xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@linaro.org>
To: xen-devel@lists.xenproject.org
Cc: stefano.stabellini@citrix.com,
	Julien Grall <julien.grall@linaro.org>,
	tim@xen.org, ian.campbell@citrix.com
Subject: [PATCH v2 09/16] xen/arm: IRQ: Add lock contrainst for gic_irq_{startup, shutdown}
Date: Thu,  3 Apr 2014 21:42:00 +0100	[thread overview]
Message-ID: <1396557727-19102-10-git-send-email-julien.grall@linaro.org> (raw)
In-Reply-To: <1396557727-19102-1-git-send-email-julien.grall@linaro.org>

When multiple action will be supported, gic_irq_{startup,shutdown} will have
to be called in the same critical zone as setup/release.
Otherwise it could have a race condition if at the same time CPU A is calling
release_dt_irq and CPU B is calling setup_dt_irq.

This could end up to the IRQ not being enabled.

Signed-off-by: Julien Grall <julien.grall@linaro.org>

---
    Changes in v2:
        - Fix typoes in commit message
        - Move this patch earlier in the series => move shutdown() in
        release_irq and gic_route_irq
---
 xen/arch/arm/gic.c |   39 ++++++++++++++++++++++++---------------
 xen/arch/arm/irq.c |    6 ++++--
 2 files changed, 28 insertions(+), 17 deletions(-)

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 82e0316..8c53e52 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -123,44 +123,53 @@ void gic_restore_state(struct vcpu *v)
     gic_restore_pending_irqs(v);
 }
 
-static void gic_irq_enable(struct irq_desc *desc)
+static unsigned int gic_irq_startup(struct irq_desc *desc)
 {
     int irq = desc->irq;
-    unsigned long flags;
 
-    spin_lock_irqsave(&desc->lock, flags);
+    ASSERT(spin_is_locked(&desc->lock));
+    ASSERT(!local_irq_is_enabled());
+
     spin_lock(&gic.lock);
     desc->status &= ~IRQ_DISABLED;
     dsb(sy);
     /* Enable routing */
     GICD[GICD_ISENABLER + irq / 32] = (1u << (irq % 32));
     spin_unlock(&gic.lock);
-    spin_unlock_irqrestore(&desc->lock, flags);
+
+    return 0;
 }
 
-static void gic_irq_disable(struct irq_desc *desc)
+static void gic_irq_shutdown(struct irq_desc *desc)
 {
     int irq = desc->irq;
-    unsigned long flags;
 
-    spin_lock_irqsave(&desc->lock, flags);
+    ASSERT(spin_is_locked(&desc->lock));
+    ASSERT(!local_irq_is_enabled());
+
     spin_lock(&gic.lock);
     /* Disable routing */
     GICD[GICD_ICENABLER + irq / 32] = (1u << (irq % 32));
     desc->status |= IRQ_DISABLED;
     spin_unlock(&gic.lock);
-    spin_unlock_irqrestore(&desc->lock, flags);
 }
 
-static unsigned int gic_irq_startup(struct irq_desc *desc)
+static void gic_irq_enable(struct irq_desc *desc)
 {
-    gic_irq_enable(desc);
-    return 0;
+    unsigned long flags;
+
+    spin_lock_irqsave(&desc->lock, flags);
+    gic_irq_startup(desc);
+    spin_unlock_irqrestore(&desc->lock, flags);
 }
 
-static void gic_irq_shutdown(struct irq_desc *desc)
+static void gic_irq_disable(struct irq_desc *desc)
 {
-    gic_irq_disable(desc);
+    unsigned long flags;
+
+    spin_lock_irqsave(&desc->lock, flags);
+    gic_irq_shutdown(desc);
+    spin_unlock_irqrestore(&desc->lock, flags);
 }
 
 static void gic_irq_ack(struct irq_desc *desc)
@@ -261,11 +270,11 @@ static int gic_route_irq(unsigned int irq, bool_t level,
     if ( desc->action != NULL )
         return -EBUSY;
 
+    spin_lock_irqsave(&desc->lock, flags);
+
     /* Disable interrupt */
     desc->handler->shutdown(desc);
 
-    spin_lock_irqsave(&desc->lock, flags);
-
     desc->handler = &gic_host_irq_type;
 
     gic_set_irq_properties(irq, level, cpu_mask, priority);
diff --git a/xen/arch/arm/irq.c b/xen/arch/arm/irq.c
index 5111b90..798353b 100644
--- a/xen/arch/arm/irq.c
+++ b/xen/arch/arm/irq.c
@@ -214,9 +214,10 @@ void release_irq(unsigned int irq)
 
     desc = irq_to_desc(irq);
 
+    spin_lock_irqsave(&desc->lock,flags);
+
     desc->handler->shutdown(desc);
 
