virtualization.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: kraxel@redhat.com, airlied@redhat.com, daniel@ffwll.ch,
	sam@ravnborg.org, javierm@redhat.com,
	dri-devel@lists.freedesktop.org
Cc: Thomas Zimmermann <tzimmermann@suse.de>,
	virtualization@lists.linux-foundation.org
Subject: [PATCH 04/17] drm/cirrus: Move drm_dev_{enter, exit}() into DRM helpers
Date: Wed, 15 Feb 2023 17:15:04 +0100	[thread overview]
Message-ID: <20230215161517.5113-5-tzimmermann@suse.de> (raw)
In-Reply-To: <20230215161517.5113-1-tzimmermann@suse.de>

Call drm_dev_enter() and drm_dev_exit() immediately after entering
cirrus' DRM helper functions. Remove these calls from other functions.
Each enter/exit block in the DRM helpers covers the full hardware
update. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/gpu/drm/tiny/cirrus.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index 71fa07535298..0b02244bd9f1 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -159,13 +159,9 @@ static int cirrus_pitch(struct drm_framebuffer *fb)
 
 static void cirrus_set_start_address(struct cirrus_device *cirrus, u32 offset)
 {
-	int idx;
 	u32 addr;
 	u8 tmp;
 
-	if (!drm_dev_enter(&cirrus->dev, &idx))
-		return;
-
 	addr = offset >> 2;
 	wreg_crt(cirrus, 0x0c, (u8)((addr >> 8) & 0xff));
 	wreg_crt(cirrus, 0x0d, (u8)(addr & 0xff));
@@ -180,8 +176,6 @@ static void cirrus_set_start_address(struct cirrus_device *cirrus, u32 offset)
 	tmp &= 0x7f;
 	tmp |= (addr >> 12) & 0x80;
 	wreg_crt(cirrus, 0x1d, tmp);
-
-	drm_dev_exit(idx);
 }
 
 static int cirrus_mode_set(struct cirrus_device *cirrus,
@@ -190,12 +184,9 @@ static int cirrus_mode_set(struct cirrus_device *cirrus,
 {
 	int hsyncstart, hsyncend, htotal, hdispend;
 	int vtotal, vdispend;
-	int tmp, idx;
+	int tmp;
 	int sr07 = 0, hdr = 0;
 
-	if (!drm_dev_enter(&cirrus->dev, &idx))
-		return -1;
-
 	htotal = mode->htotal / 8;
 	hsyncend = mode->hsync_end / 8;
 	hsyncstart = mode->hsync_start / 8;
@@ -281,7 +272,6 @@ static int cirrus_mode_set(struct cirrus_device *cirrus,
 		hdr = 0xc5;
 		break;
 	default:
-		drm_dev_exit(idx);
 		return -1;
 	}
 
@@ -311,7 +301,6 @@ static int cirrus_mode_set(struct cirrus_device *cirrus,
 	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
 	outb(0x20, 0x3c0);
 
-	drm_dev_exit(idx);
 	return 0;
 }
 
@@ -321,18 +310,12 @@ static int cirrus_fb_blit_rect(struct drm_framebuffer *fb,
 {
 	struct cirrus_device *cirrus = to_cirrus(fb->dev);
 	struct iosys_map dst;
-	int idx;
-
-	if (!drm_dev_enter(&cirrus->dev, &idx))
-		return -ENODEV;
 
 	iosys_map_set_vaddr_iomem(&dst, cirrus->vram);
 	iosys_map_incr(&dst, drm_fb_clip_offset(cirrus->pitch, fb->format, rect));
 
 	drm_fb_blit(&dst, &cirrus->pitch, cirrus->format->format, vmap, fb, rect);
 
-	drm_dev_exit(idx);
-
 	return 0;
 }
 
@@ -425,9 +408,15 @@ static void cirrus_pipe_enable(struct drm_simple_display_pipe *pipe,
 {
 	struct cirrus_device *cirrus = to_cirrus(pipe->crtc.dev);
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
+	int idx;
+
+	if (!drm_dev_enter(&cirrus->dev, &idx))
+		return;
 
 	cirrus_mode_set(cirrus, &crtc_state->mode, plane_state->fb);
 	cirrus_fb_blit_fullscreen(plane_state->fb, &shadow_plane_state->data[0]);
+
+	drm_dev_exit(idx);
 }
 
 static void cirrus_pipe_update(struct drm_simple_display_pipe *pipe,
@@ -438,12 +427,18 @@ static void cirrus_pipe_update(struct drm_simple_display_pipe *pipe,
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_rect rect;
+	int idx;
+
+	if (!drm_dev_enter(&cirrus->dev, &idx))
+		return;
 
 	if (state->fb && cirrus->format != cirrus_format(state->fb))
 		cirrus_mode_set(cirrus, &crtc->mode, state->fb);
 
 	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
 		cirrus_fb_blit_rect(state->fb, &shadow_plane_state->data[0], &rect);
+
+	drm_dev_exit(idx);
 }
 
 static const struct drm_simple_display_pipe_funcs cirrus_pipe_funcs = {
-- 
2.39.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

  parent reply	other threads:[~2023-02-15 16:25 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-15 16:15 [PATCH 00/17] cirrus: Modernize the cirrus driver Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 01/17] drm/cirrus: Compute blit destination offset in single location Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 02/17] drm/cirrus: Replace cpp value with format Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 03/17] drm/cirrus: Use drm_fb_blit() to update scanout buffer Thomas Zimmermann
2023-02-15 16:15 ` Thomas Zimmermann [this message]
2023-02-15 16:15 ` [PATCH 05/17] drm/cirrus: Split cirrus_mode_set() into smaller functions Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 06/17] drm/cirrus: Integrate connector into pipeline code Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 07/17] drm/cirrus: Move primary-plane format arrays Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 08/17] drm/cirrus: Convert to regular atomic helpers Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 09/17] drm/cirrus: Enable damage clipping on primary plane Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 10/17] drm/cirrus: Inline cirrus_fb_blit_rect() Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 11/17] drm/cirrus: Remove format test from cirrus_fb_create() Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 12/17] drm/cirrus: Remove size " Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 13/17] drm/cirrus: Test mode against video-memory size in device-wide mode_valid Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 14/17] drm/cirrus: Inline cirrus_check_size() into primary-plane atomic_check Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 15/17] drm/cirrus: Introduce struct cirrus_primary_plane_state Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 16/17] drm/cirrus: Store HW format/pitch in primary-plane state Thomas Zimmermann
2023-02-15 16:15 ` [PATCH 17/17] drm/cirrus: Use VGA macro constants to unblank Thomas Zimmermann
2023-02-16 11:33   ` Gerd Hoffmann
2023-02-16 12:03     ` Thomas Zimmermann
2023-02-16 12:33       ` Gerd Hoffmann
2023-02-16 12:52       ` Ville Syrjälä
2023-02-16 13:19         ` Gerd Hoffmann
2023-02-16 13:21         ` Thomas Zimmermann
2023-02-16 17:20           ` Ville Syrjälä
2023-02-17  8:23             ` Thomas Zimmermann
2023-02-20 14:22     ` Thomas Zimmermann
2023-02-20 15:39       ` Gerd Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230215161517.5113-5-tzimmermann@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=javierm@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=sam@ravnborg.org \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).