xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Ian Campbell <ian.campbell@citrix.com>
To: xen-devel@lists.xen.org
Cc: Ian Campbell <ian.campbell@citrix.com>
Subject: [PATCH 06/38] arm: enable interrupts while handling traps
Date: Fri, 1 Jun 2012 15:39:35 +0000	[thread overview]
Message-ID: <1338565207-2888-6-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1338565207-2888-1-git-send-email-ian.campbell@citrix.com>

For most traps we can do this as soon as we have saved the necessary state.
For IRQs and FIQs we must wait until we have acked the interrupt with the GIC.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
 xen/arch/arm/entry.S |   17 ++++++++++++++---
 xen/arch/arm/gic.c   |    2 ++
 xen/arch/arm/traps.c |    1 -
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/xen/arch/arm/entry.S b/xen/arch/arm/entry.S
index 7a22e2d..5bc3906 100644
--- a/xen/arch/arm/entry.S
+++ b/xen/arch/arm/entry.S
@@ -46,6 +46,17 @@ save_guest_regs:
 	ALIGN;												\
 trap_##trap:												\
 	SAVE_ALL;											\
+	cpsie i; 	/* local_irq_enable */								\
+	adr lr, return_from_trap;									\
+	mov r0, sp;											\
+	mov r11, sp;											\
+	bic sp, #7; /* Align the stack pointer (noop on guest trap) */					\
+	b do_trap_##trap
+
+#define DEFINE_TRAP_ENTRY_NOIRQ(trap)									\
+	ALIGN;												\
+trap_##trap:												\
+	SAVE_ALL;											\
 	adr lr, return_from_trap;									\
 	mov r0, sp;											\
 	mov r11, sp;											\
@@ -69,8 +80,8 @@ DEFINE_TRAP_ENTRY(supervisor_call)
 DEFINE_TRAP_ENTRY(prefetch_abort)
 DEFINE_TRAP_ENTRY(data_abort)
 DEFINE_TRAP_ENTRY(hypervisor)
-DEFINE_TRAP_ENTRY(irq)
-DEFINE_TRAP_ENTRY(fiq)
+DEFINE_TRAP_ENTRY_NOIRQ(irq)
+DEFINE_TRAP_ENTRY_NOIRQ(fiq)
 
 return_from_trap:
 	mov sp, r11
@@ -83,7 +94,7 @@ ENTRY(return_to_new_vcpu)
 ENTRY(return_to_guest)
 	mov r11, sp
 	bic sp, #7 /* Align the stack pointer */
-	bl leave_hypervisor_tail
+	bl leave_hypervisor_tail /* Disables interrupts on return */
 	mov sp, r11
 	RESTORE_ONE_BANKED(SP_usr)
 	/* LR_usr is the same physical register as lr and is restored below */
diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index cc9d37b..1a2b95f 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -509,6 +509,8 @@ void gic_interrupt(struct cpu_user_regs *regs, int is_fiq)
     uint32_t intack = GICC[GICC_IAR];
     unsigned int irq = intack & GICC_IA_IRQ;
 
+    local_irq_enable();
+
     if ( irq == 1023 )
         /* Spurious interrupt */
         return;
diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
index abc26a3..5ed754f 100644
--- a/xen/arch/arm/traps.c
+++ b/xen/arch/arm/traps.c
@@ -412,7 +412,6 @@ static void do_debug_trap(struct cpu_user_regs *regs, unsigned int code)
 static void do_trap_hypercall(struct cpu_user_regs *regs, unsigned long iss)
 {
     arm_hypercall_t *call = NULL;
-    local_irq_enable();
 
     if ( iss != XEN_HYPERCALL_TAG )
     {
-- 
1.7.9.1

  parent reply	other threads:[~2012-06-01 15:39 UTC|newest]

