xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@linaro.org>
To: xen-devel@lists.xenproject.org
Cc: stefano.stabellini@citrix.com,
	Julien Grall <julien.grall@linaro.org>,
	tim@xen.org, ian.campbell@citrix.com
Subject: [PATCH v2 10/16] xen/arm: IRQ: Don't need to have a specific function to route IRQ to Xen
Date: Thu,  3 Apr 2014 21:42:01 +0100	[thread overview]
Message-ID: <1396557727-19102-11-git-send-email-julien.grall@linaro.org> (raw)
In-Reply-To: <1396557727-19102-1-git-send-email-julien.grall@linaro.org>

When the IRQ is handling by Xen, the setup is done in 2 steps:
    - Route the IRQ to the current CPU and set priorities
    - Set up the handler

For PPIs, these steps are called on every cpu. For SPIs, they are only called
on the boot CPU.

Dividing the setup in two step complicates the code when a new driver is
added to Xen (for instance a SMMU driver). Xen can safely route the IRQ
when the driver sets up the interrupt handler.

Signed-off-by: Julien Grall <julien.grall@linaro.org>

---
    Changes in v2:
        - Fix typo in commit message
        - s/SGI/SPI/ in comments
        - Rename gic_route_dt_irq into gic_route_irq_to_xen which is
        taking a desc now
        - Call setup_irq before initializing the GIC IRQ as the first one
        can fail.
---
 xen/arch/arm/gic.c         |   63 +++++++-------------------------------------
 xen/arch/arm/irq.c         |   24 ++++++++++++++++-
 xen/arch/arm/setup.c       |    2 --
 xen/arch/arm/smpboot.c     |    2 --
 xen/arch/arm/time.c        |   11 --------
 xen/include/asm-arm/gic.h  |   10 +++----
 xen/include/asm-arm/time.h |    3 ---
 7 files changed, 36 insertions(+), 79 deletions(-)

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 8c53e52..9127ecf 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -257,30 +257,20 @@ static void gic_set_irq_properties(unsigned int irq, bool_t level,
     spin_unlock(&gic.lock);
 }
 
-/* Program the GIC to route an interrupt */
-static int gic_route_irq(unsigned int irq, bool_t level,
-                         const cpumask_t *cpu_mask, unsigned int priority)
+/* Program the GIC to route an interrupt to the host (eg Xen)
+ * - needs to be called with desc.lock held
+ */
+void gic_route_irq_to_xen(struct irq_desc *desc, bool_t level,
+                          const cpumask_t *cpu_mask, unsigned int priority)
 {
-    struct irq_desc *desc = irq_to_desc(irq);
-    unsigned long flags;
-
     ASSERT(priority <= 0xff);     /* Only 8 bits of priority */
-    ASSERT(irq < gic.lines);      /* Can't route interrupts that don't exist */
-
-    if ( desc->action != NULL )
-        return -EBUSY;
-
-    spin_lock_irqsave(&desc->lock, flags);
-
-    /* Disable interrupt */
-    desc->handler->shutdown(desc);
+    ASSERT(desc->irq < gic.lines);/* Can't route interrupts that don't exist */
+    ASSERT(desc->status & IRQ_DISABLED);
+    ASSERT(spin_is_locked(&desc->lock));
 
     desc->handler = &gic_host_irq_type;
 
-    gic_set_irq_properties(irq, level, cpu_mask, priority);
-
-    spin_unlock_irqrestore(&desc->lock, flags);
-    return 0;
+    gic_set_irq_properties(desc->irq, level, cpu_mask, priority);
 }
 
 /* Program the GIC to route an interrupt to a guest
@@ -304,17 +294,6 @@ void gic_route_irq_to_guest(struct domain *d, struct irq_desc *desc,
     p->desc = desc;
 }
 
-/* Program the GIC to route an interrupt with a dt_irq */
-void gic_route_dt_irq(const struct dt_irq *irq, const cpumask_t *cpu_mask,
-                      unsigned int priority)
-{
-    bool_t level;
-
-    level = dt_irq_is_level_triggered(irq);
-
-    gic_route_irq(irq->irq, level, cpu_mask, priority);
-}
-
 static void __init gic_dist_init(void)
 {
     uint32_t type;
@@ -568,30 +547,6 @@ void gic_disable_cpu(void)
     spin_unlock(&gic.lock);
 }
 
