From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: linux-kernel@vger.kernel.org, Xen-devel@lists.xensource.com,
konrad@kernel.org, jeremy@goop.org
Cc: hpa@zytor.com, stefano.stabellini@eu.citrix.com,
Ian.Campbell@eu.citrix.com,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH 09/11] xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
Date: Mon, 31 Jan 2011 17:44:34 -0500 [thread overview]
Message-ID: <1296513876-31415-10-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1296513876-31415-1-git-send-email-konrad.wilk@oracle.com>
Only enabled if XEN_DEBUG is enabled. We print a warning
when:
pfn_to_mfn(pfn) == pfn, but no VM_IO (_PAGE_IOMAP) flag set
(and pfn is an identity mapped pfn)
pfn_to_mfn(pfn) != pfn, and VM_IO flag is set.
(ditto, pfn is an identity mapped pfn)
[v2: Make it dependent on CONFIG_XEN_DEBUG instead of ..DEBUG_FS]
[v3: Fix compiler warning]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
arch/x86/xen/Kconfig | 8 ++++++++
arch/x86/xen/mmu.c | 38 ++++++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+), 0 deletions(-)
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 5b54892..e4343fe 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -48,3 +48,11 @@ config XEN_DEBUG_FS
help
Enable statistics output and various tuning options in debugfs.
Enabling this option may incur a significant performance overhead.
+
+config XEN_DEBUG
+ bool "Enable Xen debug checks"
+ depends on XEN
+ default n
+ help
+ Enable various WARN_ON checks in the Xen MMU code.
+ Enabling this option WILL incur a significant performance overhead.
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index b13b6ca..0c376a2 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -547,6 +547,41 @@ pte_t xen_make_pte(pteval_t pte)
}
PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte);
+#ifdef CONFIG_XEN_DEBUG
+pte_t xen_make_pte_debug(pteval_t pte)
+{
+ phys_addr_t addr = (pte & PTE_PFN_MASK);
+ phys_addr_t other_addr;
+ bool io_page = false;
+ pte_t _pte;
+
+ if (pte & _PAGE_IOMAP)
+ io_page = true;
+
+ _pte = xen_make_pte(pte);
+
+ if (!addr)
+ return _pte;
+
+ if (io_page &&
+ (xen_initial_domain() || addr >= ISA_END_ADDRESS)) {
+ other_addr = pfn_to_mfn(addr >> PAGE_SHIFT) << PAGE_SHIFT;
+ WARN(addr != other_addr,
+ "0x%lx is using VM_IO, but it is 0x%lx!\n",
+ (unsigned long)addr, (unsigned long)other_addr);
+ } else {
+ pteval_t iomap_set = (_pte.pte & PTE_FLAGS_MASK) & _PAGE_IOMAP;
+ other_addr = (_pte.pte & PTE_PFN_MASK);
+ WARN((addr == other_addr) && (!io_page) && (!iomap_set),
+ "0x%lx is missing VM_IO (and wasn't fixed)!\n",
+ (unsigned long)addr);
+ }
+
+ return _pte;
+}
+PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte_debug);
+#endif
+
pgd_t xen_make_pgd(pgdval_t pgd)
{
pgd = pte_pfn_to_mfn(pgd);
@@ -1957,6 +1992,9 @@ __init void xen_ident_map_ISA(void)
static __init void xen_post_allocator_init(void)
{
+#ifdef CONFIG_XEN_DEBUG
+ pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug);
+#endif
pv_mmu_ops.set_pte = xen_set_pte;
pv_mmu_ops.set_pmd = xen_set_pmd;
pv_mmu_ops.set_pud = xen_set_pud;
--
1.7.1
next prev parent reply other threads:[~2011-01-31 22:44 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 22:44 [PATCH v4] Consider E820 non-RAM and E820 gaps as 1-1 mappings Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 01/11] xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 02/11] xen/mmu: Add the notion of identity (1-1) mapping Konrad Rzeszutek Wilk
2011-02-01 21:33 ` Jeremy Fitzhardinge
2011-01-31 22:44 ` [PATCH 03/11] xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 04/11] xen/mmu: BUG_ON when racing to swap middle leaf Konrad Rzeszutek Wilk
2011-02-01 21:34 ` Jeremy Fitzhardinge
2011-01-31 22:44 ` [PATCH 05/11] xen/setup: Set identity mapping for non-RAM E820 and E820 gaps Konrad Rzeszutek Wilk
2011-02-01 22:32 ` Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 06/11] xen/setup: Skip over 1st gap after System RAM Konrad Rzeszutek Wilk
2011-02-01 15:08 ` Ian Campbell
2011-02-01 17:14 ` H. Peter Anvin
2011-02-01 22:28 ` Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 07/11] x86/setup: Consult the raw E820 for zero sized E820 RAM regions Konrad Rzeszutek Wilk
2011-02-01 17:52 ` Stefano Stabellini
2011-02-01 22:29 ` [Xen-devel] " Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 08/11] xen/debugfs: Add 'p2m' file for printing out the P2M layout Konrad Rzeszutek Wilk
2011-01-31 22:44 ` Konrad Rzeszutek Wilk [this message]
2011-01-31 22:44 ` [PATCH 10/11] xen/m2p: No need to catch exceptions when we know that there is no RAM Konrad Rzeszutek Wilk
2011-01-31 22:44 ` [PATCH 11/11] xen/m2p: Check whether the MFN has IDENTITY_FRAME bit set Konrad Rzeszutek Wilk
2011-02-01 17:52 ` Stefano Stabellini
2011-02-01 20:29 ` Konrad Rzeszutek Wilk
2011-02-02 11:52 ` Stefano Stabellini
2011-02-02 16:43 ` Konrad Rzeszutek Wilk
2011-02-02 18:32 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296513876-31415-10-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=Ian.Campbell@eu.citrix.com \
--cc=Xen-devel@lists.xensource.com \
--cc=hpa@zytor.com \
--cc=jeremy@goop.org \
--cc=konrad@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stefano.stabellini@eu.citrix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).