From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Wei Liu <wei.liu@kernel.org>,
Linux on Hyper-V List <linux-hyperv@vger.kernel.org>
Cc: "open list:GENERIC INCLUDE/ASM HEADER FILES"
<linux-arch@vger.kernel.org>, Wei Liu <wei.liu@kernel.org>,
Stephen Hemminger <sthemmin@microsoft.com>,
Arnd Bergmann <arnd@arndb.de>,
Haiyang Zhang <haiyangz@microsoft.com>,
"maintainer:X86 ARCHITECTURE \(32-BIT AND 64-BIT\)"
<x86@kernel.org>,
virtualization@lists.linux-foundation.org,
Linux Kernel List <linux-kernel@vger.kernel.org>,
Nuno Das Neves <nudasnev@microsoft.com>,
Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>, Borislav Petkov <bp@alien8.de>,
Sunil Muthuswamy <sunilmut@microsoft.com>,
Michael Kelley <mikelley@microsoft.com>,
Vineeth Pillai <viremana@linux.microsoft.com>,
Lillian Grassin-Drake <ligrassi@microsoft.com>
Subject: Re: [PATCH RFC v1 07/18] x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
Date: Tue, 15 Sep 2020 12:27:16 +0200 [thread overview]
Message-ID: <87y2lbjpx7.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20200914112802.80611-8-wei.liu@kernel.org>
Wei Liu <wei.liu@kernel.org> writes:
> We will need the partition ID for executing some hypercalls later.
>
> Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
> Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> ---
> arch/x86/hyperv/hv_init.c | 26 ++++++++++++++++++++++++++
> arch/x86/include/asm/mshyperv.h | 2 ++
> include/asm-generic/hyperv-tlfs.h | 6 ++++++
> 3 files changed, 34 insertions(+)
>
> diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
> index ebba4be4185d..0eec1ed32023 100644
> --- a/arch/x86/hyperv/hv_init.c
> +++ b/arch/x86/hyperv/hv_init.c
> @@ -30,6 +30,9 @@
> bool hv_root_partition;
> EXPORT_SYMBOL_GPL(hv_root_partition);
>
> +u64 hv_current_partition_id;
> +EXPORT_SYMBOL_GPL(hv_current_partition_id);
> +
> void *hv_hypercall_pg;
> EXPORT_SYMBOL_GPL(hv_hypercall_pg);
>
> @@ -345,6 +348,26 @@ static struct syscore_ops hv_syscore_ops = {
> .resume = hv_resume,
> };
>
> +void __init hv_get_partition_id(void)
> +{
> + struct hv_get_partition_id *output_page;
> + int status;
> + unsigned long flags;
> +
> + local_irq_save(flags);
> + output_page = *this_cpu_ptr(hyperv_pcpu_output_arg);
> + status = hv_do_hypercall(HVCALL_GET_PARTITION_ID, NULL, output_page) &
> + HV_HYPERCALL_RESULT_MASK;
Nit: in this case status is 'u16', we can define it as such (instead of
signed int).
> + if (status != HV_STATUS_SUCCESS)
> + pr_err("Failed to get partition ID: %d\n", status);
> + else
> + hv_current_partition_id = output_page->partition_id;
> + local_irq_restore(flags);
> +
> + /* No point in proceeding if this failed */
> + BUG_ON(status != HV_STATUS_SUCCESS);
> +}
> +
> /*
> * This function is to be invoked early in the boot sequence after the
> * hypervisor has been detected.
