xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Ian Campbell <ian.campbell@citrix.com>
To: xen-devel@lists.xen.org
Cc: Ian Campbell <ian.campbell@citrix.com>
Subject: [PATCH V2 15/40] arm: Add simple cpu_{sibling, core}_mask
Date: Tue, 26 Jun 2012 10:29:39 +0000	[thread overview]
Message-ID: <1340706604-1313-15-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1340706604-1313-1-git-send-email-ian.campbell@citrix.com>

This needs to be done for all cpus. The allocations require smp_prepare_cpus
to be called a bit later on.

In a previous version of this patch these maps were being zeroed (instead of
setting the CPU itself in them). This in turn causes cpumask_first to return
NR_CPUS, which in turn was causing default_vcpu0_location to misbehave and
read off the end of its cnt array.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
---
 xen/arch/arm/dummy.S   |    2 --
 xen/arch/arm/setup.c   |    4 ++--
 xen/arch/arm/smpboot.c |   21 +++++++++++++++++++++
 3 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/xen/arch/arm/dummy.S b/xen/arch/arm/dummy.S
index c001e8d..03f7489 100644
--- a/xen/arch/arm/dummy.S
+++ b/xen/arch/arm/dummy.S
@@ -7,8 +7,6 @@ x:	.word 0xe7f000f0 /* Undefined instruction */
 x:	mov pc, lr
 	
 /* SMP support */
-DUMMY(per_cpu__cpu_core_mask);
-DUMMY(per_cpu__cpu_sibling_mask);
 DUMMY(node_online_map);
 DUMMY(smp_send_state_dump);
 
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 81ababb..d6c0178 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -173,8 +173,6 @@ void __init start_xen(unsigned long boot_phys_offset,
     set_current((struct vcpu *)0xfffff000); /* debug sanity */
     idle_vcpu[0] = current;
 
-    smp_prepare_cpus(cpus);
-
     init_xen_time();
 
     setup_mm(atag_paddr, fdt_size);
@@ -214,6 +212,8 @@ void __init start_xen(unsigned long boot_phys_offset,
 
     local_irq_enable();
 
+    smp_prepare_cpus(cpus);
+
     initialize_keytable();
 
     console_init_postirq();
diff --git a/xen/arch/arm/smpboot.c b/xen/arch/arm/smpboot.c
index ea05afc..6463a8d 100644
--- a/xen/arch/arm/smpboot.c
+++ b/xen/arch/arm/smpboot.c
@@ -52,6 +52,23 @@ unsigned long __initdata ready_cpus = 0;
 
 /* ID of the PCPU we're running on */
 DEFINE_PER_CPU(unsigned int, cpu_id);
+/* XXX these seem awfully x86ish... */
+/* representing HT siblings of each logical CPU */
+DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_mask);
+/* representing HT and core siblings of each logical CPU */
+DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_core_mask);
+
+static void setup_cpu_sibling_map(int cpu)
+{
+    if ( !zalloc_cpumask_var(&per_cpu(cpu_sibling_mask, cpu)) ||
+         !zalloc_cpumask_var(&per_cpu(cpu_core_mask, cpu)) )
+        panic("No memory for CPU sibling/core maps\n");
+
+    /* A CPU is a sibling with itself and is always on its own core. */
+    cpumask_set_cpu(cpu, per_cpu(cpu_sibling_mask, cpu));
+    cpumask_set_cpu(cpu, per_cpu(cpu_core_mask, cpu));
+}
+
 
 void __init
 smp_prepare_cpus (unsigned int max_cpus)
@@ -65,6 +82,8 @@ smp_prepare_cpus (unsigned int max_cpus)
     for ( i = 0; i < max_cpus; i++ )
         cpumask_set_cpu(i, &cpu_possible_map);
     cpumask_copy(&cpu_present_map, &cpu_possible_map);
+
+    setup_cpu_sibling_map(0);
 }
 
 void __init
@@ -115,6 +134,8 @@ void __cpuinit start_secondary(unsigned long boot_phys_offset,
 
     set_current(idle_vcpu[cpuid]);
 
+    setup_cpu_sibling_map(cpuid);
+
     /* Run local notifiers */
     notify_cpu_starting(cpuid);
     wmb();
-- 
1.7.9.1

