* [PATCH v2 0/3] xl: empty disk devices
@ 2012-07-25 16:08 Ian Jackson
2012-07-25 16:08 ` [PATCH 1/3] xl: support empty CDROM devices Ian Jackson
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Ian Jackson @ 2012-07-25 16:08 UTC (permalink / raw)
To: xen-devel
This now includes Ian Campbell's original fix, and seems to work
(well, pass the tests) for me.
1/3 xl: support empty CDROM devices
2/3 xl: disk parsing preparation for empty cdrom devices
3/3 xl: support xend empty cdrom device syntax
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/3] xl: support empty CDROM devices
2012-07-25 16:08 [PATCH v2 0/3] xl: empty disk devices Ian Jackson
@ 2012-07-25 16:08 ` Ian Jackson
2012-07-25 16:08 ` [PATCH 2/3] xl: disk parsing preparation for empty cdrom devices Ian Jackson
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Ian Jackson @ 2012-07-25 16:08 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Jackson, Ian Campbell
From: Ian Campbell <ian.campbell@citrix.com>
The important change here is to xlu_disk_parse to correctly set format == EMPTY
for CDROM devices which are empty. Test cases are added which check for
correctness here.
xend accepts ',hdc:cdrom,r'[0] as an empty CDROM drive however this is not
consistent with the xl syntax in docs/misc/xl-disk-configuration.txt which
requires ',,hdc:cdrom,r' (the additional positional paramter is the format).
I'm not sure if/how this can be fixed. Note that xend does not accept
',,hdc:cdrom,r'
There are several incidental cleanups included the the cdrom-{insert,eject}
commands:
- add a dry-run mode
- use the non-deprecated disk specification syntax
- check for and report errors from libxl_cdrom_insert
[0] http://wiki.xen.org/wiki/CD_Rom_Support_in_Xen
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
-
Changes in v2:
* Add a test case for `devtype=cdrom,,,hdc'
---
docs/man/xl.pod.1 | 30 +++++++++++++++++++++---------
tools/libxl/check-xl-disk-parse | 35 +++++++++++++++++++++++++++++++++++
tools/libxl/libxlu_disk.c | 2 ++
tools/libxl/libxlu_disk_l.c | 35 ++++++++++++++---------------------
tools/libxl/libxlu_disk_l.h | 10 +---------
tools/libxl/libxlu_disk_l.l | 5 +++--
tools/libxl/xl_cmdimpl.c | 3 ++-
tools/libxl/xl_cmdtable.c | 4 ++--
8 files changed, 80 insertions(+), 44 deletions(-)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index cbd7608..25ce777 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -1037,9 +1037,12 @@ in the domain.
List virtual block devices for a domain.
-=item B<cd-insert> I<domain-id> I<VirtualDevice> I<be-dev>
+=item B<cd-insert> I<domain-id> I<VirtualDevice> I<target>
-Insert a cdrom into a guest domain's cd drive. Only works with HVM domains.
+Insert a cdrom into a guest domain's existing virtial cd drive. The
+virtual drive must already exist but can be current empty.
+
+Only works with HVM domains.
B<OPTIONS>
@@ -1047,20 +1050,29 @@ B<OPTIONS>
=item I<VirtualDevice>
-How the device should be presented to the guest domain; for example /dev/hdc.
+How the device should be presented to the guest domain; for example "hdc".
-=item I<be-dev>
+=item I<target>
-the device in the backend domain (usually domain 0) to be exported; it
-can be a path to a file (file://path/to/file.iso). See B<disk> in
-L<xl.cfg(5)> for the details.
+the target path in the backend domain (usually domain 0) to be
+exported; Can be a block device or a file etc. See B<target> in
+F<docs/misc/xl-disk-configuration.txt>.
=back
=item B<cd-eject> I<domain-id> I<VirtualDevice>
-Eject a cdrom from a guest's cd drive. Only works with HVM domains.
-I<VirtualDevice> is the cdrom device in the guest to eject.
+Eject a cdrom from a guest's virtual cd drive. Only works with HVM domains.
+
+B<OPTIONS>
+
+=over 4
+
+=item I<VirtualDevice>
+
+How the device should be presented to the guest domain; for example "hdc".
