From: David Vrabel <david.vrabel@citrix.com>
To: xen-devel@lists.xensource.com
Cc: David Vrabel <david.vrabel@citrix.com>,
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH 3/5] xen: allow balloon driver to use more than one memory region
Date: Fri, 19 Aug 2011 15:57:18 +0100 [thread overview]
Message-ID: <1313765840-22084-4-git-send-email-david.vrabel@citrix.com> (raw)
In-Reply-To: <1313765840-22084-1-git-send-email-david.vrabel@citrix.com>
Allow the xen balloon driver to populate its list of extra pages from
more than one region of memory. This will allow platforms to provide
(for example) a region of low memory and a region of high memory.
The maximum possible number of extra regions is 128 (== E820MAX) which
is quite large so xen_extra_mem is placed in __initdata. This is safe
as both xen_memeory_setup() and balloon_init() are in __init.
The balloon regions themselves are not altered (i.e., there is still
only the one region).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
---
arch/x86/xen/setup.c | 20 +++++++++---------
drivers/xen/balloon.c | 51 ++++++++++++++++++++++++++++--------------------
include/xen/page.h | 9 +++++++-
3 files changed, 48 insertions(+), 32 deletions(-)
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index c3b8d44..4720c2d 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -37,7 +37,7 @@ extern void xen_syscall_target(void);
extern void xen_syscall32_target(void);
/* Amount of extra memory space we add to the e820 ranges */
-phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
+struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata;
/*
* The maximum amount of extra memory compared to the base size. The
@@ -56,7 +56,7 @@ static void __init xen_add_extra_mem(unsigned long pages)
unsigned long pfn;
u64 size = (u64)pages * PAGE_SIZE;
- u64 extra_start = xen_extra_mem_start + xen_extra_mem_size;
+ u64 extra_start = xen_extra_mem[0].start + xen_extra_mem[0].size;
if (!pages)
return;
@@ -66,7 +66,7 @@ static void __init xen_add_extra_mem(unsigned long pages)
memblock_x86_reserve_range(extra_start, extra_start + size, "XEN EXTRA");
- xen_extra_mem_size += size;
+ xen_extra_mem[0].size += size;
xen_max_p2m_pfn = PFN_DOWN(extra_start + size);
@@ -239,7 +239,7 @@ char * __init xen_memory_setup(void)
memcpy(map_raw, map, sizeof(map));
e820.nr_map = 0;
- xen_extra_mem_start = mem_end;
+ xen_extra_mem[0].start = mem_end;
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end;
@@ -267,8 +267,8 @@ char * __init xen_memory_setup(void)
e820_add_region(end, delta, E820_UNUSABLE);
}
- if (map[i].size > 0 && end > xen_extra_mem_start)
- xen_extra_mem_start = end;
+ if (map[i].size > 0 && end > xen_extra_mem[0].start)
+ xen_extra_mem[0].start = end;
/* Add region if any remains */
if (map[i].size > 0)
@@ -276,10 +276,10 @@ char * __init xen_memory_setup(void)
}
/* Align the balloon area so that max_low_pfn does not get set
* to be at the _end_ of the PCI gap at the far end (fee01000).
- * Note that xen_extra_mem_start gets set in the loop above to be
- * past the last E820 region. */
- if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32)))
- xen_extra_mem_start = (1ULL<<32);
+ * Note that the start of balloon area gets set in the loop above
+ * to be past the last E820 region. */
+ if (xen_initial_domain() && (xen_extra_mem[0].start < (1ULL<<32)))
+ xen_extra_mem[0].start = (1ULL<<32);
/*
* In domU, the ISA region is normal, usable memory, but we
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 5814022..996cf65 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -555,11 +555,35 @@ void free_xenballooned_pages(int nr_pages, struct page** pages)
}
EXPORT_SYMBOL(free_xenballooned_pages);
-static int __init balloon_init(void)
+static void __init balloon_add_memory_region(unsigned long start_pfn, unsigned long pages)
{
- domid_t domid = DOMID_SELF;
unsigned long pfn, extra_pfn_end;
struct page *page;
+
+ /*
+ * Initialise the balloon with excess memory space. We need
+ * to make sure we don't add memory which doesn't exist or
+ * logically exist. The E820 map can be trimmed to be smaller
+ * than the amount of physical memory due to the mem= command
+ * line parameter. And if this is a 32-bit non-HIGHMEM kernel
+ * on a system with memory which requires highmem to access,
+ * don't try to use it.
