From: Eric Houby <ehouby@yahoo.com>
To: xen-devel@lists.xen.org, xen@lists.fedoraproject.org
Subject: [TestDay] F20 Xen 4.4 RC3 Spice support
Date: Tue, 04 Feb 2014 08:41:32 -0700 [thread overview]
Message-ID: <1391528492.2441.26.camel@astar.houby.net> (raw)
Xen list,
I am trying to boot a F20 guest and connect using Spice but have run
into an issue.
My VM config file includes:
spice = 1
spicehost='0.0.0.0'
spiceport=6001
spicedisable_ticketing=1
Is Spice supported with qemu-xen-traditional?
[root@xen ~]# xl -vvv create f20.xl
Parsing config from f20.xl
libxl: debug: libxl_create.c:1342:do_domain_create: ao 0x795750: create:
how=(nil) callback=(nil) poller=0x794e10
libxl: verbose: libxl_create.c:134:libxl__domain_build_info_setdefault:
qemu-xen is unavailable, use qemu-xen-traditional instead: No such file
or directory
libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk
vdev=hda spec.backend=unknown
libxl: debug: libxl_device.c:286:libxl__device_disk_set_backend: Disk
vdev=hda, using backend phy
libxl: debug: libxl_create.c:797:initiate_domain_create: running
bootloader
libxl: debug: libxl_bootloader.c:321:libxl__bootloader_run: not a PV
domain, skipping bootloader
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x795af8: deregister unregistered
libxl: debug: libxl_numa.c:475:libxl__get_numa_candidate: New best NUMA
placement candidate found: nr_nodes=1, nr_cpus=8, nr_vcpus=4,
free_memkb=14131
libxl: detail: libxl_dom.c:195:numa_place_domain: NUMA placement
candidate with 1 nodes, 8 cpus and 14131 KB free selected
xc: detail: elf_parse_binary: phdr: paddr=0x100000 memsz=0x9e704
xc: detail: elf_parse_binary: memory: 0x100000 -> 0x19e704
xc: detail: VIRTUAL MEMORY ARRANGEMENT:
Loader: 0000000000100000->000000000019e704
Modules: 0000000000000000->0000000000000000
TOTAL: 0000000000000000->00000000ffc00000
ENTRY ADDRESS: 0000000000100000
xc: detail: PHYSICAL MEMORY ALLOCATION:
4KB PAGES: 0x0000000000000200
2MB PAGES: 0x00000000000003fd
1GB PAGES: 0x0000000000000002
xc: detail: elf_load_binary: phdr 0 at 0x7f87b7100000 -> 0x7f87b719558d
libxl: debug: libxl_device.c:251:libxl__device_disk_set_backend: Disk
vdev=hda spec.backend=phy
libxl: debug: libxl_event.c:559:libxl__ev_xswatch_register: watch
w=0x796f68 wpath=/local/domain/0/backend/vbd/3/768/state token=3/0:
register slotnum=3
libxl: debug: libxl_create.c:1356:do_domain_create: ao 0x795750:
inprogress: poller=0x794e10, flags=i
libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x796f68
wpath=/local/domain/0/backend/vbd/3/768/state token=3/0: event
epath=/local/domain/0/backend/vbd/3/768/state
libxl: debug: libxl_event.c:646:devstate_watch_callback:
backend /local/domain/0/backend/vbd/3/768/state wanted state 2 still
waiting state 1
libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x796f68
wpath=/local/domain/0/backend/vbd/3/768/state token=3/0: event
epath=/local/domain/0/backend/vbd/3/768/state
libxl: debug: libxl_event.c:642:devstate_watch_callback:
backend /local/domain/0/backend/vbd/3/768/state wanted state 2 ok
libxl: debug: libxl_event.c:595:libxl__ev_xswatch_deregister: watch
w=0x796f68 wpath=/local/domain/0/backend/vbd/3/768/state token=3/0:
deregister slotnum=3
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x796f68: deregister unregistered
libxl: debug: libxl_device.c:1022:device_hotplug: calling hotplug
script: /etc/xen/scripts/block add
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x796ff0: deregister unregistered
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x796ff0: deregister unregistered
libxl: debug: libxl_dm.c:1303:libxl__spawn_local_dm: Spawning
device-model /usr/lib/xen/bin/qemu-dm with arguments:
libxl: debug:
libxl_dm.c:1305:libxl__spawn_local_dm: /usr/lib/xen/bin/qemu-dm
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -d
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: 3
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -domain-name
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: f20
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -videoram
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: 4
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -boot
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: c
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -acpi
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -vcpus
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: 2
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -vcpu_avail
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: 0x03