+
+=back
=back
diff --git a/tools/libxl/check-xl-disk-parse b/tools/libxl/check-xl-disk-parse
index 67805e5..7a33780 100755
--- a/tools/libxl/check-xl-disk-parse
+++ b/tools/libxl/check-xl-disk-parse
@@ -107,4 +107,39 @@ disk: {
EOF
one 0 backendtype=phy,vdev=xvdb,access=w,target=/dev/vg/guest-volume
+expected <<EOF
+disk: {
+ "backend_domid": 0,
+ "pdev_path": "",
+ "vdev": "hdc",
+ "backend": "unknown",
+ "format": "empty",
+ "script": null,
+ "removable": 1,
+ "readwrite": 0,
+ "is_cdrom": 1
+}
+
+EOF
+one 0 devtype=cdrom,,,hdc
+one 0 ,,hdc:cdrom,r
+one 0 vdev=hdc,access=r,devtype=cdrom,target=
+one 0 ,empty,hdc:cdrom,r
+
+expected <<EOF
+disk: {
+ "backend_domid": 0,
+ "pdev_path": null,
+ "vdev": "hdc",
+ "backend": "unknown",
+ "format": "empty",
+ "script": null,
+ "removable": 1,
+ "readwrite": 0,
+ "is_cdrom": 1
+}
+
+EOF
+one 0 vdev=hdc,access=r,devtype=cdrom,format=empty
+
complete
diff --git a/tools/libxl/libxlu_disk.c b/tools/libxl/libxlu_disk.c
index 3d51def..18fe386 100644
--- a/tools/libxl/libxlu_disk.c
+++ b/tools/libxl/libxlu_disk.c
@@ -76,6 +76,8 @@ int xlu_disk_parse(XLU_Config *cfg,
if (disk->is_cdrom) {
disk->removable = 1;
disk->readwrite = 0;
+ if (!disk->pdev_path || !strcmp(disk->pdev_path, ""))
+ disk->format = LIBXL_DISK_FORMAT_EMPTY;
}
if (!disk->vdev) {
diff --git a/tools/libxl/libxlu_disk_l.c b/tools/libxl/libxlu_disk_l.c
index 2f0f283..8b9f44d 100644
--- a/tools/libxl/libxlu_disk_l.c
+++ b/tools/libxl/libxlu_disk_l.c
@@ -841,11 +841,12 @@ static void setaccess(DiskParseContext *dpc, const char *str) {
/* Sets ->format from the string. IDL should provide something for this. */
static void setformat(DiskParseContext *dpc, const char *str) {
- if (!strcmp(str,"") ||
- !strcmp(str,"raw")) DSET(dpc,format,FORMAT,str,RAW);
+ if (!strcmp(str,"")) DSET(dpc,format,FORMAT,str,RAW);
+ else if (!strcmp(str,"raw")) DSET(dpc,format,FORMAT,str,RAW);
else if (!strcmp(str,"qcow")) DSET(dpc,format,FORMAT,str,QCOW);
else if (!strcmp(str,"qcow2")) DSET(dpc,format,FORMAT,str,QCOW2);
else if (!strcmp(str,"vhd")) DSET(dpc,format,FORMAT,str,VHD);
+ else if (!strcmp(str,"empty")) DSET(dpc,format,FORMAT,str,EMPTY);
else xlu__disk_err(dpc,str,"unknown value for format");
}
@@ -860,7 +861,7 @@ static void setbackendtype(DiskParseContext *dpc, const char *str) {
#define DEPRECATE(usewhatinstead) /* not currently reported */
-#line 864 "libxlu_disk_l.c"
+#line 865 "libxlu_disk_l.c"
#define INITIAL 0
#define LEXERR 1
@@ -1096,12 +1097,12 @@ YY_DECL
register int yy_act;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
-#line 126 "libxlu_disk_l.l"
+#line 127 "libxlu_disk_l.l"
/*----- the scanner rules which do the parsing -----*/
-#line 1105 "libxlu_disk_l.c"
+#line 1106 "libxlu_disk_l.c"
if ( !yyg->yy_init )
{
@@ -1295,7 +1296,7 @@ YY_RULE_SETUP
* matched the whole string, so these patterns take precedence */
case 13:
YY_RULE_SETUP
-#line 160 "libxlu_disk_l.l"
+#line 161 "libxlu_disk_l.l"
{
STRIP(':');
DPC->had_depr_prefix=1; DEPRECATE("use `[format=]...,'");
@@ -1304,7 +1305,7 @@ YY_RULE_SETUP
YY_BREAK
case 14:
YY_RULE_SETUP
-#line 166 "libxlu_disk_l.l"
+#line 167 "libxlu_disk_l.l"
{
STRIP(':');
DPC->had_depr_prefix=1; DEPRECATE("use `script=...'");
@@ -1329,7 +1330,7 @@ case 17:
yyg->yy_c_buf_p = yy_cp = yy_bp + 4;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 174 "libxlu_disk_l.l"
+#line 175 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 18:
@@ -1337,7 +1338,7 @@ case 18:
yyg->yy_c_buf_p = yy_cp = yy_bp + 6;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 175 "libxlu_disk_l.l"
+#line 176 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 19:
@@ -1345,7 +1346,7 @@ case 19:
yyg->yy_c_buf_p = yy_cp = yy_bp + 5;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 176 "libxlu_disk_l.l"
+#line 177 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 20:
@@ -1369,7 +1370,7 @@ YY_RULE_SETUP
case 22:
/* rule 22 can match eol */
YY_RULE_SETUP
