From: "Michael S. Tsirkin" <mst@redhat.com>
To: Jason Wang <jasowang@redhat.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>,
david.kaplan@amd.com, konrad.wilk@oracle.com,
Peter Zijlstra <peterz@infradead.org>,
f.hetzelt@tu-berlin.de, linux-kernel@vger.kernel.org,
virtualization@lists.linux-foundation.org,
Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [PATCH V2 06/12] virtio_pci: harden MSI-X interrupts
Date: Wed, 13 Oct 2021 05:59:29 -0400 [thread overview]
Message-ID: <20211013055752-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20211012065227.9953-7-jasowang@redhat.com>
On Tue, Oct 12, 2021 at 02:52:21PM +0800, Jason Wang wrote:
> We used to synchronize pending MSI-X irq handlers via
> synchronize_irq(), this may not work for the untrusted device which
> may keep sending interrupts after reset which may lead unexpected
> results. Similarly, we should not enable MSI-X interrupt until the
> device is ready.
You mean until the driver is ready.
> So this patch fixes those two issues by:
>
> 1) switching to use disable_irq() to prevent the virtio interrupt
> handlers to be called after the device is reset.
> 2) using IRQF_NO_AUTOEN and enable the MSI-X irq during .ready()
>
> This can make sure the virtio interrupt handler won't be called before
> virtio_device_ready() and after reset.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Paul E. McKenney <paulmck@kernel.org>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
> drivers/virtio/virtio_pci_common.c | 27 +++++++++++++++++++++------
> drivers/virtio/virtio_pci_common.h | 6 ++++--
> drivers/virtio/virtio_pci_legacy.c | 5 +++--
> drivers/virtio/virtio_pci_modern.c | 6 ++++--
> 4 files changed, 32 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> index b35bb2d57f62..0b9523e6dd39 100644
> --- a/drivers/virtio/virtio_pci_common.c
> +++ b/drivers/virtio/virtio_pci_common.c
> @@ -24,8 +24,8 @@ MODULE_PARM_DESC(force_legacy,
> "Force legacy mode for transitional virtio 1 devices");
> #endif
>
> -/* wait for pending irq handlers */
> -void vp_synchronize_vectors(struct virtio_device *vdev)
> +/* disable irq handlers */
> +void vp_disable_vectors(struct virtio_device *vdev)
> {
> struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> int i;
> @@ -34,7 +34,20 @@ void vp_synchronize_vectors(struct virtio_device *vdev)
> synchronize_irq(vp_dev->pci_dev->irq);
>
> for (i = 0; i < vp_dev->msix_vectors; ++i)
> - synchronize_irq(pci_irq_vector(vp_dev->pci_dev, i));
> + disable_irq(pci_irq_vector(vp_dev->pci_dev, i));
> +}
> +
> +/* enable irq handlers */
> +void vp_enable_vectors(struct virtio_device *vdev)
> +{
> + struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> + int i;
> +
> + if (vp_dev->intx_enabled)
> + return;
> +
> + for (i = 0; i < vp_dev->msix_vectors; ++i)
> + enable_irq(pci_irq_vector(vp_dev->pci_dev, i));
> }
>
> /* the notify function used when creating a virt queue */
> @@ -141,7 +154,8 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
> snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
> "%s-config", name);
> err = request_irq(pci_irq_vector(vp_dev->pci_dev, v),
> - vp_config_changed, 0, vp_dev->msix_names[v],
> + vp_config_changed, IRQF_NO_AUTOEN,
> + vp_dev->msix_names[v],
> vp_dev);
> if (err)
> goto error;
> @@ -160,7 +174,8 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
> snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
> "%s-virtqueues", name);
> err = request_irq(pci_irq_vector(vp_dev->pci_dev, v),
> - vp_vring_interrupt, 0, vp_dev->msix_names[v],
> + vp_vring_interrupt, IRQF_NO_AUTOEN,
> + vp_dev->msix_names[v],
> vp_dev);
> if (err)
> goto error;
> @@ -337,7 +352,7 @@ static int vp_find_vqs_msix(struct virtio_device *vdev, unsigned nvqs,
> "%s-%s",
> dev_name(&vp_dev->vdev.dev), names[i]);
> err = request_irq(pci_irq_vector(vp_dev->pci_dev, msix_vec),
> - vring_interrupt, 0,
> + vring_interrupt, IRQF_NO_AUTOEN,
> vp_dev->msix_names[msix_vec],
> vqs[i]);
> if (err)
> diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h
> index beec047a8f8d..a235ce9ff6a5 100644
> --- a/drivers/virtio/virtio_pci_common.h
> +++ b/drivers/virtio/virtio_pci_common.h
> @@ -102,8 +102,10 @@ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
> return container_of(vdev, struct virtio_pci_device, vdev);
> }
>
> -/* wait for pending irq handlers */
> -void vp_synchronize_vectors(struct virtio_device *vdev);
> +/* disable irq handlers */
> +void vp_disable_vectors(struct virtio_device *vdev);
> +/* enable irq handlers */
> +void vp_enable_vectors(struct virtio_device *vdev);
> /* the notify function used when creating a virt queue */