-void gic_route_ppis(void)
-{
-    /* GIC maintenance */
-    gic_route_dt_irq(&gic.maintenance, cpumask_of(smp_processor_id()),
-                     GIC_PRI_IRQ);
-    /* Route timer interrupt */
-    route_timer_interrupt();
-}
-
-void gic_route_spis(void)
-{
-    int seridx;
-    const struct dt_irq *irq;
-
-    for ( seridx = 0; seridx <= SERHND_IDX; seridx++ )
-    {
-        if ( (irq = serial_dt_irq(seridx)) == NULL )
-            continue;
-
-        gic_route_dt_irq(irq, cpumask_of(smp_processor_id()),
-                         GIC_PRI_IRQ);
-    }
-}
-
 static inline void gic_set_lr(int lr, struct pending_irq *p,
         unsigned int state)
 {
diff --git a/xen/arch/arm/irq.c b/xen/arch/arm/irq.c
index 798353b..1262a9c 100644
--- a/xen/arch/arm/irq.c
+++ b/xen/arch/arm/irq.c
@@ -247,15 +247,37 @@ int setup_dt_irq(const struct dt_irq *irq, struct irqaction *new)
     int rc;
     unsigned long flags;
     struct irq_desc *desc;
+    bool_t disabled = 0;
 
     desc = irq_to_desc(irq->irq);
 
     spin_lock_irqsave(&desc->lock, flags);
+
+    disabled = (desc->action == NULL);
+
     rc = __setup_irq(desc, new);
+    if ( rc )
+        goto err;
 
-    if ( !rc )
+    /* First time the IRQ is setup */
+    if ( disabled )
+    {
+        bool_t level;
+
+        level = dt_irq_is_level_triggered(irq);
+        /* It's fine to use smp_processor_id() because:
+         * For PPI: irq_desc is banked
+         * For SPI: we don't care for now which CPU will receive the
+         * interrupt
+         * TODO: Handle case where SPI is setup on different CPU than
+         * the targeted CPU and the priority.
+         */
+        gic_route_irq_to_xen(desc, level, cpumask_of(smp_processor_id()),
+                             GIC_PRI_IRQ);
         desc->handler->startup(desc);
+    }
 
+err:
     spin_unlock_irqrestore(&desc->lock, flags);
 
     return rc;
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 0892a54..7b02282 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -718,8 +718,6 @@ void __init start_xen(unsigned long boot_phys_offset,
 
     init_IRQ();
 
-    gic_route_ppis();
-    gic_route_spis();
     xsm_dt_init();
 
     init_maintenance_interrupt();
diff --git a/xen/arch/arm/smpboot.c b/xen/arch/arm/smpboot.c
index 7f28b68..cf149da 100644
--- a/xen/arch/arm/smpboot.c
+++ b/xen/arch/arm/smpboot.c
@@ -287,8 +287,6 @@ void __cpuinit start_secondary(unsigned long boot_phys_offset,
 
     init_secondary_IRQ();
 
-    gic_route_ppis();
-
     init_maintenance_interrupt();
     init_timer_interrupt();
 
diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index 7cad888..ce96337 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -218,17 +218,6 @@ static void vtimer_interrupt(int irq, void *dev_id, struct cpu_user_regs *regs)
     vgic_vcpu_inject_irq(current, current->arch.virt_timer.irq, 1);
 }
 
-/* Route timer's IRQ on this CPU */
-void __cpuinit route_timer_interrupt(void)
-{
-    gic_route_dt_irq(&timer_irq[TIMER_PHYS_NONSECURE_PPI],
-                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
-    gic_route_dt_irq(&timer_irq[TIMER_HYP_PPI],
-                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
-    gic_route_dt_irq(&timer_irq[TIMER_VIRT_PPI],
-                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
-}
-
 /* Set up the timer interrupt on this CPU */
 void __cpuinit init_timer_interrupt(void)
 {
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 0e6e325..b750b17 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -167,15 +167,13 @@ extern void vgic_vcpu_inject_irq(struct vcpu *v, unsigned int irq,int virtual);
 extern void vgic_clear_pending_irqs(struct vcpu *v);
 extern struct pending_irq *irq_to_pending(struct vcpu *v, unsigned int irq);
 
-/* Program the GIC to route an interrupt with a dt_irq */
-extern void gic_route_dt_irq(const struct dt_irq *irq,
-                             const cpumask_t *cpu_mask,
-                             unsigned int priority);
+/* Program the GIC to route an interrupt */
+extern void gic_route_irq_to_xen(struct irq_desc *desc, bool_t level,
+                                 const cpumask_t *cpu_mask,
+                                 unsigned int priority);
 extern void gic_route_irq_to_guest(struct domain *, struct irq_desc *desc,
                                    bool_t level, const cpumask_t *cpu_mask,
                                    unsigned int priority);
-extern void gic_route_ppis(void);
-extern void gic_route_spis(void);
 
 extern void gic_inject(void);
 extern void gic_clear_pending_irqs(struct vcpu *v);
diff --git a/xen/include/asm-arm/time.h b/xen/include/asm-arm/time.h
index 9bbab0b..d544b5b 100644
--- a/xen/include/asm-arm/time.h
+++ b/xen/include/asm-arm/time.h
@@ -25,9 +25,6 @@ enum timer_ppi
 /* Get one of the timer IRQ number */
 unsigned int timer_get_irq(enum timer_ppi ppi);
 
