[PATCH AUTOSEL 5.15 03/18] vdpa/mlx5: Initialize CVQ vringh only once

[PATCH AUTOSEL 5.15 03/18] vdpa/mlx5: Initialize CVQ vringh only once

[Sasha Levin]

From: Eli Cohen <elic@nvidia.com>

[ Upstream commit ace9252446ec615cd79a5f77d90edb25c0b9d024 ]

Currently, CVQ vringh is initialized inside setup_virtqueues() which is
called every time a memory update is done. This is undesirable since it
resets all the context of the vring, including the available and used
indices.

Move the initialization to mlx5_vdpa_set_status() when
VIRTIO_CONFIG_S_DRIVER_OK is set.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220613075958.511064-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index e4258f40dcd7..26bd5bba0d89 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1896,7 +1896,6 @@ static int verify_driver_features(struct mlx5_vdpa_dev *mvdev, u64 features)
 static int setup_virtqueues(struct mlx5_vdpa_dev *mvdev)
 {
 	struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev);
-	struct mlx5_control_vq *cvq = &mvdev->cvq;
 	int err;
 	int i;
 
@@ -1906,16 +1905,6 @@ static int setup_virtqueues(struct mlx5_vdpa_dev *mvdev)
 			goto err_vq;
 	}
 
-	if (mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ)) {
-		err = vringh_init_iotlb(&cvq->vring, mvdev->actual_features,
-					MLX5_CVQ_MAX_ENT, false,
-					(struct vring_desc *)(uintptr_t)cvq->desc_addr,
-					(struct vring_avail *)(uintptr_t)cvq->driver_addr,
-					(struct vring_used *)(uintptr_t)cvq->device_addr);
-		if (err)
-			goto err_vq;
-	}
-
 	return 0;
 
 err_vq:
@@ -2182,6 +2171,21 @@ static void clear_vqs_ready(struct mlx5_vdpa_net *ndev)
 	ndev->mvdev.cvq.ready = false;
 }
 
+static int setup_cvq_vring(struct mlx5_vdpa_dev *mvdev)
+{
+	struct mlx5_control_vq *cvq = &mvdev->cvq;
+	int err = 0;
+
+	if (mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ))
+		err = vringh_init_iotlb(&cvq->vring, mvdev->actual_features,
+					MLX5_CVQ_MAX_ENT, false,
+					(struct vring_desc *)(uintptr_t)cvq->desc_addr,
+					(struct vring_avail *)(uintptr_t)cvq->driver_addr,
+					(struct vring_used *)(uintptr_t)cvq->device_addr);
+
+	return err;
+}
+
 static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
 {
 	struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev);
@@ -2192,6 +2196,11 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
 
 	if ((status ^ ndev->mvdev.status) & VIRTIO_CONFIG_S_DRIVER_OK) {
 		if (status & VIRTIO_CONFIG_S_DRIVER_OK) {
+			err = setup_cvq_vring(mvdev);
+			if (err) {
+				mlx5_vdpa_warn(mvdev, "failed to setup control VQ vring\n");
+				goto err_setup;
+			}
 			err = setup_driver(mvdev);
 			if (err) {
 				mlx5_vdpa_warn(mvdev, "failed to setup driver\n");
-- 
2.35.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH AUTOSEL 5.15 04/18] vduse: Tie vduse mgmtdev and its device

[Sasha Levin]

From: Parav Pandit <parav@nvidia.com>

[ Upstream commit 0e0348ac3f0a6e6606f1aa5acb1803ada913aa3d ]

vduse devices are not backed by any real devices such as PCI. Hence it
doesn't have any parent device linked to it.

Kernel driver model in [1] suggests to avoid an empty device
release callback.

Hence tie the mgmtdevice object's life cycle to an allocate dummy struct
device instead of static one.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/core-api/kobject.rst?h=v5.18-rc7#n284

Signed-off-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20220613195223.473966-1-parav@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/vdpa_user/vduse_dev.c | 60 ++++++++++++++++++------------
 1 file changed, 37 insertions(+), 23 deletions(-)

diff --git a/drivers/vdpa/vdpa_user/vduse_dev.c b/drivers/vdpa/vdpa_user/vduse_dev.c
index 9270398caf15..73e67fa88972 100644
--- a/drivers/vdpa/vdpa_user/vduse_dev.c
+++ b/drivers/vdpa/vdpa_user/vduse_dev.c
@@ -1466,16 +1466,12 @@ static char *vduse_devnode(struct device *dev, umode_t *mode)
 	return kasprintf(GFP_KERNEL, "vduse/%s", dev_name(dev));
 }
 
-static void vduse_mgmtdev_release(struct device *dev)
-{
-}
-
-static struct device vduse_mgmtdev = {
-	.init_name = "vduse",
-	.release = vduse_mgmtdev_release,
+struct vduse_mgmt_dev {
+	struct vdpa_mgmt_dev mgmt_dev;
+	struct device dev;
 };
 
-static struct vdpa_mgmt_dev mgmt_dev;
+static struct vduse_mgmt_dev *vduse_mgmt;
 
 static int vduse_dev_init_vdpa(struct vduse_dev *dev, const char *name)
 {
@@ -1500,7 +1496,7 @@ static int vduse_dev_init_vdpa(struct vduse_dev *dev, const char *name)
 	}
 	set_dma_ops(&vdev->vdpa.dev, &vduse_dev_dma_ops);
 	vdev->vdpa.dma_dev = &vdev->vdpa.dev;
-	vdev->vdpa.mdev = &mgmt_dev;
+	vdev->vdpa.mdev = &vduse_mgmt->mgmt_dev;
 
 	return 0;
 }
@@ -1545,34 +1541,52 @@ static struct virtio_device_id id_table[] = {
 	{ 0 },
 };
 
-static struct vdpa_mgmt_dev mgmt_dev = {
-	.device = &vduse_mgmtdev,
-	.id_table = id_table,
-	.ops = &vdpa_dev_mgmtdev_ops,
-};
+static void vduse_mgmtdev_release(struct device *dev)
+{
+	struct vduse_mgmt_dev *mgmt_dev;
+
+	mgmt_dev = container_of(dev, struct vduse_mgmt_dev, dev);
+	kfree(mgmt_dev);
+}
 
 static int vduse_mgmtdev_init(void)
 {
 	int ret;
 
-	ret = device_register(&vduse_mgmtdev);
-	if (ret)
+	vduse_mgmt = kzalloc(sizeof(*vduse_mgmt), GFP_KERNEL);
+	if (!vduse_mgmt)
+		return -ENOMEM;
+
+	ret = dev_set_name(&vduse_mgmt->dev, "vduse");
+	if (ret) {
+		kfree(vduse_mgmt);
 		return ret;
+	}
 
-	ret = vdpa_mgmtdev_register(&mgmt_dev);
+	vduse_mgmt->dev.release = vduse_mgmtdev_release;
+
+	ret = device_register(&vduse_mgmt->dev);
 	if (ret)
-		goto err;
+		goto dev_reg_err;
 
-	return 0;
-err:
-	device_unregister(&vduse_mgmtdev);
+	vduse_mgmt->mgmt_dev.id_table = id_table;
+	vduse_mgmt->mgmt_dev.ops = &vdpa_dev_mgmtdev_ops;
+	vduse_mgmt->mgmt_dev.device = &vduse_mgmt->dev;
+	ret = vdpa_mgmtdev_register(&vduse_mgmt->mgmt_dev);
+	if (ret)
+		device_unregister(&vduse_mgmt->dev);
+
+	return ret;
+
+dev_reg_err:
+	put_device(&vduse_mgmt->dev);
 	return ret;
 }
 
 static void vduse_mgmtdev_exit(void)
 {
-	vdpa_mgmtdev_unregister(&mgmt_dev);
-	device_unregister(&vduse_mgmtdev);
+	vdpa_mgmtdev_unregister(&vduse_mgmt->mgmt_dev);
+	device_unregister(&vduse_mgmt->dev);
 }
 
 static int vduse_init(void)
-- 
2.35.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH AUTOSEL 5.15 05/18] virtio_mmio: Add missing PM calls to freeze/restore

[Sasha Levin]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ]

Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.

This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.

Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 1dd396d4bebb..7522832529dd 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -62,6 +62,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/virtio.h>
@@ -543,6 +544,25 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.get_shm_region = vm_get_shm_region,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int virtio_mmio_freeze(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_freeze(&vm_dev->vdev);
+}
+
+static int virtio_mmio_restore(struct device *dev)
+{
+	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
+
+	return virtio_device_restore(&vm_dev->vdev);
+}
+
+static const struct dev_pm_ops virtio_mmio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(virtio_mmio_freeze, virtio_mmio_restore)
+};
+#endif
 
 static void virtio_mmio_release_dev(struct device *_d)
 {
@@ -786,6 +806,9 @@ static struct platform_driver virtio_mmio_driver = {
 		.name	= "virtio-mmio",
 		.of_match_table	= virtio_mmio_match,
 		.acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &virtio_mmio_pm_ops,
+#endif
 	},
 };
 
-- 
2.35.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[PATCH AUTOSEL 5.15 06/18] virtio_mmio: Restore guest page size on resume

[Sasha Levin]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ]

Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.

This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 7522832529dd..fe696aafaed8 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -556,6 +556,9 @@ static int virtio_mmio_restore(struct device *dev)
 {
 	struct virtio_mmio_device *vm_dev = dev_get_drvdata(dev);
 
+	if (vm_dev->version == 1)
+		writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
 	return virtio_device_restore(&vm_dev->vdev);
 }
 
-- 
2.35.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization