* Re: [PATCH] vdpasim: support doorbell mapping [not found] <20221128025558.2152-1-longpeng2@huawei.com> @ 2022-11-28 4:05 ` Jason Wang [not found] ` <53edc14a-74bb-f9c7-06bd-7ea1047fe613@huawei.com> 0 siblings, 1 reply; 6+ messages in thread From: Jason Wang @ 2022-11-28 4:05 UTC (permalink / raw) To: Longpeng(Mike) Cc: mst, cohuck, linux-kernel, yechuan, eperezma, huangzhichao, stefanha, virtualization On Mon, Nov 28, 2022 at 10:56 AM Longpeng(Mike) <longpeng2@huawei.com> wrote: > > From: Longpeng <longpeng2@huawei.com> > > Support doorbell mapping for vdpasim devices, then we can test the notify > passthrough feature even if there's no real hardware on hand. You can use vp_vdpa in L1 plus page_ver_vq in L0 to test it in L2. That is how I test it. > > Allocates a dummy page which used to emulate the notify page of the device. > All values written to this page would be ignored, a periodic work will > check whether there're requests that need to process. This seems tricky, it means the device is working even if there's no kick. If we really want to do, we should try to use page fault handler (probably by extending the config ops), but I'm not sure it's worth to bother (or if we can find a use case for no simulator devices). > > This cap is disabled as default, users can enable it as follow: > modprobe vdpa_sim notify_passthrough=true > > Signed-off-by: Longpeng <longpeng2@huawei.com> > --- > drivers/vdpa/vdpa_sim/vdpa_sim.c | 71 ++++++++++++++++++++++++++-- > drivers/vdpa/vdpa_sim/vdpa_sim.h | 5 +- > drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 5 +- > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 4 +- > 4 files changed, 76 insertions(+), 9 deletions(-) > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > index 7438a89ce939..5c215b56b78b 100644 > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > @@ -14,6 +14,7 @@ > #include <linux/slab.h> > #include <linux/sched.h> > #include <linux/dma-map-ops.h> > +#include <asm/set_memory.h> > #include <linux/vringh.h> > #include <linux/vdpa.h> > #include <linux/vhost_iotlb.h> > @@ -36,9 +37,15 @@ module_param(max_iotlb_entries, int, 0444); > MODULE_PARM_DESC(max_iotlb_entries, > "Maximum number of iotlb entries for each address space. 0 means unlimited. (default: 2048)"); > > +static bool notify_passthrough; > +module_param(notify_passthrough, bool, 0444); > +MODULE_PARM_DESC(notify_passthrough, > + "Enable vq notify(doorbell) area mapping. (default: false)"); > + > #define VDPASIM_QUEUE_ALIGN PAGE_SIZE > #define VDPASIM_QUEUE_MAX 256 > #define VDPASIM_VENDOR_ID 0 > +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */ > > static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa) > { > @@ -276,7 +283,7 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > } > > vdpasim->dev_attr = *dev_attr; > - INIT_WORK(&vdpasim->work, dev_attr->work_fn); > + INIT_DELAYED_WORK(&vdpasim->vring_work, dev_attr->work_fn); > spin_lock_init(&vdpasim->lock); > spin_lock_init(&vdpasim->iommu_lock); > > @@ -287,6 +294,15 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > set_dma_ops(dev, &vdpasim_dma_ops); > vdpasim->vdpa.mdev = dev_attr->mgmt_dev; > > + if (notify_passthrough) { > + vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO); > + if (!vdpasim->notify) > + goto err_iommu; > +#ifdef CONFIG_X86 > + set_memory_uc(vdpasim->notify, 1); > +#endif What's the reason for using uc memory? > + } > + > vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL); > if (!vdpasim->config) > goto err_iommu; > @@ -357,8 +373,11 @@ static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx) > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx]; > > + if (notify_passthrough) > + return; So we should keep the two paths to be used at the same time. Userspace can choose to not map doorbells? Thanks > + > if (vq->ready) > - schedule_work(&vdpasim->work); > + schedule_work(&vdpasim->vring_work.work); > } > > static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx, > @@ -495,6 +514,18 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa) > return status; > } > > +static void vdpasim_set_vring_work(struct vdpasim *vdpasim, bool start) > +{ > + if (!notify_passthrough) > + return; > + > + if (start) > + schedule_delayed_work(&vdpasim->vring_work, > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > + else > + cancel_delayed_work_sync(&vdpasim->vring_work); > +} > + > static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > { > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > @@ -502,12 +533,16 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > spin_lock(&vdpasim->lock); > vdpasim->status = status; > spin_unlock(&vdpasim->lock); > + > + vdpasim_set_vring_work(vdpasim, status & VIRTIO_CONFIG_S_DRIVER_OK); > } > > static int vdpasim_reset(struct vdpa_device *vdpa, bool clear) > { > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > + vdpasim_set_vring_work(vdpasim, false); > + > spin_lock(&vdpasim->lock); > vdpasim->status = 0; > vdpasim_do_reset(vdpasim); > @@ -672,12 +707,24 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid, > return 0; > } > > +static struct vdpa_notification_area > +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid) > +{ > + struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > + struct vdpa_notification_area notify; > + > + notify.addr = virt_to_phys((void *)vdpasim->notify); > + notify.size = PAGE_SIZE; > + > + return notify; > +} > + > static void vdpasim_free(struct vdpa_device *vdpa) > { > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > int i; > > - cancel_work_sync(&vdpasim->work); > + cancel_delayed_work_sync(&vdpasim->vring_work); > > for (i = 0; i < vdpasim->dev_attr.nvqs; i++) { > vringh_kiov_cleanup(&vdpasim->vqs[i].out_iov); > @@ -693,7 +740,23 @@ static void vdpasim_free(struct vdpa_device *vdpa) > vhost_iotlb_free(vdpasim->iommu); > kfree(vdpasim->vqs); > kfree(vdpasim->config); > + if (vdpasim->notify) { > +#ifdef CONFIG_X86 > + set_memory_wb(vdpasim->notify, 1); > +#endif > + free_page(vdpasim->notify); > + } > +} > + > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now) > +{ > + if (sched_now) > + schedule_work(&vdpasim->vring_work.work); > + else if (notify_passthrough) > + schedule_delayed_work(&vdpasim->vring_work, > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > } > +EXPORT_SYMBOL_GPL(vdpasim_schedule_work); > > static const struct vdpa_config_ops vdpasim_config_ops = { > .set_vq_address = vdpasim_set_vq_address, > @@ -704,6 +767,7 @@ static const struct vdpa_config_ops vdpasim_config_ops = { > .get_vq_ready = vdpasim_get_vq_ready, > .set_vq_state = vdpasim_set_vq_state, > .get_vq_state = vdpasim_get_vq_state, > + .get_vq_notification = vdpasim_get_vq_notification, > .get_vq_align = vdpasim_get_vq_align, > .get_vq_group = vdpasim_get_vq_group, > .get_device_features = vdpasim_get_device_features, > @@ -737,6 +801,7 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = { > .get_vq_ready = vdpasim_get_vq_ready, > .set_vq_state = vdpasim_set_vq_state, > .get_vq_state = vdpasim_get_vq_state, > + .get_vq_notification = vdpasim_get_vq_notification, > .get_vq_align = vdpasim_get_vq_align, > .get_vq_group = vdpasim_get_vq_group, > .get_device_features = vdpasim_get_device_features, > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h > index 0e78737dcc16..da0866834918 100644 > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h > @@ -53,7 +53,7 @@ struct vdpasim_dev_attr { > struct vdpasim { > struct vdpa_device vdpa; > struct vdpasim_virtqueue *vqs; > - struct work_struct work; > + struct delayed_work vring_work; > struct vdpasim_dev_attr dev_attr; > /* spinlock to synchronize virtqueue state */ > spinlock_t lock; > @@ -69,10 +69,13 @@ struct vdpasim { > bool running; > /* spinlock to synchronize iommu table */ > spinlock_t iommu_lock; > + /* dummy notify page */ > + unsigned long notify; > }; > > struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr, > const struct vdpa_dev_set_config *config); > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now); > > /* TODO: cross-endian support */ > static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim) > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > index c6db1a1baf76..8a640ea82284 100644 > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > @@ -288,7 +288,7 @@ static bool vdpasim_blk_handle_req(struct vdpasim *vdpasim, > > static void vdpasim_blk_work(struct work_struct *work) > { > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > bool reschedule = false; > int i; > > @@ -325,8 +325,7 @@ static void vdpasim_blk_work(struct work_struct *work) > out: > spin_unlock(&vdpasim->lock); > > - if (reschedule) > - schedule_work(&vdpasim->work); > + vdpasim_schedule_work(vdpasim, reschedule); > } > > static void vdpasim_blk_get_config(struct vdpasim *vdpasim, void *config) > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > index c3cb225ea469..8b998952384b 100644 > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > @@ -145,7 +145,7 @@ static void vdpasim_handle_cvq(struct vdpasim *vdpasim) > > static void vdpasim_net_work(struct work_struct *work) > { > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > struct vdpasim_virtqueue *txq = &vdpasim->vqs[1]; > struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0]; > ssize_t read, write; > @@ -196,7 +196,7 @@ static void vdpasim_net_work(struct work_struct *work) > vdpasim_net_complete(rxq, write); > > if (++pkts > 4) { > - schedule_work(&vdpasim->work); > + vdpasim_schedule_work(vdpasim, true); > goto out; > } > } > -- > 2.23.0 > _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <53edc14a-74bb-f9c7-06bd-7ea1047fe613@huawei.com>]
