From: Jason Wang <jasowang@redhat.com>
To: Tiwei Bie <tiwei.bie@intel.com>
Cc: kvm@vger.kernel.org, mst@redhat.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
virtualization@lists.linux-foundation.org,
maxime.coquelin@redhat.com, wexu@redhat.com
Subject: Re: [PATCH net-next 6/8] virtio: introduce packed ring defines
Date: Wed, 4 Jul 2018 13:26:24 +0800 [thread overview]
Message-ID: <81c82dfe-54f9-671c-695a-68c309fa1b73@redhat.com> (raw)
In-Reply-To: <20180704044823.GA22808@debian>
On 2018年07月04日 12:48, Tiwei Bie wrote:
> On Tue, Jul 03, 2018 at 01:38:02PM +0800, Jason Wang wrote:
>> Signed-off-by: Jason Wang <jasowang@redhat.com>
>> ---
>> include/uapi/linux/virtio_config.h | 2 ++
>> include/uapi/linux/virtio_ring.h | 32 ++++++++++++++++++++++++++++++++
>> 2 files changed, 34 insertions(+)
>>
>> diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
>> index 449132c..947f6a3 100644
>> --- a/include/uapi/linux/virtio_config.h
>> +++ b/include/uapi/linux/virtio_config.h
>> @@ -75,6 +75,8 @@
>> */
>> #define VIRTIO_F_IOMMU_PLATFORM 33
>>
>> +#define VIRTIO_F_RING_PACKED 34
> It's better to add some comments for this macro.
Ok.
>
>> +
>> /*
>> * Does the device support Single Root I/O Virtualization?
>> */
>> diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
>> index 6d5d5fa..71c7a46 100644
>> --- a/include/uapi/linux/virtio_ring.h
>> +++ b/include/uapi/linux/virtio_ring.h
>> @@ -43,6 +43,8 @@
>> #define VRING_DESC_F_WRITE 2
>> /* This means the buffer contains a list of buffer descriptors. */
>> #define VRING_DESC_F_INDIRECT 4
>> +#define VRING_DESC_F_AVAIL 7
> It's better to use tab between VRING_DESC_F_AVAIL and 7.
Let me fix.
>
>> +#define VRING_DESC_F_USED 15
> Maybe it's better to define VRING_DESC_F_AVAIL and
> VRING_DESC_F_USED as (1 << 7) and (1 << 15) or something
> similar to make them consistent with VRING_DESC_F_NEXT
> (1 << 0), VRING_DESC_F_WRITE (1 << 1) and
> VRING_DESC_F_INDIRECT (1 << 2).
Ok.
>
> I plan to define below macros in virtio_ring.c:
>
> #define _VRING_DESC_F_AVAIL(b) ((__u16)(b) << 7)
> #define _VRING_DESC_F_USED(b) ((__u16)(b) << 15)
>
>>
>> /* The Host uses this in used->flags to advise the Guest: don't kick me when
>> * you add a buffer. It's unreliable, so it's simply an optimization. Guest
>> @@ -62,6 +64,36 @@
>> * at the end of the used ring. Guest should ignore the used->flags field. */
>> #define VIRTIO_RING_F_EVENT_IDX 29
>>
>> +struct vring_desc_packed {
> We may have other related types named as:
>
> struct vring_packed;
> struct vring_packed_desc_event;
>
> So maybe it's better to name this type as:
>
> struct vring_packed_desc;
Yes.
>
>> + /* Buffer Address. */
>> + __virtio64 addr;
>> + /* Buffer Length. */
>> + __virtio32 len;
>> + /* Buffer ID. */
>> + __virtio16 id;
>> + /* The flags depending on descriptor type. */
>> + __virtio16 flags;
>> +};
>> +
>> +/* Enable events */
>> +#define RING_EVENT_FLAGS_ENABLE 0x0
>> +/* Disable events */
>> +#define RING_EVENT_FLAGS_DISABLE 0x1
>> +/*
>> + * Enable events for a specific descriptor
>> + * (as specified by Descriptor Ring Change Event Offset/Wrap Counter).
>> + * Only valid if VIRTIO_F_RING_EVENT_IDX has been negotiated.
>> + */
>> +#define RING_EVENT_FLAGS_DESC 0x2
> For above three macros, maybe it's better to name
> them as:
>
> VRING_EVENT_FLAGS_ENABLE
> VRING_EVENT_FLAGS_DISABLE
> VRING_EVENT_FLAGS_DESC
>
> or
>
> VRING_EVENT_F_ENABLE
> VRING_EVENT_F_DISABLE
> VRING_EVENT_F_DESC
>
> VRING_EVENT_F_* will be more consistent with
> VIRTIO_F_*, VRING_DESC_F_*, etc
True. Let me fix above in next version.
Thanks
>> +/* The value 0x3 is reserved */
>> +
>> +struct vring_packed_desc_event {
>> + /* Descriptor Ring Change Event Offset and Wrap Counter */
>> + __virtio16 off_wrap;
>> + /* Descriptor Ring Change Event Flags */
>> + __virtio16 flags;
>> +};
>> +
>> /* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
>> struct vring_desc {
>> /* Address (guest-physical). */
>> --
>> 2.7.4
>>
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
next prev parent reply other threads:[~2018-07-04 5:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 5:37 [PATCH net-next 0/8] Packed virtqueue for vhost Jason Wang
2018-07-03 5:37 ` [PATCH net-next 1/8] vhost: move get_rx_bufs to vhost.c Jason Wang
2018-07-03 5:37 ` [PATCH net-next 2/8] vhost: hide used ring layout from device Jason Wang
2018-07-03 5:37 ` [PATCH net-next 3/8] vhost: do not use vring_used_elem Jason Wang
2018-07-03 5:38 ` [PATCH net-next 4/8] vhost_net: do not explicitly manipulate vhost_used_elem Jason Wang
2018-07-03 5:38 ` [PATCH net-next 5/8] vhost: vhost_put_user() can accept metadata type Jason Wang
2018-07-03 5:38 ` [PATCH net-next 6/8] virtio: introduce packed ring defines Jason Wang
2018-07-03 5:38 ` [PATCH net-next 7/8] vhost: packed ring support Jason Wang
2018-07-03 5:38 ` [PATCH net-next 8/8] vhost: event suppression for packed ring Jason Wang
[not found] ` <1530596284-4101-9-git-send-email-jasowang@redhat.com>
2018-07-04 4:13 ` Wei Xu
2018-07-04 5:23 ` Jason Wang
2018-07-04 8:13 ` Wei Xu
[not found] ` <1530596284-4101-7-git-send-email-jasowang@redhat.com>
2018-07-04 4:48 ` [PATCH net-next 6/8] virtio: introduce packed ring defines Tiwei Bie
2018-07-04 5:26 ` Jason Wang [this message]
[not found] ` <0f293989-a0ca-e7ad-f907-83a8d8445335@redhat.com>
2018-07-05 11:30 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=81c82dfe-54f9-671c-695a-68c309fa1b73@redhat.com \
--to=jasowang@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.coquelin@redhat.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=tiwei.bie@intel.com \
--cc=virtualization@lists.linux-foundation.org \
--cc=wexu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).