From: "Jon Fraser" <jfraser@broadcom.com>
To: xen-devel@lists.xen.org
Cc: andrew.cooper3@citrix.com, julien.grall@linaro.org,
ian.campbell@citrix.com, Jon Fraser <jfraser@broadcom.com>
Subject: [PATCH V3] xen/arm: UART addresses are not always aligned to a page.
Date: Thu, 31 Oct 2013 15:37:38 -0400 [thread overview]
Message-ID: <1383248258-1965-1-git-send-email-jfraser@broadcom.com> (raw)
In-Reply-To: <1383236842.25018.130.camel@dagon.hellion.org.uk>
When calculating the virtual address of the UART,
add the page offset of the UART to the mapped address.
Create define EARLY_UART_VIRTUAL_ADDRESS and use instead
of FIXMAP_ADDR(FIXMAP_CONSOLE)
Signed-off-by: Jon Fraser <jfraser@broadcom.com>
---
xen/arch/arm/arm32/debug.S | 5 +++--
xen/arch/arm/arm32/head.S | 3 ++-
xen/arch/arm/arm64/debug.S | 5 +++--
xen/arch/arm/arm64/head.S | 3 ++-
xen/include/asm-arm/early_printk.h | 12 ++++++++++++
5 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/xen/arch/arm/arm32/debug.S b/xen/arch/arm/arm32/debug.S
index ec774cd..a95d9da 100644
--- a/xen/arch/arm/arm32/debug.S
+++ b/xen/arch/arm/arm32/debug.S
@@ -18,6 +18,7 @@
*/
#include <asm/config.h>
+#include <asm/early_printk.h>
#ifdef EARLY_PRINTK_INC
#include EARLY_PRINTK_INC
@@ -26,14 +27,14 @@
/* Print a character on the UART - this function is called by C
* r0: character to print */
GLOBAL(early_putch)
- ldr r1, =FIXMAP_ADDR(FIXMAP_CONSOLE) /* r1 := VA UART base address */
+ ldr r1, =EARLY_UART_VIRTUAL_ADDRESS /* r1 := VA UART base address */
early_uart_ready r1, r2
early_uart_transmit r1, r0
mov pc, lr
/* Flush the UART - this function is called by C */
GLOBAL(early_flush)
- ldr r1, =FIXMAP_ADDR(FIXMAP_CONSOLE) /* r1 := VA UART base address */
+ ldr r1, =EARLY_UART_VIRTUAL_ADDRESS /* r1 := VA UART base address */
early_uart_ready r1, r2
mov pc, lr
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index ce1d21a..96230ac 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -22,6 +22,7 @@
#include <asm/processor-ca15.h>
#include <asm/processor-ca7.h>
#include <asm/asm_defns.h>
+#include <asm/early_printk.h>
#define ZIMAGE_MAGIC_NUMBER 0x016f2818
@@ -356,7 +357,7 @@ paging:
strd r2, r3, [r1, r4] /* Map it in the fixmap's slot */
/* Use a virtual address to access the UART. */
- ldr r11, =FIXMAP_ADDR(FIXMAP_CONSOLE)
+ ldr r11, =EARLY_UART_VIRTUAL_ADDRESS
#endif
/* Map the DTB in the boot misc slot */
teq r12, #0 /* Only on boot CPU */
diff --git a/xen/arch/arm/arm64/debug.S b/xen/arch/arm/arm64/debug.S
index 472c157..a855358 100644
--- a/xen/arch/arm/arm64/debug.S
+++ b/xen/arch/arm/arm64/debug.S
@@ -18,6 +18,7 @@
*/
#include <asm/config.h>
+#include <asm/early_printk.h>
#ifdef EARLY_PRINTK_INC
#include EARLY_PRINTK_INC
@@ -26,14 +27,14 @@
/* Print a character on the UART - this function is called by C
* x0: character to print */
GLOBAL(early_putch)
- ldr x15, =FIXMAP_ADDR(FIXMAP_CONSOLE)
+ ldr x15, =EARLY_UART_VIRTUAL_ADDRESS
early_uart_ready x15, 1
early_uart_transmit x15, w0
ret
/* Flush the UART - this function is called by C */
GLOBAL(early_flush)
- ldr x15, =FIXMAP_ADDR(FIXMAP_CONSOLE) /* x15 := VA UART base address */
+ ldr x15, =EARLY_UART_VIRTUAL_ADDRESS /* x15 := VA UART base address */
early_uart_ready x15, 1
ret
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index b8b5902..31afdd0 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -23,6 +23,7 @@
#include <asm/config.h>
#include <asm/page.h>
#include <asm/asm_defns.h>
+#include <asm/early_printk.h>
#define PT_PT 0xe7f /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=111 T=1 P=1 */
#define PT_MEM 0xe7d /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=111 T=0 P=1 */
@@ -368,7 +369,7 @@ paging:
str x2, [x4, x1] /* Map it in the fixmap's slot */
/* Use a virtual address to access the UART. */
- ldr x23, =FIXMAP_ADDR(FIXMAP_CONSOLE)
+ ldr x23, =EARLY_UART_VIRTUAL_ADDRESS
#endif
/* Map the DTB in the boot misc slot */
diff --git a/xen/include/asm-arm/early_printk.h b/xen/include/asm-arm/early_printk.h
index 5f7c529..707bbf7 100644
--- a/xen/include/asm-arm/early_printk.h
+++ b/xen/include/asm-arm/early_printk.h
@@ -14,6 +14,16 @@
#ifdef EARLY_PRINTK
+/* need to add the uart address offset in page to the fixmap address */
+#define EARLY_UART_VIRTUAL_ADDRESS \
+ (FIXMAP_ADDR(FIXMAP_CONSOLE) +(EARLY_UART_BASE_ADDRESS & ~PAGE_MASK))
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef EARLY_PRINTK
+
void early_printk(const char *fmt, ...)
__attribute__((format (printf, 1, 2)));
void early_panic(const char *fmt, ...) __attribute__((noreturn))
@@ -31,4 +41,6 @@ __attribute__((format (printf, 1, 2))) early_panic(const char *fmt, ...)
#endif
+#endif /* __ASSEMBLY__ */
+
#endif
--
1.7.11.3
next prev parent reply other threads:[~2013-10-31 19:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-30 21:18 [PATCH V2] xen/arm: UART addresses are not always aligned to a page Jon Fraser
2013-10-30 21:25 ` Andrew Cooper
2013-10-30 22:53 ` Jon Fraser
2013-10-31 16:27 ` Ian Campbell
2013-10-31 19:37 ` Jon Fraser [this message]
2013-10-31 19:52 ` [PATCH V3] " Ian Campbell
2013-10-31 20:11 ` Jon Fraser
2013-10-31 20:47 ` Ian Campbell
2013-11-01 13:24 ` Ian Campbell
2013-10-30 23:09 ` [PATCH V2] " Julien Grall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383248258-1965-1-git-send-email-jfraser@broadcom.com \
--to=jfraser@broadcom.com \
--cc=andrew.cooper3@citrix.com \
--cc=ian.campbell@citrix.com \
--cc=julien.grall@linaro.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).