* Re: [PATCH] vdpasim: support doorbell mapping [not found] ` <53edc14a-74bb-f9c7-06bd-7ea1047fe613@huawei.com> @ 2022-11-28 10:19 ` Michael S. Tsirkin [not found] ` <28c1ae52-38ff-42ce-4331-11f7aa040296@huawei.com> 0 siblings, 1 reply; 6+ messages in thread From: Michael S. Tsirkin @ 2022-11-28 10:19 UTC (permalink / raw) To: Longpeng (Mike, Cloud Infrastructure Service Product Dept.) Cc: cohuck, linux-kernel, yechuan, eperezma, huangzhichao, stefanha, virtualization On Mon, Nov 28, 2022 at 04:19:30PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > 在 2022/11/28 12:05, Jason Wang 写道: > > On Mon, Nov 28, 2022 at 10:56 AM Longpeng(Mike) <longpeng2@huawei.com> wrote: > > > > > > From: Longpeng <longpeng2@huawei.com> > > > > > > Support doorbell mapping for vdpasim devices, then we can test the notify > > > passthrough feature even if there's no real hardware on hand. > > > > You can use vp_vdpa in L1 plus page_ver_vq in L0 to test it in L2. > > That is how I test it. > > > Yes, using nested virtualization can work, but it's hard to deploy in my > working environment for some reasons, so I decided to emulate this > capability in vdpasim, it's much easier. > > > > > > > Allocates a dummy page which used to emulate the notify page of the device. > > > All values written to this page would be ignored, a periodic work will > > > check whether there're requests that need to process. > > > > This seems tricky, it means the device is working even if there's no > > Right. It just try to make the vdpasim device work properly, but the vdpasim > device is only used for testing, so maybe the tricky emulation is > acceptable? Maybe. You can try enabling VIRTIO_F_NOTIFICATION_DATA and then looking at the data written to figure out whether you need to poll the vq. > > kick. If we really want to do, we should try to use page fault handler > > (probably by extending the config ops), but I'm not sure it's worth to > > bother (or if we can find a use case for no simulator devices). > > > This need to modify the framework, it seems unworthy. > > > > > > > This cap is disabled as default, users can enable it as follow: > > > modprobe vdpa_sim notify_passthrough=true > > > > > > Signed-off-by: Longpeng <longpeng2@huawei.com> > > > --- > > > drivers/vdpa/vdpa_sim/vdpa_sim.c | 71 ++++++++++++++++++++++++++-- > > > drivers/vdpa/vdpa_sim/vdpa_sim.h | 5 +- > > > drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 5 +- > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 4 +- > > > 4 files changed, 76 insertions(+), 9 deletions(-) > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > index 7438a89ce939..5c215b56b78b 100644 > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > @@ -14,6 +14,7 @@ > > > #include <linux/slab.h> > > > #include <linux/sched.h> > > > #include <linux/dma-map-ops.h> > > > +#include <asm/set_memory.h> > > > #include <linux/vringh.h> > > > #include <linux/vdpa.h> > > > #include <linux/vhost_iotlb.h> > > > @@ -36,9 +37,15 @@ module_param(max_iotlb_entries, int, 0444); > > > MODULE_PARM_DESC(max_iotlb_entries, > > > "Maximum number of iotlb entries for each address space. 0 means unlimited. (default: 2048)"); > > > > > > +static bool notify_passthrough; > > > +module_param(notify_passthrough, bool, 0444); > > > +MODULE_PARM_DESC(notify_passthrough, > > > + "Enable vq notify(doorbell) area mapping. (default: false)"); > > > + > > > #define VDPASIM_QUEUE_ALIGN PAGE_SIZE > > > #define VDPASIM_QUEUE_MAX 256 > > > #define VDPASIM_VENDOR_ID 0 > > > +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */ > > > > > > static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa) > > > { > > > @@ -276,7 +283,7 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > } > > > > > > vdpasim->dev_attr = *dev_attr; > > > - INIT_WORK(&vdpasim->work, dev_attr->work_fn); > > > + INIT_DELAYED_WORK(&vdpasim->vring_work, dev_attr->work_fn); > > > spin_lock_init(&vdpasim->lock); > > > spin_lock_init(&vdpasim->iommu_lock); > > > > > > @@ -287,6 +294,15 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > set_dma_ops(dev, &vdpasim_dma_ops); > > > vdpasim->vdpa.mdev = dev_attr->mgmt_dev; > > > > > > + if (notify_passthrough) { > > > + vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO); > > > + if (!vdpasim->notify) > > > + goto err_iommu; > > > +#ifdef CONFIG_X86 > > > + set_memory_uc(vdpasim->notify, 1); > > > +#endif > > > > What's the reason for using uc memory? > > > The vma->vm_page_prot of notify mapping is pgprot_noncached (see > vhost_vdpa_fault) but the vdpasim->notify is WB, so we should set its > memtype to UC here and set it back to WB when releasing the device. You never look at this memory though. Why does it matter whether it's UC or WB? > > > + } > > > + > > > vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL); > > > if (!vdpasim->config) > > > goto err_iommu; > > > @@ -357,8 +373,11 @@ static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx) > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx]; > > > > > > + if (notify_passthrough) > > > + return; > > > > So we should keep the two paths to be used at the same time. Userspace > > can choose to not map doorbells? > > > It can work even if the userspace does not to map doorbells (e.g start > without page-per-vq=on), because the device will periodic check its vqs. > > > Thanks > > > > > + > > > if (vq->ready) > > > - schedule_work(&vdpasim->work); > > > + schedule_work(&vdpasim->vring_work.work); > > > } > > > > > > static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx, > > > @@ -495,6 +514,18 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa) > > > return status; > > > } > > > > > > +static void vdpasim_set_vring_work(struct vdpasim *vdpasim, bool start) > > > +{ > > > + if (!notify_passthrough) > > > + return; > > > + > > > + if (start) > > > + schedule_delayed_work(&vdpasim->vring_work, > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > + else > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > +} > > > + > > > static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > { > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > @@ -502,12 +533,16 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > spin_lock(&vdpasim->lock); > > > vdpasim->status = status; > > > spin_unlock(&vdpasim->lock); > > > + > > > + vdpasim_set_vring_work(vdpasim, status & VIRTIO_CONFIG_S_DRIVER_OK); > > > } > > > > > > static int vdpasim_reset(struct vdpa_device *vdpa, bool clear) > > > { > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > + vdpasim_set_vring_work(vdpasim, false); > > > + > > > spin_lock(&vdpasim->lock); > > > vdpasim->status = 0; > > > vdpasim_do_reset(vdpasim); > > > @@ -672,12 +707,24 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid, > > > return 0; > > > } > > > > > > +static struct vdpa_notification_area > > > +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid) > > > +{ > > > + struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > + struct vdpa_notification_area notify; > > > + > > > + notify.addr = virt_to_phys((void *)vdpasim->notify); > > > + notify.size = PAGE_SIZE; > > > + > > > + return notify; > > > +} > > > + > > > static void vdpasim_free(struct vdpa_device *vdpa) > > > { > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > int i; > > > > > > - cancel_work_sync(&vdpasim->work); > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > > for (i = 0; i < vdpasim->dev_attr.nvqs; i++) { > > > vringh_kiov_cleanup(&vdpasim->vqs[i].out_iov); > > > @@ -693,7 +740,23 @@ static void vdpasim_free(struct vdpa_device *vdpa) > > > vhost_iotlb_free(vdpasim->iommu); > > > kfree(vdpasim->vqs); > > > kfree(vdpasim->config); > > > + if (vdpasim->notify) { > > > +#ifdef CONFIG_X86 > > > + set_memory_wb(vdpasim->notify, 1); > > > +#endif > > > + free_page(vdpasim->notify); > > > + } > > > +} > > > + > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now) > > > +{ > > > + if (sched_now) > > > + schedule_work(&vdpasim->vring_work.work); > > > + else if (notify_passthrough) > > > + schedule_delayed_work(&vdpasim->vring_work, > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > } > > > +EXPORT_SYMBOL_GPL(vdpasim_schedule_work); > > > > > > static const struct vdpa_config_ops vdpasim_config_ops = { > > > .set_vq_address = vdpasim_set_vq_address, > > > @@ -704,6 +767,7 @@ static const struct vdpa_config_ops vdpasim_config_ops = { > > > .get_vq_ready = vdpasim_get_vq_ready, > > > .set_vq_state = vdpasim_set_vq_state, > > > .get_vq_state = vdpasim_get_vq_state, > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > .get_vq_align = vdpasim_get_vq_align, > > > .get_vq_group = vdpasim_get_vq_group, > > > .get_device_features = vdpasim_get_device_features, > > > @@ -737,6 +801,7 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = { > > > .get_vq_ready = vdpasim_get_vq_ready, > > > .set_vq_state = vdpasim_set_vq_state, > > > .get_vq_state = vdpasim_get_vq_state, > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > .get_vq_align = vdpasim_get_vq_align, > > > .get_vq_group = vdpasim_get_vq_group, > > > .get_device_features = vdpasim_get_device_features, > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > index 0e78737dcc16..da0866834918 100644 > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > @@ -53,7 +53,7 @@ struct vdpasim_dev_attr { > > > struct vdpasim { > > > struct vdpa_device vdpa; > > > struct vdpasim_virtqueue *vqs; > > > - struct work_struct work; > > > + struct delayed_work vring_work; > > > struct vdpasim_dev_attr dev_attr; > > > /* spinlock to synchronize virtqueue state */ > > > spinlock_t lock; > > > @@ -69,10 +69,13 @@ struct vdpasim { > > > bool running; > > > /* spinlock to synchronize iommu table */ > > > spinlock_t iommu_lock; > > > + /* dummy notify page */ > > > + unsigned long notify; > > > }; > > > > > > struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr, > > > const struct vdpa_dev_set_config *config); > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now); > > > > > > /* TODO: cross-endian support */ > > > static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim) > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > index c6db1a1baf76..8a640ea82284 100644 > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > @@ -288,7 +288,7 @@ static bool vdpasim_blk_handle_req(struct vdpasim *vdpasim, > > > > > > static void vdpasim_blk_work(struct work_struct *work) > > > { > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > bool reschedule = false; > > > int i; > > > > > > @@ -325,8 +325,7 @@ static void vdpasim_blk_work(struct work_struct *work) > > > out: > > > spin_unlock(&vdpasim->lock); > > > > > > - if (reschedule) > > > - schedule_work(&vdpasim->work); > > > + vdpasim_schedule_work(vdpasim, reschedule); > > > } > > > > > > static void vdpasim_blk_get_config(struct vdpasim *vdpasim, void *config) > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > index c3cb225ea469..8b998952384b 100644 > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > @@ -145,7 +145,7 @@ static void vdpasim_handle_cvq(struct vdpasim *vdpasim) > > > > > > static void vdpasim_net_work(struct work_struct *work) > > > { > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > struct vdpasim_virtqueue *txq = &vdpasim->vqs[1]; > > > struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0]; > > > ssize_t read, write; > > > @@ -196,7 +196,7 @@ static void vdpasim_net_work(struct work_struct *work) > > > vdpasim_net_complete(rxq, write); > > > > > > if (++pkts > 4) { > > > - schedule_work(&vdpasim->work); > > > + vdpasim_schedule_work(vdpasim, true); > > > goto out; > > > } > > > } > > > -- > > > 2.23.0 > > > > > > > . _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <28c1ae52-38ff-42ce-4331-11f7aa040296@huawei.com>]