Thread overview: 136+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-01 15:38 [PATCH 0/38] arm: boot a dom1 to "Calibrating delay loop" then hang Ian Campbell
2012-06-01 15:39 ` [PATCH 01/38] arm: allocate top level p2m page for all non-idle domains Ian Campbell
2012-06-01 15:39   ` [PATCH 02/38] arm: handy function to print a walk of the hypervisor page tables Ian Campbell
2012-06-07  8:45     ` Tim Deegan
2012-06-07 11:57       ` Ian Campbell
2012-06-07 12:39         ` Tim Deegan
2012-06-01 15:39   ` [PATCH 03/38] arm: handy function to print a walk of a domain's p2m Ian Campbell
2012-06-07  8:49     ` Tim Deegan
2012-06-07 12:26       ` Ian Campbell
2012-06-07 12:40         ` Tim Deegan
2012-06-07 13:54           ` Ian Campbell
2012-06-07 16:34             ` Ian Campbell
2012-06-07 16:39               ` Ian Campbell
2012-06-07 19:10               ` Tim Deegan
2012-06-01 15:39   ` [PATCH 04/38] arm: correct and expand TLB flush CP15 registers Ian Campbell
2012-06-06 12:45     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 05/38] arm: restore stack on return from trap Ian Campbell
2012-06-06 13:03     ` Stefano Stabellini
2012-06-01 15:39   ` Ian Campbell [this message]
2012-06-06 13:38     ` [PATCH 06/38] arm: enable interrupts while handling traps Stefano Stabellini
2012-06-01 15:39   ` [PATCH 07/38] arm: hook up domctl and memory_op Ian Campbell
2012-06-06 13:39     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 08/38] arm: allocate and setup a guest vcpu Ian Campbell
2012-06-06 13:46     ` Stefano Stabellini
2012-06-06 13:55       ` Ian Campbell
2012-06-07  9:40         ` Ian Campbell
2012-06-07 17:02           ` Ian Campbell
2012-06-08 10:00             ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 09/38] arm: print domid as part of debug trap Ian Campbell
2012-06-06 13:47     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 10/38] arm: remove unnecessarily verbose print from p2m_load_VTTBR Ian Campbell
2012-06-06 13:47     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 11/38] arm: implement p2m lookup Ian Campbell
2012-06-06 14:01     ` Stefano Stabellini
2012-06-06 14:30       ` Ian Campbell
2012-06-13 13:40         ` Ian Campbell
2012-06-07  9:03     ` Tim Deegan
2012-06-13 15:13       ` Ian Campbell
2012-06-14  8:47         ` Tim Deegan
2012-06-19  9:43           ` Ian Campbell
2012-06-01 15:39   ` [PATCH 12/38] arm: remove hard tabs from init_idle_domain Ian Campbell
2012-06-06 15:13     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 13/38] arm: stub out sync_vcpu_execstate Ian Campbell
2012-06-06 15:15     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 14/38] arm: do not set max_vcpus = 8 in arch_domain_create Ian Campbell
2012-06-06 15:26     ` Stefano Stabellini
2012-06-06 15:29       ` Ian Campbell
2012-06-07 16:57       ` Ian Campbell
2012-06-07 16:59         ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 15/38] arm: implement stub version of flush_tlb_mask Ian Campbell
2012-06-06 15:27     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 16/38] arm: Add simple cpu_{sibling,core}_mask Ian Campbell
2012-06-06 16:13     ` [PATCH 16/38] arm: Add simple cpu_{sibling, core}_mask Stefano Stabellini
2012-06-07  9:08     ` Tim Deegan
2012-06-07 11:35       ` Ian Campbell
2012-06-07 11:42         ` Tim Deegan
2012-06-13 15:18         ` Ian Campbell
2012-06-01 15:39   ` [PATCH 17/38] arm: allow p2m to be created with specific MATTR Ian Campbell
2012-06-06 16:27     ` Stefano Stabellini
2012-06-13 15:33       ` Ian Campbell
2012-06-01 15:39   ` [PATCH 18/38] arm: implement vpl011 (UART) emulator Ian Campbell
2012-06-06 16:57     ` Stefano Stabellini
2012-06-07  9:29     ` Tim Deegan
2012-06-07  9:34       ` Ian Campbell
2012-06-07 10:18         ` Tim Deegan
2012-06-20 13:37           ` Ian Campbell
2012-06-01 15:39   ` [PATCH 19/38] arm: context switch a bunch of guest state Ian Campbell
2012-06-05 17:11     ` Stefano Stabellini
2012-06-06 15:19       ` Ian Campbell
