VGABIOS patches

VGABIOS patches

[Frediano Ziglio]

Couple of patches to fix an overflow, optimize a bit and support bigger
resolutions using Windows 8.

[PATCH 1/7] vgabios: Output to Xen debug port instead of using Bochs one

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vgabios.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/firmware/vgabios/vgabios.c b/tools/firmware/vgabios/vgabios.c
index a9dbe00..e0b1ed9 100644
--- a/tools/firmware/vgabios/vgabios.c
+++ b/tools/firmware/vgabios/vgabios.c
@@ -3811,9 +3811,9 @@ void printf(s)
         for (i=0; i<format_width; i++) {
           nibble = (arg >> (4 * digit)) & 0x000f;
           if (nibble <= 9)
-            outb(0xe9, nibble + '0');
+            outb(0x12, nibble + '0');
           else
-            outb(0xe9, (nibble - 10) + 'A');
+            outb(0x12, (nibble - 10) + 'A');
           digit--;
           }
         in_format = 0;
@@ -3823,7 +3823,7 @@ void printf(s)
       //  }
       }
     else {
-      outb(0xe9, c);
+      outb(0x12, c);
       }
     s ++;
     }
-- 
1.7.5.4

Re: [PATCH 1/7] vgabios: Output to Xen debug port instead of using Bochs one

[Paul Durrant]

I'm confused. Last time I looked 0xE9 was the xen debug port. 

  Paul

> -----Original Message-----
> From: xen-devel-bounces@lists.xen.org [mailto:xen-devel-
> bounces@lists.xen.org] On Behalf Of Frediano Ziglio
> Sent: 01 May 2012 14:53
> To: Frediano Ziglio; xen-devel@lists.xen.org
> Subject: [Xen-devel] [PATCH 1/7] vgabios: Output to Xen debug port instead
> of using Bochs one
> 
> 
> Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
> ---
>  tools/firmware/vgabios/vgabios.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/tools/firmware/vgabios/vgabios.c
> b/tools/firmware/vgabios/vgabios.c
> index a9dbe00..e0b1ed9 100644
> --- a/tools/firmware/vgabios/vgabios.c
> +++ b/tools/firmware/vgabios/vgabios.c
> @@ -3811,9 +3811,9 @@ void printf(s)
>          for (i=0; i<format_width; i++) {
>            nibble = (arg >> (4 * digit)) & 0x000f;
>            if (nibble <= 9)
> -            outb(0xe9, nibble + '0');
> +            outb(0x12, nibble + '0');
>            else
> -            outb(0xe9, (nibble - 10) + 'A');
> +            outb(0x12, (nibble - 10) + 'A');
>            digit--;
>            }
>          in_format = 0;
> @@ -3823,7 +3823,7 @@ void printf(s)
>        //  }
>        }
>      else {
> -      outb(0xe9, c);
> +      outb(0x12, c);
>        }
>      s ++;
>      }
> --
> 1.7.5.4
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel

[PATCH 2/7] vgabios: Does not define cur_mode if not required

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vbe.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/tools/firmware/vgabios/vbe.c b/tools/firmware/vgabios/vbe.c
index 3fc786d..3d42216 100644
--- a/tools/firmware/vgabios/vbe.c
+++ b/tools/firmware/vgabios/vbe.c
@@ -761,7 +761,9 @@ Bit16u *AX;Bit16u ES;Bit16u DI;
         Bit16u            status;
         Bit16u            result;
         Bit16u            vbe2_info;
+#ifdef DEBUG
         Bit16u            cur_mode=0;
+#endif
         Bit16u            cur_ptr=34;
         ModeInfoListItem  *cur_info=&mode_info_list;
         