-#line 186 "libxlu_disk_l.l"
+#line 187 "libxlu_disk_l.l"
{
char *colon;
STRIP(',');
@@ -1406,7 +1407,7 @@ YY_RULE_SETUP
YY_BREAK
case 23:
YY_RULE_SETUP
-#line 220 "libxlu_disk_l.l"
+#line 221 "libxlu_disk_l.l"
{
BEGIN(LEXERR);
yymore();
@@ -2516,12 +2517,4 @@ void xlu__disk_yyfree (void * ptr , yyscan_t yyscanner)
#define YYTABLES_NAME "yytables"
-#line 227 "libxlu_disk_l.l"
-
-/*
- * Local variables:
- * mode: C
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- */
+#line 228 "libxlu_disk_l.l"
diff --git a/tools/libxl/libxlu_disk_l.h b/tools/libxl/libxlu_disk_l.h
index a3fbd72..87bf96c 100644
--- a/tools/libxl/libxlu_disk_l.h
+++ b/tools/libxl/libxlu_disk_l.h
@@ -340,16 +340,8 @@ extern int xlu__disk_yylex (yyscan_t yyscanner);
#undef YY_DECL
#endif
-#line 227 "libxlu_disk_l.l"
+#line 228 "libxlu_disk_l.l"
#line 346 "libxlu_disk_l.h"
#undef xlu__disk_yyIN_HEADER
#endif /* xlu__disk_yyHEADER_H */
-
-/*
- * Local variables:
- * mode: C
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- */
diff --git a/tools/libxl/libxlu_disk_l.l b/tools/libxl/libxlu_disk_l.l
index a3e7180..6e53928 100644
--- a/tools/libxl/libxlu_disk_l.l
+++ b/tools/libxl/libxlu_disk_l.l
@@ -92,11 +92,12 @@ static void setaccess(DiskParseContext *dpc, const char *str) {
/* Sets ->format from the string. IDL should provide something for this. */
static void setformat(DiskParseContext *dpc, const char *str) {
- if (!strcmp(str,"") ||
- !strcmp(str,"raw")) DSET(dpc,format,FORMAT,str,RAW);
+ if (!strcmp(str,"")) DSET(dpc,format,FORMAT,str,RAW);
+ else if (!strcmp(str,"raw")) DSET(dpc,format,FORMAT,str,RAW);
else if (!strcmp(str,"qcow")) DSET(dpc,format,FORMAT,str,QCOW);
else if (!strcmp(str,"qcow2")) DSET(dpc,format,FORMAT,str,QCOW2);
else if (!strcmp(str,"vhd")) DSET(dpc,format,FORMAT,str,VHD);
+ else if (!strcmp(str,"empty")) DSET(dpc,format,FORMAT,str,EMPTY);
else xlu__disk_err(dpc,str,"unknown value for format");
}
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index e2aa8592..3fd152a 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -2211,7 +2211,8 @@ static void cd_insert(const char *dom, const char *virtdev, char *phys)
find_domain(dom);
- if (asprintf(&buf, "%s,%s:cdrom,r", phys ? phys : "", virtdev) < 0) {
+ if (asprintf(&buf, "vdev=%s,access=r,devtype=cdrom,target=%s",
+ virtdev, phys ? phys : "") < 0) {
fprintf(stderr, "out of memory\n");
return;
}
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
index f0a88c2..85ea768 100644
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -174,12 +174,12 @@ struct cmd_spec cmd_table[] = {
"- for internal use only",
},
{ "cd-insert",
- &main_cd_insert, 0, 1,
+ &main_cd_insert, 1, 1,
"Insert a cdrom into a guest's cd drive",
"<Domain> <VirtualDevice> <type:path>",
},
{ "cd-eject",
- &main_cd_eject, 0, 1,
+ &main_cd_eject, 1, 1,
"Eject a cdrom from a guest's cd drive",
"<Domain> <VirtualDevice>",
},
--
1.7.2.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/3] xl: disk parsing preparation for empty cdrom devices
2012-07-25 16:08 [PATCH v2 0/3] xl: empty disk devices Ian Jackson
2012-07-25 16:08 ` [PATCH 1/3] xl: support empty CDROM devices Ian Jackson
@ 2012-07-25 16:08 ` Ian Jackson
2012-07-25 16:08 ` [PATCH 3/3] xl: support xend empty cdrom device syntax Ian Jackson
2012-07-26 9:35 ` [PATCH v2 0/3] xl: empty disk devices Ian Campbell
3 siblings, 0 replies; 5+ messages in thread
From: Ian Jackson @ 2012-07-25 16:08 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Jackson
Prepare the ground for parsing the xend empty cdrom syntax, by
separating out some non-functional changes as this pre-patch:
* Clarify the disk syntax documentation wording to refer to deprecated
syntaxes too.
* Make DPC in libxlu_disk_l.l useable in the helper functions as well
as in lexer rules, by providing two definitions, each in force in
the appropriate parts of the file.
* Break the <vdev>[:<devtype>] parsing out into a helper function,
`vdev_and_devtype'.