2012-06-06 15:20         ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 20/38] arm: dump a page table walk when va_to_par fails Ian Campbell
2012-06-07  9:32     ` Tim Deegan
2012-06-01 15:39   ` [PATCH 21/38] arm: dump guest s1 walk on data abort which is not a stage 2 issue Ian Campbell
2012-06-07  9:41     ` Tim Deegan
2012-06-20 13:48       ` Ian Campbell
2012-06-01 15:39   ` [PATCH 22/38] arm: implement vcpu_show_execution_state Ian Campbell
2012-06-06 17:26     ` Stefano Stabellini
2012-06-20 13:53       ` Ian Campbell
2012-06-20 13:56         ` Ian Campbell
2012-06-01 15:39   ` [PATCH 23/38] arm: use correct attributes for mappings in copy_from_paddr() Ian Campbell
2012-06-01 16:20     ` David Vrabel
2012-06-06 17:38     ` Stefano Stabellini
2012-06-20 15:38       ` Ian Campbell
2012-06-01 15:39   ` [PATCH 24/38] arm: map fixmaps non-executable Ian Campbell
2012-06-06 17:40     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 25/38] arm: remove old identity map of boot paddr when we are done with it Ian Campbell
2012-06-06 18:04     ` Stefano Stabellini
2012-06-06 18:18       ` Tim Deegan
2012-06-21  8:15         ` Ian Campbell
2012-06-21  9:26           ` Ian Campbell
2012-06-01 15:39   ` [PATCH 26/38] arm: fix locking in create_p2m_entries Ian Campbell
2012-06-07  9:48     ` Tim Deegan
2012-06-07 10:26     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 27/38] arm: split pending SPIs (global) out from pending PPIs and SGIs (per CPU) Ian Campbell
2012-06-07 10:35     ` Stefano Stabellini
2012-06-26  9:03       ` Ian Campbell
2012-06-01 15:39   ` [PATCH 28/38] arm: map GICV in all domains, not just dom0 Ian Campbell
2012-06-07  9:51     ` Tim Deegan
2012-06-26  9:25       ` Ian Campbell
2012-06-07 10:39     ` Stefano Stabellini
2012-06-26 10:18     ` Ian Campbell
2012-06-01 15:39   ` [PATCH 29/38] arm: delay enabling data-cache until paging enabled Ian Campbell
2012-06-01 17:05     ` Tim Deegan
2012-06-01 19:04       ` Ian Campbell
2012-06-07 13:59         ` Tim Deegan
2012-06-26  9:30           ` Ian Campbell
2012-06-07 10:41     ` Stefano Stabellini
2012-06-01 15:39   ` [PATCH 30/38] arm: Upgrade guest barriers to Outer-Shareable. Enable Protected Table Walk Ian Campbell
2012-06-07 10:20     ` Tim Deegan
2012-06-01 15:40   ` [PATCH 31/38] arm: gic.lock can be taken in interrupt context, so lock appropriately Ian Campbell
2012-06-07 10:20     ` Tim Deegan
2012-06-07 10:49     ` Stefano Stabellini
2012-06-26  9:35       ` Ian Campbell
2012-06-26 11:41         ` Stefano Stabellini
2012-06-26 12:25           ` Ian Campbell
2012-06-26 13:45             ` Ian Campbell
2012-06-01 15:40   ` [PATCH 32/38] arm: context switch virtual timer registers Ian Campbell
2012-06-07 10:21     ` Tim Deegan
2012-06-01 15:40   ` [PATCH 33/38] arm: the hyp timer seems to work now, default to using it Ian Campbell
2012-06-07 10:22     ` Tim Deegan
2012-06-01 15:40   ` [PATCH 34/38] HACK: arm: initial XENMAPSPACE_gmfn_foreign Ian Campbell
2012-06-07 10:56     ` Stefano Stabellini
2012-06-01 15:40   ` [PATCH 35/38] arm: move PSR flag definitions into interface, for tools use Ian Campbell
2012-06-07 10:23     ` Tim Deegan
2012-06-01 15:40   ` [PATCH 36/38] libxc: add ARM support to xc_dom (PV domain building) Ian Campbell
2012-06-07 11:38     ` Stefano Stabellini
2012-07-23 13:57       ` Ian Campbell
2012-07-23 14:11         ` Ian Campbell
2012-07-23 14:37           ` David Vrabel
2012-07-23 14:47             ` Ian Campbell
2012-06-01 15:40   ` [PATCH 37/38] HACK: add simple xcbuild Ian Campbell
2012-06-07 11:42     ` Stefano Stabellini
2012-06-07 12:06       ` Ian Campbell
2012-06-01 15:40   ` [PATCH 38/38] HACK: arm: disable hypercall continuations Ian Campbell
2012-06-07 11:00     ` Stefano Stabellini
2012-06-01 16:46 ` [PATCH 0/38] arm: boot a dom1 to "Calibrating delay loop" then hang Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1338565207-2888-6-git-send-email-ian.campbell@citrix.com \
    --to=ian.campbell@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).