-    spin_lock_irqsave(&desc->lock,flags);
     action = desc->action;
     desc->action  = NULL;
     desc->status &= ~IRQ_GUEST;
@@ -251,11 +252,12 @@ int setup_dt_irq(const struct dt_irq *irq, struct irqaction *new)
 
     spin_lock_irqsave(&desc->lock, flags);
     rc = __setup_irq(desc, new);
-    spin_unlock_irqrestore(&desc->lock, flags);
 
     if ( !rc )
         desc->handler->startup(desc);
 
+    spin_unlock_irqrestore(&desc->lock, flags);
+
     return rc;
 }
 
-- 
1.7.10.4

  parent reply	other threads:[~2014-04-03 20:42 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-03 20:41 [PATCH v2 00/16] Interrupt management reworking Julien Grall
2014-04-03 20:41 ` [PATCH v2 01/16] xen/arm: timer: replace timer_dt_irq by timer_get_irq Julien Grall
2014-04-07 13:10   ` Ian Campbell
2014-04-07 13:24     ` Julien Grall
2014-04-03 20:41 ` [PATCH v2 02/16] xen/arm: IRQ: Use default irq callback from common code for no_irq_type Julien Grall
2014-04-07 13:10   ` Ian Campbell
2014-04-03 20:41 ` [PATCH v2 03/16] xen/arm: IRQ: Rename irq_cfg into arch_irq_desc Julien Grall
2014-04-07 13:10   ` Ian Campbell
2014-04-03 20:41 ` [PATCH v2 04/16] xen/arm: IRQ: move gic {, un}lock in gic_set_irq_properties Julien Grall
2014-04-03 20:41 ` [PATCH v2 05/16] xen/arm: IRQ: drop irq parameter in __setup_irq Julien Grall
2014-04-07 13:05   ` Ian Campbell
2014-04-07 13:26     ` Julien Grall
2014-04-03 20:41 ` [PATCH v2 06/16] xen/arm: IRQ: remove __init from setup_dt_irq, request_dt_irq and release_irq Julien Grall
2014-04-07 13:11   ` Ian Campbell
2014-04-03 20:41 ` [PATCH v2 07/16] xen/arm: IRQ: Move IRQ management from gic.c to irq.c Julien Grall
2014-04-07 13:07   ` Ian Campbell
2014-04-07 13:34     ` Julien Grall
2014-04-03 20:41 ` [PATCH v2 08/16] xen/arm: IRQ Introduce irq_get_domain Julien Grall
2014-04-07 13:15   ` Ian Campbell
2014-04-07 13:44     ` Julien Grall
2014-04-03 20:42 ` Julien Grall [this message]
2014-04-07 13:27   ` [PATCH v2 09/16] xen/arm: IRQ: Add lock contrainst for gic_irq_{startup, shutdown} Ian Campbell
2014-04-07 14:45     ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 10/16] xen/arm: IRQ: Don't need to have a specific function to route IRQ to Xen Julien Grall
2014-04-07 13:53   ` Ian Campbell
2014-04-07 14:15     ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 11/16] xen/arm: IRQ: Protect IRQ to be shared between domains and XEN Julien Grall
2014-04-07 14:46   ` Ian Campbell
2014-04-07 14:53     ` Julien Grall
2014-04-07 15:12       ` Ian Campbell
2014-04-07 15:32         ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 12/16] xen/serial: remove serial_dt_irq Julien Grall
2014-04-07 14:49   ` Ian Campbell
2014-04-03 20:42 ` [PATCH v2 13/16] xen/arm: IRQ: Store IRQ type in arch_irq_desc Julien Grall
2014-04-07 15:03   ` Ian Campbell
2014-04-07 16:06     ` Julien Grall
2014-04-07 16:26       ` Ian Campbell
2014-04-08 11:46         ` Julien Grall
2014-04-08 15:30           ` Ian Campbell
2014-04-08 15:50             ` Julien Grall
2014-04-08 15:54               ` Ian Campbell
2014-04-03 20:42 ` [PATCH v2 14/16] xen/arm: IRQ: Replace {request, setup}_dt_irq by {request, setup}_irq Julien Grall
2014-04-07 15:06   ` Ian Campbell
2014-04-07 16:11     ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 15/16] xen: IRQ: Add dev_id parameter to release_irq Julien Grall
2014-04-04  7:47   ` Jan Beulich
2014-04-04  8:39     ` Julien Grall
2014-04-07 15:08   ` Ian Campbell
2014-04-03 20:42 ` [PATCH v2 16/16] xen/arm: IRQ: Handle multiple action per IRQ Julien Grall
2014-04-04  7:59   ` Jan Beulich
2014-04-04  8:52     ` Julien Grall
2014-04-04  9:00       ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396557727-19102-10-git-send-email-julien.grall@linaro.org \
    --to=julien.grall@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=stefano.stabellini@citrix.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).