* [PATCH] xen/arm: Add EARLY_PRINT support for Broadcom brcm platform.
@ 2013-10-29 1:50 Jon Fraser
2013-10-31 15:07 ` Ian Campbell
0 siblings, 1 reply; 4+ messages in thread
From: Jon Fraser @ 2013-10-29 1:50 UTC (permalink / raw)
To: xen-devel; +Cc: julien.grall, Jon Fraser, stefano.stabellini
Enable early print support for the Broadcom A15 platform, brcm.
Signed-off-by: Jon Fraser <jfraser@broadcom.com>
---
xen/arch/arm/Rules.mk | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index bd79b26..c27c2eb 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -77,6 +77,11 @@ EARLY_PRINTK_INC := 8250
EARLY_UART_BASE_ADDRESS := 0x01c28000
EARLY_UART_REG_SHIFT := 2
endif
+ifeq ($(CONFIG_EARLY_PRINTK), brcm)
+EARLY_PRINTK_INC := 8250
+EARLY_UART_BASE_ADDRESS := 0xF0406B00
+EARLY_UART_REG_SHIFT := 2
+endif
ifneq ($(EARLY_PRINTK_INC),)
EARLY_PRINTK := y
--
1.7.11.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] xen/arm: Add EARLY_PRINT support for Broadcom brcm platform.
2013-10-29 1:50 [PATCH] xen/arm: Add EARLY_PRINT support for Broadcom brcm platform Jon Fraser
@ 2013-10-31 15:07 ` Ian Campbell
2013-10-31 19:39 ` Jon Fraser
0 siblings, 1 reply; 4+ messages in thread
From: Ian Campbell @ 2013-10-31 15:07 UTC (permalink / raw)
To: Jon Fraser; +Cc: julien.grall, stefano.stabellini, xen-devel
On Mon, 2013-10-28 at 21:50 -0400, Jon Fraser wrote:
> Enable early print support for the Broadcom A15 platform, brcm.
>
> Signed-off-by: Jon Fraser <jfraser@broadcom.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I suppose this relies on your other patch to handle UARTs which are
offset into the page to be functional but it is harmless (at least to !
brcm) platforms until then?
> ---
> xen/arch/arm/Rules.mk | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
> index bd79b26..c27c2eb 100644
> --- a/xen/arch/arm/Rules.mk
> +++ b/xen/arch/arm/Rules.mk
> @@ -77,6 +77,11 @@ EARLY_PRINTK_INC := 8250
> EARLY_UART_BASE_ADDRESS := 0x01c28000
> EARLY_UART_REG_SHIFT := 2
> endif
> +ifeq ($(CONFIG_EARLY_PRINTK), brcm)
> +EARLY_PRINTK_INC := 8250
> +EARLY_UART_BASE_ADDRESS := 0xF0406B00
> +EARLY_UART_REG_SHIFT := 2
> +endif
>
> ifneq ($(EARLY_PRINTK_INC),)
> EARLY_PRINTK := y
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] xen/arm: Add EARLY_PRINT support for Broadcom brcm platform.
2013-10-31 15:07 ` Ian Campbell
@ 2013-10-31 19:39 ` Jon Fraser
2013-11-01 13:25 ` Ian Campbell
0 siblings, 1 reply; 4+ messages in thread
From: Jon Fraser @ 2013-10-31 19:39 UTC (permalink / raw)
To: Ian Campbell; +Cc: stefano.stabellini, jfraser, julien.grall, xen-devel
Yes, it's harmless to the other platforms. Verified with test builds.
Jon
On Thu, 2013-10-31 at 15:07 +0000, Ian Campbell wrote:
> On Mon, 2013-10-28 at 21:50 -0400, Jon Fraser wrote:
> > Enable early print support for the Broadcom A15 platform, brcm.
> >
> > Signed-off-by: Jon Fraser <jfraser@broadcom.com>
>
> Acked-by: Ian Campbell <ian.campbell@citrix.com>
>
> I suppose this relies on your other patch to handle UARTs which are
> offset into the page to be functional but it is harmless (at least to !
> brcm) platforms until then?
>
> > ---
> > xen/arch/arm/Rules.mk | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
> > index bd79b26..c27c2eb 100644
> > --- a/xen/arch/arm/Rules.mk
> > +++ b/xen/arch/arm/Rules.mk
> > @@ -77,6 +77,11 @@ EARLY_PRINTK_INC := 8250
> > EARLY_UART_BASE_ADDRESS := 0x01c28000
> > EARLY_UART_REG_SHIFT := 2
> > endif
> > +ifeq ($(CONFIG_EARLY_PRINTK), brcm)
> > +EARLY_PRINTK_INC := 8250
> > +EARLY_UART_BASE_ADDRESS := 0xF0406B00
> > +EARLY_UART_REG_SHIFT := 2
> > +endif
> >
> > ifneq ($(EARLY_PRINTK_INC),)
> > EARLY_PRINTK := y
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-11-01 13:25 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-29 1:50 [PATCH] xen/arm: Add EARLY_PRINT support for Broadcom brcm platform Jon Fraser
2013-10-31 15:07 ` Ian Campbell
2013-10-31 19:39 ` Jon Fraser
2013-11-01 13:25 ` Ian Campbell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).