From: Ian Campbell <ian.campbell@citrix.com>
To: xen-devel@lists.xen.org
Cc: Ian Campbell <ian.campbell@citrix.com>
Subject: [PATCH V2 07/40] arm: allocate and setup a guest vcpu.
Date: Tue, 26 Jun 2012 10:29:31 +0000 [thread overview]
Message-ID: <1340706604-1313-7-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1340706604-1313-1-git-send-email-ian.campbell@citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
xen/arch/arm/domain.c | 67 +++++++++++++++++++++++++++++++++++++++++
xen/arch/arm/dummy.S | 3 --
xen/include/public/arch-arm.h | 9 -----
3 files changed, 67 insertions(+), 12 deletions(-)
diff --git a/xen/arch/arm/domain.c b/xen/arch/arm/domain.c
index 9339a11..b099d91 100644
--- a/xen/arch/arm/domain.c
+++ b/xen/arch/arm/domain.c
@@ -144,6 +144,17 @@ void free_vcpu_struct(struct vcpu *v)
free_xenheap_page(v);
}
+struct vcpu_guest_context *alloc_vcpu_guest_context(void)
+{
+ return xmalloc(struct vcpu_guest_context);
+
+}
+
+void free_vcpu_guest_context(struct vcpu_guest_context *vgc)
+{
+ xfree(vgc);
+}
+
int vcpu_initialise(struct vcpu *v)
{
int rc = 0;
@@ -212,6 +223,62 @@ void arch_domain_destroy(struct domain *d)
/* domain_vgic_destroy */
}
+static int is_guest_psr(uint32_t psr)
+{
+ switch (psr & PSR_MODE_MASK)
+ {
+ case PSR_MODE_USR:
+ case PSR_MODE_FIQ:
+ case PSR_MODE_IRQ:
+ case PSR_MODE_SVC:
+ case PSR_MODE_ABT:
+ case PSR_MODE_UND:
+ case PSR_MODE_SYS:
+ return 1;
+ case PSR_MODE_MON:
+ case PSR_MODE_HYP:
+ default:
+ return 0;
+ }
+}
+
+/*
+ * Initialise VCPU state. The context can be supplied by either the
+ * toolstack (XEN_DOMCTL_setvcpucontext) or the guest
+ * (VCPUOP_initialise) and therefore must be properly validated.
+ */
+int arch_set_info_guest(
+ struct vcpu *v, vcpu_guest_context_u c)
+{
+ struct cpu_user_regs *regs = &c.nat->user_regs;
+
+ if ( !is_guest_psr(regs->cpsr) )
+ return -EINVAL;
+
+ if ( regs->spsr_svc && !is_guest_psr(regs->spsr_svc) )
+ return -EINVAL;
+ if ( regs->spsr_abt && !is_guest_psr(regs->spsr_abt) )
+ return -EINVAL;
+ if ( regs->spsr_und && !is_guest_psr(regs->spsr_und) )
+ return -EINVAL;
+ if ( regs->spsr_irq && !is_guest_psr(regs->spsr_irq) )
+ return -EINVAL;
+ if ( regs->spsr_fiq && !is_guest_psr(regs->spsr_fiq) )
+ return -EINVAL;
+
+ v->arch.cpu_info->guest_cpu_user_regs = *regs;
+
+ /* XXX other state:
+ * - SCTLR
+ * - TTBR0/1
+ * - TTBCR
+ */
+
+ clear_bit(_VPF_down, &v->pause_flags);
+
+ return 0;
+}
+
void arch_dump_domain_info(struct domain *d)
{
}
diff --git a/xen/arch/arm/dummy.S b/xen/arch/arm/dummy.S
index 016340c..3b48917 100644
--- a/xen/arch/arm/dummy.S
+++ b/xen/arch/arm/dummy.S
@@ -20,11 +20,8 @@ DUMMY(pirq_guest_unbind);
DUMMY(pirq_set_affinity);
/* VCPU */
-DUMMY(alloc_vcpu_guest_context);
DUMMY(arch_get_info_guest);
-DUMMY(arch_set_info_guest);
DUMMY(arch_vcpu_reset);
-DUMMY(free_vcpu_guest_context);
DUMMY(sync_vcpu_execstate);
NOP(update_vcpu_system_time);
DUMMY(vcpu_show_execution_state);
diff --git a/xen/include/public/arch-arm.h b/xen/include/public/arch-arm.h
index 1b1bcf3..e439727 100644
--- a/xen/include/public/arch-arm.h
+++ b/xen/include/public/arch-arm.h
@@ -124,15 +124,6 @@ typedef uint32_t xen_ulong_t;
struct vcpu_guest_context {
struct cpu_user_regs user_regs; /* User-level CPU registers */
- union {
- uint32_t reg[16];
- struct {
- uint32_t __pad[12];
- uint32_t sp; /* r13 */
- uint32_t lr; /* r14 */
- uint32_t pc; /* r15 */
- };
- };
};
typedef struct vcpu_guest_context vcpu_guest_context_t;
DEFINE_XEN_GUEST_HANDLE(vcpu_guest_context_t);
--
1.7.9.1
next prev parent reply other threads:[~2012-06-26 10:29 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-26 10:29 [PATCH 00/40 V2] arm: boot a dom1 to "Calibrating delay loop" then hang Ian Campbell
2012-06-26 10:29 ` [PATCH V2 01/40] arm: allocate top level p2m page for all non-idle domains Ian Campbell
2012-06-26 10:29 ` [PATCH V2 02/40] arm: handy function to print a walk of a page table Ian Campbell
2012-06-26 10:29 ` [PATCH V2 03/40] arm: correct and expand TLB flush CP15 registers Ian Campbell
2012-06-26 10:29 ` [PATCH V2 04/40] arm: restore stack on return from trap Ian Campbell