-/* Route timer's IRQ on this CPU */
-extern void __cpuinit route_timer_interrupt(void);
-
 /* Set up the timer interrupt on this CPU */
 extern void __cpuinit init_timer_interrupt(void);
 
-- 
1.7.10.4

  parent reply	other threads:[~2014-04-03 20:42 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-03 20:41 [PATCH v2 00/16] Interrupt management reworking Julien Grall
2014-04-03 20:41 ` [PATCH v2 01/16] xen/arm: timer: replace timer_dt_irq by timer_get_irq Julien Grall
2014-04-07 13:10   ` Ian Campbell
2014-04-07 13:24     ` Julien Grall
2014-04-03 20:41 ` [PATCH v2 02/16] xen/arm: IRQ: Use default irq callback from common code for no_irq_type Julien Grall
2014-04-07 13:10   ` Ian Campbell
2014-04-03 20:41 ` [PATCH v2 03/16] xen/arm: IRQ: Rename irq_cfg into arch_irq_desc Julien Grall
2014-04-07 13:10   ` Ian Campbell
2014-04-03 20:41 ` [PATCH v2 04/16] xen/arm: IRQ: move gic {, un}lock in gic_set_irq_properties Julien Grall
2014-04-03 20:41 ` [PATCH v2 05/16] xen/arm: IRQ: drop irq parameter in __setup_irq Julien Grall
2014-04-07 13:05   ` Ian Campbell
2014-04-07 13:26     ` Julien Grall
2014-04-03 20:41 ` [PATCH v2 06/16] xen/arm: IRQ: remove __init from setup_dt_irq, request_dt_irq and release_irq Julien Grall
2014-04-07 13:11   ` Ian Campbell
2014-04-03 20:41 ` [PATCH v2 07/16] xen/arm: IRQ: Move IRQ management from gic.c to irq.c Julien Grall
2014-04-07 13:07   ` Ian Campbell
2014-04-07 13:34     ` Julien Grall
2014-04-03 20:41 ` [PATCH v2 08/16] xen/arm: IRQ Introduce irq_get_domain Julien Grall
2014-04-07 13:15   ` Ian Campbell
2014-04-07 13:44     ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 09/16] xen/arm: IRQ: Add lock contrainst for gic_irq_{startup, shutdown} Julien Grall
2014-04-07 13:27   ` Ian Campbell
2014-04-07 14:45     ` Julien Grall
2014-04-03 20:42 ` Julien Grall [this message]
2014-04-07 13:53   ` [PATCH v2 10/16] xen/arm: IRQ: Don't need to have a specific function to route IRQ to Xen Ian Campbell
2014-04-07 14:15     ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 11/16] xen/arm: IRQ: Protect IRQ to be shared between domains and XEN Julien Grall
2014-04-07 14:46   ` Ian Campbell
2014-04-07 14:53     ` Julien Grall
2014-04-07 15:12       ` Ian Campbell
2014-04-07 15:32         ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 12/16] xen/serial: remove serial_dt_irq Julien Grall
2014-04-07 14:49   ` Ian Campbell
2014-04-03 20:42 ` [PATCH v2 13/16] xen/arm: IRQ: Store IRQ type in arch_irq_desc Julien Grall
2014-04-07 15:03   ` Ian Campbell
2014-04-07 16:06     ` Julien Grall
2014-04-07 16:26       ` Ian Campbell
2014-04-08 11:46         ` Julien Grall
2014-04-08 15:30           ` Ian Campbell
2014-04-08 15:50             ` Julien Grall
2014-04-08 15:54               ` Ian Campbell
2014-04-03 20:42 ` [PATCH v2 14/16] xen/arm: IRQ: Replace {request, setup}_dt_irq by {request, setup}_irq Julien Grall
2014-04-07 15:06   ` Ian Campbell
2014-04-07 16:11     ` Julien Grall
2014-04-03 20:42 ` [PATCH v2 15/16] xen: IRQ: Add dev_id parameter to release_irq Julien Grall
2014-04-04  7:47   ` Jan Beulich
2014-04-04  8:39     ` Julien Grall
2014-04-07 15:08   ` Ian Campbell
2014-04-03 20:42 ` [PATCH v2 16/16] xen/arm: IRQ: Handle multiple action per IRQ Julien Grall
2014-04-04  7:59   ` Jan Beulich
2014-04-04  8:52     ` Julien Grall
2014-04-04  9:00       ` Jan Beulich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396557727-19102-11-git-send-email-julien.grall@linaro.org \
    --to=julien.grall@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=stefano.stabellini@citrix.com \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).