From: David Vrabel <david.vrabel@citrix.com>
To: xen-devel@lists.xen.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Stefano Stabellini <stefano.stabellini@citrix.com>,
David Vrabel <david.vrabel@citrix.com>,
Jan Beulich <JBeulich@suse.com>
Subject: [PATCHv3] xen/p2m: check MFN is in range before using the m2p table
Date: Fri, 13 Sep 2013 15:13:30 +0100 [thread overview]
Message-ID: <1379081610-27804-1-git-send-email-david.vrabel@citrix.com> (raw)
From: David Vrabel <david.vrabel@citrix.com>
On hosts with more than 168 GB of memory, a 32-bit guest may attempt
to grant map an MFN that is not cannot lookup in its mapping of the
m2p table. There is an m2p lookup as part of m2p_add_override() and
m2p_remove_override(). The lookup falls off the end of the mapped
portion of the m2p and (because the mapping is at the highest virtual
address) wraps around and the lookup causes a fault on what appears to
be a user space address.
do_page_fault() (thinking it's a fault to a userspace address), tries
to lock mm->mmap_sem. If the gntdev device is used for the grant map,
m2p_add_override() is called from from gnttab_mmap() with mm->mmap_sem
already locked. do_page_fault() then deadlocks.
The deadlock would most commonly occur when a 64-bit guest is started
and xenconsoled attempts to grant map its console ring.
Introduce mfn_to_pfn_no_overrides() which checks the MFN is within the
mapped portion of the m2p table before accessing the table and use
this in m2p_add_override(), m2p_remove_override(), and mfn_to_pfn()
(which already had the correct range check).
All faults caused by accessing the non-existant parts of the m2p are
thus within the kernel address space and exception_fixup() is called
without trying to lock mm->mmap_sem.
This means that for MFNs that are outside the mapped range of the m2p
then mfn_to_pfn() will always look in the m2p overrides. This is
correct because it must be a foreign MFN (and the PFN in the m2p in
this case is only relevant for the other domain).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
--
v3: check for auto_translated_physmap in mfn_to_pfn_no_overrides()
v2: in mfn_to_pfn() look in m2p_overrides if the MFN is out of
range as it's probably foreign.
---
arch/x86/include/asm/xen/page.h | 31 ++++++++++++++++++++-----------
arch/x86/xen/p2m.c | 10 ++++------
2 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 6aef9fb..b913915 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -79,30 +79,38 @@ static inline int phys_to_machine_mapping_valid(unsigned long pfn)
return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY;
}
-static inline unsigned long mfn_to_pfn(unsigned long mfn)
+static inline unsigned long mfn_to_pfn_no_overrides(unsigned long mfn)
{
unsigned long pfn;
- int ret = 0;
+ int ret;
if (xen_feature(XENFEAT_auto_translated_physmap))
return mfn;
- if (unlikely(mfn >= machine_to_phys_nr)) {
- pfn = ~0;
- goto try_override;
- }
- pfn = 0;
+ if (unlikely(mfn >= machine_to_phys_nr))
+ return ~0;
+
/*
* The array access can fail (e.g., device space beyond end of RAM).
* In such cases it doesn't matter what we return (we return garbage),
* but we must handle the fault without crashing!
*/
ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
-try_override:
- /* ret might be < 0 if there are no entries in the m2p for mfn */
if (ret < 0)
- pfn = ~0;
- else if (get_phys_to_machine(pfn) != mfn)
+ return ~0;
+
+ return pfn;
+}
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+ unsigned long pfn;
+
+ if (xen_feature(XENFEAT_auto_translated_physmap))
+ return mfn;
+
+ pfn = mfn_to_pfn_no_overrides(mfn);
+ if (get_phys_to_machine(pfn) != mfn) {
/*
* If this appears to be a foreign mfn (because the pfn
* doesn't map back to the mfn), then check the local override
@@ -111,6 +119,7 @@ try_override:
* m2p_find_override_pfn returns ~0 if it doesn't find anything.
*/
pfn = m2p_find_override_pfn(mfn, ~0);
+ }
/*
* pfn is ~0 if there are no entries in the m2p for mfn or if the
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 8b901e8..a61c7d5 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -879,7 +879,6 @@ int m2p_add_override(unsigned long mfn, struct page *page,
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
- int ret = 0;
pfn = page_to_pfn(page);
if (!PageHighMem(page)) {
@@ -926,8 +925,8 @@ int m2p_add_override(unsigned long mfn, struct page *page,
* frontend pages while they are being shared with the backend,
* because mfn_to_pfn (that ends up being called by GUPF) will
* return the backend pfn rather than the frontend pfn. */
- ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
- if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+ pfn = mfn_to_pfn_no_overrides(mfn);
+ if (get_phys_to_machine(pfn) == mfn)
set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
return 0;
@@ -942,7 +941,6 @@ int m2p_remove_override(struct page *page,
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
- int ret = 0;
pfn = page_to_pfn(page);
mfn = get_phys_to_machine(pfn);
@@ -1029,8 +1027,8 @@ int m2p_remove_override(struct page *page,
* the original pfn causes mfn_to_pfn(mfn) to return the frontend
* pfn again. */
mfn &= ~FOREIGN_FRAME_BIT;
- ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
- if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+ pfn = mfn_to_pfn_no_overrides(mfn);
+ if (get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
m2p_find_override(mfn) == NULL)
set_phys_to_machine(pfn, mfn);
--
1.7.2.5
next reply other threads:[~2013-09-13 14:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-13 14:13 David Vrabel [this message]
2013-09-24 14:32 ` [PATCHv3] xen/p2m: check MFN is in range before using the m2p table Konrad Rzeszutek Wilk
2013-09-25 9:46 ` David Vrabel
2013-09-25 11:26 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379081610-27804-1-git-send-email-david.vrabel@citrix.com \
--to=david.vrabel@citrix.com \
--cc=JBeulich@suse.com \
--cc=boris.ostrovsky@oracle.com \
--cc=stefano.stabellini@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).