2012-06-26 10:29 ` [PATCH V2 05/40] arm: enable interrupts while handling traps Ian Campbell
2012-06-26 10:29 ` [PATCH V2 06/40] arm: hook up domctl and memory_op Ian Campbell
2012-06-26 10:29 ` Ian Campbell [this message]
2012-06-26 10:29 ` [PATCH V2 08/40] arm: print domid as part of debug trap Ian Campbell
2012-06-26 10:29 ` [PATCH V2 09/40] arm: remove unnecessarily verbose print from p2m_load_VTTBR Ian Campbell
2012-06-26 10:29 ` [PATCH V2 10/40] arm: implement p2m lookup Ian Campbell
2012-06-26 10:29 ` [PATCH V2 11/40] arm: remove hard tabs from init_idle_domain Ian Campbell
2012-06-26 10:29 ` [PATCH V2 12/40] arm: stub out sync_vcpu_execstate Ian Campbell
2012-06-26 10:29 ` [PATCH V2 13/40] arm: implement stub version of flush_tlb_mask Ian Campbell
2012-06-26 10:29 ` [PATCH V2 14/40] arm: do not set max_vcpus = 8 in arch_domain_create Ian Campbell
2012-06-26 10:29 ` [PATCH V2 15/40] arm: Add simple cpu_{sibling, core}_mask Ian Campbell
2012-06-26 10:29 ` [PATCH V2 16/40] arm: allow p2m to be created with specific MATTR Ian Campbell
2012-06-28 12:46 ` Ian Campbell
2012-06-28 13:00 ` Stefano Stabellini
2012-06-26 10:29 ` [PATCH V2 17/40] arm: implement vpl011 (UART) emulator Ian Campbell
2012-06-28 11:00 ` Tim Deegan
2012-06-26 10:29 ` [PATCH V2 18/40] arm: context switch a bunch of guest state Ian Campbell
2012-06-26 10:29 ` [PATCH V2 19/40] arm: dump a page table walk when va_to_par fails Ian Campbell
2012-06-26 10:29 ` [PATCH V2 20/40] arm: dump guest s1 walk on data abort which is not a stage 2 issue Ian Campbell
2012-06-26 10:29 ` [PATCH V2 21/40] arm: implement vcpu_show_execution_state Ian Campbell
2012-06-28 13:04 ` Stefano Stabellini
2012-06-26 10:29 ` [PATCH V2 22/40] arm: use correct attributes for mappings in copy_from_paddr() Ian Campbell
2012-06-26 10:29 ` [PATCH V2 23/40] arm: map fixmaps non-executable Ian Campbell
2012-06-26 10:29 ` [PATCH V2 24/40] arm: fix locking in create_p2m_entries Ian Campbell
2012-06-26 10:29 ` [PATCH V2 25/40] arm: split pending SPIs (global) out from pending PPIs and SGIs (per CPU) Ian Campbell
2012-06-28 13:08 ` Stefano Stabellini
2012-06-26 10:29 ` [PATCH V2 26/40] arm: use interrupt safe spin locks in vgic_vcpu_inject_irq Ian Campbell
2012-06-28 13:06 ` Stefano Stabellini
2012-06-26 10:29 ` [PATCH V2 27/40] arm: map GICV in all domains, not just dom0 Ian Campbell
2012-06-26 10:29 ` [PATCH V2 28/40] arm: enable data-cache at the same time as enabling the MMU, not before Ian Campbell
2012-06-28 11:02 ` Tim Deegan
2012-06-26 10:29 ` [PATCH V2 29/40] arm: Upgrade guest barriers to Outer-Shareable. Enable Protected Table Walk Ian Campbell
2012-06-26 10:29 ` [PATCH V2 30/40] arm: gic.lock can be taken in interrupt context, so lock appropriately Ian Campbell
2012-06-26 10:29 ` [PATCH V2 31/40] arm: context switch virtual timer registers Ian Campbell
2012-06-26 10:29 ` [PATCH V2 32/40] arm: the hyp timer seems to work in newer model versions, default to using it Ian Campbell
2012-06-26 10:29 ` [PATCH V2 33/40] arm: unwind allocations etc on arch_domain_create_failure Ian Campbell
2012-06-28 11:05 ` Tim Deegan
2012-06-26 10:29 ` [PATCH V2 34/40] HACK: arm: initial XENMAPSPACE_gmfn_foreign Ian Campbell
2012-06-26 10:29 ` [PATCH V2 35/40] arm: move PSR flag definitions into interface, for tools use Ian Campbell
2012-06-26 10:30 ` [PATCH V2 36/40] libxc: add ARM support to xc_dom (PV domain building) Ian Campbell
2012-06-26 10:30 ` [PATCH V2 37/40] arm: implement VGCF_online Ian Campbell
2012-06-28 11:06 ` Tim Deegan
2012-06-26 10:30 ` [PATCH V2 38/40] arm: fix typo s/approprately/appropriately/g Ian Campbell
2012-06-26 10:30 ` [PATCH V2 39/40] HACK: add simple xcbuild Ian Campbell
2012-06-26 10:30 ` [PATCH V2 40/40] HACK: arm: disable hypercall continuations Ian Campbell
2012-06-26 15:26 ` [PATCH 00/40 V2] arm: boot a dom1 to "Calibrating delay loop" then hang Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340706604-1313-7-git-send-email-ian.campbell@citrix.com \
--to=ian.campbell@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).