[PATCH net-next v4 2/2] selftests: virtio_net: add buffer circulation test

[Vishwanath Seshagiri <vishs@meta.com>]

Add iperf3-based test to verify RX buffer handling under load.
Optionally logs page_pool tracepoints when available.

Signed-off-by: Vishwanath Seshagiri <vishs@meta.com>
---
 .../drivers/net/virtio_net/basic_features.sh  | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh
index cf8cf816ed48..fa98505c4674 100755
--- a/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh
+++ b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh
@@ -6,6 +6,7 @@
 ALL_TESTS="
 	initial_ping_test
 	f_mac_test
+	buffer_circulation_test
 "
 
 source virtio_net_common.sh
@@ -16,6 +17,8 @@ source "$lib_dir"/../../../net/forwarding/lib.sh
 h1=${NETIFS[p1]}
 h2=${NETIFS[p2]}
 
+IPERF_SERVER_PID=""
+
 h1_create()
 {
 	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
@@ -83,6 +86,84 @@ f_mac_test()
 	log_test "$test_name"
 }
 
+buffer_circulation_test()
+{
+	RET=0
+	local test_name="buffer circulation"
+	local tracefs="/sys/kernel/tracing"
+
+	if ! check_command iperf3; then
+		log_test_skip "$test_name" "iperf3 not installed"
+		return 0
+	fi
+
+	setup_cleanup
+	setup_prepare
+
+	ping -c 1 -I "$h1" "$H2_IPV4" >/dev/null
+	if [ $? -ne 0 ]; then
+		check_err 1 "Ping failed"
+		log_test "$test_name"
+		return
+	fi
+
+	local rx_start=$(cat /sys/class/net/"$h2"/statistics/rx_packets)
+	local tx_start=$(cat /sys/class/net/"$h1"/statistics/tx_packets)
+
+	if [ -d "$tracefs/events/page_pool" ]; then
+		echo > "$tracefs/trace"
+		echo 1 > "$tracefs/events/page_pool/enable"
+	fi
+
+	local port=$(shuf -i 49152-65535 -n 1)
+
+	iperf3 -s -1 --bind-dev "$h2" -p "$port" &>/dev/null &
+	IPERF_SERVER_PID=$!
+	sleep 1
+
+	if ! kill -0 "$IPERF_SERVER_PID" 2>/dev/null; then
+		IPERF_SERVER_PID=""
+		if [ -d "$tracefs/events/page_pool" ]; then
+			echo 0 > "$tracefs/events/page_pool/enable"
+		fi
+		check_err 1 "iperf3 server died"
+		log_test "$test_name"
+		return
+	fi
+
+	iperf3 -c "$H2_IPV4" --bind-dev "$h1" -p "$port" -t 5 >/dev/null 2>&1
+	local iperf_ret=$?
+
+	if [ -n "$IPERF_SERVER_PID" ]; then
+		kill "$IPERF_SERVER_PID" 2>/dev/null || true
+		wait "$IPERF_SERVER_PID" 2>/dev/null || true
+		IPERF_SERVER_PID=""
+	fi
+
+	if [ -d "$tracefs/events/page_pool" ]; then
+		echo 0 > "$tracefs/events/page_pool/enable"
+		local trace="$tracefs/trace"
+		local hold=$(grep -c "page_pool_state_hold" "$trace" 2>/dev/null)
+		local release=$(grep -c "page_pool_state_release" "$trace" 2>/dev/null)
+		log_info "page_pool events: hold=${hold:-0}, release=${release:-0}"
+	fi
+
+	local rx_end=$(cat /sys/class/net/"$h2"/statistics/rx_packets)
+	local tx_end=$(cat /sys/class/net/"$h1"/statistics/tx_packets)
+	local rx_delta=$((rx_end - rx_start))
+	local tx_delta=$((tx_end - tx_start))
+
+	log_info "Circulated TX:$tx_delta RX:$rx_delta"
+
+	if [ "$iperf_ret" -ne 0 ]; then
+		check_err 1 "iperf3 failed"
+	elif [ "$rx_delta" -lt 10000 ]; then
+		check_err 1 "Too few packets: $rx_delta"
+	fi
+
+	log_test "$test_name"
+}
+
 setup_prepare()
 {
 	virtio_device_rebind $h1
@@ -113,6 +194,11 @@ setup_cleanup()
 
 cleanup()
 {
+	if [ -n "$IPERF_SERVER_PID" ]; then
+		kill "$IPERF_SERVER_PID" 2>/dev/null || true
+		wait "$IPERF_SERVER_PID" 2>/dev/null || true
+	fi
+
 	pre_cleanup
 	setup_cleanup
 }
-- 
2.47.3