From: George Dunlap <george.dunlap@eu.citrix.com>
To: xen-devel@lists.xen.org
Cc: George Dunlap <george.dunlap@eu.citrix.com>,
Keir Fraser <keir@xen.org>, Tim Deegan <tim@xen.org>,
Jan Beulich <jbeulich@suse.com>
Subject: [PATCH RFC v13 13/20] pvh: Set up more PV stuff in set_info_guest
Date: Mon, 23 Sep 2013 17:49:53 +0100 [thread overview]
Message-ID: <1379955000-11050-14-git-send-email-george.dunlap@eu.citrix.com> (raw)
In-Reply-To: <1379955000-11050-1-git-send-email-george.dunlap@eu.citrix.com>
Allow the guest to set up a few more things when bringing up a vcpu.
This includes cr3 and gs_base.
Also set up wallclock, and only initialize a vcpu once.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
---
v13:
- Get rid of separate pvh call, and fold gs_base write into hvm_set_info_guest
- Check pvh parameters for validity at the top of arch_set_info_guest
- Fix comment about PVH and set_info_guest
CC: Jan Beulich <jbeulich@suse.com>
CC: Tim Deegan <tim@xen.org>
CC: Keir Fraser <keir@xen.org>
---
xen/arch/x86/domain.c | 33 +++++++++++++++++++++++++++++++--
xen/arch/x86/hvm/vmx/vmx.c | 7 ++++++-
xen/include/asm-x86/hvm/hvm.h | 6 +++---
xen/include/public/arch-x86/xen.h | 11 +++++++++++
4 files changed, 51 insertions(+), 6 deletions(-)
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index 4b4c66d..b2bb3fc 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -699,6 +699,18 @@ int arch_set_info_guest(
return -EINVAL;
}
}
+ else if ( is_pvh_vcpu(v) )
+ {
+ /* PVH 32bitfixme */
+ ASSERT(!compat);
+
+ if ( c(ctrlreg[1]) || c(ldt_base) || c(ldt_ents) ||
+ c(user_regs.cs) || c(user_regs.ss) || c(user_regs.es) ||
+ c(user_regs.ds) || c(user_regs.fs) || c(user_regs.gs) ||
+ c.nat->gdt_ents || c.nat->fs_base || c.nat->gs_base_user )
+ return -EINVAL;
+
+ }
v->fpu_initialised = !!(flags & VGCF_I387_VALID);
@@ -736,8 +748,24 @@ int arch_set_info_guest(
if ( has_hvm_container_vcpu(v) )
{
- hvm_set_info_guest(v);
- goto out;
+ hvm_set_info_guest(v, compat ? 0 : c.nat->gs_base_kernel);
+
+ if ( is_hvm_vcpu(v) || v->is_initialised )
+ goto out;
+
+ cr3_gfn = xen_cr3_to_pfn(c.nat->ctrlreg[3]);
+ cr3_page = get_page_from_gfn(d, cr3_gfn, NULL, P2M_ALLOC);
+
+ v->arch.cr3 = page_to_maddr(cr3_page);
+ v->arch.hvm_vcpu.guest_cr[3] = c.nat->ctrlreg[3];
+
+ ASSERT(paging_mode_enabled(d));
+
+ paging_update_paging_modes(v);
+
+ update_cr3(v);
+
+ goto pvh_skip_pv_stuff;
}
init_int80_direct_trap(v);
@@ -947,6 +975,7 @@ int arch_set_info_guest(
update_cr3(v);
+ pvh_skip_pv_stuff:
if ( v->vcpu_id == 0 )
update_domain_wallclock_time(d);
diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c