@@ -849,9 +851,9 @@ Bit16u *AX;Bit16u ES;Bit16u DI;
                     (cur_info->info.XResolution * cur_info->info.XResolution * cur_info->info.BitsPerPixel <= vbe_info_block.TotalMemory << 19 )) {
 #ifdef DEBUG
                   printf("VBE found mode %x => %x\n", cur_info->mode,cur_mode);
+                  cur_mode++;
 #endif
                   write_word(ES, DI + cur_ptr, cur_info->mode);
-                  cur_mode++;
                   cur_ptr+=2;
                 } else {
 #ifdef DEBUG
-- 
1.7.5.4

[PATCH 3/7] vgabios: Fix size computation overflow

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vbe.c |   30 ++++++++++++++++++++++++++++--
 1 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/tools/firmware/vgabios/vbe.c b/tools/firmware/vgabios/vbe.c
index 3d42216..35d9866 100644
--- a/tools/firmware/vgabios/vbe.c
+++ b/tools/firmware/vgabios/vbe.c
@@ -742,6 +742,29 @@ no_vbe_flag:
   jmp  _display_string
 ASM_END  
 
+ASM_START
+_size64:
+  push bp
+  mov  bp, sp
+  push dx
+
+; multiply bbp by yres first as results fit in 16bits
+; then multiply by xres
+  mov  ax, 8[bp]
+  mul  word 6[bp]
+  mul  word 4[bp]
+; divide by 2^19 ceiling result
+  add  ax, #0xffff
+  adc  dx, #7
+  mov  ax, dx
+  shr  ax, #3
+
+  pop  dx
+  pop  bp
+  ret
+ASM_END
+
+
 /** Function 00h - Return VBE Controller Information
  * 
  * Input:
@@ -846,9 +869,12 @@ Bit16u *AX;Bit16u ES;Bit16u DI;
                 
         do
         {
+                Bit16u size_64k = size64(cur_info->info.XResolution, cur_info->info.YResolution, cur_info->info.BitsPerPixel);
+                Bit16u max_bpp = dispi_get_max_bpp();
+
                 if ((cur_info->info.XResolution <= dispi_get_max_xres()) &&
-                    (cur_info->info.BitsPerPixel <= dispi_get_max_bpp()) &&
-                    (cur_info->info.XResolution * cur_info->info.XResolution * cur_info->info.BitsPerPixel <= vbe_info_block.TotalMemory << 19 )) {
+                    (cur_info->info.BitsPerPixel <= max_bpp) &&
+                    (size_64k <= vbe_info_block.TotalMemory)) {
 #ifdef DEBUG
                   printf("VBE found mode %x => %x\n", cur_info->mode,cur_mode);
                   cur_mode++;
-- 
1.7.5.4

[PATCH 4/7] vgabios: Report mode not supported getting mode informations

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vbe.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/firmware/vgabios/vbe.c b/tools/firmware/vgabios/vbe.c
index 35d9866..fff314e 100644
--- a/tools/firmware/vgabios/vbe.c
+++ b/tools/firmware/vgabios/vbe.c
@@ -911,7 +911,8 @@ Bit16u *AX;Bit16u ES;Bit16u DI;
 void vbe_biosfn_return_mode_information(AX, CX, ES, DI)
 Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
 {
-        Bit16u            result=0x0100;
+        // error by default is 0x014f which means supported but error
+        Bit16u                 result=0x014f;
         Bit16u            ss=get_SS();
         ModeInfoBlock     info;
         ModeInfoListItem  *cur_info;
@@ -955,7 +956,6 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
 #ifdef DEBUG
                 printf("VBE *NOT* found mode %x\n",CX);
 #endif
-                result = 0x100;
         }
         
         if (result == 0x4f)
-- 
1.7.5.4

[PATCH 5/7] vgabios: Reduce stack usage getting mode informations

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vbe.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/tools/firmware/vgabios/vbe.c b/tools/firmware/vgabios/vbe.c
index fff314e..0b8b736 100644
--- a/tools/firmware/vgabios/vbe.c
+++ b/tools/firmware/vgabios/vbe.c
@@ -914,9 +914,9 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
         // error by default is 0x014f which means supported but error
         Bit16u                 result=0x014f;
         Bit16u            ss=get_SS();
-        ModeInfoBlock     info;
         ModeInfoListItem  *cur_info;
         Boolean           using_lfb;
+        ModeInfoBlockCompact   info;
 