* Re: [PATCH] vdpasim: support doorbell mapping [not found] ` <28c1ae52-38ff-42ce-4331-11f7aa040296@huawei.com> @ 2022-11-28 12:20 ` Michael S. Tsirkin [not found] ` <9e9545ab-312c-c9c1-c8ae-8bd6b9f8add6@huawei.com> 0 siblings, 1 reply; 6+ messages in thread From: Michael S. Tsirkin @ 2022-11-28 12:20 UTC (permalink / raw) To: Longpeng (Mike, Cloud Infrastructure Service Product Dept.) Cc: cohuck, linux-kernel, yechuan, eperezma, huangzhichao, stefanha, virtualization On Mon, Nov 28, 2022 at 07:59:33PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > 在 2022/11/28 18:19, Michael S. Tsirkin 写道: > > On Mon, Nov 28, 2022 at 04:19:30PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > > > > > > > 在 2022/11/28 12:05, Jason Wang 写道: > > > > On Mon, Nov 28, 2022 at 10:56 AM Longpeng(Mike) <longpeng2@huawei.com> wrote: > > > > > > > > > > From: Longpeng <longpeng2@huawei.com> > > > > > > > > > > Support doorbell mapping for vdpasim devices, then we can test the notify > > > > > passthrough feature even if there's no real hardware on hand. > > > > > > > > You can use vp_vdpa in L1 plus page_ver_vq in L0 to test it in L2. > > > > That is how I test it. > > > > > > > Yes, using nested virtualization can work, but it's hard to deploy in my > > > working environment for some reasons, so I decided to emulate this > > > capability in vdpasim, it's much easier. > > > > > > > > > > > > > Allocates a dummy page which used to emulate the notify page of the device. > > > > > All values written to this page would be ignored, a periodic work will > > > > > check whether there're requests that need to process. > > > > > > > > This seems tricky, it means the device is working even if there's no > > > > > > Right. It just try to make the vdpasim device work properly, but the vdpasim > > > device is only used for testing, so maybe the tricky emulation is > > > acceptable? > > > > Maybe. You can try enabling VIRTIO_F_NOTIFICATION_DATA and then > > looking at the data written to figure out whether > > you need to poll the vq. > > > We can try after the kernel supports the VIRTIO_F_NOTIFICATION_DATA feature, > while there is still a long way to go. That would be up to you to implement ;) It's probably 10-20 lines of code all in all. > > > > > > kick. If we really want to do, we should try to use page fault handler > > > > (probably by extending the config ops), but I'm not sure it's worth to > > > > bother (or if we can find a use case for no simulator devices). > > > > > > > This need to modify the framework, it seems unworthy. > > > > > > > > > > > > > This cap is disabled as default, users can enable it as follow: > > > > > modprobe vdpa_sim notify_passthrough=true > > > > > > > > > > Signed-off-by: Longpeng <longpeng2@huawei.com> > > > > > --- > > > > > drivers/vdpa/vdpa_sim/vdpa_sim.c | 71 ++++++++++++++++++++++++++-- > > > > > drivers/vdpa/vdpa_sim/vdpa_sim.h | 5 +- > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 5 +- > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 4 +- > > > > > 4 files changed, 76 insertions(+), 9 deletions(-) > > > > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > index 7438a89ce939..5c215b56b78b 100644 > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > @@ -14,6 +14,7 @@ > > > > > #include <linux/slab.h> > > > > > #include <linux/sched.h> > > > > > #include <linux/dma-map-ops.h> > > > > > +#include <asm/set_memory.h> > > > > > #include <linux/vringh.h> > > > > > #include <linux/vdpa.h> > > > > > #include <linux/vhost_iotlb.h> > > > > > @@ -36,9 +37,15 @@ module_param(max_iotlb_entries, int, 0444); > > > > > MODULE_PARM_DESC(max_iotlb_entries, > > > > > "Maximum number of iotlb entries for each address space. 0 means unlimited. (default: 2048)"); > > > > > > > > > > +static bool notify_passthrough; > > > > > +module_param(notify_passthrough, bool, 0444); > > > > > +MODULE_PARM_DESC(notify_passthrough, > > > > > + "Enable vq notify(doorbell) area mapping. (default: false)"); > > > > > + > > > > > #define VDPASIM_QUEUE_ALIGN PAGE_SIZE > > > > > #define VDPASIM_QUEUE_MAX 256 > > > > > #define VDPASIM_VENDOR_ID 0 > > > > > +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */ > > > > > > > > > > static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa) > > > > > { > > > > > @@ -276,7 +283,7 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > > > } > > > > > > > > > > vdpasim->dev_attr = *dev_attr; > > > > > - INIT_WORK(&vdpasim->work, dev_attr->work_fn); > > > > > + INIT_DELAYED_WORK(&vdpasim->vring_work, dev_attr->work_fn); > > > > > spin_lock_init(&vdpasim->lock); > > > > > spin_lock_init(&vdpasim->iommu_lock); > > > > > > > > > > @@ -287,6 +294,15 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > > > set_dma_ops(dev, &vdpasim_dma_ops); > > > > > vdpasim->vdpa.mdev = dev_attr->mgmt_dev; > > > > > > > > > > + if (notify_passthrough) { > > > > > + vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO); > > > > > + if (!vdpasim->notify) > > > > > + goto err_iommu; > > > > > +#ifdef CONFIG_X86 > > > > > + set_memory_uc(vdpasim->notify, 1); > > > > > +#endif > > > > > > > > What's the reason for using uc memory? > > > > > > > The vma->vm_page_prot of notify mapping is pgprot_noncached (see > > > vhost_vdpa_fault) but the vdpasim->notify is WB, so we should set its > > > memtype to UC here and set it back to WB when releasing the device. > > > > You never look at this memory though. Why does it matter whether > > it's UC or WB? > > > > The warning in trace_pfn_remap() would be triggered. > > For example: > > x86/PAT: CPU 16/KVM:17819 map pfn RAM range req uncached-minus for [mem > 0x5151f3000-0x5151f3fff], got write-back > > > > > > > + } > > > > > + > > > > > vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL); > > > > > if (!vdpasim->config) > > > > > goto err_iommu; > > > > > @@ -357,8 +373,11 @@ static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx) > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx]; > > > > > > > > > > + if (notify_passthrough) > > > > > + return; > > > > > > > > So we should keep the two paths to be used at the same time. Userspace > > > > can choose to not map doorbells? > > > > > > > It can work even if the userspace does not to map doorbells (e.g start > > > without page-per-vq=on), because the device will periodic check its vqs. > > > > > > > Thanks > > > > > > > > > + > > > > > if (vq->ready) > > > > > - schedule_work(&vdpasim->work); > > > > > + schedule_work(&vdpasim->vring_work.work); > > > > > } > > > > > > > > > > static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx, > > > > > @@ -495,6 +514,18 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa) > > > > > return status; > > > > > } > > > > > > > > > > +static void vdpasim_set_vring_work(struct vdpasim *vdpasim, bool start) > > > > > +{ > > > > > + if (!notify_passthrough) > > > > > + return; > > > > > + > > > > > + if (start) > > > > > + schedule_delayed_work(&vdpasim->vring_work, > > > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > > > + else > > > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > +} > > > > > + > > > > > static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > > > { > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > @@ -502,12 +533,16 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > > > spin_lock(&vdpasim->lock); > > > > > vdpasim->status = status; > > > > > spin_unlock(&vdpasim->lock); > > > > > + > > > > > + vdpasim_set_vring_work(vdpasim, status & VIRTIO_CONFIG_S_DRIVER_OK); > > > > > } > > > > > > > > > > static int vdpasim_reset(struct vdpa_device *vdpa, bool clear) > > > > > { > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > > > + vdpasim_set_vring_work(vdpasim, false); > > > > > + > > > > > spin_lock(&vdpasim->lock); > > > > > vdpasim->status = 0; > > > > > vdpasim_do_reset(vdpasim); > > > > > @@ -672,12 +707,24 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid, > > > > > return 0; > > > > > } > > > > > > > > > > +static struct vdpa_notification_area > > > > > +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid) > > > > > +{ > > > > > + struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > + struct vdpa_notification_area notify; > > > > > + > > > > > + notify.addr = virt_to_phys((void *)vdpasim->notify); > > > > > + notify.size = PAGE_SIZE; > > > > > + > > > > > + return notify; > > > > > +} > > > > > + > > > > > static void vdpasim_free(struct vdpa_device *vdpa) > > > > > { > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > int i; > > > > > > > > > > - cancel_work_sync(&vdpasim->work); > > > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > > > > > > for (i = 0; i < vdpasim->dev_attr.nvqs; i++) { > > > > > vringh_kiov_cleanup(&vdpasim->vqs[i].out_iov); > > > > > @@ -693,7 +740,23 @@ static void vdpasim_free(struct vdpa_device *vdpa) > > > > > vhost_iotlb_free(vdpasim->iommu); > > > > > kfree(vdpasim->vqs); > > > > > kfree(vdpasim->config); > > > > > + if (vdpasim->notify) { > > > > > +#ifdef CONFIG_X86 > > > > > + set_memory_wb(vdpasim->notify, 1); > > > > > +#endif > > > > > + free_page(vdpasim->notify); > > > > > + } > > > > > +} > > > > > + > > > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now) > > > > > +{ > > > > > + if (sched_now) > > > > > + schedule_work(&vdpasim->vring_work.work); > > > > > + else if (notify_passthrough) > > > > > + schedule_delayed_work(&vdpasim->vring_work, > > > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > > > } > > > > > +EXPORT_SYMBOL_GPL(vdpasim_schedule_work); > > > > > > > > > > static const struct vdpa_config_ops vdpasim_config_ops = { > > > > > .set_vq_address = vdpasim_set_vq_address, > > > > > @@ -704,6 +767,7 @@ static const struct vdpa_config_ops vdpasim_config_ops = { > > > > > .get_vq_ready = vdpasim_get_vq_ready, > > > > > .set_vq_state = vdpasim_set_vq_state, > > > > > .get_vq_state = vdpasim_get_vq_state, > > > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > > > .get_vq_align = vdpasim_get_vq_align, > > > > > .get_vq_group = vdpasim_get_vq_group, > > > > > .get_device_features = vdpasim_get_device_features, > > > > > @@ -737,6 +801,7 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = { > > > > > .get_vq_ready = vdpasim_get_vq_ready, > > > > > .set_vq_state = vdpasim_set_vq_state, > > > > > .get_vq_state = vdpasim_get_vq_state, > > > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > > > .get_vq_align = vdpasim_get_vq_align, > > > > > .get_vq_group = vdpasim_get_vq_group, > > > > > .get_device_features = vdpasim_get_device_features, > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > index 0e78737dcc16..da0866834918 100644 > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > @@ -53,7 +53,7 @@ struct vdpasim_dev_attr { > > > > > struct vdpasim { > > > > > struct vdpa_device vdpa; > > > > > struct vdpasim_virtqueue *vqs; > > > > > - struct work_struct work; > > > > > + struct delayed_work vring_work; > > > > > struct vdpasim_dev_attr dev_attr; > > > > > /* spinlock to synchronize virtqueue state */ > > > > > spinlock_t lock; > > > > > @@ -69,10 +69,13 @@ struct vdpasim { > > > > > bool running; > > > > > /* spinlock to synchronize iommu table */ > > > > > spinlock_t iommu_lock; > > > > > + /* dummy notify page */ > > > > > + unsigned long notify; > > > > > }; > > > > > > > > > > struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr, > > > > > const struct vdpa_dev_set_config *config); > > > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now); > > > > > > > > > > /* TODO: cross-endian support */ > > > > > static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim) > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > index c6db1a1baf76..8a640ea82284 100644 > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > @@ -288,7 +288,7 @@ static bool vdpasim_blk_handle_req(struct vdpasim *vdpasim, > > > > > > > > > > static void vdpasim_blk_work(struct work_struct *work) > > > > > { > > > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > > > bool reschedule = false; > > > > > int i; > > > > > > > > > > @@ -325,8 +325,7 @@ static void vdpasim_blk_work(struct work_struct *work) > > > > > out: > > > > > spin_unlock(&vdpasim->lock); > > > > > > > > > > - if (reschedule) > > > > > - schedule_work(&vdpasim->work); > > > > > + vdpasim_schedule_work(vdpasim, reschedule); > > > > > } > > > > > > > > > > static void vdpasim_blk_get_config(struct vdpasim *vdpasim, void *config) > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > index c3cb225ea469..8b998952384b 100644 > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > @@ -145,7 +145,7 @@ static void vdpasim_handle_cvq(struct vdpasim *vdpasim) > > > > > > > > > > static void vdpasim_net_work(struct work_struct *work) > > > > > { > > > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > > > struct vdpasim_virtqueue *txq = &vdpasim->vqs[1]; > > > > > struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0]; > > > > > ssize_t read, write; > > > > > @@ -196,7 +196,7 @@ static void vdpasim_net_work(struct work_struct *work) > > > > > vdpasim_net_complete(rxq, write); > > > > > > > > > > if (++pkts > 4) { > > > > > - schedule_work(&vdpasim->work); > > > > > + vdpasim_schedule_work(vdpasim, true); > > > > > goto out; > > > > > } > > > > > } > > > > > -- > > > > > 2.23.0 > > > > > > > > > > > > > . > > > > . _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <9e9545ab-312c-c9c1-c8ae-8bd6b9f8add6@huawei.com>]
* Re: [PATCH] vdpasim: support doorbell mapping [not found] ` <9e9545ab-312c-c9c1-c8ae-8bd6b9f8add6@huawei.com> @ 2022-11-28 14:17 ` Michael S. Tsirkin 2022-11-29 2:51 ` Jason Wang [not found] ` <97f93d38-c915-d534-44af-b164ca454765@huawei.com> 0 siblings, 2 replies; 6+ messages in thread From: Michael S. Tsirkin @ 2022-11-28 14:17 UTC (permalink / raw) To: Longpeng (Mike, Cloud Infrastructure Service Product Dept.) Cc: cohuck, linux-kernel, yechuan, eperezma, huangzhichao, stefanha, virtualization On Mon, Nov 28, 2022 at 09:20:21PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > 在 2022/11/28 20:20, Michael S. Tsirkin 写道: > > On Mon, Nov 28, 2022 at 07:59:33PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > > > > > > > 在 2022/11/28 18:19, Michael S. Tsirkin 写道: > > > > On Mon, Nov 28, 2022 at 04:19:30PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > > > > > > > > > > > > > 在 2022/11/28 12:05, Jason Wang 写道: > > > > > > On Mon, Nov 28, 2022 at 10:56 AM Longpeng(Mike) <longpeng2@huawei.com> wrote: > > > > > > > > > > > > > > From: Longpeng <longpeng2@huawei.com> > > > > > > > > > > > > > > Support doorbell mapping for vdpasim devices, then we can test the notify > > > > > > > passthrough feature even if there's no real hardware on hand. > > > > > > > > > > > > You can use vp_vdpa in L1 plus page_ver_vq in L0 to test it in L2. > > > > > > That is how I test it. > > > > > > > > > > > Yes, using nested virtualization can work, but it's hard to deploy in my > > > > > working environment for some reasons, so I decided to emulate this > > > > > capability in vdpasim, it's much easier. > > > > > > > > > > > > > > > > > > > Allocates a dummy page which used to emulate the notify page of the device. > > > > > > > All values written to this page would be ignored, a periodic work will > > > > > > > check whether there're requests that need to process. > > > > > > > > > > > > This seems tricky, it means the device is working even if there's no > > > > > > > > > > Right. It just try to make the vdpasim device work properly, but the vdpasim > > > > > device is only used for testing, so maybe the tricky emulation is > > > > > acceptable? > > > > > > > > Maybe. You can try enabling VIRTIO_F_NOTIFICATION_DATA and then > > > > looking at the data written to figure out whether > > > > you need to poll the vq. > > > > > > > We can try after the kernel supports the VIRTIO_F_NOTIFICATION_DATA feature, > > > while there is still a long way to go. > > > > That would be up to you to implement ;) It's probably 10-20 lines of > > code all in all. > > > > Um...The kick operation won't trigger VMEXIT if we support notify mapping > for the vdpasim device. > So, does the vdpasim device has to poll the notify > address and then decide which VQ to poll? > The pro of this approach is we can poll the notify address first instead of > the unconditional poll the VQ, right? Right. In fact you can do this without VIRTIO_F_NOTIFICATION_DATA too, just write 0xffff before checking the vq. > > > > > > > > > > > kick. If we really want to do, we should try to use page fault handler > > > > > > (probably by extending the config ops), but I'm not sure it's worth to > > > > > > bother (or if we can find a use case for no simulator devices). > > > > > > > > > > > This need to modify the framework, it seems unworthy. > > > > > > > > > > > > > > > > > > > This cap is disabled as default, users can enable it as follow: > > > > > > > modprobe vdpa_sim notify_passthrough=true > > > > > > > > > > > > > > Signed-off-by: Longpeng <longpeng2@huawei.com> > > > > > > > --- > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim.c | 71 ++++++++++++++++++++++++++-- > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim.h | 5 +- > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 5 +- > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 4 +- > > > > > > > 4 files changed, 76 insertions(+), 9 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > > > index 7438a89ce939..5c215b56b78b 100644 > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > > > @@ -14,6 +14,7 @@ > > > > > > > #include <linux/slab.h> > > > > > > > #include <linux/sched.h> > > > > > > > #include <linux/dma-map-ops.h> > > > > > > > +#include <asm/set_memory.h> > > > > > > > #include <linux/vringh.h> > > > > > > > #include <linux/vdpa.h> > > > > > > > #include <linux/vhost_iotlb.h> > > > > > > > @@ -36,9 +37,15 @@ module_param(max_iotlb_entries, int, 0444); > > > > > > > MODULE_PARM_DESC(max_iotlb_entries, > > > > > > > "Maximum number of iotlb entries for each address space. 0 means unlimited. (default: 2048)"); > > > > > > > > > > > > > > +static bool notify_passthrough; > > > > > > > +module_param(notify_passthrough, bool, 0444); > > > > > > > +MODULE_PARM_DESC(notify_passthrough, > > > > > > > + "Enable vq notify(doorbell) area mapping. (default: false)"); > > > > > > > + > > > > > > > #define VDPASIM_QUEUE_ALIGN PAGE_SIZE > > > > > > > #define VDPASIM_QUEUE_MAX 256 > > > > > > > #define VDPASIM_VENDOR_ID 0 > > > > > > > +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */ > > > > > > > > > > > > > > static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa) > > > > > > > { > > > > > > > @@ -276,7 +283,7 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > > > > > } > > > > > > > > > > > > > > vdpasim->dev_attr = *dev_attr; > > > > > > > - INIT_WORK(&vdpasim->work, dev_attr->work_fn); > > > > > > > + INIT_DELAYED_WORK(&vdpasim->vring_work, dev_attr->work_fn); > > > > > > > spin_lock_init(&vdpasim->lock); > > > > > > > spin_lock_init(&vdpasim->iommu_lock); > > > > > > > > > > > > > > @@ -287,6 +294,15 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > > > > > set_dma_ops(dev, &vdpasim_dma_ops); > > > > > > > vdpasim->vdpa.mdev = dev_attr->mgmt_dev; > > > > > > > > > > > > > > + if (notify_passthrough) { > > > > > > > + vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO); > > > > > > > + if (!vdpasim->notify) > > > > > > > + goto err_iommu; > > > > > > > +#ifdef CONFIG_X86 > > > > > > > + set_memory_uc(vdpasim->notify, 1); > > > > > > > +#endif > > > > > > > > > > > > What's the reason for using uc memory? > > > > > > > > > > > The vma->vm_page_prot of notify mapping is pgprot_noncached (see > > > > > vhost_vdpa_fault) but the vdpasim->notify is WB, so we should set its > > > > > memtype to UC here and set it back to WB when releasing the device. > > > > > > > > You never look at this memory though. Why does it matter whether > > > > it's UC or WB? > > > > > > > > > > The warning in trace_pfn_remap() would be triggered. > > > > > > For example: > > > > > > x86/PAT: CPU 16/KVM:17819 map pfn RAM range req uncached-minus for [mem > > > 0x5151f3000-0x5151f3fff], got write-back > > > > > > > > > > > > > + } > > > > > > > + > > > > > > > vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL); > > > > > > > if (!vdpasim->config) > > > > > > > goto err_iommu; > > > > > > > @@ -357,8 +373,11 @@ static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx) > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx]; > > > > > > > > > > > > > > + if (notify_passthrough) > > > > > > > + return; > > > > > > > > > > > > So we should keep the two paths to be used at the same time. Userspace > > > > > > can choose to not map doorbells? > > > > > > > > > > > It can work even if the userspace does not to map doorbells (e.g start > > > > > without page-per-vq=on), because the device will periodic check its vqs. > > > > > > > > > > > Thanks > > > > > > > > > > > > > + > > > > > > > if (vq->ready) > > > > > > > - schedule_work(&vdpasim->work); > > > > > > > + schedule_work(&vdpasim->vring_work.work); > > > > > > > } > > > > > > > > > > > > > > static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx, > > > > > > > @@ -495,6 +514,18 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa) > > > > > > > return status; > > > > > > > } > > > > > > > > > > > > > > +static void vdpasim_set_vring_work(struct vdpasim *vdpasim, bool start) > > > > > > > +{ > > > > > > > + if (!notify_passthrough) > > > > > > > + return; > > > > > > > + > > > > > > > + if (start) > > > > > > > + schedule_delayed_work(&vdpasim->vring_work, > > > > > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > > > > > + else > > > > > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > > > +} > > > > > > > + > > > > > > > static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > > > > > { > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > @@ -502,12 +533,16 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > > > > > spin_lock(&vdpasim->lock); > > > > > > > vdpasim->status = status; > > > > > > > spin_unlock(&vdpasim->lock); > > > > > > > + > > > > > > > + vdpasim_set_vring_work(vdpasim, status & VIRTIO_CONFIG_S_DRIVER_OK); > > > > > > > } > > > > > > > > > > > > > > static int vdpasim_reset(struct vdpa_device *vdpa, bool clear) > > > > > > > { > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > > > > > > > + vdpasim_set_vring_work(vdpasim, false); > > > > > > > + > > > > > > > spin_lock(&vdpasim->lock); > > > > > > > vdpasim->status = 0; > > > > > > > vdpasim_do_reset(vdpasim); > > > > > > > @@ -672,12 +707,24 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid, > > > > > > > return 0; > > > > > > > } > > > > > > > > > > > > > > +static struct vdpa_notification_area > > > > > > > +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid) > > > > > > > +{ > > > > > > > + struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > + struct vdpa_notification_area notify; > > > > > > > + > > > > > > > + notify.addr = virt_to_phys((void *)vdpasim->notify); > > > > > > > + notify.size = PAGE_SIZE; > > > > > > > + > > > > > > > + return notify; > > > > > > > +} > > > > > > > + > > > > > > > static void vdpasim_free(struct vdpa_device *vdpa) > > > > > > > { > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > int i; > > > > > > > > > > > > > > - cancel_work_sync(&vdpasim->work); > > > > > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > > > > > > > > > > for (i = 0; i < vdpasim->dev_attr.nvqs; i++) { > > > > > > > vringh_kiov_cleanup(&vdpasim->vqs[i].out_iov); > > > > > > > @@ -693,7 +740,23 @@ static void vdpasim_free(struct vdpa_device *vdpa) > > > > > > > vhost_iotlb_free(vdpasim->iommu); > > > > > > > kfree(vdpasim->vqs); > > > > > > > kfree(vdpasim->config); > > > > > > > + if (vdpasim->notify) { > > > > > > > +#ifdef CONFIG_X86 > > > > > > > + set_memory_wb(vdpasim->notify, 1); > > > > > > > +#endif > > > > > > > + free_page(vdpasim->notify); > > > > > > > + } > > > > > > > +} > > > > > > > + > > > > > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now) > > > > > > > +{ > > > > > > > + if (sched_now) > > > > > > > + schedule_work(&vdpasim->vring_work.work); > > > > > > > + else if (notify_passthrough) > > > > > > > + schedule_delayed_work(&vdpasim->vring_work, > > > > > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > > > > > } > > > > > > > +EXPORT_SYMBOL_GPL(vdpasim_schedule_work); > > > > > > > > > > > > > > static const struct vdpa_config_ops vdpasim_config_ops = { > > > > > > > .set_vq_address = vdpasim_set_vq_address, > > > > > > > @@ -704,6 +767,7 @@ static const struct vdpa_config_ops vdpasim_config_ops = { > > > > > > > .get_vq_ready = vdpasim_get_vq_ready, > > > > > > > .set_vq_state = vdpasim_set_vq_state, > > > > > > > .get_vq_state = vdpasim_get_vq_state, > > > > > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > > > > > .get_vq_align = vdpasim_get_vq_align, > > > > > > > .get_vq_group = vdpasim_get_vq_group, > > > > > > > .get_device_features = vdpasim_get_device_features, > > > > > > > @@ -737,6 +801,7 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = { > > > > > > > .get_vq_ready = vdpasim_get_vq_ready, > > > > > > > .set_vq_state = vdpasim_set_vq_state, > > > > > > > .get_vq_state = vdpasim_get_vq_state, > > > > > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > > > > > .get_vq_align = vdpasim_get_vq_align, > > > > > > > .get_vq_group = vdpasim_get_vq_group, > > > > > > > .get_device_features = vdpasim_get_device_features, > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > > > index 0e78737dcc16..da0866834918 100644 > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > > > @@ -53,7 +53,7 @@ struct vdpasim_dev_attr { > > > > > > > struct vdpasim { > > > > > > > struct vdpa_device vdpa; > > > > > > > struct vdpasim_virtqueue *vqs; > > > > > > > - struct work_struct work; > > > > > > > + struct delayed_work vring_work; > > > > > > > struct vdpasim_dev_attr dev_attr; > > > > > > > /* spinlock to synchronize virtqueue state */ > > > > > > > spinlock_t lock; > > > > > > > @@ -69,10 +69,13 @@ struct vdpasim { > > > > > > > bool running; > > > > > > > /* spinlock to synchronize iommu table */ > > > > > > > spinlock_t iommu_lock; > > > > > > > + /* dummy notify page */ > > > > > > > + unsigned long notify; > > > > > > > }; > > > > > > > > > > > > > > struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr, > > > > > > > const struct vdpa_dev_set_config *config); > > > > > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now); > > > > > > > > > > > > > > /* TODO: cross-endian support */ > > > > > > > static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim) > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > > > index c6db1a1baf76..8a640ea82284 100644 > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > > > @@ -288,7 +288,7 @@ static bool vdpasim_blk_handle_req(struct vdpasim *vdpasim, > > > > > > > > > > > > > > static void vdpasim_blk_work(struct work_struct *work) > > > > > > > { > > > > > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > > > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > > > > > bool reschedule = false; > > > > > > > int i; > > > > > > > > > > > > > > @@ -325,8 +325,7 @@ static void vdpasim_blk_work(struct work_struct *work) > > > > > > > out: > > > > > > > spin_unlock(&vdpasim->lock); > > > > > > > > > > > > > > - if (reschedule) > > > > > > > - schedule_work(&vdpasim->work); > > > > > > > + vdpasim_schedule_work(vdpasim, reschedule); > > > > > > > } > > > > > > > > > > > > > > static void vdpasim_blk_get_config(struct vdpasim *vdpasim, void *config) > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > > > index c3cb225ea469..8b998952384b 100644 > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > > > @@ -145,7 +145,7 @@ static void vdpasim_handle_cvq(struct vdpasim *vdpasim) > > > > > > > > > > > > > > static void vdpasim_net_work(struct work_struct *work) > > > > > > > { > > > > > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > > > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > > > > > struct vdpasim_virtqueue *txq = &vdpasim->vqs[1]; > > > > > > > struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0]; > > > > > > > ssize_t read, write; > > > > > > > @@ -196,7 +196,7 @@ static void vdpasim_net_work(struct work_struct *work) > > > > > > > vdpasim_net_complete(rxq, write); > > > > > > > > > > > > > > if (++pkts > 4) { > > > > > > > - schedule_work(&vdpasim->work); > > > > > > > + vdpasim_schedule_work(vdpasim, true); > > > > > > > goto out; > > > > > > > } > > > > > > > } > > > > > > > -- > > > > > > > 2.23.0 > > > > > > > > > > > > > > > > > > > . > > > > > > > > . > > > > . _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] vdpasim: support doorbell mapping 2022-11-28 14:17 ` Michael S. Tsirkin @ 2022-11-29 2:51 ` Jason Wang [not found] ` <97f93d38-c915-d534-44af-b164ca454765@huawei.com> 1 sibling, 0 replies; 6+ messages in thread From: Jason Wang @ 2022-11-29 2:51 UTC (permalink / raw) To: Michael S. Tsirkin Cc: cohuck, linux-kernel, yechuan, eperezma, huangzhichao, stefanha, Longpeng (Mike, Cloud Infrastructure Service Product Dept.), virtualization On Mon, Nov 28, 2022 at 10:17 PM Michael S. Tsirkin <mst@redhat.com> wrote: > > On Mon, Nov 28, 2022 at 09:20:21PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > > > > 在 2022/11/28 20:20, Michael S. Tsirkin 写道: > > > On Mon, Nov 28, 2022 at 07:59:33PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > > > > > > > > > > 在 2022/11/28 18:19, Michael S. Tsirkin 写道: > > > > > On Mon, Nov 28, 2022 at 04:19:30PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > > > > > > > > > > > > > > > > > > 在 2022/11/28 12:05, Jason Wang 写道: > > > > > > > On Mon, Nov 28, 2022 at 10:56 AM Longpeng(Mike) <longpeng2@huawei.com> wrote: > > > > > > > > > > > > > > > > From: Longpeng <longpeng2@huawei.com> > > > > > > > > > > > > > > > > Support doorbell mapping for vdpasim devices, then we can test the notify > > > > > > > > passthrough feature even if there's no real hardware on hand. > > > > > > > > > > > > > > You can use vp_vdpa in L1 plus page_ver_vq in L0 to test it in L2. > > > > > > > That is how I test it. > > > > > > > > > > > > > Yes, using nested virtualization can work, but it's hard to deploy in my > > > > > > working environment for some