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -net
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm:
nic,vlan=0,macaddr=00:16:00:00:11:22,model=e1000
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -net
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm:
tap,vlan=0,ifname=vif3.0-emu,bridge=br0,script=no,downscript=no
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: -M
libxl: debug: libxl_dm.c:1305:libxl__spawn_local_dm: xenfv
libxl: debug: libxl_event.c:559:libxl__ev_xswatch_register: watch
w=0x795d30 wpath=/local/domain/0/device-model/3/state token=3/1:
register slotnum=3
libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x795d30
wpath=/local/domain/0/device-model/3/state token=3/1: event
epath=/local/domain/0/device-model/3/state
libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x795d30
wpath=/local/domain/0/device-model/3/state token=3/1: event
epath=/local/domain/0/device-model/3/state
libxl: debug: libxl_event.c:595:libxl__ev_xswatch_deregister: watch
w=0x795d30 wpath=/local/domain/0/device-model/3/state token=3/1:
deregister slotnum=3
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x795d30: deregister unregistered
libxl: debug: libxl_event.c:559:libxl__ev_xswatch_register: watch
w=0x79a038 wpath=/local/domain/0/backend/vif/3/0/state token=3/2:
register slotnum=3
libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x79a038
wpath=/local/domain/0/backend/vif/3/0/state token=3/2: event
epath=/local/domain/0/backend/vif/3/0/state
libxl: debug: libxl_event.c:646:devstate_watch_callback:
backend /local/domain/0/backend/vif/3/0/state wanted state 2 still
waiting state 1
libxl: debug: libxl_event.c:503:watchfd_callback: watch w=0x79a038
wpath=/local/domain/0/backend/vif/3/0/state token=3/2: event
epath=/local/domain/0/backend/vif/3/0/state
libxl: debug: libxl_event.c:642:devstate_watch_callback:
backend /local/domain/0/backend/vif/3/0/state wanted state 2 ok
libxl: debug: libxl_event.c:595:libxl__ev_xswatch_deregister: watch
w=0x79a038 wpath=/local/domain/0/backend/vif/3/0/state token=3/2:
deregister slotnum=3
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x79a038: deregister unregistered
libxl: debug: libxl_device.c:1022:device_hotplug: calling hotplug
script: /etc/xen/scripts/vif-bridge online
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x79a0c0: deregister unregistered
libxl: debug: libxl_device.c:1022:device_hotplug: calling hotplug
script: /etc/xen/scripts/vif-bridge add
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x79a0c0: deregister unregistered
libxl: debug: libxl_event.c:607:libxl__ev_xswatch_deregister: watch
w=0x79a0c0: deregister unregistered
libxl: debug: libxl_event.c:1729:libxl__ao_progress_report: ao 0x795750:
progress report: ignored
libxl: debug: libxl_event.c:1559:libxl__ao_complete: ao 0x795750:
complete, rc=0
libxl: debug: libxl_event.c:1531:libxl__ao__destroy: ao 0x795750:
destroy
xc: debug: hypercall buffer: total allocations:1097 total releases:1097
xc: debug: hypercall buffer: current allocations:0 maximum allocations:4
xc: debug: hypercall buffer: cache current size:4
xc: debug: hypercall buffer: cache hits:1089 misses:4 toobig:4
[root@xen ~]#
The QEMU command line created is:
/usr/lib/xen/bin/qemu-dm -d 3 -domain-name f20 -videoram 4 -boot c -acpi
-vcpus 2 -vcpu_avail 0x03 -net
nic,vlan=0,macaddr=00:16:00:00:11:22,model=e1000 -net
tap,vlan=0,ifname=vif3.0-emu,bridge=br0,script=no,downscript=no -M xenfv
Thanks,
Eric
next reply other threads:[~2014-02-04 15:41 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-04 15:41 Eric Houby [this message]
2014-02-04 16:01 ` [TestDay] F20 Xen 4.4 RC3 Spice support Fabio Fantoni
2014-02-05 4:00 ` Eric Houby
2014-02-05 8:06 ` Sander Eikelenboom
2014-02-06 0:17 ` Eric Houby
2014-02-06 4:23 ` Eric Houby
2014-02-06 7:35 ` Fabio Fantoni
2014-02-07 5:03 ` Eric Houby
2014-02-07 7:23 ` Fabio Fantoni
2014-02-07 9:08 ` Dario Faggioli
2014-02-07 10:52 ` Fabio Fantoni
2014-02-07 23:37 ` Eric Houby
2014-02-08 8:56 ` Fabio Fantoni
2014-02-06 0:30 ` Dario Faggioli
2014-02-10 17:05 ` George Dunlap
2014-02-11 9:56 ` Fabio Fantoni
2014-03-13 14:47 ` Fabio Fantoni
2014-04-10 12:26 ` Fabio Fantoni
2014-04-10 16:21 ` George Dunlap
2014-04-11 7:52 ` Fabio Fantoni
2014-04-11 11:55 ` George Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1391528492.2441.26.camel@astar.houby.net \
--to=ehouby@yahoo.com \
--cc=xen-devel@lists.xen.org \
--cc=xen@lists.fedoraproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).