xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Ian Campbell <ian.campbell@citrix.com>
To: xen-devel@lists.xen.org
Cc: julien.grall@linaro.org, tim@xen.org,
	Ian Campbell <ian.campbell@citrix.com>,
	stefano.stabellini@eu.citrix.com
Subject: [PATCH v6 03/16] xen: arm: move dom0 gic and timer device tree nodes under /xen-core-devices/
Date: Tue, 19 Nov 2013 13:00:11 +0000	[thread overview]
Message-ID: <1384866024-13108-3-git-send-email-ian.campbell@citrix.com> (raw)
In-Reply-To: <1384865949.30014.86.camel@kazak.uk.xensource.com>

Julien observed that we were relying on the provided host DTB supplying
suitable #address-cells and #size-cells values to allow us to represent these
addresses, which may not reliably be the case. Moving these under our own
known (somewhat analogous to the use of /soc/ or /motherboard/ on some
platforms) allows us to control these sizes.

Since the new node is created out of thin air it does not have a corresponding
struct dt_device_node and therefore we cannot use dt_n_addr_cells or
dt_n_size_cells, we can use hardcoded constants instead. For the same reason
we define and use set_xen_range instead of dt_set_range.

The hypervisor, cpus and psci node all either defined #foo-cells for their
children or do not contain reg properties and therefore can remain at the top
level.

The logging in make_gic_node was inconsistent. Fix it.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
---
v6: Use xen-core-devices node
v5: New patch
---
 xen/arch/arm/domain_build.c |   76 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 61 insertions(+), 15 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 186746c..e574fb0 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -48,6 +48,24 @@ custom_param("dom0_mem", parse_dom0_mem);
  */
 #define DOM0_FDT_EXTRA_SIZE (128 + sizeof(struct fdt_reserve_entry))
 
+/*
+ * Number of cells used for addresses and sizes under the /xen/
+ * node.
+ *
+ * We don't have a struct dt_device_node we can reference as a parent
+ * to get these values, so use these constants instead.
+ */
+#define XEN_FDT_NODE_ADDRESS_CELLS 2
+#define XEN_FDT_NODE_SIZE_CELLS 2
+#define XEN_FDT_NODE_REG_SIZE \
+    dt_cells_to_size(XEN_FDT_NODE_ADDRESS_CELLS + XEN_FDT_NODE_SIZE_CELLS)
+
+static void set_xen_range(__be32 **cellp, u64 address, u64 size)
+{
+    dt_set_cell(cellp, XEN_FDT_NODE_ADDRESS_CELLS, address);
+    dt_set_cell(cellp, XEN_FDT_NODE_SIZE_CELLS, size);
+}
+
 struct vcpu *__init alloc_dom0_vcpu0(void)
 {
     if ( opt_dom0_max_vcpus == 0 )
@@ -477,8 +495,7 @@ static int make_cpus_node(const struct domain *d, void *fdt,
     return res;
 }
 
-static int make_gic_node(const struct domain *d, void *fdt,
-                         const struct dt_device_node *parent)
+static int make_gic_node(const struct domain *d, void *fdt)
 {
     const struct dt_device_node *gic = dt_interrupt_controller;
     const void *compatible = NULL;
@@ -512,20 +529,19 @@ static int make_gic_node(const struct domain *d, void *fdt,
     if ( res )
         return res;
 
-    len = dt_cells_to_size(dt_n_addr_cells(parent) + dt_n_size_cells(parent));
-    len *= 2;
-    new_cells = xzalloc_bytes(dt_cells_to_size(len));
+    len = XEN_FDT_NODE_REG_SIZE * 2;
+    new_cells = xzalloc_bytes(len);
     if ( new_cells == NULL )
         return -FDT_ERR_XEN(ENOMEM);
 
     tmp = new_cells;
     DPRINT("  Set Distributor Base 0x%"PRIpaddr"-0x%"PRIpaddr"\n",
            d->arch.vgic.dbase, d->arch.vgic.dbase + PAGE_SIZE - 1);
-    dt_set_range(&tmp, parent, d->arch.vgic.dbase, PAGE_SIZE);
+    set_xen_range(&tmp, d->arch.vgic.dbase, PAGE_SIZE);
 
-    DPRINT("  Set Cpu Base 0x%"PRIpaddr" size = 0x%"PRIpaddr"\n",
+    DPRINT("  Set Cpu Base 0x%"PRIpaddr"-0x%"PRIpaddr"\n",
            d->arch.vgic.cbase, d->arch.vgic.cbase + (PAGE_SIZE * 2) - 1);
-    dt_set_range(&tmp, parent, d->arch.vgic.cbase, PAGE_SIZE * 2);
+    set_xen_range(&tmp, d->arch.vgic.cbase, PAGE_SIZE * 2);
 
     res = fdt_property(fdt, "reg", new_cells, len);
     xfree(new_cells);
@@ -550,8 +566,7 @@ static int make_gic_node(const struct domain *d, void *fdt,
     return res;
 }
 
-static int make_timer_node(const struct domain *d, void *fdt,
-                           const struct dt_device_node *parent)
+static int make_timer_node(const struct domain *d, void *fdt)
 {
     static const struct dt_device_match timer_ids[] __initconst =
     {
@@ -611,6 +626,41 @@ static int make_timer_node(const struct domain *d, void *fdt,
     return res;
 }
 
+static int make_xen_node(const struct domain *d, void *fdt,
+                         const struct dt_device_node *parent)
+{
+    int res;
+
+    res = fdt_begin_node(fdt, "xen-core-devices");
+    if ( res )
+        return res;
+
+    res = fdt_property_cell(fdt, "#address-cells",
+                            XEN_FDT_NODE_ADDRESS_CELLS);
+    if ( res )
+        return res;
+
+    res = fdt_property_cell(fdt, "#size-cells",
+                            XEN_FDT_NODE_SIZE_CELLS);
+    if ( res )
+        return res;
+
+    res = fdt_property(fdt, "ranges", NULL, 0);
+    if ( res )
+        return res;
+
+    res = make_gic_node(d, fdt);
+    if ( res )
+        return res;
+
+    res = make_timer_node(d, fdt);
+    if ( res )
+        return res;
+
+    res = fdt_end_node(fdt);
+    return res;
+}
+
 /* Map the device in the domain */
 static int map_device(struct domain *d, const struct dt_device_node *dev)
 {
@@ -776,11 +826,7 @@ static int handle_node(struct domain *d, struct kernel_info *kinfo,
         if ( res )
             return res;
 
-        res = make_gic_node(d, kinfo->fdt, np);
-        if ( res )
-            return res;
-
-        res = make_timer_node(d, kinfo->fdt, np);
+        res = make_xen_node(d, kinfo->fdt, np);
         if ( res )
             return res;
     }
-- 
1.7.10.4

  parent reply	other threads:[~2013-11-19 13:00 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-19 12:59 [PATCH v6 00/16] xen: arm: 64-bit guest support and domU FDT autogeneration Ian Campbell
2013-11-19 13:00 ` [PATCH v6 01/16] xen: arm: Report aarch64 capability Ian Campbell
2013-11-19 13:00 ` [PATCH v6 02/16] xen: arm: Add comment regard arm64 zImage v0 vs v1 Ian Campbell
2013-11-19 13:00 ` Ian Campbell [this message]
2013-11-19 14:05   ` [PATCH v6 03/16] xen: arm: move dom0 gic and timer device tree nodes under /xen-core-devices/ Stefano Stabellini
2013-11-19 16:29   ` Julien Grall
2013-11-19 13:00 ` [PATCH v6 04/16] xen: arm: allocate dom0 memory separately from preparing the dtb Ian Campbell
2013-11-19 16:32   ` Julien Grall
2013-11-19 13:00 ` [PATCH v6 05/16] xen: arm: add enable-method to cpu nodes for arm64 guests Ian Campbell
2013-11-19 13:00 ` [PATCH v6 06/16] xen: arm: include header for for arch_do_{sys, dom}ctl prototype Ian Campbell
2013-11-19 13:00 ` [PATCH v6 07/16] xen: arm: implement XEN_DOMCTL_set_address_size Ian Campbell
2013-11-19 13:00 ` [PATCH v6 08/16] xen: arm: implement arch_set_info_guest for 64-bit vcpus Ian Campbell
2013-11-19 13:00 ` [PATCH v6 09/16] tools: check for libfdt when building for ARM Ian Campbell
2013-11-19 13:00 ` [PATCH v6 10/16] xen: arm: define guest virtual platform in API headers Ian Campbell
2013-11-19 17:58   ` Julien Grall
2013-11-19 13:00 ` [PATCH v6 11/16] libxc: arm: rename various bits of zimage load with 32 suffix Ian Campbell
2013-11-19 13:00 ` [PATCH v6 12/16] libxc: allow caller to specify guest rambase rather than hardcoding Ian Campbell
2013-11-19 13:00 ` [PATCH v6 13/16] libxc: arm: allow passing a device tree blob to the guest Ian Campbell
2013-11-19 16:34   ` Julien Grall
2013-11-19 13:00 ` [PATCH v6 14/16] libxc: support for arm64 Image format Ian Campbell
2013-11-19 13:00 ` [PATCH v6 15/16] libxc: arm64 vcpu initialisation Ian Campbell
2013-11-19 13:00 ` [PATCH v6 16/16] libxl: build a device tree for ARM guests Ian Campbell
2013-11-19 15:45 ` [PATCH v6 00/16] xen: arm: 64-bit guest support and domU FDT autogeneration George Dunlap
2013-11-19 16:42   ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384866024-13108-3-git-send-email-ian.campbell@citrix.com \
    --to=ian.campbell@citrix.com \
    --cc=julien.grall@linaro.org \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).