From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
virtualization@lists.linux-foundation.org,
Eric Dumazet <edumazet@google.com>,
Matthieu Baerts <matthieu.baerts@tessares.net>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.14 14/38] virtio_net: Do not pull payload in skb->head
Date: Mon, 2 Aug 2021 15:44:36 +0200 [thread overview]
Message-ID: <20210802134335.285560278@linuxfoundation.org> (raw)
In-Reply-To: <20210802134334.835358048@linuxfoundation.org>
From: Eric Dumazet <edumazet@google.com>
commit 0f6925b3e8da0dbbb52447ca8a8b42b371aac7db upstream.
Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs") brought a ~10% performance drop.
The reason for the performance drop was that GRO was forced
to chain sk_buff (using skb_shinfo(skb)->frag_list), which
uses more memory but also cause packet consumers to go over
a lot of overhead handling all the tiny skbs.
It turns out that virtio_net page_to_skb() has a wrong strategy :
It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then
copies 128 bytes from the page, before feeding the packet to GRO stack.
This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs") because GRO was using 2 frags per MSS,
meaning we were not packing MSS with 100% efficiency.
Fix is to pull only the ethernet header in page_to_skb()
Then, we change virtio_net_hdr_to_skb() to pull the missing
headers, instead of assuming they were already pulled by callers.
This fixes the performance regression, but could also allow virtio_net
to accept packets with more than 128bytes of headers.
Many thanks to Xuan Zhuo for his report, and his tests/help.
Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs")
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://www.spinics.net/lists/netdev/msg731397.html
Co-Developed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/virtio_net.c | 10 +++++++---
include/linux/virtio_net.h | 14 +++++++++-----
2 files changed, 16 insertions(+), 8 deletions(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -339,9 +339,13 @@ static struct sk_buff *page_to_skb(struc
offset += hdr_padded_len;
p += hdr_padded_len;
- copy = len;
- if (copy > skb_tailroom(skb))
- copy = skb_tailroom(skb);
+ /* Copy all frame if it fits skb->head, otherwise
+ * we let virtio_net_hdr_to_skb() and GRO pull headers as needed.
+ */
+ if (len <= skb_tailroom(skb))
+ copy = len;
+ else
+ copy = ETH_HLEN;
skb_put_data(skb, p, copy);
len -= copy;
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -65,14 +65,18 @@ static inline int virtio_net_hdr_to_skb(
skb_reset_mac_header(skb);
if (hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
- u16 start = __virtio16_to_cpu(little_endian, hdr->csum_start);
- u16 off = __virtio16_to_cpu(little_endian, hdr->csum_offset);
+ u32 start = __virtio16_to_cpu(little_endian, hdr->csum_start);
+ u32 off = __virtio16_to_cpu(little_endian, hdr->csum_offset);
+ u32 needed = start + max_t(u32, thlen, off + sizeof(__sum16));
+
+ if (!pskb_may_pull(skb, needed))
+ return -EINVAL;
if (!skb_partial_csum_set(skb, start, off))
return -EINVAL;
p_off = skb_transport_offset(skb) + thlen;
- if (p_off > skb_headlen(skb))
+ if (!pskb_may_pull(skb, p_off))
return -EINVAL;
} else {
/* gso packets without NEEDS_CSUM do not set transport_offset.
@@ -100,14 +104,14 @@ retry:
}
p_off = keys.control.thoff + thlen;
- if (p_off > skb_headlen(skb) ||
+ if (!pskb_may_pull(skb, p_off) ||
keys.basic.ip_proto != ip_proto)
return -EINVAL;
skb_set_transport_header(skb, keys.control.thoff);
} else if (gso_type) {
p_off = thlen;
- if (p_off > skb_headlen(skb))
+ if (!pskb_may_pull(skb, p_off))
return -EINVAL;
}
}
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
parent reply other threads:[~2021-08-02 13:48 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20210802134334.835358048@linuxfoundation.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210802134335.285560278@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matthieu.baerts@tessares.net \
--cc=mst@redhat.com \
--cc=stable@vger.kernel.org \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).