From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Keir Fraser <keir@xen.org>,
Ian Campbell <ian.campbell@citrix.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Tim Deegan <tim@xen.org>,
Stefano Stabellini <stefano.stabellini@citrix.com>,
Jan Beulich <JBeulich@suse.com>
Subject: [PATCH v3 5/5] xen/console: Traditional console timestamps including milliseconds
Date: Thu, 6 Mar 2014 19:28:05 +0000 [thread overview]
Message-ID: <1394134085-22952-6-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1394134085-22952-1-git-send-email-andrew.cooper3@citrix.com>
Suggested-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Keir Fraser <keir@xen.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Stefano Stabellini <stefano.stabellini@citrix.com>
CC: Tim Deegan <tim@xen.org>
---
The change in arm is only for the sake of compilation - the function is a
no-op.
---
docs/misc/xen-command-line.markdown | 4 +++-
xen/arch/arm/time.c | 2 +-
xen/arch/x86/time.c | 10 +++++++---
xen/drivers/char/console.c | 11 ++++++++++-
xen/include/xen/time.h | 2 +-
5 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/docs/misc/xen-command-line.markdown b/docs/misc/xen-command-line.markdown
index 98c9e5e..89dc484 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -275,7 +275,7 @@ cleared. This allows a single port to be shared by two subsystems
makes sense on its own.
### console\_timestamps
-> `= none | date | boot`
+> `= none | date | datems | boot`
> Default: `boot`
@@ -284,6 +284,8 @@ Specify which timestamp format Xen should use for each console line.
* `none`: No timestamps
* `date`: Date and time information
* `[YYYY-MM-DD HH:MM:SS]`
+* `datems`: Date and time, with milliseconds
+ * `[YYYY-MM-DD HH:MM:SS.mmm]`
* `boot`: Seconds and microseconds since boot
* `[SSSSSS.uuuuuu]`
diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index 81e3e28..22e94bb 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -282,7 +282,7 @@ void domain_set_time_offset(struct domain *d, int32_t time_offset_seconds)
/* XXX update guest visible wallclock time */
}
-struct tm wallclock_time(void)
+struct tm wallclock_time(uint64_t *ns)
{
return (struct tm) { 0 };
}
diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
index 4f4de22..1156ccc 100644
--- a/xen/arch/x86/time.c
+++ b/xen/arch/x86/time.c
@@ -1646,15 +1646,19 @@ int dom0_pit_access(struct ioreq *ioreq)
return 0;
}
-struct tm wallclock_time(void)
+struct tm wallclock_time(uint64_t *ns)
{
- uint64_t seconds;
+ uint64_t seconds, nsec;
if ( !wc_sec )
return (struct tm) { 0 };
seconds = NOW() + SECONDS(wc_sec) + wc_nsec;
- do_div(seconds, 1000000000);
+ nsec = do_div(seconds, 1000000000);
+
+ if ( *ns )
+ *ns = nsec;
+
return gmtime(seconds);
}
diff --git a/xen/drivers/char/console.c b/xen/drivers/char/console.c
index 60461b9..837e8a8 100644
--- a/xen/drivers/char/console.c
+++ b/xen/drivers/char/console.c
@@ -53,6 +53,7 @@ enum con_timestamp_mode
{
TSM_NONE, /* No timestamps */
TSM_DATE, /* [YYYY-MM-DD HH:MM:SS] */
+ TSM_DATE_MS, /* [YYYY-MM-DD HH:MM:SS.mmm] */
TSM_BOOT /* [SSSSSS.uuuuuu] */
};
@@ -560,6 +561,8 @@ static void __init parse_console_timestamps(char *s)
if ( *s == '\0' || /* Compat for old booleanparam() */
!strcmp(s, "date") )
opt_con_timestamp_mode = TSM_DATE;
+ else if ( !strcmp(s, "datems") )
+ opt_con_timestamp_mode = TSM_DATE_MS;
else if ( !strcmp(s, "boot") )
opt_con_timestamp_mode = TSM_BOOT;
else if ( !strcmp(s, "none") )
@@ -579,7 +582,8 @@ static void printk_start_of_line(const char *prefix)
switch ( opt_con_timestamp_mode )
{
case TSM_DATE:
- tm = wallclock_time();
+ case TSM_DATE_MS:
+ tm = wallclock_time(&nsec);
if ( tm.tm_mday == 0 )
return;
@@ -588,6 +592,11 @@ static void printk_start_of_line(const char *prefix)
snprintf(tstr, sizeof(tstr), "[%04u-%02u-%02u %02u:%02u:%02u] ",
1900 + tm.tm_year, tm.tm_mon + 1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
+ else
+ snprintf(tstr, sizeof(tstr),
+ "[%04u-%02u-%02u %02u:%02u:%02u.%03"PRIu64"] ",
+ 1900 + tm.tm_year, tm.tm_mon + 1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec, nsec / 1000000);
break;
case TSM_BOOT:
diff --git a/xen/include/xen/time.h b/xen/include/xen/time.h
index 3eb5b63..2703454 100644
--- a/xen/include/xen/time.h
+++ b/xen/include/xen/time.h
@@ -48,7 +48,7 @@ struct tm {
int tm_isdst; /* daylight saving time */
};
struct tm gmtime(unsigned long t);
-struct tm wallclock_time(void);
+struct tm wallclock_time(uint64_t *ns);
#define SYSTEM_TIME_HZ 1000000000ULL
#define NOW() ((s_time_t)get_s_time())
--
1.7.10.4
next prev parent reply other threads:[~2014-03-06 19:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 19:28 [PATCH v3 0/5] Improvements to console timestamps Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 1/5] xen/time: Move wallclock_time() declaration into common code Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 2/5] x86/time: Always count s_time from Xen boot Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 3/5] x86/time: Initialise time earlier during start_secondary() Andrew Cooper
2014-03-06 19:28 ` [PATCH v3 4/5] xen/console: Provide timestamps as an offset since boot Andrew Cooper
2014-03-07 9:47 ` Jan Beulich
2014-03-07 10:27 ` Andrew Cooper
2014-03-06 19:28 ` Andrew Cooper [this message]
2014-03-06 23:54 ` [PATCH v3 5/5] xen/console: Traditional console timestamps including milliseconds Don Slutz
2014-03-07 0:41 ` Andrew Cooper
2014-03-07 23:33 ` Don Slutz
2014-03-11 10:43 ` Ian Campbell
2014-03-11 11:32 ` Andrew Cooper
2014-03-11 11:39 ` Tim Deegan
2014-03-11 12:47 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394134085-22952-6-git-send-email-andrew.cooper3@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=JBeulich@suse.com \
--cc=ian.campbell@citrix.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).