From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: linux-kernel@vger.kernel.org, xen-devel@lists.xensource.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [PATCH 3/6] xen/apic/xenbus/swiotlb/pcifront/grant/tmem: Make functions or variables static.
Date: Thu, 16 Aug 2012 12:12:35 -0400 [thread overview]
Message-ID: <1345133558-23341-4-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1345133558-23341-1-git-send-email-konrad.wilk@oracle.com>
There is no need for those functions/variables to be visible. Make them
static and also fix the compile warnings of this sort:
drivers/xen/<some file>.c: warning: symbol '<blah>' was not declared. Should it be static?
Some of them just require including the header file that
declares the functions.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
arch/x86/xen/apic.c | 3 ++-
arch/x86/xen/enlighten.c | 2 ++
arch/x86/xen/pci-swiotlb-xen.c | 2 ++
arch/x86/xen/platform-pci-unplug.c | 1 +
drivers/pci/xen-pcifront.c | 2 +-
drivers/xen/gntdev.c | 2 +-
drivers/xen/grant-table.c | 13 ++++++-------
drivers/xen/swiotlb-xen.c | 2 +-
drivers/xen/tmem.c | 1 +
drivers/xen/xenbus/xenbus_dev_backend.c | 2 +-
drivers/xen/xenbus/xenbus_probe.c | 4 ++--
11 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
index ec57bd3..7005ced 100644
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -6,8 +6,9 @@
#include <xen/xen.h>
#include <xen/interface/physdev.h>
+#include "xen-ops.h"
-unsigned int xen_io_apic_read(unsigned apic, unsigned reg)
+static unsigned int xen_io_apic_read(unsigned apic, unsigned reg)
{
struct physdev_apic apic_op;
int ret;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index acf906c..2c36e6e 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -81,6 +81,8 @@
#include "smp.h"
#include "multicalls.h"
+#include <xen/events.h>
+
EXPORT_SYMBOL_GPL(hypercall_page);
DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index 1667602..db4db14 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -13,6 +13,8 @@
#include <asm/dma.h>
#endif
#include <linux/export.h>
+
+#include <asm/xen/swiotlb-xen.h>
int xen_swiotlb __read_mostly;
static struct dma_map_ops xen_swiotlb_dma_ops = {
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
index ffcf261..0a78524 100644
--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <xen/platform_pci.h>
+#include "xen-ops.h"
#define XEN_PLATFORM_ERR_MAGIC -1
#define XEN_PLATFORM_ERR_PROTOCOL -2
diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index ca92801..ebd1ddb 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -237,7 +237,7 @@ static int pcifront_bus_write(struct pci_bus *bus, unsigned int devfn,
return errno_to_pcibios_err(do_pci_op(pdev, &op));
}
-struct pci_ops pcifront_bus_ops = {
+static struct pci_ops pcifront_bus_ops = {
.read = pcifront_bus_read,
.write = pcifront_bus_write,
};
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 1ffd03b..163b7e9 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -445,7 +445,7 @@ static void mn_release(struct mmu_notifier *mn,
spin_unlock(&priv->lock);
}
-struct mmu_notifier_ops gntdev_mmu_ops = {
+static struct mmu_notifier_ops gntdev_mmu_ops = {
.release = mn_release,
.invalidate_page = mn_invl_page,
.invalidate_range_start = mn_invl_range_start,
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 0bfc1ef..4061943 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -285,10 +285,9 @@ int gnttab_grant_foreign_access(domid_t domid, unsigned long frame,
}
EXPORT_SYMBOL_GPL(gnttab_grant_foreign_access);
-void gnttab_update_subpage_entry_v2(grant_ref_t ref, domid_t domid,
- unsigned long frame, int flags,
- unsigned page_off,
- unsigned length)
+static void gnttab_update_subpage_entry_v2(grant_ref_t ref, domid_t domid,
+ unsigned long frame, int flags,
+ unsigned page_off, unsigned length)
{
gnttab_shared.v2[ref].sub_page.frame = frame;
gnttab_shared.v2[ref].sub_page.page_off = page_off;
@@ -345,9 +344,9 @@ bool gnttab_subpage_grants_available(void)
}
EXPORT_SYMBOL_GPL(gnttab_subpage_grants_available);
-void gnttab_update_trans_entry_v2(grant_ref_t ref, domid_t domid,
- int flags, domid_t trans_domid,
- grant_ref_t trans_gref)
+static void gnttab_update_trans_entry_v2(grant_ref_t ref, domid_t domid,
+ int flags, domid_t trans_domid,
+ grant_ref_t trans_gref)
{
gnttab_shared.v2[ref].transitive.trans_domid = trans_domid;
gnttab_shared.v2[ref].transitive.gref = trans_gref;
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 09e25a6..307a908 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -52,7 +52,7 @@ static unsigned long xen_io_tlb_nslabs;
* Quick lookup value of the bus address of the IOTLB.
*/
-u64 start_dma_addr;
+static u64 start_dma_addr;
static dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
{
diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c
index 89f264c..144564e 100644
--- a/drivers/xen/tmem.c
+++ b/drivers/xen/tmem.c
@@ -21,6 +21,7 @@
#include <asm/xen/hypercall.h>
#include <asm/xen/page.h>
#include <asm/xen/hypervisor.h>
+#include <xen/tmem.h>
#define TMEM_CONTROL 0
#define TMEM_NEW_POOL 1
diff --git a/drivers/xen/xenbus/xenbus_dev_backend.c b/drivers/xen/xenbus/xenbus_dev_backend.c
index be738c4..d730008 100644
--- a/drivers/xen/xenbus/xenbus_dev_backend.c
+++ b/drivers/xen/xenbus/xenbus_dev_backend.c
@@ -107,7 +107,7 @@ static int xenbus_backend_mmap(struct file *file, struct vm_area_struct *vma)
return 0;
}
-const struct file_operations xenbus_backend_fops = {
+static const struct file_operations xenbus_backend_fops = {
.open = xenbus_backend_open,
.mmap = xenbus_backend_mmap,
.unlocked_ioctl = xenbus_backend_ioctl,
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index b793723..91d3d654 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -324,8 +324,8 @@ static int cmp_dev(struct device *dev, void *data)
return 0;
}
-struct xenbus_device *xenbus_device_find(const char *nodename,
- struct bus_type *bus)
+static struct xenbus_device *xenbus_device_find(const char *nodename,
+ struct bus_type *bus)
{
struct xb_find_info info = { .dev = NULL, .nodename = nodename };
--
1.7.7.6
next prev parent reply other threads:[~2012-08-16 16:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-16 16:12 [PATCH] Various cleanups in the code base found with sparse (v1) for v3.7 Konrad Rzeszutek Wilk
2012-08-16 16:12 ` [PATCH 1/6] xen/swiotlb: Remove functions not needed anymore Konrad Rzeszutek Wilk
2012-08-16 16:12 ` [PATCH 2/6] xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer Konrad Rzeszutek Wilk
2012-08-16 16:12 ` Konrad Rzeszutek Wilk [this message]
2012-08-16 16:12 ` [PATCH 4/6] xen/mmu: Fix compile warnings Konrad Rzeszutek Wilk
2012-08-17 10:08 ` [Xen-devel] " Ian Campbell
2012-08-16 16:12 ` [PATCH 5/6] xen/blkback: Fix compile warning Konrad Rzeszutek Wilk
2012-08-16 16:12 ` [PATCH 6/6] iommu: Fixes duplicate const warning Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345133558-23341-4-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).