Re: [PATCH v4] virtio_ring: interrupt disable flag updated to vq even with event_triggered is set

* Re: [PATCH v4] virtio_ring: interrupt disable flag updated to vq even with event_triggered is set
       [not found] <20230329102300.61000-1-huangjie.albert@bytedance.com>
@ 2023-03-29 11:45 ` Xuan Zhuo
  2023-03-29 16:34   ` Michael S. Tsirkin
  2023-03-29 16:36 ` Michael S. Tsirkin
  2023-03-29 16:40 ` Michael S. Tsirkin
  2 siblings, 1 reply; 4+ messages in thread
From: Xuan Zhuo @ 2023-03-29 11:45 UTC (permalink / raw)
  To: Albert Huang
  Cc: huangjie.albert, Michael S . Tsirkin, linux-kernel,
	virtualization

On Wed, 29 Mar 2023 18:23:00 +0800, Albert Huang <huangjie.albert@bytedance.com> wrote:
> From: "huangjie.albert" <huangjie.albert@bytedance.com>
>
> in virtio_net, if we disable the napi_tx, when we triger a tx interrupt,
> the vq->event_triggered will be set to true. It will no longer be set to
> false. Unless we explicitly call virtqueue_enable_cb_delayed or
> virtqueue_enable_cb_prepare.
>
> If we disable the napi_tx, it will only be called when the tx ring
> buffer is relatively small.
>
> Because event_triggered is true. Therefore, VRING_AVAIL_F_NO_INTERRUPT or
> VRING_PACKED_EVENT_FLAG_DISABLE will not be set. So we update
> vring_used_event(&vq->split.vring) or vq->packed.vring.driver->off_wrap
> every time we call virtqueue_get_buf_ctx.This bring more interruptions.
>
> To summarize:
> 1) event_triggered was set to true in vring_interrupt()
> 2) after this nothing will happen for virtqueue_disable_cb() so
>    VRING_AVAIL_F_NO_INTERRUPT is not set in avail_flags_shadow
> 3) virtqueue_get_buf_ctx_split() will still think the cb is enabled
>    then it tries to publish new event
>
> To fix:
> update VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE to vq
> when we call virtqueue_disable_cb even the event_triggered is set to true.
>
> Tested with iperf:
> iperf3 tcp stream:
> vm1 -----------------> vm2
> vm2 just receives tcp data stream from vm1, and sends the ack to vm1,
> there are many tx interrupts in vm2.
> but without event_triggered there are just a few tx interrupts.
>
> v2->v3:
> -update the interrupt disable flag even with the event_triggered is set,
> -instead of checking whether event_triggered is set in
> -virtqueue_get_buf_ctx_{packed/split}, will cause the drivers  which have
> -not called virtqueue_{enable/disable}_cb to miss notifications.
>
> v3->v4:
> -remove change for
> -"if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE)"
> -in virtqueue_disable_cb_packed
>
> Fixes: 8d622d21d248 ("virtio: fix up virtio_disable_cb")

Hi Michael,

I want to know what the purpose of this patch("virtio: fix up virtio_disable_cb")
is. I re-review this patch. I didn't understand what the purpose of this
patches. Does it reduce one write to vring_used_event(&vq->split.vring) ?

Thanks.

> Signed-off-by: huangjie.albert <huangjie.albert@bytedance.com>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
>  drivers/virtio/virtio_ring.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> index cbeeea1b0439..ec7ab8e04846 100644
> --- a/drivers/virtio/virtio_ring.c
> +++ b/drivers/virtio/virtio_ring.c
> @@ -931,6 +931,14 @@ static void virtqueue_disable_cb_split(struct virtqueue *_vq)
>
>  	if (!(vq->split.avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT)) {
>  		vq->split.avail_flags_shadow |= VRING_AVAIL_F_NO_INTERRUPT;
> +
> +		/*
> +		 * If device triggered an event already it won't trigger one again:
> +		 * no need to disable.
> +		 */
> +		if (vq->event_triggered)
> +			return;
> +
>  		if (vq->event)
>  			/* TODO: this is a hack. Figure out a cleaner value to write. */
>  			vring_used_event(&vq->split.vring) = 0x0;
> @@ -1761,6 +1769,14 @@ static void virtqueue_disable_cb_packed(struct virtqueue *_vq)
>
>  	if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE) {
>  		vq->packed.event_flags_shadow = VRING_PACKED_EVENT_FLAG_DISABLE;
> +
> +		/*
> +		 * If device triggered an event already it won't trigger one again:
> +		 * no need to disable.
> +		 */
> +		if (vq->event_triggered)
> +			return;
> +
>  		vq->packed.vring.driver->flags =
>  			cpu_to_le16(vq->packed.event_flags_shadow);
>  	}
> @@ -2462,12 +2478,6 @@ void virtqueue_disable_cb(struct virtqueue *_vq)
>  {
>  	struct vring_virtqueue *vq = to_vvq(_vq);
>
> -	/* If device triggered an event already it won't trigger one again:
> -	 * no need to disable.
> -	 */
> -	if (vq->event_triggered)
> -		return;
> -
>  	if (vq->packed_ring)
>  		virtqueue_disable_cb_packed(_vq);
>  	else
> --
> 2.20.1
>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

^ permalink raw reply	[flat|nested] 4+ messages in thread