reasons, so I decided to emulate this > > > > > > capability in vdpasim, it's much easier. > > > > > > > > > > > > > > > > > > > > > > Allocates a dummy page which used to emulate the notify page of the device. > > > > > > > > All values written to this page would be ignored, a periodic work will > > > > > > > > check whether there're requests that need to process. > > > > > > > > > > > > > > This seems tricky, it means the device is working even if there's no > > > > > > > > > > > > Right. It just try to make the vdpasim device work properly, but the vdpasim > > > > > > device is only used for testing, so maybe the tricky emulation is > > > > > > acceptable? > > > > > > > > > > Maybe. You can try enabling VIRTIO_F_NOTIFICATION_DATA and then > > > > > looking at the data written to figure out whether > > > > > you need to poll the vq. > > > > > > > > > We can try after the kernel supports the VIRTIO_F_NOTIFICATION_DATA feature, > > > > while there is still a long way to go. > > > > > > That would be up to you to implement ;) It's probably 10-20 lines of > > > code all in all. > > > > > > > Um...The kick operation won't trigger VMEXIT if we support notify mapping > > for the vdpasim device. > > So, does the vdpasim device has to poll the notify > > address and then decide which VQ to poll? > > The pro of this approach is we can poll the notify address first instead of > > the unconditional poll the VQ, right? > > Right. In fact you can do this without VIRTIO_F_NOTIFICATION_DATA too, > just write 0xffff before checking the vq. +1 Thanks > > > > > > > > > > > > > > > kick. If we really want to do, we should try to use page fault handler > > > > > > > (probably by extending the config ops), but I'm not sure it's worth to > > > > > > > bother (or if we can find a use case for no simulator devices). > > > > > > > > > > > > > This need to modify the framework, it seems unworthy. > > > > > > > > > > > > > > > > > > > > > > This cap is disabled as default, users can enable it as follow: > > > > > > > > modprobe vdpa_sim notify_passthrough=true > > > > > > > > > > > > > > > > Signed-off-by: Longpeng <longpeng2@huawei.com> > > > > > > > > --- > > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim.c | 71 ++++++++++++++++++++++++++-- > > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim.h | 5 +- > > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 5 +- > > > > > > > > drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 4 +- > > > > > > > > 4 files changed, 76 insertions(+), 9 deletions(-) > > > > > > > > > > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > > > > index 7438a89ce939..5c215b56b78b 100644 > > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > > > > > > > > @@ -14,6 +14,7 @@ > > > > > > > > #include <linux/slab.h> > > > > > > > > #include <linux/sched.h> > > > > > > > > #include <linux/dma-map-ops.h> > > > > > > > > +#include <asm/set_memory.h> > > > > > > > > #include <linux/vringh.h> > > > > > > > > #include <linux/vdpa.h> > > > > > > > > #include <linux/vhost_iotlb.h> > > > > > > > > @@ -36,9 +37,15 @@ module_param(max_iotlb_entries, int, 0444); > > > > > > > > MODULE_PARM_DESC(max_iotlb_entries, > > > > > > > > "Maximum number of iotlb entries for each address space. 0 means unlimited. (default: 2048)"); > > > > > > > > > > > > > > > > +static bool notify_passthrough; > > > > > > > > +module_param(notify_passthrough, bool, 0444); > > > > > > > > +MODULE_PARM_DESC(notify_passthrough, > > > > > > > > + "Enable vq notify(doorbell) area mapping. (default: false)"); > > > > > > > > + > > > > > > > > #define VDPASIM_QUEUE_ALIGN PAGE_SIZE > > > > > > > > #define VDPASIM_QUEUE_MAX 256 > > > > > > > > #define VDPASIM_VENDOR_ID 0 > > > > > > > > +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */ > > > > > > > > > > > > > > > > static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa) > > > > > > > > { > > > > > > > > @@ -276,7 +283,7 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > > > > > > } > > > > > > > > > > > > > > > > vdpasim->dev_attr = *dev_attr; > > > > > > > > - INIT_WORK(&vdpasim->work, dev_attr->work_fn); > > > > > > > > + INIT_DELAYED_WORK(&vdpasim->vring_work, dev_attr->work_fn); > > > > > > > > spin_lock_init(&vdpasim->lock); > > > > > > > > spin_lock_init(&vdpasim->iommu_lock); > > > > > > > > > > > > > > > > @@ -287,6 +294,15 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > > > > > > > > set_dma_ops(dev, &vdpasim_dma_ops); > > > > > > > > vdpasim->vdpa.mdev = dev_attr->mgmt_dev; > > > > > > > > > > > > > > > > + if (notify_passthrough) { > > > > > > > > + vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO); > > > > > > > > + if (!vdpasim->notify) > > > > > > > > + goto err_iommu; > > > > > > > > +#ifdef CONFIG_X86 > > > > > > > > + set_memory_uc(vdpasim->notify, 1); > > > > > > > > +#endif > > > > > > > > > > > > > > What's the reason for using uc memory? > > > > > > > > > > > > > The vma->vm_page_prot of notify mapping is pgprot_noncached (see > > > > > > vhost_vdpa_fault) but the vdpasim->notify is WB, so we should set its > > > > > > memtype to UC here and set it back to WB when releasing the device. > > > > > > > > > > You never look at this memory though. Why does it matter whether > > > > > it's UC or WB? > > > > > > > > > > > > > The warning in trace_pfn_remap() would be triggered. > > > > > > > > For example: > > > > > > > > x86/PAT: CPU 16/KVM:17819 map pfn RAM range req uncached-minus for [mem > > > > 0x5151f3000-0x5151f3fff], got write-back > > > > > > > > > > > > > > > > + } > > > > > > > > + > > > > > > > > vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL); > > > > > > > > if (!vdpasim->config) > > > > > > > > goto err_iommu; > > > > > > > > @@ -357,8 +373,11 @@ static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx) > > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx]; > > > > > > > > > > > > > > > > + if (notify_passthrough) > > > > > > > > + return; > > > > > > > > > > > > > > So we should keep the two paths to be used at the same time. Userspace > > > > > > > can choose to not map doorbells? > > > > > > > > > > > > > It can work even if the userspace does not to map doorbells (e.g start > > > > > > without page-per-vq=on), because the device will periodic check its vqs. > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > + > > > > > > > > if (vq->ready) > > > > > > > > - schedule_work(&vdpasim->work); > > > > > > > > + schedule_work(&vdpasim->vring_work.work); > > > > > > > > } > > > > > > > > > > > > > > > > static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx, > > > > > > > > @@ -495,6 +514,18 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa) > > > > > > > > return status; > > > > > > > > } > > > > > > > > > > > > > > > > +static void vdpasim_set_vring_work(struct vdpasim *vdpasim, bool start) > > > > > > > > +{ > > > > > > > > + if (!notify_passthrough) > > > > > > > > + return; > > > > > > > > + > > > > > > > > + if (start) > > > > > > > > + schedule_delayed_work(&vdpasim->vring_work, > > > > > > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > > > > > > + else > > > > > > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > > > > +} > > > > > > > > + > > > > > > > > static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > > > > > > { > > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > @@ -502,12 +533,16 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > > > > > > > > spin_lock(&vdpasim->lock); > > > > > > > > vdpasim->status = status; > > > > > > > > spin_unlock(&vdpasim->lock); > > > > > > > > + > > > > > > > > + vdpasim_set_vring_work(vdpasim, status & VIRTIO_CONFIG_S_DRIVER_OK); > > > > > > > > } > > > > > > > > > > > > > > > > static int vdpasim_reset(struct vdpa_device *vdpa, bool clear) > > > > > > > > { > > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > > > > > > > > > + vdpasim_set_vring_work(vdpasim, false); > > > > > > > > + > > > > > > > > spin_lock(&vdpasim->lock); > > > > > > > > vdpasim->status = 0; > > > > > > > > vdpasim_do_reset(vdpasim); > > > > > > > > @@ -672,12 +707,24 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid, > > > > > > > > return 0; > > > > > > > > } > > > > > > > > > > > > > > > > +static struct vdpa_notification_area > > > > > > > > +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid) > > > > > > > > +{ > > > > > > > > + struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > + struct vdpa_notification_area notify; > > > > > > > > + > > > > > > > > + notify.addr = virt_to_phys((void *)vdpasim->notify); > > > > > > > > + notify.size = PAGE_SIZE; > > > > > > > > + > > > > > > > > + return notify; > > > > > > > > +} > > > > > > > > + > > > > > > > > static void vdpasim_free(struct vdpa_device *vdpa) > > > > > > > > { > > > > > > > > struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > > > > > > > > int i; > > > > > > > > > > > > > > > > - cancel_work_sync(&vdpasim->work); > > > > > > > > + cancel_delayed_work_sync(&vdpasim->vring_work); > > > > > > > > > > > > > > > > for (i = 0; i < vdpasim->dev_attr.nvqs; i++) { > > > > > > > > vringh_kiov_cleanup(&vdpasim->vqs[i].out_iov); > > > > > > > > @@ -693,7 +740,23 @@ static void vdpasim_free(struct vdpa_device *vdpa) > > > > > > > > vhost_iotlb_free(vdpasim->iommu); > > > > > > > > kfree(vdpasim->vqs); > > > > > > > > kfree(vdpasim->config); > > > > > > > > + if (vdpasim->notify) { > > > > > > > > +#ifdef CONFIG_X86 > > > > > > > > + set_memory_wb(vdpasim->notify, 1); > > > > > > > > +#endif > > > > > > > > + free_page(vdpasim->notify); > > > > > > > > + } > > > > > > > > +} > > > > > > > > + > > > > > > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now) > > > > > > > > +{ > > > > > > > > + if (sched_now) > > > > > > > > + schedule_work(&vdpasim->vring_work.work); > > > > > > > > + else if (notify_passthrough) > > > > > > > > + schedule_delayed_work(&vdpasim->vring_work, > > > > > > > > + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > > > > > > > > } > > > > > > > > +EXPORT_SYMBOL_GPL(vdpasim_schedule_work); > > > > > > > > > > > > > > > > static const struct vdpa_config_ops vdpasim_config_ops = { > > > > > > > > .set_vq_address = vdpasim_set_vq_address, > > > > > > > > @@ -704,6 +767,7 @@ static const struct vdpa_config_ops vdpasim_config_ops = { > > > > > > > > .get_vq_ready = vdpasim_get_vq_ready, > > > > > > > > .set_vq_state = vdpasim_set_vq_state, > > > > > > > > .get_vq_state = vdpasim_get_vq_state, > > > > > > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > > > > > > .get_vq_align = vdpasim_get_vq_align, > > > > > > > > .get_vq_group = vdpasim_get_vq_group, > > > > > > > > .get_device_features = vdpasim_get_device_features, > > > > > > > > @@ -737,6 +801,7 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = { > > > > > > > > .get_vq_ready = vdpasim_get_vq_ready, > > > > > > > > .set_vq_state = vdpasim_set_vq_state, > > > > > > > > .get_vq_state = vdpasim_get_vq_state, > > > > > > > > + .get_vq_notification = vdpasim_get_vq_notification, > > > > > > > > .get_vq_align = vdpasim_get_vq_align, > > > > > > > > .get_vq_group = vdpasim_get_vq_group, > > > > > > > > .get_device_features = vdpasim_get_device_features, > > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > > > > index 0e78737dcc16..da0866834918 100644 > > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h > > > > > > > > @@ -53,7 +53,7 @@ struct vdpasim_dev_attr { > > > > > > > > struct vdpasim { > > > > > > > > struct vdpa_device vdpa; > > > > > > > > struct vdpasim_virtqueue *vqs; > > > > > > > > - struct work_struct work; > > > > > > > > + struct delayed_work vring_work; > > > > > > > > struct vdpasim_dev_attr dev_attr; > > > > > > > > /* spinlock to synchronize virtqueue state */ > > > > > > > > spinlock_t lock; > > > > > > > > @@ -69,10 +69,13 @@ struct vdpasim { > > > > > > > > bool running; > > > > > > > > /* spinlock to synchronize iommu table */ > > > > > > > > spinlock_t iommu_lock; > > > > > > > > + /* dummy notify page */ > > > > > > > > + unsigned long notify; > > > > > > > > }; > > > > > > > > > > > > > > > > struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr, > > > > > > > > const struct vdpa_dev_set_config *config); > > > > > > > > +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now); > > > > > > > > > > > > > > > > /* TODO: cross-endian support */ > > > > > > > > static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim) > > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > > > > index c6db1a1baf76..8a640ea82284 100644 > > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > > > > > > > > @@ -288,7 +288,7 @@ static bool vdpasim_blk_handle_req(struct vdpasim *vdpasim, > > > > > > > > > > > > > > > > static void vdpasim_blk_work(struct work_struct *work) > > > > > > > > { > > > > > > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > > > > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > > > > > > bool reschedule = false; > > > > > > > > int i; > > > > > > > > > > > > > > > > @@ -325,8 +325,7 @@ static void vdpasim_blk_work(struct work_struct *work) > > > > > > > > out: > > > > > > > > spin_unlock(&vdpasim->lock); > > > > > > > > > > > > > > > > - if (reschedule) > > > > > > > > - schedule_work(&vdpasim->work); > > > > > > > > + vdpasim_schedule_work(vdpasim, reschedule); > > > > > > > > } > > > > > > > > > > > > > > > > static void vdpasim_blk_get_config(struct vdpasim *vdpasim, void *config) > > > > > > > > diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > > > > index c3cb225ea469..8b998952384b 100644 > > > > > > > > --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > > > > +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > > > > > > > > @@ -145,7 +145,7 @@ static void vdpasim_handle_cvq(struct vdpasim *vdpasim) > > > > > > > > > > > > > > > > static void vdpasim_net_work(struct work_struct *work) > > > > > > > > { > > > > > > > > - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > > > > > > > > + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > > > > > > > > struct vdpasim_virtqueue *txq = &vdpasim->vqs[1]; > > > > > > > > struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0]; > > > > > > > > ssize_t read, write; > > > > > > > > @@ -196,7 +196,7 @@ static void vdpasim_net_work(struct work_struct *work) > > > > > > > > vdpasim_net_complete(rxq, write); > > > > > > > > > > > > > > > > if (++pkts > 4) { > > > > > > > > - schedule_work(&vdpasim->work); > > > > > > > > + vdpasim_schedule_work(vdpasim, true); > > > > > > > > goto out; > > > > > > > > } > > > > > > > > } > > > > > > > > -- > > > > > > > > 2.23.0 > > > > > > > > > > > > > > > > > > > > > > . > > > > > > > > > > . > > > > > > . > _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <97f93d38-c915-d534-44af-b164ca454765@huawei.com>]
* Re: [PATCH] vdpasim: support doorbell mapping [not found] ` <97f93d38-c915-d534-44af-b164ca454765@huawei.com> @ 2022-11-29 2:52 ` Jason Wang 0 siblings, 0 replies; 6+ messages in thread From: Jason Wang @ 2022-11-29 2:52 UTC (permalink / raw) To: Longpeng (Mike, Cloud Infrastructure Service Product Dept.) Cc: Michael S. Tsirkin, cohuck, linux-kernel, yechuan, eperezma, huangzhichao, stefanha, virtualization On Mon, Nov 28, 2022 at 10:36 PM Longpeng (Mike, Cloud Infrastructure Service Product Dept.) <longpeng2@huawei.com> wrote: > > > > 在 2022/11/28 22:17, Michael S. Tsirkin 写道: > > On Mon, Nov 28, 2022 at 09:20:21PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > >> > >> > >> 在 2022/11/28 20:20, Michael S. Tsirkin 写道: > >>> On Mon, Nov 28, 2022 at 07:59:33PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > >>>> > >>>> > >>>> 在 2022/11/28 18:19, Michael S. Tsirkin 写道: > >>>>> On Mon, Nov 28, 2022 at 04:19:30PM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote: > >>>>>> > >>>>>> > >>>>>> 在 2022/11/28 12:05, Jason Wang 写道: > >>>>>>> On Mon, Nov 28, 2022 at 10:56 AM Longpeng(Mike) <longpeng2@huawei.com> wrote: > >>>>>>>> > >>>>>>>> From: Longpeng <longpeng2@huawei.com> > >>>>>>>> > >>>>>>>> Support doorbell mapping for vdpasim devices, then we can test the notify > >>>>>>>> passthrough feature even if there's no real hardware on hand. > >>>>>>> > >>>>>>> You can use vp_vdpa in L1 plus page_ver_vq in L0 to test it in L2. > >>>>>>> That is how I test it. > >>>>>>> > >>>>>> Yes, using nested virtualization can work, but it's hard to deploy in my > >>>>>> working environment for some reasons, so I decided to emulate this > >>>>>> capability in vdpasim, it's much easier. > >>>>>> > >>>>>>>> > >>>>>>>> Allocates a dummy page which used to emulate the notify page of the device. > >>>>>>>> All values written to this page would be ignored, a periodic work will > >>>>>>>> check whether there're requests that need to process. > >>>>>>> > >>>>>>> This seems tricky, it means the device is working even if there's no > >>>>>> > >>>>>> Right. It just try to make the vdpasim device work properly, but the vdpasim > >>>>>> device is only used for testing, so maybe the tricky emulation is > >>>>>> acceptable? > >>>>> > >>>>> Maybe. You can try enabling VIRTIO_F_NOTIFICATION_DATA and then > >>>>> looking at the data written to figure out whether > >>>>> you need to poll the vq. > >>>>> > >>>> We can try after the kernel supports the VIRTIO_F_NOTIFICATION_DATA feature, > >>>> while there is still a long way to go. > >>> > >>> That would be up to you to implement ;) It's probably 10-20 lines of > >>> code all in all. > >>> > >> > >> Um...The kick operation won't trigger VMEXIT if we support notify mapping > >> for the vdpasim device. > >> So, does the vdpasim device has to poll the notify > >> address and then decide which VQ to poll? > >> The pro of this approach is we can poll the notify address first instead of > >> the unconditional poll the VQ, right? > > > > Right. In fact you can do this without VIRTIO_F_NOTIFICATION_DATA too, > > just write 0xffff before checking the vq. > > > Yes, this can work. I will try it in the next version if there're no > other objections. Yes, please. Thanks > > >> > >>>>> > >>>>>>> kick. If we really want to do, we should try to use page fault handler > >>>>>>> (probably by extending the config ops), but I'm not sure it's worth to > >>>>>>> bother (or if we can find a use case for no simulator devices). > >>>>>>> > >>>>>> This need to modify the framework, it seems unworthy. > >>>>>> > >>>>>>>> > >>>>>>>> This cap is disabled as default, users can enable it as follow: > >>>>>>>> modprobe vdpa_sim notify_passthrough=true > >>>>>>>> > >>>>>>>> Signed-off-by: Longpeng <longpeng2@huawei.com> > >>>>>>>> --- > >>>>>>>> drivers/vdpa/vdpa_sim/vdpa_sim.c | 71 ++++++++++++++++++++++++++-- > >>>>>>>> drivers/vdpa/vdpa_sim/vdpa_sim.h | 5 +- > >>>>>>>> drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 5 +- > >>>>>>>> drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 4 +- > >>>>>>>> 4 files changed, 76 insertions(+), 9 deletions(-) > >>>>>>>> > >>>>>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c > >>>>>>>> index 7438a89ce939..5c215b56b78b 100644 > >>>>>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c > >>>>>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c > >>>>>>>> @@ -14,6 +14,7 @@ > >>>>>>>> #include <linux/slab.h> > >>>>>>>> #include <linux/sched.h> > >>>>>>>> #include <linux/dma-map-ops.h> > >>>>>>>> +#include <asm/set_memory.h> > >>>>>>>> #include <linux/vringh.h> > >>>>>>>> #include <linux/vdpa.h> > >>>>>>>> #include <linux/vhost_iotlb.h> > >>>>>>>> @@ -36,9 +37,15 @@ module_param(max_iotlb_entries, int, 0444); > >>>>>>>> MODULE_PARM_DESC(max_iotlb_entries, > >>>>>>>> "Maximum number of iotlb entries for each address space. 