  parent reply	other threads:[~2012-06-26 10:29 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-26 10:29 [PATCH 00/40 V2] arm: boot a dom1 to "Calibrating delay loop" then hang Ian Campbell
2012-06-26 10:29 ` [PATCH V2 01/40] arm: allocate top level p2m page for all non-idle domains Ian Campbell
2012-06-26 10:29   ` [PATCH V2 02/40] arm: handy function to print a walk of a page table Ian Campbell
2012-06-26 10:29   ` [PATCH V2 03/40] arm: correct and expand TLB flush CP15 registers Ian Campbell
2012-06-26 10:29   ` [PATCH V2 04/40] arm: restore stack on return from trap Ian Campbell
2012-06-26 10:29   ` [PATCH V2 05/40] arm: enable interrupts while handling traps Ian Campbell
2012-06-26 10:29   ` [PATCH V2 06/40] arm: hook up domctl and memory_op Ian Campbell
2012-06-26 10:29   ` [PATCH V2 07/40] arm: allocate and setup a guest vcpu Ian Campbell
2012-06-26 10:29   ` [PATCH V2 08/40] arm: print domid as part of debug trap Ian Campbell
2012-06-26 10:29   ` [PATCH V2 09/40] arm: remove unnecessarily verbose print from p2m_load_VTTBR Ian Campbell
2012-06-26 10:29   ` [PATCH V2 10/40] arm: implement p2m lookup Ian Campbell
2012-06-26 10:29   ` [PATCH V2 11/40] arm: remove hard tabs from init_idle_domain Ian Campbell
2012-06-26 10:29   ` [PATCH V2 12/40] arm: stub out sync_vcpu_execstate Ian Campbell
2012-06-26 10:29   ` [PATCH V2 13/40] arm: implement stub version of flush_tlb_mask Ian Campbell
2012-06-26 10:29   ` [PATCH V2 14/40] arm: do not set max_vcpus = 8 in arch_domain_create Ian Campbell
2012-06-26 10:29   ` Ian Campbell [this message]
2012-06-26 10:29   ` [PATCH V2 16/40] arm: allow p2m to be created with specific MATTR Ian Campbell
2012-06-28 12:46     ` Ian Campbell
2012-06-28 13:00     ` Stefano Stabellini
2012-06-26 10:29   ` [PATCH V2 17/40] arm: implement vpl011 (UART) emulator Ian Campbell
2012-06-28 11:00     ` Tim Deegan
2012-06-26 10:29   ` [PATCH V2 18/40] arm: context switch a bunch of guest state Ian Campbell
2012-06-26 10:29   ` [PATCH V2 19/40] arm: dump a page table walk when va_to_par fails Ian Campbell
2012-06-26 10:29   ` [PATCH V2 20/40] arm: dump guest s1 walk on data abort which is not a stage 2 issue Ian Campbell
2012-06-26 10:29   ` [PATCH V2 21/40] arm: implement vcpu_show_execution_state Ian Campbell
2012-06-28 13:04     ` Stefano Stabellini
2012-06-26 10:29   ` [PATCH V2 22/40] arm: use correct attributes for mappings in copy_from_paddr() Ian Campbell
2012-06-26 10:29   ` [PATCH V2 23/40] arm: map fixmaps non-executable Ian Campbell
2012-06-26 10:29   ` [PATCH V2 24/40] arm: fix locking in create_p2m_entries Ian Campbell
2012-06-26 10:29   ` [PATCH V2 25/40] arm: split pending SPIs (global) out from pending PPIs and SGIs (per CPU) Ian Campbell
2012-06-28 13:08     ` Stefano Stabellini
2012-06-26 10:29   ` [PATCH V2 26/40] arm: use interrupt safe spin locks in vgic_vcpu_inject_irq Ian Campbell
2012-06-28 13:06     ` Stefano Stabellini
2012-06-26 10:29   ` [PATCH V2 27/40] arm: map GICV in all domains, not just dom0 Ian Campbell
2012-06-26 10:29   ` [PATCH V2 28/40] arm: enable data-cache at the same time as enabling the MMU, not before Ian Campbell
2012-06-28 11:02     ` Tim Deegan
2012-06-26 10:29   ` [PATCH V2 29/40] arm: Upgrade guest barriers to Outer-Shareable. Enable Protected Table Walk Ian Campbell
2012-06-26 10:29   ` [PATCH V2 30/40] arm: gic.lock can be taken in interrupt context, so lock appropriately Ian Campbell
2012-06-26 10:29   ` [PATCH V2 31/40] arm: context switch virtual timer registers Ian Campbell
2012-06-26 10:29   ` [PATCH V2 32/40] arm: the hyp timer seems to work in newer model versions, default to using it Ian Campbell
2012-06-26 10:29   ` [PATCH V2 33/40] arm: unwind allocations etc on arch_domain_create_failure Ian Campbell
2012-06-28 11:05     ` Tim Deegan
2012-06-26 10:29   ` [PATCH V2 34/40] HACK: arm: initial XENMAPSPACE_gmfn_foreign Ian Campbell
2012-06-26 10:29   ` [PATCH V2 35/40] arm: move PSR flag definitions into interface, for tools use Ian Campbell
2012-06-26 10:30   ` [PATCH V2 36/40] libxc: add ARM support to xc_dom (PV domain building) Ian Campbell
2012-06-26 10:30   ` [PATCH V2 37/40] arm: implement VGCF_online Ian Campbell
2012-06-28 11:06     ` Tim Deegan
2012-06-26 10:30   ` [PATCH V2 38/40] arm: fix typo s/approprately/appropriately/g Ian Campbell
2012-06-26 10:30   ` [PATCH V2 39/40] HACK: add simple xcbuild Ian Campbell
2012-06-26 10:30   ` [PATCH V2 40/40] HACK: arm: disable hypercall continuations Ian Campbell
2012-06-26 15:26 ` [PATCH 00/40 V2] arm: boot a dom1 to "Calibrating delay loop" then hang Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1340706604-1313-15-git-send-email-ian.campbell@citrix.com \
    --to=ian.campbell@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).