> bool vp_notify(struct virtqueue *vq);
> /* the config->del_vqs() implementation */
> diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
> index d62e9835aeec..bdf6bc667ab5 100644
> --- a/drivers/virtio/virtio_pci_legacy.c
> +++ b/drivers/virtio/virtio_pci_legacy.c
> @@ -97,8 +97,8 @@ static void vp_reset(struct virtio_device *vdev)
> /* Flush out the status write, and flush in device writes,
> * including MSi-X interrupts, if any. */
> ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS);
> - /* Flush pending VQ/configuration callbacks. */
> - vp_synchronize_vectors(vdev);
> + /* Disable VQ/configuration callbacks. */
> + vp_disable_vectors(vdev);
> }
>
> static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
> @@ -194,6 +194,7 @@ static void del_vq(struct virtio_pci_vq_info *info)
> }
>
> static const struct virtio_config_ops virtio_pci_config_ops = {
> + .ready = vp_enable_vectors,
> .get = vp_get,
> .set = vp_set,
> .get_status = vp_get_status,
> diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
> index 30654d3a0b41..acf0f6b6381d 100644
> --- a/drivers/virtio/virtio_pci_modern.c
> +++ b/drivers/virtio/virtio_pci_modern.c
> @@ -172,8 +172,8 @@ static void vp_reset(struct virtio_device *vdev)
> */
> while (vp_modern_get_status(mdev))
> msleep(1);
> - /* Flush pending VQ/configuration callbacks. */
> - vp_synchronize_vectors(vdev);
> + /* Disable VQ/configuration callbacks. */
> + vp_disable_vectors(vdev);
> }
>
> static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector)
> @@ -380,6 +380,7 @@ static bool vp_get_shm_region(struct virtio_device *vdev,
> }
>
> static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> + .ready = vp_enable_vectors,
> .get = NULL,
> .set = NULL,
> .generation = vp_generation,
> @@ -397,6 +398,7 @@ static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
> };
>
> static const struct virtio_config_ops virtio_pci_config_ops = {
> + .ready = vp_enable_vectors,
> .get = vp_get,
> .set = vp_set,
> .generation = vp_generation,
> --
> 2.25.1
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
next prev parent reply other threads:[~2021-10-13 9:59 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-12 6:52 [PATCH V2 00/12] More virtio hardening Jason Wang
2021-10-12 6:52 ` [PATCH V2 01/12] virtio-blk: validate num_queues during probe Jason Wang
2021-10-13 10:04 ` Michael S. Tsirkin
2021-10-14 2:32 ` Jason Wang
2021-10-14 5:45 ` Michael S. Tsirkin
2021-10-14 6:23 ` Jason Wang
2021-10-12 6:52 ` [PATCH V2 02/12] virtio: add doc for validate() method Jason Wang
2021-10-13 10:09 ` Michael S. Tsirkin
2021-10-14 2:32 ` Jason Wang
2021-10-12 6:52 ` [PATCH V2 03/12] virtio-console: switch to use .validate() Jason Wang
2021-10-13 9:50 ` Michael S. Tsirkin
2021-10-14 2:28 ` Jason Wang
2021-10-14 5:58 ` Michael S. Tsirkin
2021-10-12 6:52 ` [PATCH V2 04/12] virtio_console: validate max_nr_ports before trying to use it Jason Wang
2021-10-12 6:52 ` [PATCH V2 05/12] virtio_config: introduce a new ready method Jason Wang
2021-10-13 9:57 ` Michael S. Tsirkin
2021-10-12 6:52 ` [PATCH V2 06/12] virtio_pci: harden MSI-X interrupts Jason Wang
2021-10-13 9:59 ` Michael S. Tsirkin [this message]
2021-10-14 2:29 ` Jason Wang
2021-10-15 12:09 ` Dongli Zhang
2021-10-15 17:27 ` Michael S. Tsirkin
2021-10-19 1:33 ` Jason Wang
2021-10-19 17:01 ` Dongli Zhang
2021-10-20 1:33 ` Jason Wang
2021-10-20 6:56 ` Michael S. Tsirkin
2021-10-12 6:52 ` [PATCH V2 07/12] virtio-pci: harden INTX interrupts Jason Wang
2021-10-13 9:42 ` Michael S. Tsirkin
2021-10-14 2:35 ` Jason Wang
2021-10-14 5:49 ` Michael S. Tsirkin
2021-10-14 6:20 ` Jason Wang
2021-10-14 6:26 ` Michael S. Tsirkin
2021-10-14 6:32 ` Jason Wang
2021-10-14 7:04 ` Michael S. Tsirkin
2021-10-14 7:12 ` Jason Wang
2021-10-14 9:25 ` Michael S. Tsirkin
2021-10-14 10:03 ` Jason Wang
2021-10-12 6:52 ` [PATCH V2 08/12] virtio_ring: fix typos in vring_desc_extra Jason Wang
2021-10-12 6:52 ` [PATCH V2 09/12] virtio_ring: validate used buffer length Jason Wang
2021-10-13 10:02 ` Michael S. Tsirkin
2021-10-14 2:30 ` Jason Wang
2021-10-12 6:52 ` [PATCH V2 10/12] virtio-net: don't let virtio core to validate used length Jason Wang
2021-10-12 6:52 ` [PATCH V2 11/12] virtio-blk: " Jason Wang
2021-10-12 6:52 ` [PATCH V2 12/12] virtio-scsi: don't let virtio core to validate used buffer length Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211013055752-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=david.kaplan@amd.com \
--cc=f.hetzelt@tu-berlin.de \
--cc=jasowang@redhat.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).