+ */
+ extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
+ start_pfn + pages);
+ for (pfn = start_pfn; pfn < extra_pfn_end; pfn++) {
+ page = pfn_to_page(pfn);
+ /* totalram_pages and totalhigh_pages do not
+ include the boot-time balloon extension, so
+ don't subtract from it. */
+ __balloon_append(page);
+ }
+}
+
+static int __init balloon_init(void)
+{
+ domid_t domid = DOMID_SELF;
+ int i;
int ret;
if (!xen_domain())
@@ -588,25 +612,10 @@ static int __init balloon_init(void)
register_memory_notifier(&xen_memory_nb);
#endif
- /*
- * Initialise the balloon with excess memory space. We need
- * to make sure we don't add memory which doesn't exist or
- * logically exist. The E820 map can be trimmed to be smaller
- * than the amount of physical memory due to the mem= command
- * line parameter. And if this is a 32-bit non-HIGHMEM kernel
- * on a system with memory which requires highmem to access,
- * don't try to use it.
- */
- extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
- (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
- for (pfn = PFN_UP(xen_extra_mem_start);
- pfn < extra_pfn_end;
- pfn++) {
- page = pfn_to_page(pfn);
- /* totalram_pages and totalhigh_pages do not include the boot-time
- balloon extension, so don't subtract from it. */
- __balloon_append(page);
- }
+ for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++)
+ if (xen_extra_mem[i].size)
+ balloon_add_memory_region(PFN_UP(xen_extra_mem[i].start),
+ PFN_DOWN(xen_extra_mem[i].size));
return 0;
}
diff --git a/include/xen/page.h b/include/xen/page.h
index 0be36b9..b432c03 100644
--- a/include/xen/page.h
+++ b/include/xen/page.h
@@ -3,6 +3,13 @@
#include <asm/xen/page.h>
-extern phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
+struct xen_memory_region {
+ phys_addr_t start;
+ phys_addr_t size;
+};
+
+#define XEN_EXTRA_MEM_MAX_REGIONS 128 /* == E820MAX */
+
+extern struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS];
#endif /* _XEN_PAGE_H */
--
1.7.2.5
next prev parent reply other threads:[~2011-08-19 14:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-19 14:57 xen: memory initialization/balloon fixes (#2) David Vrabel
2011-08-19 14:57 ` [PATCH 1/5] xen: use maximum reservation to limit amount of usable RAM David Vrabel
2011-08-31 20:40 ` Konrad Rzeszutek Wilk
2011-09-01 12:12 ` David Vrabel
2011-09-01 13:14 ` Konrad Rzeszutek Wilk
2011-08-19 14:57 ` [PATCH 2/5] xen/balloon: account for pages released during memory setup David Vrabel
2011-09-06 21:31 ` Konrad Rzeszutek Wilk
2011-09-08 15:01 ` David Vrabel
2011-08-19 14:57 ` David Vrabel [this message]
2011-09-06 21:57 ` [PATCH 3/5] xen: allow balloon driver to use more than one memory region Konrad Rzeszutek Wilk
2011-09-07 10:44 ` David Vrabel
2011-09-07 18:09 ` Konrad Rzeszutek Wilk
2011-08-19 14:57 ` [PATCH 4/5] xen: allow extra memory to be in multiple regions David Vrabel
2011-09-07 12:28 ` Konrad Rzeszutek Wilk
2011-08-19 14:57 ` [PATCH 5/5] xen: release all pages within 1-1 p2m mappings David Vrabel
2011-08-19 15:05 ` David Vrabel
2011-09-06 21:20 ` Konrad Rzeszutek Wilk
2011-09-07 11:03 ` David Vrabel
2011-09-07 18:23 ` Konrad Rzeszutek Wilk
2011-08-22 14:49 ` xen: memory initialization/balloon fixes (#2) Konrad Rzeszutek Wilk
-- strict thread matches above, loose matches on Subject: below --
2011-09-28 16:46 [PATCH 0/5] xen: memory initialization/balloon fixes (#4) David Vrabel
2011-09-28 16:46 ` [PATCH 3/5] xen: allow balloon driver to use more than one memory region David Vrabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313765840-22084-4-git-send-email-david.vrabel@citrix.com \
--to=david.vrabel@citrix.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).