index 5392223..e9aa06b 100644
--- a/xen/arch/x86/hvm/vmx/vmx.c
+++ b/xen/arch/x86/hvm/vmx/vmx.c
@@ -1426,7 +1426,7 @@ static void vmx_set_uc_mode(struct vcpu *v)
hvm_asid_flush_vcpu(v);
}
-static void vmx_set_info_guest(struct vcpu *v)
+static void vmx_set_info_guest(struct vcpu *v, uint64_t gs_base_kernel)
{
unsigned long intr_shadow;
@@ -1451,6 +1451,11 @@ static void vmx_set_info_guest(struct vcpu *v)
__vmwrite(GUEST_INTERRUPTIBILITY_INFO, intr_shadow);
}
+ /* PVH 32bitfixme */
+ if ( is_pvh_vcpu(v) )
+ __vmwrite(GUEST_GS_BASE, gs_base_kernel);
+
+
vmx_vmcs_exit(v);
}
diff --git a/xen/include/asm-x86/hvm/hvm.h b/xen/include/asm-x86/hvm/hvm.h
index 9437ff7..cc401cc 100644
--- a/xen/include/asm-x86/hvm/hvm.h
+++ b/xen/include/asm-x86/hvm/hvm.h
@@ -158,7 +158,7 @@ struct hvm_function_table {
int (*msr_write_intercept)(unsigned int msr, uint64_t msr_content);
void (*invlpg_intercept)(unsigned long vaddr);
void (*set_uc_mode)(struct vcpu *v);
- void (*set_info_guest)(struct vcpu *v);
+ void (*set_info_guest)(struct vcpu *v, uint64_t gs_base_kernel);
void (*set_rdtsc_exiting)(struct vcpu *v, bool_t);
/* Nested HVM */
@@ -437,10 +437,10 @@ void *hvm_map_guest_frame_rw(unsigned long gfn, bool_t permanent);
void *hvm_map_guest_frame_ro(unsigned long gfn, bool_t permanent);
void hvm_unmap_guest_frame(void *p, bool_t permanent);
-static inline void hvm_set_info_guest(struct vcpu *v)
+static inline void hvm_set_info_guest(struct vcpu *v, uint64_t gs_base_kernel)
{
if ( hvm_funcs.set_info_guest )
- return hvm_funcs.set_info_guest(v);
+ return hvm_funcs.set_info_guest(v, gs_base_kernel);
}
int hvm_debug_op(struct vcpu *v, int32_t op);
diff --git a/xen/include/public/arch-x86/xen.h b/xen/include/public/arch-x86/xen.h
index 908ef87..42b818e 100644
--- a/xen/include/public/arch-x86/xen.h
+++ b/xen/include/public/arch-x86/xen.h
@@ -154,6 +154,17 @@ typedef uint64_t tsc_timestamp_t; /* RDTSC timestamp */
/*
* The following is all CPU context. Note that the fpu_ctxt block is filled
* in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
+ *
+ * Also note that when calling DOMCTL_setvcpucontext and VCPU_initialise
+ * for HVM and PVH guests, not all information in this structure is updated:
+ *
+ * - For HVM guests, the structures read include: fpu_ctxt (if
+ * VGCT_I387_VALID is set), flags, user_regs, debugreg[*]
+ *
+ * - PVH guests are the same as HVM guests, but additionally set cr3,
+ * and for 64-bit guests, gs_base_kernel. Additionally, the following
+ * entries must be 0: ctrlreg[1], ldt_base, ldg_ents, user_regs.{cs,
+ * ss, es, ds, fs, gs), gdt_ents, fs_base, and gs_base_user.