No functional change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
docs/misc/xl-disk-configuration.txt | 11 ++--
tools/libxl/libxlu_disk_l.c | 104 +++++++++++++++++++---------------
tools/libxl/libxlu_disk_l.h | 2 +-
tools/libxl/libxlu_disk_l.l | 44 +++++++++-----
4 files changed, 93 insertions(+), 68 deletions(-)
diff --git a/docs/misc/xl-disk-configuration.txt b/docs/misc/xl-disk-configuration.txt
index 3bf20bf..740b8f6 100644
--- a/docs/misc/xl-disk-configuration.txt
+++ b/docs/misc/xl-disk-configuration.txt
@@ -164,16 +164,17 @@ information to be interpreted by /etc/xen/scripts/block-<script>.
-==================================
-DEPRECATED PARAMETERS AND PREFIXES
-==================================
+============================================
+DEPRECATED PARAMETERS, PREFIXES AND SYNTAXES
+============================================
-Deprecated values are acceptable and are intended work compatibly with
+Deprecated forms are acceptable and are intended work compatibly with
xend and xl from xen 4.1. In future they may print a warning.
Support for deprecated parameters and syntaxes are likely to be
dropped in future versions of xl.
-There is also support for a deprecated old syntax for <diskspec>:
+
+There is support for a deprecated old syntax for <diskspec>:
[<format>:][<target>],<vdev>[:<devtype>],<access> (deprecated)
diff --git a/tools/libxl/libxlu_disk_l.c b/tools/libxl/libxlu_disk_l.c
index 8b9f44d..b4ad651 100644
--- a/tools/libxl/libxlu_disk_l.c
+++ b/tools/libxl/libxlu_disk_l.c
@@ -794,8 +794,6 @@ void xlu__disk_yyset_column(int column_no, yyscan_t yyscanner);
* and particularly to avoid repeating boilerplate values such as
* DPC->disk, yytext, etc. */
-#define DPC ((DiskParseContext*)yyextra)
-
/* Sets an enum, checking it hasn't already been set to a different value */
#define DSET(dpc,member,enumname,str,valname) do{ \
if (dpc->disk->member != LIBXL_DISK_##enumname##_UNKNOWN && \
@@ -828,6 +826,8 @@ static void savestring(DiskParseContext *dpc, const char *what_respecified,
*update = strdup(value);
}
+#define DPC dpc /* our convention in lexer helper functions */
+
/* Sets ->readwrite from the string. This ought to be an enum, perhaps. */
static void setaccess(DiskParseContext *dpc, const char *str) {
if (!strcmp(str, "r") || !strcmp(str, "ro")) {
@@ -860,8 +860,32 @@ static void setbackendtype(DiskParseContext *dpc, const char *str) {
#define DEPRECATE(usewhatinstead) /* not currently reported */
+/* Handles a vdev positional parameter which includes a devtype. */
+static int vdev_and_devtype(DiskParseContext *dpc, char *str) {
+ /* returns 1 if it was <vdev>:<devtype>, 0 (doing nothing) otherwise */
+ char *colon = strrchr(str, ':');
+ if (!colon)
+ return 0;
+
+ DEPRECATE("use `devtype=...'");
+ *colon++ = 0;
+ SAVESTRING("vdev", vdev, str);
+
+ if (!strcmp(colon,"cdrom")) {
+ DPC->disk->is_cdrom = 1;
+ } else if (!strcmp(colon,"disk")) {
+ DPC->disk->is_cdrom = 0;
+ } else {
+ xlu__disk_err(DPC,colon,"unknown deprecated type");
+ }
+ return 1;
+}
-#line 865 "libxlu_disk_l.c"
+#undef DPC /* needs to be defined differently the actual lexer */
+#define DPC ((DiskParseContext*)yyextra)
+
+
+#line 889 "libxlu_disk_l.c"
#define INITIAL 0
#define LEXERR 1
@@ -1097,12 +1121,12 @@ YY_DECL
register int yy_act;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
-#line 127 "libxlu_disk_l.l"
+#line 151 "libxlu_disk_l.l"
/*----- the scanner rules which do the parsing -----*/
-#line 1106 "libxlu_disk_l.c"
+#line 1130 "libxlu_disk_l.c"