 #ifdef DEBUG
         printf("VBE vbe_biosfn_return_mode_information ES%x DI%x CX%x\n",ES,DI,CX);
@@ -933,7 +933,6 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
 #ifdef DEBUG
                 printf("VBE found mode %x\n",CX);
 #endif        
-                memsetb(ss, &info, 0, sizeof(ModeInfoBlock));
                 memcpyb(ss, &info, 0xc000, &(cur_info->info), sizeof(ModeInfoBlockCompact));
                 if (using_lfb) {
                   info.NumberOfBanks = 1;
@@ -950,6 +949,10 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
                 info.PhysBasePtr |= inw(VBE_DISPI_IOPORT_DATA);
 #endif 							
                 result = 0x4f;
+
+                // copy updates in mode_info_block back
+                memsetb(ES, DI, 0, sizeof(ModeInfoBlock));
+                memcpyb(ES, DI, ss, &info, sizeof(info));
         }
         else
         {
@@ -957,12 +960,6 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
                 printf("VBE *NOT* found mode %x\n",CX);
 #endif
         }
-        
-        if (result == 0x4f)
-        {
-                // copy updates in mode_info_block back
-                memcpyb(ES, DI, ss, &info, sizeof(info));
-        }
 
         write_word(ss, AX, result);
 }
-- 
1.7.5.4

[PATCH 6/7] vgabios: Check if mode is currently supported as vesa specifications

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vbe.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/tools/firmware/vgabios/vbe.c b/tools/firmware/vgabios/vbe.c
index 0b8b736..a7b06b9 100644
--- a/tools/firmware/vgabios/vbe.c
+++ b/tools/firmware/vgabios/vbe.c
@@ -930,10 +930,22 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
 
         if (cur_info != 0)
         {
+                Bit16u max_bpp = dispi_get_max_bpp();
+                Bit16u size_64k;
+                Bit16u totalMemory;
+
+                outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_VIDEO_MEMORY_64K);
+                totalMemory = inw(VBE_DISPI_IOPORT_DATA);
 #ifdef DEBUG
                 printf("VBE found mode %x\n",CX);
 #endif        
                 memcpyb(ss, &info, 0xc000, &(cur_info->info), sizeof(ModeInfoBlockCompact));
+                size_64k = size64(info.XResolution, info.YResolution, info.BitsPerPixel);
+                if ((info.XResolution > dispi_get_max_xres()) ||
+                    (info.BitsPerPixel > max_bpp) ||
+                    (size_64k > totalMemory))
+                  info.ModeAttributes &= ~VBE_MODE_ATTRIBUTE_SUPPORTED;
+
                 if (using_lfb) {
                   info.NumberOfBanks = 1;
                 }
-- 
1.7.5.4

[PATCH 7/7] vgabios: Make Windows 8 support greater resolutions

[Frediano Ziglio]

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
---
 tools/firmware/vgabios/vbe.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/firmware/vgabios/vbe.c b/tools/firmware/vgabios/vbe.c
index a7b06b9..9131721 100644
--- a/tools/firmware/vgabios/vbe.c
+++ b/tools/firmware/vgabios/vbe.c
@@ -946,9 +946,9 @@ Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
                     (size_64k > totalMemory))
                   info.ModeAttributes &= ~VBE_MODE_ATTRIBUTE_SUPPORTED;
 
-                if (using_lfb) {
-                  info.NumberOfBanks = 1;
-                }
+                /* Windows 8 require this to be 1! */
+                info.NumberOfBanks = 1;
+
                 if (info.WinAAttributes & VBE_WINDOW_ATTRIBUTE_RELOCATABLE) {
                   info.WinFuncPtr = 0xC0000000UL;
                   *(Bit16u *)&(info.WinFuncPtr) = (Bit16u)(dispi_set_bank_farcall);
-- 
1.7.5.4