*/
struct vcpu_guest_context {
/* FPU registers come first so they can be aligned for FXSAVE/FXRSTOR. */
--
1.7.9.5
next prev parent reply other threads:[~2013-09-23 16:49 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-23 16:49 [PATCH RFC v13 00/20] Introduce PVH domU support George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 01/20] Allow vmx_update_debug_state to be called when v!=current George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 02/20] pvh prep: code motion George Dunlap
2013-09-26 9:20 ` Tim Deegan
2013-10-04 15:29 ` Roger Pau Monné
2013-09-23 16:49 ` [PATCH RFC v13 03/20] Introduce pv guest type and has_hvm_container macros George Dunlap
2013-09-26 11:53 ` Tim Deegan
2013-09-26 12:54 ` Ian Campbell
2013-09-26 13:46 ` George Dunlap
2013-09-26 15:31 ` Konrad Rzeszutek Wilk
2013-09-26 16:24 ` Tim Deegan
2013-09-23 16:49 ` [PATCH RFC v13 04/20] pvh: Introduce PVH guest type George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 05/20] pvh: Disable unneeded features of HVM containers George Dunlap
2013-09-26 15:22 ` Jan Beulich
2013-11-04 12:31 ` George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 06/20] pvh: vmx-specific changes George Dunlap
2013-09-26 15:29 ` Jan Beulich
2013-11-07 14:14 ` George Dunlap
2013-11-07 14:29 ` Jan Beulich
2013-10-07 15:55 ` Roger Pau Monné
2013-10-07 16:06 ` George Dunlap
2013-10-07 16:12 ` Tim Deegan
2013-10-07 16:20 ` George Dunlap
2013-10-07 17:08 ` Tim Deegan
2013-10-08 8:45 ` Jan Beulich
2013-11-07 12:02 ` George Dunlap
2013-11-07 13:12 ` Jan Beulich
2013-09-23 16:49 ` [PATCH RFC v13 07/20] pvh: Do not allow PVH guests to change paging modes George Dunlap
2013-09-26 15:30 ` Jan Beulich
2013-09-23 16:49 ` [PATCH RFC v13 08/20] pvh: PVH access to hypercalls George Dunlap
2013-09-26 15:33 ` Jan Beulich
2013-09-27 21:15 ` Mukesh Rathor
2013-09-30 6:38 ` Jan Beulich
2013-09-23 16:49 ` [PATCH RFC v13 09/20] pvh: Use PV e820 George Dunlap
2013-09-27 17:57 ` Konrad Rzeszutek Wilk
2013-09-23 16:49 ` [PATCH RFC v13 10/20] pvh: Support guest_kernel_mode for PVH George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 11/20] pvh: Support read_segment_register " George Dunlap
2013-09-26 15:36 ` Jan Beulich
2013-09-23 16:49 ` [PATCH RFC v13 12/20] pvh: read_descriptor for PVH guests George Dunlap
2013-09-27 18:34 ` Konrad Rzeszutek Wilk
2013-09-23 16:49 ` George Dunlap [this message]
2013-09-26 15:43 ` [PATCH RFC v13 13/20] pvh: Set up more PV stuff in set_info_guest Jan Beulich
2013-11-07 15:57 ` George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 14/20] pvh: Use PV handlers for emulated forced invalid ops, cpuid, and IO George Dunlap
2013-09-26 15:52 ` Jan Beulich
2013-09-23 16:49 ` [PATCH RFC v13 15/20] pvh: Disable 32-bit guest support for now George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 16/20] pvh: Restrict tsc_mode to NEVER_EMULATE " George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 17/20] pvh: Disable debug traps when doing pv emulation for PVH domains George Dunlap
2013-09-26 15:55 ` Jan Beulich
2013-09-23 16:49 ` [PATCH RFC v13 18/20] pvh: Documentation George Dunlap
2013-09-23 16:49 ` [PATCH RFC v13 19/20] PVH xen tools: libxc changes to build a PVH guest George Dunlap
2013-09-27 18:37 ` Konrad Rzeszutek Wilk
2013-10-18 16:45 ` Roger Pau Monné
2013-11-04 11:56 ` George Dunlap
2013-11-04 13:18 ` Roger Pau Monné
2013-09-23 16:50 ` [PATCH RFC v13 20/20] PVH xen tools: libxl changes to create " George Dunlap
2013-09-27 18:38 ` Konrad Rzeszutek Wilk
2013-09-27 13:08 ` [PATCH RFC v13 00/20] Introduce PVH domU support Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379955000-11050-14-git-send-email-george.dunlap@eu.citrix.com \
--to=george.dunlap@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=keir@xen.org \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).