From: komkon555 <komkon555@freenet.de>
To: xen-devel@lists.xensource.com
Subject: Re: Re : Re : Re : Re: Patches for VGA-Passthrough XEN 4.2 unstable
Date: Wed, 21 Sep 2011 07:32:06 -0700 (PDT) [thread overview]
Message-ID: <1316615526442-4826582.post@n5.nabble.com> (raw)
In-Reply-To: <1316614084705-4826479.post@n5.nabble.com>
So, in this case you should try first of all
http://pasik.reaktio.net/xen/kernel-config/config-2.6.32.43-pvops-dom0-xen-stable-x86_64
this configuration file for xen-kernel (compile it from the very beginning
with last one). Just edit this config to "xenfs=y". Delete all original
(stock) xen-programms (kernel, xen, xen-utils and so on) and xendomain,
xencommon, xend from /etc/init.d/. Than compile jeremy kernel with new
config:
$ cd /usr/src/linux
$ make oldconfig
$ sudo make
$ sudo apt-get install kernel-package fakeroot
$ export CONCURRENCY_LEVEL=<number_of_cores +1>
$ sudo make-kpkg clean
$ sudo fakeroot make-kpkg --initrd --append-to-version=-pv kernel-image
kernel-headers
$ sudo dpkg -i ../<linux-image-2.6.XXX.deb>
See details with this http://wiki.xensource.com/xenwiki/XenParavirtOps link
.
Than compile and install xen-unstable.
After reboot you have to run /etc/init.d/xencommons start and
/etc/init.d/xend start manually. If any reports about missing modules load
them first.
Best regards.
--
View this message in context: http://xen.1045712.n5.nabble.com/Patches-for-VGA-Passthrough-XEN-4-2-unstable-tp4406265p4826582.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
next prev parent reply other threads:[~2011-09-21 14:32 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-18 11:47 Patches for VGA-Passthrough XEN 4.2 unstable JavMV
2011-05-23 10:48 ` Stefano Stabellini
2011-05-23 12:35 ` Pasi Kärkkäinen
2011-05-23 12:49 ` Pavel Mateja
2011-05-30 10:53 ` JavMV
2011-05-31 12:10 ` JavMV
2011-06-23 19:18 ` JavMV
2011-06-27 15:33 ` Konrad Rzeszutek Wilk
2011-06-27 15:42 ` JavMV
[not found] ` <1312297850948-4659036.post@n5.nabble.com>
2011-08-30 10:21 ` komkon555
2011-08-30 13:55 ` JavMV
2011-08-30 15:00 ` komkon555
2011-08-30 16:06 ` JavMV
2011-08-31 8:16 ` komkon555
2011-08-31 8:38 ` Pasi Kärkkäinen
2011-08-31 8:49 ` komkon555
2011-08-31 12:56 ` komkon555
2011-08-31 15:19 ` Pasi Kärkkäinen
2011-09-05 14:02 ` David TECHER
2011-09-06 11:57 ` komkon555
2011-09-06 21:17 ` Re : " David TECHER
2011-09-07 8:05 ` komkon555
2011-09-07 9:45 ` David TECHER
2011-09-07 9:52 ` Re : " David TECHER
2011-09-07 12:26 ` komkon555
2011-09-07 12:51 ` Re : " David TECHER
2011-09-07 18:52 ` Konrad Rzeszutek Wilk
2011-09-07 19:57 ` Re : " David TECHER
2011-09-09 1:45 ` Weidong Han
2011-09-09 8:07 ` komkon555
2011-09-07 13:25 ` komkon555
2011-09-07 13:54 ` JavMV
2011-09-07 14:22 ` Re : " David TECHER
2011-09-07 14:32 ` komkon555
2011-09-07 15:22 ` JavMV
2011-09-07 16:21 ` komkon555
2011-09-07 16:25 ` Re : " David TECHER
2011-09-09 7:54 ` komkon555
2011-09-09 12:29 ` JavMV
2011-09-09 13:28 ` Pasi Kärkkäinen
2011-09-09 16:09 ` Wei Huang
2011-09-09 19:56 ` Re : " David TECHER
2011-09-10 10:27 ` Pasi Kärkkäinen
2011-09-21 13:44 ` JavMV
2011-09-21 13:56 ` komkon555
2011-09-21 14:08 ` JavMV
2011-09-21 14:24 ` JavMV
2011-09-21 14:32 ` komkon555 [this message]
2011-09-21 14:40 ` komkon555
2011-09-21 14:47 ` komkon555
2011-09-21 14:52 ` JavMV
2011-09-21 15:13 ` Re : " David TECHER
2011-09-22 12:15 ` JavMV
2011-09-22 12:45 ` komkon555
2011-09-22 12:55 ` JavMV
2011-09-22 17:41 ` JavMV
2011-09-22 18:27 ` Pasi Kärkkäinen
2011-09-22 21:54 ` JavMV
2011-09-23 11:34 ` JavMV
2011-09-23 14:00 ` JavMV
2011-09-23 14:52 ` JavMV
2011-09-23 15:12 ` komkon555
2011-09-23 17:21 ` Pasi Kärkkäinen
2011-10-15 10:00 ` David TECHER
2011-10-26 11:54 ` Zoltan Hubai
2011-10-26 13:35 ` Re : " David TECHER
2011-10-27 5:58 ` Zoltan Hubai
2011-10-27 10:14 ` Re : " David TECHER
2011-12-05 22:26 ` n4rC0t1C
2011-12-06 11:22 ` Re : " David TECHER
2011-12-06 12:04 ` n4rC0t1C
2011-12-06 13:57 ` Re : " David TECHER
2011-12-06 15:19 ` Tobias Geiger
2011-12-06 15:56 ` Re : " David TECHER
2011-12-06 22:28 ` David TECHER
2011-12-07 11:01 ` n4rC0t1C
2011-12-07 11:44 ` Tobias Geiger
2011-12-10 8:12 ` Sythrar
2011-12-10 12:29 ` n4rC0t1C
2011-12-13 21:03 ` Sythrar
2011-12-14 9:43 ` Tobias Geiger
2011-12-14 13:37 ` n4rC0t1C
2012-02-16 13:38 ` Jamesffs
2012-02-17 8:34 ` Tobias Geiger
2012-02-17 11:32 ` Jamesffs
2012-02-17 16:19 ` Tobias Geiger
2012-02-20 11:55 ` Jamesffs
2012-02-20 12:16 ` Jamesffs
2012-02-20 13:32 ` Tobias Geiger
2011-12-10 12:29 ` n4rC0t1C
2011-09-09 11:31 ` Liwei
2011-09-09 16:17 ` Wei Huang
2011-09-09 16:42 ` Liwei
2011-09-12 12:49 ` Tobias Geiger
2012-01-05 23:15 ` romihs
2012-01-06 1:13 ` n4rC0t1C
2012-01-06 14:23 ` Re : " David TECHER
2012-01-06 16:22 ` -+= Lta =+-
2012-01-06 16:34 ` n4rC0t1C
2012-01-06 16:51 ` -+= Lta =+-
2012-01-06 16:58 ` Re : " David TECHER
2012-01-06 17:00 ` David TECHER
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316615526442-4826582.post@n5.nabble.com \
--to=komkon555@freenet.de \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).