if ( !yyg->yy_init )
{
@@ -1223,72 +1247,72 @@ do_action: /* This label is used only to access EOF actions. */
case 1:
/* rule 1 can match eol */
YY_RULE_SETUP
-#line 130 "libxlu_disk_l.l"
+#line 155 "libxlu_disk_l.l"
{ /* ignore whitespace before parameters */ }
YY_BREAK
/* ordinary parameters setting enums or strings */
case 2:
/* rule 2 can match eol */
YY_RULE_SETUP
-#line 134 "libxlu_disk_l.l"
+#line 159 "libxlu_disk_l.l"
{ STRIP(','); setformat(DPC, FROMEQUALS); }
YY_BREAK
case 3:
YY_RULE_SETUP
-#line 136 "libxlu_disk_l.l"
+#line 161 "libxlu_disk_l.l"
{ DPC->disk->is_cdrom = 1; }
YY_BREAK
case 4:
YY_RULE_SETUP
-#line 137 "libxlu_disk_l.l"
+#line 162 "libxlu_disk_l.l"
{ DPC->disk->is_cdrom = 1; }
YY_BREAK
case 5:
YY_RULE_SETUP
-#line 138 "libxlu_disk_l.l"
+#line 163 "libxlu_disk_l.l"
{ DPC->disk->is_cdrom = 0; }
YY_BREAK
case 6:
/* rule 6 can match eol */
YY_RULE_SETUP
-#line 139 "libxlu_disk_l.l"
+#line 164 "libxlu_disk_l.l"
{ xlu__disk_err(DPC,yytext,"unknown value for type"); }
YY_BREAK
case 7:
/* rule 7 can match eol */
YY_RULE_SETUP
-#line 141 "libxlu_disk_l.l"
+#line 166 "libxlu_disk_l.l"
{ STRIP(','); setaccess(DPC, FROMEQUALS); }
YY_BREAK
case 8:
/* rule 8 can match eol */
YY_RULE_SETUP
-#line 142 "libxlu_disk_l.l"
+#line 167 "libxlu_disk_l.l"
{ STRIP(','); setbackendtype(DPC,FROMEQUALS); }
YY_BREAK
case 9:
/* rule 9 can match eol */
YY_RULE_SETUP
-#line 144 "libxlu_disk_l.l"
+#line 169 "libxlu_disk_l.l"
{ STRIP(','); SAVESTRING("vdev", vdev, FROMEQUALS); }
YY_BREAK
case 10:
/* rule 10 can match eol */
YY_RULE_SETUP
-#line 145 "libxlu_disk_l.l"
+#line 170 "libxlu_disk_l.l"
{ STRIP(','); SAVESTRING("script", script, FROMEQUALS); }
YY_BREAK
/* the target magic parameter, eats the rest of the string */
case 11:
YY_RULE_SETUP
-#line 149 "libxlu_disk_l.l"
+#line 174 "libxlu_disk_l.l"
{ STRIP(','); SAVESTRING("target", pdev_path, FROMEQUALS); }
YY_BREAK
/* unknown parameters */
case 12:
/* rule 12 can match eol */
YY_RULE_SETUP
-#line 153 "libxlu_disk_l.l"
+#line 178 "libxlu_disk_l.l"
{ xlu__disk_err(DPC,yytext,"unknown parameter"); }
YY_BREAK
/* deprecated prefixes */
@@ -1296,7 +1320,7 @@ YY_RULE_SETUP
* matched the whole string, so these patterns take precedence */
case 13:
YY_RULE_SETUP
-#line 161 "libxlu_disk_l.l"
+#line 185 "libxlu_disk_l.l"
{
STRIP(':');
DPC->had_depr_prefix=1; DEPRECATE("use `[format=]...,'");
@@ -1305,7 +1329,7 @@ YY_RULE_SETUP
YY_BREAK
case 14:
YY_RULE_SETUP
-#line 167 "libxlu_disk_l.l"
+#line 191 "libxlu_disk_l.l"
{
STRIP(':');
DPC->had_depr_prefix=1; DEPRECATE("use `script=...'");
@@ -1317,12 +1341,12 @@ case 15:
yyg->yy_c_buf_p = yy_cp = yy_bp + 8;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 172 "libxlu_disk_l.l"
+#line 197 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 16:
YY_RULE_SETUP
-#line 173 "libxlu_disk_l.l"
+#line 198 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 17:
@@ -1330,7 +1354,7 @@ case 17:
yyg->yy_c_buf_p = yy_cp = yy_bp + 4;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 175 "libxlu_disk_l.l"
+#line 199 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 18:
@@ -1338,7 +1362,7 @@ case 18:
yyg->yy_c_buf_p = yy_cp = yy_bp + 6;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 176 "libxlu_disk_l.l"
+#line 200 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 19:
@@ -1346,7 +1370,7 @@ case 19:
yyg->yy_c_buf_p = yy_cp = yy_bp + 5;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 177 "libxlu_disk_l.l"
+#line 201 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 20:
@@ -1354,13 +1378,13 @@ case 20:
yyg->yy_c_buf_p = yy_cp = yy_bp + 4;
YY_DO_BEFORE_ACTION; /* set up yytext again */
YY_RULE_SETUP
-#line 177 "libxlu_disk_l.l"
+#line 202 "libxlu_disk_l.l"
{ DPC->had_depr_prefix=1; DEPRECATE(0); }
YY_BREAK
case 21:
/* rule 21 can match eol */
YY_RULE_SETUP
-#line 179 "libxlu_disk_l.l"
+#line 204 "libxlu_disk_l.l"
{
xlu__disk_err(DPC,yytext,"unknown deprecated disk prefix");
return 0;
@@ -1370,9 +1394,8 @@ YY_RULE_SETUP
case 22:
/* rule 22 can match eol */
YY_RULE_SETUP
-#line 187 "libxlu_disk_l.l"
+#line 211 "libxlu_disk_l.l"
{
- char *colon;
STRIP(',');
if (DPC->err) {
@@ -1383,19 +1406,8 @@ YY_RULE_SETUP
DPC->disk->format == LIBXL_DISK_FORMAT_UNKNOWN) {
setformat(DPC,yytext);
} else if (!DPC->disk->vdev) {
- colon = strrchr(yytext, ':');
- if (colon) {
- DEPRECATE("use `devtype=...'");
- *colon++ = 0;
- if (!strcmp(colon,"cdrom")) {
- DPC->disk->is_cdrom = 1;
- } else if (!strcmp(colon,"disk")) {
- DPC->disk->is_cdrom = 0;
- } else {
- xlu__disk_err(DPC,colon,"unknown deprecated type");
- }
- }
- SAVESTRING("vdev", vdev, yytext);
+ if (!vdev_and_devtype(DPC,yytext))
+ SAVESTRING("vdev", vdev, yytext);
} else if (!DPC->access_set) {
DPC->access_set = 1;
setaccess(DPC,yytext);
@@ -1407,7 +1419,7 @@ YY_RULE_SETUP
YY_BREAK
case 23:
YY_RULE_SETUP
-#line 221 "libxlu_disk_l.l"
+#line 233 "libxlu_disk_l.l"
{
BEGIN(LEXERR);
yymore();
@@ -1415,17 +1427,17 @@ YY_RULE_SETUP
YY_BREAK
case 24:
YY_RULE_SETUP
-#line 224 "libxlu_disk_l.l"
+#line 237 "libxlu_disk_l.l"
{
xlu__disk_err(DPC,yytext,"bad disk syntax"); return 0;
}
YY_BREAK
case 25:
YY_RULE_SETUP
-#line 227 "libxlu_disk_l.l"
+#line 240 "libxlu_disk_l.l"
YY_FATAL_ERROR( "flex scanner jammed" );
YY_BREAK
-#line 1428 "libxlu_disk_l.c"
+#line 1441 "libxlu_disk_l.c"
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(LEXERR):
yyterminate();
@@ -2517,4 +2529,4 @@ void xlu__disk_yyfree (void * ptr , yyscan_t yyscanner)
#define YYTABLES_NAME "yytables"
-#line 228 "libxlu_disk_l.l"
+#line 240 "libxlu_disk_l.l"
diff --git a/tools/libxl/libxlu_disk_l.h b/tools/libxl/libxlu_disk_l.h
index 87bf96c..4d0328e 100644
--- a/tools/libxl/libxlu_disk_l.h
+++ b/tools/libxl/libxlu_disk_l.h
@@ -340,7 +340,7 @@ extern int xlu__disk_yylex (yyscan_t yyscanner);
#undef YY_DECL
#endif
-#line 228 "libxlu_disk_l.l"
+#line 240 "libxlu_disk_l.l"
#line 346 "libxlu_disk_l.h"
#undef xlu__disk_yyIN_HEADER
diff --git a/tools/libxl/libxlu_disk_l.l b/tools/libxl/libxlu_disk_l.l
index 6e53928..7e0a635 100644
--- a/tools/libxl/libxlu_disk_l.l
+++ b/tools/libxl/libxlu_disk_l.l
@@ -45,8 +45,6 @@ void xlu__disk_yyset_column(int column_no, yyscan_t yyscanner);
* and particularly to avoid repeating boilerplate values such as
* DPC->disk, yytext, etc. */
-#define DPC ((DiskParseContext*)yyextra)
-
/* Sets an enum, checking it hasn't already been set to a different value */
#define DSET(dpc,member,enumname,str,valname) do{ \
if (dpc->disk->member != LIBXL_DISK_##enumname##_UNKNOWN && \
@@ -79,6 +77,8 @@ static void savestring(DiskParseContext *dpc, const char *what_respecified,
*update = strdup(value);
}
+#define DPC dpc /* our convention in lexer helper functions */
+
/* Sets ->readwrite from the string. This ought to be an enum, perhaps. */
static void setaccess(DiskParseContext *dpc, const char *str) {
if (!strcmp(str, "r") || !strcmp(str, "ro")) {
@@ -111,6 +111,30 @@ static void setbackendtype(DiskParseContext *dpc, const char *str) {
#define DEPRECATE(usewhatinstead) /* not currently reported */