0 means unlimited. (default: 2048)"); > >>>>>>>> > >>>>>>>> +static bool notify_passthrough; > >>>>>>>> +module_param(notify_passthrough, bool, 0444); > >>>>>>>> +MODULE_PARM_DESC(notify_passthrough, > >>>>>>>> + "Enable vq notify(doorbell) area mapping. (default: false)"); > >>>>>>>> + > >>>>>>>> #define VDPASIM_QUEUE_ALIGN PAGE_SIZE > >>>>>>>> #define VDPASIM_QUEUE_MAX 256 > >>>>>>>> #define VDPASIM_VENDOR_ID 0 > >>>>>>>> +#define VDPASIM_VRING_POLL_PERIOD 100 /* ms */ > >>>>>>>> > >>>>>>>> static struct vdpasim *vdpa_to_sim(struct vdpa_device *vdpa) > >>>>>>>> { > >>>>>>>> @@ -276,7 +283,7 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > >>>>>>>> } > >>>>>>>> > >>>>>>>> vdpasim->dev_attr = *dev_attr; > >>>>>>>> - INIT_WORK(&vdpasim->work, dev_attr->work_fn); > >>>>>>>> + INIT_DELAYED_WORK(&vdpasim->vring_work, dev_attr->work_fn); > >>>>>>>> spin_lock_init(&vdpasim->lock); > >>>>>>>> spin_lock_init(&vdpasim->iommu_lock); > >>>>>>>> > >>>>>>>> @@ -287,6 +294,15 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *dev_attr, > >>>>>>>> set_dma_ops(dev, &vdpasim_dma_ops); > >>>>>>>> vdpasim->vdpa.mdev = dev_attr->mgmt_dev; > >>>>>>>> > >>>>>>>> + if (notify_passthrough) { > >>>>>>>> + vdpasim->notify = __get_free_page(GFP_KERNEL | __GFP_ZERO); > >>>>>>>> + if (!vdpasim->notify) > >>>>>>>> + goto err_iommu; > >>>>>>>> +#ifdef CONFIG_X86 > >>>>>>>> + set_memory_uc(vdpasim->notify, 1); > >>>>>>>> +#endif > >>>>>>> > >>>>>>> What's the reason for using uc memory? > >>>>>>> > >>>>>> The vma->vm_page_prot of notify mapping is pgprot_noncached (see > >>>>>> vhost_vdpa_fault) but the vdpasim->notify is WB, so we should set its > >>>>>> memtype to UC here and set it back to WB when releasing the device. > >>>>> > >>>>> You never look at this memory though. Why does it matter whether > >>>>> it's UC or WB? > >>>>> > >>>> > >>>> The warning in trace_pfn_remap() would be triggered. > >>>> > >>>> For example: > >>>> > >>>> x86/PAT: CPU 16/KVM:17819 map pfn RAM range req uncached-minus for [mem > >>>> 0x5151f3000-0x5151f3fff], got write-back > >>>> > >>>> > >>>>>>>> + } > >>>>>>>> + > >>>>>>>> vdpasim->config = kzalloc(dev_attr->config_size, GFP_KERNEL); > >>>>>>>> if (!vdpasim->config) > >>>>>>>> goto err_iommu; > >>>>>>>> @@ -357,8 +373,11 @@ static void vdpasim_kick_vq(struct vdpa_device *vdpa, u16 idx) > >>>>>>>> struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > >>>>>>>> struct vdpasim_virtqueue *vq = &vdpasim->vqs[idx]; > >>>>>>>> > >>>>>>>> + if (notify_passthrough) > >>>>>>>> + return; > >>>>>>> > >>>>>>> So we should keep the two paths to be used at the same time. Userspace > >>>>>>> can choose to not map doorbells? > >>>>>>> > >>>>>> It can work even if the userspace does not to map doorbells (e.g start > >>>>>> without page-per-vq=on), because the device will periodic check its vqs. > >>>>>> > >>>>>>> Thanks > >>>>>>> > >>>>>>>> + > >>>>>>>> if (vq->ready) > >>>>>>>> - schedule_work(&vdpasim->work); > >>>>>>>> + schedule_work(&vdpasim->vring_work.work); > >>>>>>>> } > >>>>>>>> > >>>>>>>> static void vdpasim_set_vq_cb(struct vdpa_device *vdpa, u16 idx, > >>>>>>>> @@ -495,6 +514,18 @@ static u8 vdpasim_get_status(struct vdpa_device *vdpa) > >>>>>>>> return status; > >>>>>>>> } > >>>>>>>> > >>>>>>>> +static void vdpasim_set_vring_work(struct vdpasim *vdpasim, bool start) > >>>>>>>> +{ > >>>>>>>> + if (!notify_passthrough) > >>>>>>>> + return; > >>>>>>>> + > >>>>>>>> + if (start) > >>>>>>>> + schedule_delayed_work(&vdpasim->vring_work, > >>>>>>>> + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > >>>>>>>> + else > >>>>>>>> + cancel_delayed_work_sync(&vdpasim->vring_work); > >>>>>>>> +} > >>>>>>>> + > >>>>>>>> static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > >>>>>>>> { > >>>>>>>> struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > >>>>>>>> @@ -502,12 +533,16 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) > >>>>>>>> spin_lock(&vdpasim->lock); > >>>>>>>> vdpasim->status = status; > >>>>>>>> spin_unlock(&vdpasim->lock); > >>>>>>>> + > >>>>>>>> + vdpasim_set_vring_work(vdpasim, status & VIRTIO_CONFIG_S_DRIVER_OK); > >>>>>>>> } > >>>>>>>> > >>>>>>>> static int vdpasim_reset(struct vdpa_device *vdpa, bool clear) > >>>>>>>> { > >>>>>>>> struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > >>>>>>>> > >>>>>>>> + vdpasim_set_vring_work(vdpasim, false); > >>>>>>>> + > >>>>>>>> spin_lock(&vdpasim->lock); > >>>>>>>> vdpasim->status = 0; > >>>>>>>> vdpasim_do_reset(vdpasim); > >>>>>>>> @@ -672,12 +707,24 @@ static int vdpasim_dma_unmap(struct vdpa_device *vdpa, unsigned int asid, > >>>>>>>> return 0; > >>>>>>>> } > >>>>>>>> > >>>>>>>> +static struct vdpa_notification_area > >>>>>>>> +vdpasim_get_vq_notification(struct vdpa_device *vdpa, u16 qid) > >>>>>>>> +{ > >>>>>>>> + struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > >>>>>>>> + struct vdpa_notification_area notify; > >>>>>>>> + > >>>>>>>> + notify.addr = virt_to_phys((void *)vdpasim->notify); > >>>>>>>> + notify.size = PAGE_SIZE; > >>>>>>>> + > >>>>>>>> + return notify; > >>>>>>>> +} > >>>>>>>> + > >>>>>>>> static void vdpasim_free(struct vdpa_device *vdpa) > >>>>>>>> { > >>>>>>>> struct vdpasim *vdpasim = vdpa_to_sim(vdpa); > >>>>>>>> int i; > >>>>>>>> > >>>>>>>> - cancel_work_sync(&vdpasim->work); > >>>>>>>> + cancel_delayed_work_sync(&vdpasim->vring_work); > >>>>>>>> > >>>>>>>> for (i = 0; i < vdpasim->dev_attr.nvqs; i++) { > >>>>>>>> vringh_kiov_cleanup(&vdpasim->vqs[i].out_iov); > >>>>>>>> @@ -693,7 +740,23 @@ static void vdpasim_free(struct vdpa_device *vdpa) > >>>>>>>> vhost_iotlb_free(vdpasim->iommu); > >>>>>>>> kfree(vdpasim->vqs); > >>>>>>>> kfree(vdpasim->config); > >>>>>>>> + if (vdpasim->notify) { > >>>>>>>> +#ifdef CONFIG_X86 > >>>>>>>> + set_memory_wb(vdpasim->notify, 1); > >>>>>>>> +#endif > >>>>>>>> + free_page(vdpasim->notify); > >>>>>>>> + } > >>>>>>>> +} > >>>>>>>> + > >>>>>>>> +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now) > >>>>>>>> +{ > >>>>>>>> + if (sched_now) > >>>>>>>> + schedule_work(&vdpasim->vring_work.work); > >>>>>>>> + else if (notify_passthrough) > >>>>>>>> + schedule_delayed_work(&vdpasim->vring_work, > >>>>>>>> + msecs_to_jiffies(VDPASIM_VRING_POLL_PERIOD)); > >>>>>>>> } > >>>>>>>> +EXPORT_SYMBOL_GPL(vdpasim_schedule_work); > >>>>>>>> > >>>>>>>> static const struct vdpa_config_ops vdpasim_config_ops = { > >>>>>>>> .set_vq_address = vdpasim_set_vq_address, > >>>>>>>> @@ -704,6 +767,7 @@ static const struct vdpa_config_ops vdpasim_config_ops = { > >>>>>>>> .get_vq_ready = vdpasim_get_vq_ready, > >>>>>>>> .set_vq_state = vdpasim_set_vq_state, > >>>>>>>> .get_vq_state = vdpasim_get_vq_state, > >>>>>>>> + .get_vq_notification = vdpasim_get_vq_notification, > >>>>>>>> .get_vq_align = vdpasim_get_vq_align, > >>>>>>>> .get_vq_group = vdpasim_get_vq_group, > >>>>>>>> .get_device_features = vdpasim_get_device_features, > >>>>>>>> @@ -737,6 +801,7 @@ static const struct vdpa_config_ops vdpasim_batch_config_ops = { > >>>>>>>> .get_vq_ready = vdpasim_get_vq_ready, > >>>>>>>> .set_vq_state = vdpasim_set_vq_state, > >>>>>>>> .get_vq_state = vdpasim_get_vq_state, > >>>>>>>> + .get_vq_notification = vdpasim_get_vq_notification, > >>>>>>>> .get_vq_align = vdpasim_get_vq_align, > >>>>>>>> .get_vq_group = vdpasim_get_vq_group, > >>>>>>>> .get_device_features = vdpasim_get_device_features, > >>>>>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h > >>>>>>>> index 0e78737dcc16..da0866834918 100644 > >>>>>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim.h > >>>>>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h > >>>>>>>> @@ -53,7 +53,7 @@ struct vdpasim_dev_attr { > >>>>>>>> struct vdpasim { > >>>>>>>> struct vdpa_device vdpa; > >>>>>>>> struct vdpasim_virtqueue *vqs; > >>>>>>>> - struct work_struct work; > >>>>>>>> + struct delayed_work vring_work; > >>>>>>>> struct vdpasim_dev_attr dev_attr; > >>>>>>>> /* spinlock to synchronize virtqueue state */ > >>>>>>>> spinlock_t lock; > >>>>>>>> @@ -69,10 +69,13 @@ struct vdpasim { > >>>>>>>> bool running; > >>>>>>>> /* spinlock to synchronize iommu table */ > >>>>>>>> spinlock_t iommu_lock; > >>>>>>>> + /* dummy notify page */ > >>>>>>>> + unsigned long notify; > >>>>>>>> }; > >>>>>>>> > >>>>>>>> struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr, > >>>>>>>> const struct vdpa_dev_set_config *config); > >>>>>>>> +void vdpasim_schedule_work(struct vdpasim *vdpasim, bool sched_now); > >>>>>>>> > >>>>>>>> /* TODO: cross-endian support */ > >>>>>>>> static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim) > >>>>>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > >>>>>>>> index c6db1a1baf76..8a640ea82284 100644 > >>>>>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > >>>>>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c > >>>>>>>> @@ -288,7 +288,7 @@ static bool vdpasim_blk_handle_req(struct vdpasim *vdpasim, > >>>>>>>> > >>>>>>>> static void vdpasim_blk_work(struct work_struct *work) > >>>>>>>> { > >>>>>>>> - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > >>>>>>>> + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > >>>>>>>> bool reschedule = false; > >>>>>>>> int i; > >>>>>>>> > >>>>>>>> @@ -325,8 +325,7 @@ static void vdpasim_blk_work(struct work_struct *work) > >>>>>>>> out: > >>>>>>>> spin_unlock(&vdpasim->lock); > >>>>>>>> > >>>>>>>> - if (reschedule) > >>>>>>>> - schedule_work(&vdpasim->work); > >>>>>>>> + vdpasim_schedule_work(vdpasim, reschedule); > >>>>>>>> } > >>>>>>>> > >>>>>>>> static void vdpasim_blk_get_config(struct vdpasim *vdpasim, void *config) > >>>>>>>> diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > >>>>>>>> index c3cb225ea469..8b998952384b 100644 > >>>>>>>> --- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > >>>>>>>> +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c > >>>>>>>> @@ -145,7 +145,7 @@ static void vdpasim_handle_cvq(struct vdpasim *vdpasim) > >>>>>>>> > >>>>>>>> static void vdpasim_net_work(struct work_struct *work) > >>>>>>>> { > >>>>>>>> - struct vdpasim *vdpasim = container_of(work, struct vdpasim, work); > >>>>>>>> + struct vdpasim *vdpasim = container_of(work, struct vdpasim, vring_work.work); > >>>>>>>> struct vdpasim_virtqueue *txq = &vdpasim->vqs[1]; > >>>>>>>> struct vdpasim_virtqueue *rxq = &vdpasim->vqs[0]; > >>>>>>>> ssize_t read, write; > >>>>>>>> @@ -196,7 +196,7 @@ static void vdpasim_net_work(struct work_struct *work) > >>>>>>>> vdpasim_net_complete(rxq, write); > >>>>>>>> > >>>>>>>> if (++pkts > 4) { > >>>>>>>> - schedule_work(&vdpasim->work); > >>>>>>>> + vdpasim_schedule_work(vdpasim, true); > >>>>>>>> goto out; > >>>>>>>> } > >>>>>>>> } > >>>>>>>> -- > >>>>>>>> 2.23.0 > >>>>>>>> > >>>>>>> > >>>>>>> . > >>>>> > >>>>> . > >>> > >>> . > > > > . > _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-11-29 2:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20221128025558.2152-1-longpeng2@huawei.com>
2022-11-28 4:05 ` [PATCH] vdpasim: support doorbell mapping Jason Wang
[not found] ` <53edc14a-74bb-f9c7-06bd-7ea1047fe613@huawei.com>
2022-11-28 10:19 ` Michael S. Tsirkin
[not found] ` <28c1ae52-38ff-42ce-4331-11f7aa040296@huawei.com>
2022-11-28 12:20 ` Michael S. Tsirkin
[not found] ` <9e9545ab-312c-c9c1-c8ae-8bd6b9f8add6@huawei.com>
2022-11-28 14:17 ` Michael S. Tsirkin
2022-11-29 2:51 ` Jason Wang
[not found] ` <97f93d38-c915-d534-44af-b164ca454765@huawei.com>
2022-11-29 2:52 ` Jason Wang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).