Re: [PATCH v2 1/1] virtio_net: notify MAC address change on device initialization

["Michael S. Tsirkin" <mst@redhat.com>]

On Fri, Jan 27, 2023 at 01:28:01PM +0100, Laurent Vivier wrote:
> On 1/27/23 12:08, Michael S. Tsirkin wrote:
> > On Tue, Jan 24, 2023 at 12:04:24PM +0100, Laurent Vivier wrote:
> > > On 1/24/23 11:15, Michael S. Tsirkin wrote:
> > > > On Mon, Jan 23, 2023 at 01:00:22PM +0100, Laurent Vivier wrote:
> > > > > In virtnet_probe(), if the device doesn't provide a MAC address the
> > > > > driver assigns a random one.
> > > > > As we modify the MAC address we need to notify the device to allow it
> > > > > to update all the related information.
> > > > > 
> > > > > The problem can be seen with vDPA and mlx5_vdpa driver as it doesn't
> > > > > assign a MAC address by default. The virtio_net device uses a random
> > > > > MAC address (we can see it with "ip link"), but we can't ping a net
> > > > > namespace from another one using the virtio-vdpa device because the
> > > > > new MAC address has not been provided to the hardware.
> > > > 
> > > > And then what exactly happens? Does hardware drop the outgoing
> > > > or the incoming packets? Pls include in the commit log.
> > > 
> > > I don't know. There is nothing in the kernel logs.
> > > 
> > > The ping error is: "Destination Host Unreachable"
> > > 
> > > I found the problem with the mlx5 driver as in "it doesn't work when MAC
> > > address is not set"...
> > > 
> > > Perhaps Eli can explain what happens when the MAC address is not set?
> > > 
> > > > 
> > > > > Signed-off-by: Laurent Vivier <lvivier@redhat.com>
> > > > > ---
> > > > >    drivers/net/virtio_net.c | 14 ++++++++++++++
> > > > >    1 file changed, 14 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > > > > index 7723b2a49d8e..4bdc8286678b 100644
> > > > > --- a/drivers/net/virtio_net.c
> > > > > +++ b/drivers/net/virtio_net.c
> > > > > @@ -3800,6 +3800,8 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > > >    		eth_hw_addr_set(dev, addr);
> > > > >    	} else {
> > > > >    		eth_hw_addr_random(dev);
> > > > > +		dev_info(&vdev->dev, "Assigned random MAC address %pM\n",
> > > > > +			 dev->dev_addr);
> > > > >    	}
> > > > >    	/* Set up our device-specific information */
> > > > > @@ -3956,6 +3958,18 @@ static int virtnet_probe(struct virtio_device *vdev)
> > > > >    	pr_debug("virtnet: registered device %s with %d RX and TX vq's\n",
> > > > >    		 dev->name, max_queue_pairs);
> > > > > +	/* a random MAC address has been assigned, notify the device */
> > > > > +	if (!virtio_has_feature(vdev, VIRTIO_NET_F_MAC) &&
> > > > > +	    virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
> > > > 
> > > > Maybe add a comment explaining that we don't fail probe if
> > > > VIRTIO_NET_F_CTRL_MAC_ADDR is not there because
> > > > many devices work fine without getting MAC explicitly.
> > > 
> > > OK
> > > 
> > > > 
> > > > > +		struct scatterlist sg;
> > > > > +
> > > > > +		sg_init_one(&sg, dev->dev_addr, dev->addr_len);
> > > > > +		if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
> > > > > +					  VIRTIO_NET_CTRL_MAC_ADDR_SET, &sg)) {
> > > > > +			dev_warn(&vdev->dev, "Failed to update MAC address.\n");
> > > > 
> > > > Here, I'm not sure we want to proceed. Is it useful sometimes?
> > > 
> > > I think reporting an error is always useful, but I can remove that if you prefer.
> > 
> > No the question was whether we should fail probe not
> > whether we print the warning.
> 
> Good question.
> 
> After all, as VIRTIO_NET_F_CTRL_MAC_ADDR is set, if
> VIRTIO_NET_CTRL_MAC_ADDR_SET fails it means there is a real problem, so yes,
> we should fail.
> 
> > 
> > 
> > > > I note that we deny with virtnet_set_mac_address.
> > > > 
> > > > > +		}
> > > > > +	}
> > > > > +
> > > > >    	return 0;
> > > > 
> > > > 
> > > > 
> > > > Also, some code duplication with virtnet_set_mac_address here.
> > > > 
> > > > Also:
> > > > 	When using the legacy interface, \field{mac} is driver-writable
> > > > 	which provided a way for drivers to update the MAC without
> > > > 	negotiating VIRTIO_NET_F_CTRL_MAC_ADDR.
> > > > 
> > > > How about factoring out code in virtnet_set_mac_address
> > > > and reusing that?
> > > > 
> > > 
> > > In fact, we can write in the field only if we have VIRTIO_NET_F_MAC
> > > (according to virtnet_set_mac_address(), and this code is executed only if
> > > we do not have VIRTIO_NET_F_MAC. So I think it's better not factoring the
> > > code as we have only the control queue case to manage.
> > > 
> > > > This will also handle corner cases such as VIRTIO_NET_F_STANDBY
> > > > which are not currently addressed.
> > > 
> > > F_STANDBY is only enabled when virtio-net device MAC address is equal to the
> > > VFIO device MAC address, I don't think it can be enabled when the MAC
> > > address is randomly assigned (in this case it has already failed in
> > > net_failover_create(), as it has been called using the random mac address),
> > > it's why I didn't check for it.
> > 
> > But the spec did not say there's a dependency :(.
> > My point is what should we do if there's F_STANDBY but no MAC?
> > Maybe add a separate patch clearing F_STANDBY in this case?
> 
> The simplest would be to add at the beginning of the probe function:
> 
> if (!virtio_has_feature(vdev, VIRTIO_NET_F_MAC) &&
>     virtio_has_feature(vdev, VIRTIO_NET_F_STANDBY)) {
> 	pr_err("virtio-net: a standby device cannot be used without a MAC address");
> 	return -EOPNOTSUPP;
> }
> 
> And I think it would help a lot to debug misconfiguration of the interface.
> 
> Thanks,
> Laurent

I would rather add these checks in virtnet_validate.
And I think it's cleaner to just do __virtio_clear_bit on
VIRTIO_NET_F_STANDBY rather than failing simply because
we previously did not prohibit it so there could be
devices like these out there.

A spec patch saying VIRTIO_NET_F_STANDBY should also have
VIRTIO_NET_F_MAC is also welcome.

> > 
> > > > 
> > > > 
> > > > >    free_unregister_netdev:
> > > > > -- 
> > > > > 2.39.0
> > > > 
> > > 
> > > Thanks,
> > > Laurent
> > 

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization