xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@linaro.org>
To: xen-devel@lists.xenproject.org
Cc: stefano.stabellini@citrix.com,
	Julien Grall <julien.grall@linaro.org>,
	tim@xen.org, ian.campbell@citrix.com, patches@linaro.org
Subject: [PATCH for-4.5 6/8] xen/arm: IRQ: Add lock contrainst for gic_irq_{startup, shutdown}
Date: Fri, 24 Jan 2014 16:43:40 +0000	[thread overview]
Message-ID: <1390581822-32624-7-git-send-email-julien.grall@linaro.org> (raw)
In-Reply-To: <1390581822-32624-1-git-send-email-julien.grall@linaro.org>

When multiple action will be supported, gic_irq_{startup,shutdown} will have
to be called in the same critical zone has setup/release.
Otherwise it could have a race condition if at the same time CPU A is calling
release_dt_irq and CPU B is calling setup_dt_irq.

This could end up to the IRQ is not enabled.

Signed-off-by: Julien Grall <julien.grall@linaro.org>
---
 xen/arch/arm/gic.c |   40 +++++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 15 deletions(-)

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 2643b46..ebd2b5f 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -129,43 +129,53 @@ void gic_restore_state(struct vcpu *v)
     gic_restore_pending_irqs(v);
 }
 
-static void gic_irq_enable(struct irq_desc *desc)
+static unsigned int gic_irq_startup(struct irq_desc *desc)
 {
     int irq = desc->irq;
-    unsigned long flags;
 
-    spin_lock_irqsave(&desc->lock, flags);
+    ASSERT(spin_is_locked(&desc->lock));
+    ASSERT(!local_irq_is_enabled());
+
     spin_lock(&gic.lock);
     desc->status &= ~IRQ_DISABLED;
     dsb();
     /* Enable routing */
     GICD[GICD_ISENABLER + irq / 32] = (1u << (irq % 32));
     spin_unlock(&gic.lock);
-    spin_unlock_irqrestore(&desc->lock, flags);
+
+    return 0;
 }
 
-static void gic_irq_disable(struct irq_desc *desc)
+static void gic_irq_shutdown(struct irq_desc *desc)
 {
     int irq = desc->irq;
 
-    spin_lock(&desc->lock);
+    ASSERT(spin_is_locked(&desc->lock));
+    ASSERT(!local_irq_is_enabled());
+
     spin_lock(&gic.lock);
     /* Disable routing */
     GICD[GICD_ICENABLER + irq / 32] = (1u << (irq % 32));
     desc->status |= IRQ_DISABLED;
     spin_unlock(&gic.lock);
-    spin_unlock(&desc->lock);
 }
 
-static unsigned int gic_irq_startup(struct irq_desc *desc)
+static void gic_irq_enable(struct irq_desc *desc)
 {
-    gic_irq_enable(desc);
-    return 0;
+    unsigned long flags;
+
+    spin_lock_irqsave(&desc->lock, flags);
+    gic_irq_startup(desc);
+    spin_unlock_irqrestore(&desc->lock, flags);
 }
 
-static void gic_irq_shutdown(struct irq_desc *desc)
+static void gic_irq_disable(struct irq_desc *desc)
 {
-    gic_irq_disable(desc);
+    unsigned long flags;
+
+    spin_lock_irqsave(&desc->lock, flags);
+    gic_irq_shutdown(desc);
+    spin_unlock_irqrestore(&desc->lock, flags);
 }
 
 static void gic_irq_ack(struct irq_desc *desc)
@@ -528,9 +538,8 @@ void release_dt_irq(const struct dt_irq *irq, const void *dev_id)
 
     desc = irq_to_desc(irq->irq);
 
-    desc->handler->shutdown(desc);
-
     spin_lock_irqsave(&desc->lock,flags);
+    desc->handler->shutdown(desc);
     action = desc->action;
     desc->action  = NULL;
     desc->status &= ~IRQ_GUEST;
@@ -600,11 +609,12 @@ int __init setup_dt_irq(const struct dt_irq *irq, struct irqaction *new)
     }
 
     rc = __setup_irq(desc, irq->irq, new);
-    spin_unlock_irqrestore(&desc->lock, flags);
 
     if ( !rc )
         desc->handler->startup(desc);
 
+    spin_unlock_irqrestore(&desc->lock, flags);
+
     return rc;
 }
 
-- 
1.7.10.4

  parent reply	other threads:[~2014-01-24 16:43 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-24 16:43 [PATCH for-4.5 0/8] Interrupt management reworking Julien Grall
2014-01-24 16:43 ` [PATCH for-4.5 1/8] xen/arm: irq: move gic {, un}lock in gic_set_irq_properties Julien Grall
2014-02-19 11:23   ` Ian Campbell
2014-02-19 13:38     ` Julien Grall
2014-01-24 16:43 ` [PATCH for-4.5 2/8] xen/arm: setup_dt_irq: don't enable the IRQ if the creation has failed Julien Grall
2014-02-19 11:24   ` Ian Campbell
2014-03-12 14:48     ` Ian Campbell
2014-01-24 16:43 ` [PATCH for-4.5 3/8] xen/arm: IRQ: Protect IRQ to be shared between domains and XEN Julien Grall
2014-02-19 11:35   ` Ian Campbell
2014-02-19 13:59     ` Julien Grall
2014-01-24 16:43 ` [PATCH for-4.5 4/8] xen/arm: irq: Don't need to have a specific function to route IRQ to Xen Julien Grall
2014-02-19 11:45   ` Ian Campbell
2014-02-19 14:16     ` Julien Grall
2014-01-24 16:43 ` [PATCH for-4.5 5/8] xen/arm: IRQ: rename release_irq in release_dt_irq Julien Grall
2014-02-19 11:47   ` Ian Campbell
2014-02-19 14:23     ` Julien Grall
2014-01-24 16:43 ` Julien Grall [this message]
2014-02-19 11:51   ` [PATCH for-4.5 6/8] xen/arm: IRQ: Add lock contrainst for gic_irq_{startup, shutdown} Ian Campbell
2014-02-19 14:35     ` Julien Grall
2014-02-19 14:38       ` Ian Campbell
2014-02-19 14:51         ` Julien Grall
2014-02-19 15:07           ` Jan Beulich
2014-02-19 17:26             ` Julien Grall
2014-02-20 20:48             ` Julien Grall
2014-02-21  8:55               ` Jan Beulich
2014-02-21 13:19                 ` Julien Grall
2014-01-24 16:43 ` [PATCH for-4.5 7/8] xen/irq: Handle multiple action per IRQ Julien Grall
2014-02-19 11:55   ` Ian Campbell
2014-02-19 14:41     ` Julien Grall
2014-02-20 21:29     ` Julien Grall
2014-02-24 14:08       ` Julien Grall
2014-02-24 14:12         ` Ian Campbell
2014-02-24 14:32         ` Jan Beulich
2014-02-24 14:48           ` Julien Grall
2014-03-11 15:16             ` Julien Grall
2014-03-11 16:08               ` Jan Beulich
2014-03-17 19:06                 ` Stefano Stabellini
2014-03-17 21:05                   ` Julien Grall
2014-03-18  9:33                     ` Ian Campbell
2014-03-18 12:26                       ` Julien Grall
2014-03-18 14:06                         ` Stefano Stabellini
2014-03-18 14:54                           ` Julien Grall
2014-03-18 15:01                             ` Stefano Stabellini
2014-03-18 15:21                               ` Julien Grall
2014-03-18 15:39                                 ` Stefano Stabellini
2014-03-18 15:55                                   ` Julien Grall
2014-03-18 15:02                             ` Ian Campbell
2014-03-18 15:08                               ` Julien Grall
2014-03-18 15:10                                 ` Ian Campbell
2014-03-18 15:12                                   ` Julien Grall
2014-03-18 15:26                                     ` Ian Campbell
2014-03-19 17:18                                       ` Julien Grall
2014-03-21 14:06                                         ` Ian Campbell
2014-03-31 15:45     ` Julien Grall
2014-03-31 15:53       ` Ian Campbell
2014-03-31 16:02         ` Julien Grall
2014-04-01 12:29           ` Ian Campbell
2014-04-01 13:13             ` Julien Grall
2014-04-01 13:23               ` Ian Campbell
2014-04-01 13:52                 ` Julien Grall
2014-04-01 14:31                   ` Ian Campbell
2014-04-02 14:01                     ` Julien Grall
2014-01-24 16:43 ` [PATCH for-4.5 8/8] xen/serial: remove serial_dt_irq Julien Grall
2014-02-19 11:55   ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1390581822-32624-7-git-send-email-julien.grall@linaro.org \
    --to=julien.grall@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=patches@linaro.org \
    --cc=stefano.stabellini@citrix.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).