From: Ian Campbell <ian.campbell@citrix.com>
To: xen-devel@lists.xen.org
Cc: julien.grall@linaro.org, tim@xen.org,
Ian Campbell <ian.campbell@citrix.com>,
stefano.stabellini@eu.citrix.com
Subject: [PATCH v3 06/11] xen: arm: implement arch/platform SMP and CPU initialisation framework
Date: Fri, 27 Sep 2013 11:20:35 +0100 [thread overview]
Message-ID: <1380277240-27900-6-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1380276965.29483.178.camel@kazak.uk.xensource.com>
Includes an implementation for vexpress using the sysflags interface and
support for the ARMv8 "spin-table" method.
Unused until the next patch, split out to simplify review.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Julien Grall <julien.grall@linaro.org>
---
xen/arch/arm/arm32/Makefile | 1 +
xen/arch/arm/arm32/head.S | 2 +-
xen/arch/arm/arm32/smpboot.c | 29 ++++++++++++
xen/arch/arm/arm64/Makefile | 1 +
xen/arch/arm/arm64/head.S | 1 +
xen/arch/arm/arm64/smpboot.c | 89 +++++++++++++++++++++++++++++++++++++
xen/arch/arm/platform.c | 18 ++++++++
xen/arch/arm/platforms/vexpress.c | 38 ++++++++++++++++
xen/include/asm-arm/platform.h | 9 ++++
xen/include/asm-arm/smp.h | 9 ++++
10 files changed, 196 insertions(+), 1 deletion(-)
create mode 100644 xen/arch/arm/arm32/smpboot.c
create mode 100644 xen/arch/arm/arm64/smpboot.c
diff --git a/xen/arch/arm/arm32/Makefile b/xen/arch/arm/arm32/Makefile
index 18522dc..463b1f5 100644
--- a/xen/arch/arm/arm32/Makefile
+++ b/xen/arch/arm/arm32/Makefile
@@ -7,5 +7,6 @@ obj-y += proc-v7.o
obj-y += traps.o
obj-y += domain.o
obj-y += vfp.o
+obj-y += smpboot.o
obj-$(EARLY_PRINTK) += debug.o
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index fce18a2..8cb31a2 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -59,7 +59,7 @@
* or the initial pagetable code below will need adjustment. */
.global start
start:
-
+GLOBAL(init_secondary) /* currently unused */
/* zImage magic header, see:
* http://www.simtec.co.uk/products/SWLINUX/files/booting_article.html#d0e309
*/
diff --git a/xen/arch/arm/arm32/smpboot.c b/xen/arch/arm/arm32/smpboot.c
new file mode 100644
index 0000000..88fe8fb
--- /dev/null
+++ b/xen/arch/arm/arm32/smpboot.c
@@ -0,0 +1,29 @@
+#include <xen/device_tree.h>
+#include <xen/init.h>
+#include <xen/smp.h>
+#include <asm/platform.h>
+
+int __init arch_smp_init(void)
+{
+ return platform_smp_init();
+}
+
+int __init arch_cpu_init(int cpu, struct dt_device_node *dn)
+{
+ /* TODO handle PSCI init */
+ return 0;
+}
+
+int __init arch_cpu_up(int cpu)
+{
+ return platform_cpu_up(cpu);
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/arch/arm/arm64/Makefile b/xen/arch/arm/arm64/Makefile
index e06a0a9..30fb480 100644
--- a/xen/arch/arm/arm64/Makefile
+++ b/xen/arch/arm/arm64/Makefile
@@ -6,5 +6,6 @@ obj-y += mode_switch.o
obj-y += traps.o
obj-y += domain.o
obj-y += vfp.o
+obj-y += smpboot.o
obj-$(EARLY_PRINTK) += debug.o
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 4495f72..7cecac3 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -65,6 +65,7 @@
.global start
start:
+GLOBAL(init_secondary) /* currently unused */
/*
* DO NOT MODIFY. Image header expected by Linux boot-loaders.
*/
diff --git a/xen/arch/arm/arm64/smpboot.c b/xen/arch/arm/arm64/smpboot.c
new file mode 100644
index 0000000..8239590
--- /dev/null
+++ b/xen/arch/arm/arm64/smpboot.c
@@ -0,0 +1,89 @@
+#include <xen/cpu.h>
+#include <xen/lib.h>
+#include <xen/init.h>
+#include <xen/errno.h>
+#include <xen/mm.h>
+#include <xen/smp.h>
+
+struct smp_enable_ops {
+ int (*prepare_cpu)(int);
+};
+
+static paddr_t cpu_release_addr[NR_CPUS];
+static struct smp_enable_ops smp_enable_ops[NR_CPUS];
+
+static int __init smp_spin_table_cpu_up(int cpu)
+{
+ paddr_t *release;
+
+ if (!cpu_release_addr[cpu])
+ {
+ printk("CPU%d: No release addr\n", cpu);
+ return -ENODEV;
+ }
+
+ release = __va(cpu_release_addr[cpu]);
+
+ release[0] = __pa(init_secondary);
+ flush_xen_data_tlb_range_va((vaddr_t)release, sizeof(*release));
+
+ sev();
+ return 0;
+}
+
+static void __init smp_spin_table_init(int cpu, struct dt_device_node *dn)
+{
+ if ( !dt_property_read_u64(dn, "cpu-release-addr", &cpu_release_addr[cpu]) )
+ {
+ printk("CPU%d has no cpu-release-addr\n", cpu);
+ return;
+ }
+
+ smp_enable_ops[cpu].prepare_cpu = smp_spin_table_cpu_up;
+}
+
+int __init arch_smp_init(void)
+{
+ /* Nothing */
+ return 0;
+}
+
+int __init arch_cpu_init(int cpu, struct dt_device_node *dn)
+{
+ const char *enable_method;
+
+ enable_method = dt_get_property(dn, "enable-method", NULL);
+ if (!enable_method)
+ {
+ printk("CPU%d has no enable method\n", cpu);
+ return -EINVAL;
+ }
+
+ if ( !strcmp(enable_method, "spin-table") )
+ smp_spin_table_init(cpu, dn);
+ /* TODO: method "psci" */
+ else
+ {
+ printk("CPU%d has unknown enable method \"%s\"\n", cpu, enable_method);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int __init arch_cpu_up(int cpu)
+{
+ if ( !smp_enable_ops[cpu].prepare_cpu )
+ return -ENODEV;
+
+ return smp_enable_ops[cpu].prepare_cpu(cpu);
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/arch/arm/platform.c b/xen/arch/arm/platform.c
index db79368..db135f8 100644
--- a/xen/arch/arm/platform.c
+++ b/xen/arch/arm/platform.c
@@ -105,6 +105,24 @@ int __init platform_specific_mapping(struct domain *d)
return res;
}
+#ifdef CONFIG_ARM_32
+int __init platform_cpu_up(int cpu)
+{
+ if ( platform && platform->cpu_up )
+ return platform->cpu_up(cpu);
+
+ return -EAGAIN;
+}
+
+int __init platform_smp_init(void)
+{
+ if ( platform && platform->smp_init )
+ return platform->smp_init();
+
+ return 0;
+}
+#endif
+
void platform_reset(void)
{
if ( platform && platform->reset )
diff --git a/xen/arch/arm/platforms/vexpress.c b/xen/arch/arm/platforms/vexpress.c
index 22c0c13..be0516f 100644
--- a/xen/arch/arm/platforms/vexpress.c
+++ b/xen/arch/arm/platforms/vexpress.c
@@ -22,6 +22,7 @@
#include <xen/mm.h>
#include <xen/vmap.h>
#include <asm/io.h>
+#include <asm/gic.h>
#define DCC_SHIFT 26
#define FUNCTION_SHIFT 20
@@ -120,6 +121,39 @@ static void vexpress_reset(void)
iounmap(sp810);
}
+#ifdef CONFIG_ARM_32
+
+static int vexpress_smp_init(void)
+{
+ void __iomem *sysflags;
+
+ sysflags = ioremap_nocache(V2M_SYS_MMIO_BASE, PAGE_SIZE);
+ if ( !sysflags )
+ {
+ dprintk(XENLOG_ERR, "Unable to map vexpress MMIO\n");
+ return -EFAULT;
+ }
+
+ printk("Set SYS_FLAGS to %"PRIpaddr" (%p)\n",
+ __pa(init_secondary), init_secondary);
+ writel(~0, sysflags + V2M_SYS_FLAGSCLR);
+ writel(__pa(init_secondary), sysflags + V2M_SYS_FLAGSSET);
+
+ iounmap(sysflags);
+
+ return 0;
+}
+
+static int vexpress_cpu_up(int cpu)
+{
+ /* Nothing to do here, the generic sev() will suffice to kick CPUs
+ * out of either the firmware or our own smp_up_cpu gate,
+ * depending on where they have ended up. */
+
+ return 0;
+}
+#endif
+
static const char * const vexpress_dt_compat[] __initdata =
{
"arm,vexpress",
@@ -144,6 +178,10 @@ static const struct dt_device_match vexpress_blacklist_dev[] __initconst =
PLATFORM_START(vexpress, "VERSATILE EXPRESS")
.compatible = vexpress_dt_compat,
+#ifdef CONFIG_ARM_32
+ .smp_init = vexpress_smp_init,
+ .cpu_up = vexpress_cpu_up,
+#endif
.reset = vexpress_reset,
.blacklist_dev = vexpress_blacklist_dev,
PLATFORM_END
diff --git a/xen/include/asm-arm/platform.h b/xen/include/asm-arm/platform.h
index a19dbf7..dbd2a15 100644
--- a/xen/include/asm-arm/platform.h
+++ b/xen/include/asm-arm/platform.h
@@ -15,6 +15,11 @@ struct platform_desc {
/* Platform initialization */
int (*init)(void);
int (*init_time)(void);
+#ifdef CONFIG_ARM_32
+ /* SMP */
+ int (*smp_init)(void);
+ int (*cpu_up)(int cpu);
+#endif
/* Specific mapping for dom0 */
int (*specific_mapping)(struct domain *d);
/* Platform reset */
@@ -43,6 +48,10 @@ struct platform_desc {
int __init platform_init(void);
int __init platform_init_time(void);
int __init platform_specific_mapping(struct domain *d);
+#ifdef CONFIG_ARM_32
+int platform_smp_init(void);
+int platform_cpu_up(int cpu);
+#endif
void platform_reset(void);
void platform_poweroff(void);
bool_t platform_has_quirk(uint32_t quirk);
diff --git a/xen/include/asm-arm/smp.h b/xen/include/asm-arm/smp.h
index 1c2746b..1added5 100644
--- a/xen/include/asm-arm/smp.h
+++ b/xen/include/asm-arm/smp.h
@@ -4,6 +4,7 @@
#ifndef __ASSEMBLY__
#include <xen/config.h>
#include <xen/cpumask.h>
+#include <xen/device_tree.h>
#include <asm/current.h>
#endif
@@ -22,9 +23,17 @@ extern void stop_cpu(void);
extern void
make_cpus_ready(unsigned int max_cpus, unsigned long boot_phys_offset);
+extern int arch_smp_init(void);
+extern int arch_cpu_init(int cpu, struct dt_device_node *dn);
+extern int arch_cpu_up(int cpu);
+
+/* Secondary CPU entry point */
+extern void init_secondary(void);
+
extern void smp_clear_cpu_maps (void);
extern int smp_get_max_cpus (void);
#endif
+
/*
* Local variables:
* mode: C
--
1.7.10.4
next prev parent reply other threads:[~2013-09-27 10:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 10:16 [PATCH v3 00/11] xen: arm: rework early bring up Ian Campbell
2013-09-27 10:20 ` [PATCH v3 01/11] xen: arm: Load xen under 4GB on 32-bit Ian Campbell
2013-09-27 10:20 ` [PATCH v3 02/11] xen: arm: build platform support only on the relevant arch Ian Campbell
2013-09-27 12:19 ` Julien Grall
2013-09-27 10:20 ` [PATCH v3 03/11] xen: arm: Log the raw MIDR on boot Ian Campbell
2013-09-27 10:20 ` [PATCH v3 04/11] xen: arm: make sure we stay within the memory bank during mm setup Ian Campbell
2013-09-27 10:20 ` [PATCH v3 05/11] xen: arm: add two new device tree helpers Ian Campbell
2013-09-27 10:20 ` Ian Campbell [this message]
2013-09-27 12:23 ` [PATCH v3 06/11] xen: arm: implement arch/platform SMP and CPU initialisation framework Julien Grall
2013-09-27 12:35 ` Ian Campbell
2013-09-27 10:20 ` [PATCH v3 07/11] xen: arm: implement smp initialisation callbacks for exynos5 Ian Campbell
2013-09-27 10:20 ` [PATCH v3 08/11] xen: arm: rewrite start of day page table and cpu bring up Ian Campbell
2013-09-27 12:30 ` Julien Grall
2013-09-27 12:37 ` Ian Campbell
2013-09-27 13:30 ` Julien Grall
2013-09-27 14:10 ` Ian Campbell
2013-09-27 14:21 ` Julien Grall
2013-09-27 14:23 ` Ian Campbell
2013-09-27 14:26 ` Ian Campbell
2013-09-27 14:21 ` Ian Campbell
2013-09-27 14:31 ` Julien Grall
2013-09-27 14:38 ` Ian Campbell
2013-09-27 15:17 ` Ian Campbell
2013-09-27 15:30 ` Julien Grall
2013-09-27 15:52 ` Ian Campbell
2013-09-27 10:20 ` [PATCH v3 09/11] xen: arm: use symbolic names for MPIDR bits Ian Campbell
2013-09-27 10:20 ` [PATCH v3 10/11] xen: arm: configure TCR_EL2 for 40 bit physical address space Ian Campbell
2013-09-27 10:20 ` [PATCH v3 11/11] xen: arm: split cpu0's domheap mapping PTs out from xen_second Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380277240-27900-6-git-send-email-ian.campbell@citrix.com \
--to=ian.campbell@citrix.com \
--cc=julien.grall@linaro.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).