xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Tim Deegan <tim@xen.org>
To: xen-devel@lists.xen.org
Cc: Ian Jackson <ian.jackson@eu.citrix.com>,
	Ian Campbell <ian.campbell@citrix.com>,
	Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Subject: [PATCH] tools/libxl: run libxl__arch_domain_create() much earlier.
Date: Thu, 14 Mar 2013 12:39:39 +0000	[thread overview]
Message-ID: <1363264779-25566-1-git-send-email-tim@xen.org> (raw)

Among other things, arch_domain_create() sets the shadow(/hap/p2m)
memory allocation, which must happen after vcpus are assigned (or the
shadow op will fail) but before memory is allocated (or we might run
out of p2m memory).

libxl__build_pre(), which already sets similar things like maxmem,
semes like a reasonable spot for it.  That needed a bit of plumbing to
get the right datastructure from the caller.

As a side-effect, the return code from libxl__arch_domain_create() is
no longer ignored.

Reported-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Tim Deegan <tim@xen.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
---
 tools/libxl/libxl_create.c   |   10 +++++-----
 tools/libxl/libxl_dm.c       |    2 +-
 tools/libxl/libxl_dom.c      |   10 +++++++---
 tools/libxl/libxl_internal.h |    5 +++--
 4 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 2ea628a..30a4507 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -315,15 +315,16 @@ static int init_console_info(libxl__device_console *console, int dev_num)
 }
 
 int libxl__domain_build(libxl__gc *gc,
-                        libxl_domain_build_info *info,
+                        libxl_domain_config *d_config,
                         uint32_t domid,
                         libxl__domain_build_state *state)
 {
+    libxl_domain_build_info *const info = &d_config->b_info;
     char **vments = NULL, **localents = NULL;
     struct timeval start_time;
     int i, ret;
 
-    ret = libxl__build_pre(gc, domid, info, state);
+    ret = libxl__build_pre(gc, domid, d_config, state);
     if (ret)
         goto out;
 
@@ -750,14 +751,14 @@ static void domcreate_bootloader_done(libxl__egc *egc,
     dcs->dmss.callback = domcreate_devmodel_started;
 
     if ( restore_fd < 0 ) {
-        rc = libxl__domain_build(gc, &d_config->b_info, domid, state);
+        rc = libxl__domain_build(gc, d_config, domid, state);
         domcreate_rebuild_done(egc, dcs, rc);
         return;
     }
 
     /* Restore */
 
-    rc = libxl__build_pre(gc, domid, info, state);
+    rc = libxl__build_pre(gc, domid, d_config, state);
     if (rc)
         goto out;
 
@@ -1169,7 +1170,6 @@ static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
         }
     }
 
-    libxl__arch_domain_create(gc, d_config, domid);
     domcreate_console_available(egc, dcs);
 
     domcreate_complete(egc, dcs, 0);
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index a8a36d7..3969975 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -828,7 +828,7 @@ void libxl__spawn_stub_dm(libxl__egc *egc, libxl__stub_dm_spawn_state *sdss)
     if (ret)
         goto out;
     uint32_t dm_domid = sdss->pvqemu.guest_domid;
-    ret = libxl__domain_build(gc, &dm_config->b_info, dm_domid, stubdom_state);
+    ret = libxl__domain_build(gc, dm_config, dm_domid, stubdom_state);
     if (ret)
         goto out;
 
diff --git a/tools/libxl/libxl_dom.c b/tools/libxl/libxl_dom.c
index de555ee..2dd429f 100644
--- a/tools/libxl/libxl_dom.c
+++ b/tools/libxl/libxl_dom.c
@@ -18,6 +18,7 @@
 #include <glob.h>
 
 #include "libxl_internal.h"
+#include "libxl_arch.h"
 
 #include <xc_dom.h>
 #include <xen/hvm/hvm_info_table.h>
@@ -199,10 +200,12 @@ static int numa_place_domain(libxl__gc *gc, uint32_t domid,
 }
 
 int libxl__build_pre(libxl__gc *gc, uint32_t domid,
-              libxl_domain_build_info *info, libxl__domain_build_state *state)
+              libxl_domain_config *d_config, libxl__domain_build_state *state)
 {
+    libxl_domain_build_info *const info = &d_config->b_info;
     libxl_ctx *ctx = libxl__gc_owner(gc);
     char *xs_domid, *con_domid;
+    int rc;
 
     xc_domain_max_vcpus(ctx->xch, domid, info->max_vcpus);
 
@@ -216,7 +219,6 @@ int libxl__build_pre(libxl__gc *gc, uint32_t domid,
      * whatever that turns out to be.
      */
     if (libxl_defbool_val(info->numa_placement)) {
-        int rc;
 
         if (!libxl_bitmap_is_full(&info->cpumap)) {
             LOG(ERROR, "Can run NUMA placement only if no vcpu "
@@ -243,7 +245,9 @@ int libxl__build_pre(libxl__gc *gc, uint32_t domid,
     state->console_port = xc_evtchn_alloc_unbound(ctx->xch, domid, state->console_domid);
     state->vm_generationid_addr = 0;
 
-    return 0;
+    rc = libxl__arch_domain_create(gc, d_config, domid);
+
+    return rc;
 }
 
 int libxl__build_post(libxl__gc *gc, uint32_t domid,
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 8be086d..3ba3a21 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -884,7 +884,8 @@ typedef struct {
 } libxl__domain_build_state;
 
 _hidden int libxl__build_pre(libxl__gc *gc, uint32_t domid,
-              libxl_domain_build_info *info, libxl__domain_build_state *state);
+              libxl_domain_config * const d_config,
+              libxl__domain_build_state *state);
 _hidden int libxl__build_post(libxl__gc *gc, uint32_t domid,
                libxl_domain_build_info *info, libxl__domain_build_state *state,
                char **vms_ents, char **local_ents);
@@ -1278,7 +1279,7 @@ _hidden int libxl__domain_make(libxl__gc *gc,
                                uint32_t *domid);
 
 _hidden int libxl__domain_build(libxl__gc *gc,
-                                libxl_domain_build_info *info,
+                                libxl_domain_config *d_config,
                                 uint32_t domid,
                                 libxl__domain_build_state *state);
 
-- 
1.7.10.4

             reply	other threads:[~2013-03-14 12:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-14 12:39 Tim Deegan [this message]
2013-03-28  9:49 ` [PATCH] tools/libxl: run libxl__arch_domain_create() much earlier Tim Deegan
2013-03-28 15:53 ` Ian Jackson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363264779-25566-1-git-send-email-tim@xen.org \
    --to=tim@xen.org \
    --cc=ian.campbell@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).