+/* Handles a vdev positional parameter which includes a devtype. */
+static int vdev_and_devtype(DiskParseContext *dpc, char *str) {
+ /* returns 1 if it was <vdev>:<devtype>, 0 (doing nothing) otherwise */
+ char *colon = strrchr(str, ':');
+ if (!colon)
+ return 0;
+
+ DEPRECATE("use `devtype=...'");
+ *colon++ = 0;
+ SAVESTRING("vdev", vdev, str);
+
+ if (!strcmp(colon,"cdrom")) {
+ DPC->disk->is_cdrom = 1;
+ } else if (!strcmp(colon,"disk")) {
+ DPC->disk->is_cdrom = 0;
+ } else {
+ xlu__disk_err(DPC,colon,"unknown deprecated type");
+ }
+ return 1;
+}
+
+#undef DPC /* needs to be defined differently the actual lexer */
+#define DPC ((DiskParseContext*)yyextra)
+
%}
%option warn
@@ -185,7 +209,6 @@ phy:/.* { DPC->had_depr_prefix=1; DEPRECATE(0); }
/* positional parameters */
[^=,]*,|[^=,]+,? {
- char *colon;
STRIP(',');
if (DPC->err) {
@@ -196,19 +219,8 @@ phy:/.* { DPC->had_depr_prefix=1; DEPRECATE(0); }
DPC->disk->format == LIBXL_DISK_FORMAT_UNKNOWN) {
setformat(DPC,yytext);
} else if (!DPC->disk->vdev) {
- colon = strrchr(yytext, ':');
- if (colon) {
- DEPRECATE("use `devtype=...'");
- *colon++ = 0;
- if (!strcmp(colon,"cdrom")) {
- DPC->disk->is_cdrom = 1;
- } else if (!strcmp(colon,"disk")) {
- DPC->disk->is_cdrom = 0;
- } else {
- xlu__disk_err(DPC,colon,"unknown deprecated type");
- }
- }
- SAVESTRING("vdev", vdev, yytext);
+ if (!vdev_and_devtype(DPC,yytext))
+ SAVESTRING("vdev", vdev, yytext);
} else if (!DPC->access_set) {
DPC->access_set = 1;
setaccess(DPC,yytext);
--
1.7.2.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/3] xl: support xend empty cdrom device syntax
2012-07-25 16:08 [PATCH v2 0/3] xl: empty disk devices Ian Jackson
2012-07-25 16:08 ` [PATCH 1/3] xl: support empty CDROM devices Ian Jackson
2012-07-25 16:08 ` [PATCH 2/3] xl: disk parsing preparation for empty cdrom devices Ian Jackson
@ 2012-07-25 16:08 ` Ian Jackson
2012-07-26 9:35 ` [PATCH v2 0/3] xl: empty disk devices Ian Campbell
3 siblings, 0 replies; 5+ messages in thread
From: Ian Jackson @ 2012-07-25 16:08 UTC (permalink / raw)
To: xen-devel; +Cc: Ian Jackson, Ian Campbell
xend accepts `,hdc:cdrom,r' as an empty CDROM drive. However this is
not consistent with the existing xl syntax in
docs/misc/xl-disk-configuration.txt which requires `,,hdc:cdrom,r'
(the additional positional paramter is the format).
We fix this by spotting the case specially: when the target is empty
and the format contains a colon, reinterpret the format as
<vdev>:<devtype>.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
-
Changes in v2:
* Rebased on top of `xl: support empty CDROM devices'
* Fix commit message.
---
docs/misc/xl-disk-configuration.txt | 11 +++++++++++
tools/libxl/check-xl-disk-parse | 1 +
tools/libxl/libxlu_disk_l.c | 16 ++++++++++------
tools/libxl/libxlu_disk_l.h | 2 +-
tools/libxl/libxlu_disk_l.l | 6 +++++-
5 files changed, 28 insertions(+), 8 deletions(-)
diff --git a/docs/misc/xl-disk-configuration.txt b/docs/misc/xl-disk-configuration.txt
index 740b8f6..5da5e11 100644
--- a/docs/misc/xl-disk-configuration.txt
+++ b/docs/misc/xl-disk-configuration.txt
@@ -221,3 +221,14 @@ to specify several of these, for example:
"tap:aio:/some/path..."
All of these prefixes are now stripped and ignored.
+
+
+Missing format and empty target
+-------------------------------
+
+The following syntax is also supported:
+
+ ,<vdev>:<devtype>,<access> (deprecated)
+
+This is soley for compatibility with xend's syntax for empty cdroms,
+which is (for example) ",hdc:cdrom,r".