> @@ -440,6 +463,9 @@ void __init hyperv_init(void)
>
> register_syscore_ops(&hv_syscore_ops);
>
> + if (hv_root_partition)
> + hv_get_partition_id();
According to TLFS, partition ID is available when AccessPartitionId
privilege is granted. I'd suggest we check that instead of
hv_root_partition (and we can set hv_current_partition_id to something
like U64_MAX so we know it wasn't acuired). So the BUG_ON condition will
move here:
hv_get_partition_id();
BUG_ON(hv_root_partition && hv_current_partition_id == U64_MAX);
> +
> return;
>
> remove_cpuhp_state:
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index f5c62140f28d..4039302e0ae9 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -65,6 +65,8 @@ extern void *hv_hypercall_pg;
> extern void __percpu **hyperv_pcpu_input_arg;
> extern void __percpu **hyperv_pcpu_output_arg;
>
> +extern u64 hv_current_partition_id;
> +
> static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
> {
> u64 input_address = input ? virt_to_phys(input) : 0;
> diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
> index e6903589a82a..87b1a79b19eb 100644
> --- a/include/asm-generic/hyperv-tlfs.h
> +++ b/include/asm-generic/hyperv-tlfs.h
> @@ -141,6 +141,7 @@ struct ms_hyperv_tsc_page {
> #define HVCALL_FLUSH_VIRTUAL_ADDRESS_SPACE_EX 0x0013
> #define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX 0x0014
> #define HVCALL_SEND_IPI_EX 0x0015
> +#define HVCALL_GET_PARTITION_ID 0x0046
> #define HVCALL_GET_VP_REGISTERS 0x0050
> #define HVCALL_SET_VP_REGISTERS 0x0051
> #define HVCALL_POST_MESSAGE 0x005c
> @@ -407,6 +408,11 @@ struct hv_tlb_flush_ex {
> u64 gva_list[];
> } __packed;
>
> +/* HvGetPartitionId hypercall (output only) */
> +struct hv_get_partition_id {
> + u64 partition_id;
> +} __packed;
> +
> /* HvRetargetDeviceInterrupt hypercall */
> union hv_msi_entry {
> u64 as_uint64;
--
Vitaly
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
next prev parent reply other threads:[~2020-09-15 10:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200914112802.80611-1-wei.liu@kernel.org>
[not found] ` <20200914112802.80611-6-wei.liu@kernel.org>
2020-09-15 10:10 ` [PATCH RFC v1 05/18] clocksource/hyperv: use MSR-based access if running as root Vitaly Kuznetsov
[not found] ` <20200914112802.80611-7-wei.liu@kernel.org>
2020-09-15 10:16 ` [PATCH RFC v1 06/18] x86/hyperv: allocate output arg pages if required Vitaly Kuznetsov
[not found] ` <20200915124318.z6tisek5y4d7e254@liuwe-devbox-debian-v2>
[not found] ` <20200916154200.7nf74vjmqu3f6sfq@liuwe-devbox-debian-v2>
2020-09-16 16:10 ` Vitaly Kuznetsov
[not found] ` <20200914112802.80611-8-wei.liu@kernel.org>
2020-09-15 10:27 ` Vitaly Kuznetsov [this message]
[not found] ` <20200914112802.80611-9-wei.liu@kernel.org>
2020-09-15 10:32 ` [PATCH RFC v1 08/18] x86/hyperv: handling hypercall page setup for root Vitaly Kuznetsov
[not found] ` <20200915103710.cqmdvzh5lys4wsqo@liuwe-devbox-debian-v2>
2020-09-15 11:02 ` Vitaly Kuznetsov
[not found] ` <20200915111657.boa4cneqjqtmcaaq@liuwe-devbox-debian-v2>
2020-09-15 11:23 ` Vitaly Kuznetsov
2020-09-16 21:34 ` [EXTERNAL] " Sunil Muthuswamy via Virtualization
2020-09-17 11:06 ` Vitaly Kuznetsov
[not found] ` <20200914115928.83184-1-wei.liu@kernel.org>
2020-09-15 11:00 ` [PATCH RFC v1 09/18] x86/hyperv: provide a bunch of helper functions Vitaly Kuznetsov
[not found] ` <20200914115928.83184-2-wei.liu@kernel.org>
2020-09-15 11:14 ` [PATCH RFC v1 10/18] x86/hyperv: implement and use hv_smp_prepare_cpus Vitaly Kuznetsov
[not found] ` <20200914115928.83184-5-wei.liu@kernel.org>
2020-09-15 11:16 ` [PATCH RFC v1 13/18] asm-generic/hyperv: introduce hv_device_id and auxiliary structures Vitaly Kuznetsov
[not found] ` <20200914112802.80611-5-wei.liu@kernel.org>
2020-09-18 9:12 ` [PATCH RFC v1 04/18] iommu/hyperv: don't setup IRQ remapping when running as root Joerg Roedel
[not found] ` <20200914115928.83184-4-wei.liu@kernel.org>
2020-10-01 14:33 ` [PATCH RFC v1 12/18] asm-generic/hyperv: update hv_interrupt_entry Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y2lbjpx7.fsf@vitty.brq.redhat.com \
--to=vkuznets@redhat.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=haiyangz@microsoft.com \
--cc=hpa@zytor.com \
--cc=ligrassi@microsoft.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mingo@redhat.com \
--cc=nudasnev@microsoft.com \
--cc=sthemmin@microsoft.com \
--cc=sunilmut@microsoft.com \
--cc=tglx@linutronix.de \
--cc=viremana@linux.microsoft.com \
--cc=virtualization@lists.linux-foundation.org \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).