found] ` <20161128042142-mutt-send-email-mst@kernel.org> 2016-11-28 2:53 ` Gonglei (Arei) @ 2016-11-28 2:54 ` Michael S. Tsirkin [not found] ` <20161128044845-mutt-send-email-mst@kernel.org> 2 siblings, 0 replies; 13+ messages in thread From: Michael S. Tsirkin @ 2016-11-28 2:54 UTC (permalink / raw) To: Gonglei (Arei) Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) On Mon, Nov 28, 2016 at 04:34:56AM +0200, Michael S. Tsirkin wrote: > On Mon, Nov 28, 2016 at 01:56:04AM +0000, Gonglei (Arei) wrote: > > Hi Michael, > > > > Thanks for your feedback firstly! > > > > > -----Original Message----- > > > From: virtio-dev@lists.oasis-open.org [mailto:virtio-dev@lists.oasis-open.org] > > > On Behalf Of Michael S. Tsirkin > > > Sent: Sunday, November 27, 2016 11:33 AM > > > To: Gonglei (Arei) > > > Subject: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for > > > virtio_cread/write# family > > > > > > On Tue, Nov 22, 2016 at 04:10:22PM +0800, Gonglei wrote: > > > > Virtio modern devices are always little edian, let's introduce > > > > the LE functions for read/write configuration space for > > > > virtio modern devices, which avoid complaint by Sparse when > > > > we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. > > > > > > > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > > > > --- > > > > include/linux/virtio_config.h | 45 > > > +++++++++++++++++++++++++++++++++++++++++++ > > > > 1 file changed, 45 insertions(+) > > > > > > > > diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h > > > > index 26c155b..de05707 100644 > > > > --- a/include/linux/virtio_config.h > > > > +++ b/include/linux/virtio_config.h > > > > @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct virtio_device > > > *vdev, > > > > _r; \ > > > > }) > > > > > > > > +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, > > > > + unsigned int offset) > > > > +{ > > > > + __le16 ret; > > > > + > > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > > + return ret; > > > > +} > > > > + > > > > +static inline void virtio_cwrite16_le(struct virtio_device *vdev, > > > > + unsigned int offset, __le16 val) > > > > +{ > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > +} > > > > + > > > > +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, > > > > + unsigned int offset) > > > > +{ > > > > + __le32 ret; > > > > + > > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > > + return ret; > > > > +} > > > > + > > > > +static inline void virtio_cwrite32_le(struct virtio_device *vdev, > > > > + unsigned int offset, __le32 val) > > > > +{ > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > +} > > > > + > > > > +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, > > > > + unsigned int offset) > > > > +{ > > > > + __le64 ret; > > > > + > > > > + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); > > > > + return ret; > > > > +} > > > > + > > > > +static inline void virtio_cwrite64_le(struct virtio_device *vdev, > > > > + unsigned int offset, __le64 val) > > > > +{ > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > +} > > > > + > > > > #endif /* _LINUX_VIRTIO_CONFIG_H */ > > > > > > Could you please better explain what is the issue you are facing? > > > virtio_cwrite/virtio_cread all accept and return native types. > > > > > virtio_cwrite/virtio_cread are used to write/read configuration > > space for virtio devices. For virtio-crypto device, I used __le32/64 directly > > in struct virtio_crypto_config. The sparse reports warnings if I use virtio_cread() > > for virtio-crypto device. > > I suspect that's because you are doing cread into an le32 variable. > > > > > Furthermore, it means the warnings exist for all VIRTIO_1 devices because > > they are definitely LE, which it's not necessary to use virtio_to_cpu/cpu_to_virtio. > > > > > > PS: I googled a discussion about this topic for virtio-input device, pls see: > > http://linux.kernel.narkive.com/3argfbWz/patch-1-1-add-virtio-input-driver > > > > Regards, > > -Gonglei > > Looks like we changed the macros since - at least ATM > virtio_console_config uses __u16 fields (which is probably a bug - > I'll look into fixing it up) and they > do not seem to trigger warnings. Sorry, I recall now. We use u32 and similar types in the config space, and endian-ness is implicit. This works fine if you are using virtio_cread interfaces which will swap to/from LE for you. What doesn't work correctly is shadowing the whole config space using ->get since that does not byte-swap. so just don't do it. I would say just do what everyone does in this version and we can revisit this later. > > > > If you want it in LE format, swap it! > > > > > > > > > > > > > -- > > > > 1.8.3.1 > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20161128044845-mutt-send-email-mst@kernel.org>]
* RE: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family [not found] ` <20161128044845-mutt-send-email-mst@kernel.org> @ 2016-11-28 2:57 ` Gonglei (Arei) 0 siblings, 0 replies; 13+ messages in thread From: Gonglei (Arei) @ 2016-11-28 2:57 UTC (permalink / raw) To: Michael S. Tsirkin Cc: virtio-dev@lists.oasis-open.org, Huangweidong (C), Claudio Fontana, Hanweidong (Randy), qemu-devel@nongnu.org, Luonengjun, linux-kernel@vger.kernel.org, virtualization@lists.linux-foundation.org, salvatore.benedetto@intel.com, Xuquan (Quan Xu), linux-crypto@vger.kernel.org, stefanha@redhat.com, Zhoujian (jay, Euler), longpeng, arei.gonglei@hotmail.com, davem@davemloft.net, Wubin (H) > > Subject: Re: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian > functions for virtio_cread/write# family > > On Mon, Nov 28, 2016 at 04:34:56AM +0200, Michael S. Tsirkin wrote: > > On Mon, Nov 28, 2016 at 01:56:04AM +0000, Gonglei (Arei) wrote: > > > Hi Michael, > > > > > > Thanks for your feedback firstly! > > > > > > > -----Original Message----- > > > > From: virtio-dev@lists.oasis-open.org > [mailto:virtio-dev@lists.oasis-open.org] > > > > On Behalf Of Michael S. Tsirkin > > > > Sent: Sunday, November 27, 2016 11:33 AM > > > > To: Gonglei (Arei) > > > > Subject: [virtio-dev] Re: [PATCH v2 1/2] virtio: introduce little edian > functions for > > > > virtio_cread/write# family > > > > > > > > On Tue, Nov 22, 2016 at 04:10:22PM +0800, Gonglei wrote: > > > > > Virtio modern devices are always little edian, let's introduce > > > > > the LE functions for read/write configuration space for > > > > > virtio modern devices, which avoid complaint by Sparse when > > > > > we use the virtio_creaed/virtio_cwrite in VIRTIO_1 devices. > > > > > > > > > > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > > > > > --- > > > > > include/linux/virtio_config.h | 45 > > > > +++++++++++++++++++++++++++++++++++++++++++ > > > > > 1 file changed, 45 insertions(+) > > > > > > > > > > diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h > > > > > index 26c155b..de05707 100644 > > > > > --- a/include/linux/virtio_config.h > > > > > +++ b/include/linux/virtio_config.h > > > > > @@ -414,4 +414,49 @@ static inline void virtio_cwrite64(struct > virtio_device > > > > *vdev, > > > > > _r; \ > > > > > }) > > > > > > > > > > +static inline __le16 virtio_cread16_le(struct virtio_device *vdev, > > > > > + unsigned int offset) > > > > > +{ > > > > > + __le16 ret; > > > > > + > > > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > > > + return ret; > > > > > +} > > > > > + > > > > > +static inline void virtio_cwrite16_le(struct virtio_device *vdev, > > > > > + unsigned int offset, __le16 val) > > > > > +{ > > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > > +} > > > > > + > > > > > +static inline __le32 virtio_cread32_le(struct virtio_device *vdev, > > > > > + unsigned int offset) > > > > > +{ > > > > > + __le32 ret; > > > > > + > > > > > + vdev->config->get(vdev, offset, &ret, sizeof(ret)); > > > > > + return ret; > > > > > +} > > > > > + > > > > > +static inline void virtio_cwrite32_le(struct virtio_device *vdev, > > > > > + unsigned int offset, __le32 