diff --git a/tools/libxl/check-xl-disk-parse b/tools/libxl/check-xl-disk-parse
index 7a33780..ffe3613 100755
--- a/tools/libxl/check-xl-disk-parse
+++ b/tools/libxl/check-xl-disk-parse
@@ -123,6 +123,7 @@ disk: {
EOF
one 0 devtype=cdrom,,,hdc
one 0 ,,hdc:cdrom,r
+one 0 ,hdc:cdrom,r
one 0 vdev=hdc,access=r,devtype=cdrom,target=
one 0 ,empty,hdc:cdrom,r
diff --git a/tools/libxl/libxlu_disk_l.c b/tools/libxl/libxlu_disk_l.c
index b4ad651..f690385 100644
--- a/tools/libxl/libxlu_disk_l.c
+++ b/tools/libxl/libxlu_disk_l.c
@@ -1404,7 +1404,11 @@ YY_RULE_SETUP
SAVESTRING("target", pdev_path, yytext);
} else if (!DPC->had_depr_prefix &&
DPC->disk->format == LIBXL_DISK_FORMAT_UNKNOWN) {
- setformat(DPC,yytext);
+ if (!*DPC->disk->pdev_path && vdev_and_devtype(DPC,yytext)) {
+ DPC->disk->format = LIBXL_DISK_FORMAT_EMPTY;
+ } else {
+ setformat(DPC,yytext);
+ }
} else if (!DPC->disk->vdev) {
if (!vdev_and_devtype(DPC,yytext))
SAVESTRING("vdev", vdev, yytext);
@@ -1419,7 +1423,7 @@ YY_RULE_SETUP
YY_BREAK
case 23:
YY_RULE_SETUP
-#line 233 "libxlu_disk_l.l"
+#line 237 "libxlu_disk_l.l"
{
BEGIN(LEXERR);
yymore();
@@ -1427,17 +1431,17 @@ YY_RULE_SETUP
YY_BREAK
case 24:
YY_RULE_SETUP
-#line 237 "libxlu_disk_l.l"
+#line 241 "libxlu_disk_l.l"
{
xlu__disk_err(DPC,yytext,"bad disk syntax"); return 0;
}
YY_BREAK
case 25:
YY_RULE_SETUP
-#line 240 "libxlu_disk_l.l"
+#line 244 "libxlu_disk_l.l"
YY_FATAL_ERROR( "flex scanner jammed" );
YY_BREAK
-#line 1441 "libxlu_disk_l.c"
+#line 1445 "libxlu_disk_l.c"
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(LEXERR):
yyterminate();
@@ -2529,4 +2533,4 @@ void xlu__disk_yyfree (void * ptr , yyscan_t yyscanner)
#define YYTABLES_NAME "yytables"
-#line 240 "libxlu_disk_l.l"
+#line 244 "libxlu_disk_l.l"
diff --git a/tools/libxl/libxlu_disk_l.h b/tools/libxl/libxlu_disk_l.h
index 4d0328e..26c9a86 100644
--- a/tools/libxl/libxlu_disk_l.h
+++ b/tools/libxl/libxlu_disk_l.h
@@ -340,7 +340,7 @@ extern int xlu__disk_yylex (yyscan_t yyscanner);
#undef YY_DECL
#endif
-#line 240 "libxlu_disk_l.l"
+#line 244 "libxlu_disk_l.l"
#line 346 "libxlu_disk_l.h"
#undef xlu__disk_yyIN_HEADER
diff --git a/tools/libxl/libxlu_disk_l.l b/tools/libxl/libxlu_disk_l.l
index 7e0a635..f4e6b1a 100644
--- a/tools/libxl/libxlu_disk_l.l
+++ b/tools/libxl/libxlu_disk_l.l
@@ -217,7 +217,11 @@ phy:/.* { DPC->had_depr_prefix=1; DEPRECATE(0); }
SAVESTRING("target", pdev_path, yytext);
} else if (!DPC->had_depr_prefix &&
DPC->disk->format == LIBXL_DISK_FORMAT_UNKNOWN) {
- setformat(DPC,yytext);
+ if (!*DPC->disk->pdev_path && vdev_and_devtype(DPC,yytext)) {
+ DPC->disk->format = LIBXL_DISK_FORMAT_EMPTY;
+ } else {
+ setformat(DPC,yytext);
+ }
} else if (!DPC->disk->vdev) {
if (!vdev_and_devtype(DPC,yytext))
SAVESTRING("vdev", vdev, yytext);
--
1.7.2.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 0/3] xl: empty disk devices
2012-07-25 16:08 [PATCH v2 0/3] xl: empty disk devices Ian Jackson
` (2 preceding siblings ...)
2012-07-25 16:08 ` [PATCH 3/3] xl: support xend empty cdrom device syntax Ian Jackson
@ 2012-07-26 9:35 ` Ian Campbell
3 siblings, 0 replies; 5+ messages in thread
From: Ian Campbell @ 2012-07-26 9:35 UTC (permalink / raw)
To: Ian Jackson; +Cc: xen-devel@lists.xen.org
On Wed, 2012-07-25 at 17:08 +0100, Ian Jackson wrote:
> This now includes Ian Campbell's original fix, and seems to work
> (well, pass the tests) for me.
I tried these too and they seem good. Applied, thanks.
>
> 1/3 xl: support empty CDROM devices
> 2/3 xl: disk parsing preparation for empty cdrom devices
> 3/3 xl: support xend empty cdrom device syntax
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-07-26 9:35 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-25 16:08 [PATCH v2 0/3] xl: empty disk devices Ian Jackson
2012-07-25 16:08 ` [PATCH 1/3] xl: support empty CDROM devices Ian Jackson
2012-07-25 16:08 ` [PATCH 2/3] xl: disk parsing preparation for empty cdrom devices Ian Jackson
2012-07-25 16:08 ` [PATCH 3/3] xl: support xend empty cdrom device syntax Ian Jackson
2012-07-26 9:35 ` [PATCH v2 0/3] xl: empty disk devices Ian Campbell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).