val) > > > > > +{ > > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > > +} > > > > > + > > > > > +static inline __le64 virtio_cread64_le(struct virtio_device *vdev, > > > > > + unsigned int offset) > > > > > +{ > > > > > + __le64 ret; > > > > > + > > > > > + __virtio_cread_many(vdev, offset, &ret, 1, sizeof(ret)); > > > > > + return ret; > > > > > +} > > > > > + > > > > > +static inline void virtio_cwrite64_le(struct virtio_device *vdev, > > > > > + unsigned int offset, __le64 val) > > > > > +{ > > > > > + vdev->config->set(vdev, offset, &val, sizeof(val)); > > > > > +} > > > > > + > > > > > #endif /* _LINUX_VIRTIO_CONFIG_H */ > > > > > > > > Could you please better explain what is the issue you are facing? > > > > virtio_cwrite/virtio_cread all accept and return native types. > > > > > > > virtio_cwrite/virtio_cread are used to write/read configuration > > > space for virtio devices. For virtio-crypto device, I used __le32/64 directly > > > in struct virtio_crypto_config. The sparse reports warnings if I use > virtio_cread() > > > for virtio-crypto device. > > > > I suspect that's because you are doing cread into an le32 variable. > > > > > > > > > Furthermore, it means the warnings exist for all VIRTIO_1 devices because > > > they are definitely LE, which it's not necessary to use > virtio_to_cpu/cpu_to_virtio. > > > > > > > > > PS: I googled a discussion about this topic for virtio-input device, pls see: > > > > http://linux.kernel.narkive.com/3argfbWz/patch-1-1-add-virtio-input-driver > > > > > > Regards, > > > -Gonglei > > > > Looks like we changed the macros since - at least ATM > > virtio_console_config uses __u16 fields (which is probably a bug - > > I'll look into fixing it up) and they > > do not seem to trigger warnings. > > > Sorry, I recall now. We use u32 and similar types in the config > space, and endian-ness is implicit. > This works fine if you are using virtio_cread interfaces which will swap > to/from LE for you. > > What doesn't work correctly is shadowing the whole config space > using ->get since that does not byte-swap. so just don't do it. > > I would say just do what everyone does in this version and > we can revisit this later. > OK, it's fair. :) Thanks! -Gonglei > > > > > > If you want it in LE format, swap it! > > > > > > > > > > > > > > > > > -- > > > > > 1.8.3.1 > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org > > > > For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2016-11-28 5:38 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1479802223-121104-1-git-send-email-arei.gonglei@huawei.com>
2016-11-22 8:10 ` [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family Gonglei
2016-11-22 8:10 ` [PATCH v2 2/2] crypto: add virtio-crypto driver Gonglei
2016-11-26 9:38 ` [PATCH v2 0/2] virtio-crypto: add Linux driver Gonglei (Arei)
[not found] ` <1479802223-121104-3-git-send-email-arei.gonglei@huawei.com>
2016-11-27 3:27 ` [PATCH v2 2/2] crypto: add virtio-crypto driver Michael S. Tsirkin
[not found] ` <20161127045532-mutt-send-email-mst@kernel.org>
2016-11-28 4:47 ` [virtio-dev] " Gonglei (Arei)
[not found] ` <33183CC9F5247A488A2544077AF19020D97A10EC@SZXEMA503-MBS.china.huawei.com>
2016-11-28 5:09 ` Michael S. Tsirkin
[not found] ` <20161128070829-mutt-send-email-mst@kernel.org>
2016-11-28 5:38 ` Gonglei (Arei)
[not found] ` <1479802223-121104-2-git-send-email-arei.gonglei@huawei.com>
2016-11-27 3:32 ` [PATCH v2 1/2] virtio: introduce little edian functions for virtio_cread/write# family Michael S. Tsirkin
2016-11-28 1:56 ` [virtio-dev] " Gonglei (Arei)
[not found] ` <33183CC9F5247A488A2544077AF19020D97A103C@SZXEMA503-MBS.china.huawei.com>
2016-11-28 2:34 ` Michael S. Tsirkin
[not found] ` <20161128042142-mutt-send-email-mst@kernel.org>
2016-11-28 2:53 ` Gonglei (Arei)
2016-11-28 2:54 ` Michael S. Tsirkin
[not found] ` <20161128044845-mutt-send-email-mst@kernel.org>
2016-11-28 2:57 ` Gonglei (Arei)
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).